Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTERCEPTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

The dust distribution within the inner coma of comet P/Halley 1982i - Encounter by Giotto's impact detectors

Analyses are presented of Giotto's Dust Impact Detection System experiment measurements of dust grains incident on the Giotto dust shield along its trajectory through the coma of comet P/Halley on March 13 and 14, 1986. Ground-based CCD imagery of the inner coma dust continuum at the time of the encounter are used to derive the area of grains intercepted by Giotto. Data obtained at large masses show clear evidence of a decrease in the mass distribution index at these masses within the coma; it is shown that such a value of the mass index can furnish sufficient mass for consistency with an observed deceleration.

Mcdonnell, J. A. M.↗

The disks of T Tauri stars with flat infrared spectra

The energy distributions of T Tauri stars with flat infrared spectra is modeled by assuming that they have spatially thin disks with unorthodox radial gradients of temperature. Derived model parameters show that the disks associated with the flat-spectrum sources must contain intrinsic luminosity in addition to the energy intercepted and reprocessed from the central star, i.e., the disks must be active. Self-gravity may provide a possible source for this activity.

Adams, Fred C.↗

An update of the total-strain version of SRP

An updated procedure for characterizing an alloy and predicting cyclic life by using the total strain range version of strainrange partitioning (TS-SRP) has been developed. The principal feature of this update is a new procedure for determining the intercept of time dependent elastic strain range versus cyclic life lines. The procedure is based on an established relation between failure and the cyclic stress-strain response of an alloy. The stress-strain response is characterized by empirical equations presented in this report. These equations were determined with the aid of a cyclic constitutive model. The procedures presented herein reduce the testing required to characterize an alloy. Failure testing is done only in the high strain, low life regime; cyclic stress-strain response is determined from tests conducted in both the high and low strain regimes. These tests are carried out to stability of the stress-strain hysteresis loop but not to failure. Thus both the time and costs required to characterize an alloy are greatly reduced. This approach was evaluated and verified for two nickel base superalloys, AF2-1DA and Inconel 718.

Saltsman, James F.↗

Estimating soil wetness using satellite data

Improved estimates of soil wetness were obtained using observations from both the NIMBUS-7 Scanning Multichannel Microwave Radiometer (SMMR) and the NOAA-7 Advanced Very High Resolution Radiometer (AVHRR). SMMR 66 GHz frequency, horizontal polarization, brightness temperature T(BH) was first correlated with soil wetness, as computed using an Antecedent Precipitation Index (API) model, for a number of SMMR ground resolution areas involving a fairly wide range of vegetation densities. The API generally accounted for more than 70 percent of the observed temporal variability in T(BH), with linear correlations being significant at the 1 percent level. The regression slope of T(BH) versus API correlated well, at the 1 percent level, with a vegetation index derived from AVHRR visible and near-infrared observations. The regression intercept was found to correlate less satisfactorily, but was significant at the 5 percent level. These linear regression results were used to develop a diagnostic model for soil wetness using SMMR and AVHRR data only.

Choudhury, Bhaskar J.↗

Comparing hydrogen and hydrocarbon booster fuels

The present evaluation of the consequences of hydrogen and hydrocarbon fuels as the basis of launch vehicle booster rocket-stage performance notes that hydrocarbon fuels lead to lower vehicle dry mass, for low-velocity requirements, while hydrogen fuel furnishes lower dry mass. Vehicles employing both types of fuel attempt to take advantage of the low intercept and slope of hydrocarbon fuel at low velocity, and subsequently, of the slope of the hydrogen curves at higher velocities.

Martin, James A.↗

Reduction Of Stresses In Growing Silicon Webs

New trenched lid intercepts less radiation from edges of growing silicon ribbon, giving rise to faster growth and temperature distribution resulting in lower residual stress. Cutting trench in susceptor lid allows edges of growing ribbon of silicon to cool more rapidly. Edges cool and solidify nearly same rate as center of ribbon, and thermal stress in ribbon reduced. Because of more-effective edge cooling, wider ribbon grown, and withdrawn at faster rate. Productivity of dendritic-web growth furnace increased.

Duncan, C. S.↗

Optical Measurement Of Sound Pressure

Noninvasive technique does not disturb field it measures. Sound field deflects laser beam proportionally to its amplitude. Knife edge intercepts undeflected beam, allowing only deflected beam to reach photodetector. Apparatus calibrated by comparing output of photodetector with that of microphone. Optical technique valuable where necessary to measure in remote, inaccessible, or hostile environment or to avoid perturbation of measured region.

Trinh, Eugene H.↗

A possible explanation for the inconsistency between the Giotto grain mass distribution and ground-based observations

Giotto measured the in situ Halley dust grain mass distribution with 2 instruments, Particle Impact Analyzer and Dust Impact Detection System (DIDSY), as well as the total intercepted mass from the deceleration of the spacecraft (Giotto Radio-Science Experiment, GRE). Ground based observations made shortly before encounter have fluxes much higher than would be predicted from Giotto data. It is concluded that Giotto DIDSY and GRE data represent observations of dust originating from a narrow track along the nucleus. They are consistent with ground based data, if assumptions are made about the level of activity along this track. The actual size distribution that should be used for modeling of the whole coma should not include the large mass excess actually observed by Giotto. Extrapolation of the small grain data should be used, since for these grains the velocity dispersion is low and temporal changes at the nucleus would not affect the shape of the mass distribution.

Perry, C. H.↗

A planetary ultra hypervelocity impact mechanics and shock wave science facility

Using the concept of intercepting orbits from a pair of Space Station serviced free flyers, a class of impact and shock wave experiments pertinent to planetary science can be performed. One proposed free flying vehicle is an impactor dispensor, and the second is the impact laboratory. How collision is achieved by utilizing essentially twice orbital velocity is demonstrated. The impactor dispensor contains a series of small flyer plates or other projectiles which are launched into the trajectory of the impactor laboratory at appropriate positions. The impactor laboratory is a large impact tank similar to those in terrestrial gun laboratories, except that it contains a supply of targets and instrumentation such as high speed cameras, flash X-ray apparatus, and digital recorders. Shock and isentropic pressures of up to 20 Mbar are achievable with such a system which provides 15 km/sec impact velocities for precisely oriented projectiles.

Ahrens, Thomas J.↗

Investigation of the enhanced spatial density of submicron lunar ejecta between L values 1.2 and 3.0 in the earth's magnetosphere: Theory

Initial results from the measurement conducted by the dust particle experiment on the lunar orbiting satellite Lunar Explorer 35 (LE 35) were reported with the data interpreted as indicating that the moon is a significant source of micrometeroids. Primary sporadic and stream meteoroids impacting the surface of the moon at hypervelocity was proposed as the source of micron and submicron particles that leave the lunar craters with velocities sufficient to escape the moon's gravitational sphere of influence. No enhanced flux of lunar ejecta with masses greater than a nanogram was detected by LE 35 or the Lunar Orbiters. Hypervelocity meteoroid simulation experiments concentrating on ejecta production combined with extensive analyses of the orbital dynamics of micron and submicron lunar ejecta in selenocentric, cislunar, and geocentric space have shown that a pulse of these lunar ejecta, with a time correlation relative to the position of the moon relative to the earth, intercepts the earth's magnetopause surface (EMPs). As shown, a strong reason exists for expecting a significant enhancement of submicron dust particles in the region of the magnetosphere between L values of 1.2 and 3.0. This is the basis for the proposal of a series of experiments to investigate the enhancement or even trapping of submicron lunar ejecta in this region. The subsequent interaction of this mass with the upper-lower atmosphere of the earth and possible geophysical effects can then be studied.

Alexander, W. M.↗

Guidance for an aeroassisted orbital transfer vehicle

The use of atmospheric drag for slowing satellite in high energy, high apogee orbits to a lower energy, lower apogee orbit about the Earth is investigated. The high energy orbit is assumed to intercept the Earth's atmosphere. Guidance for the atmospheric phase of the trajectory may be done using the aerodynamic forces generated by the passage through the atmosphere. This research was concerned with the investigation of several methods of guidance during the atmospheric phase to cause a significant reduction in the final velocity as the vehicle leaves the atmosphere. In addition, the velocity direction was controlled to exit to a desired target orbit. Lastly excess aerodynamic lift was used to effect a plane change between the entry orbit plane and the exit orbit plane to achieve a desired orbit plane. The guidance methods were applied to a 3 degree-of-freedom simulation which included an oblate Earth gravity model and a rotating atmosphere. Simulation results were compared on the basis of speed of computation of the guidance parameters and amount of added velocity necessary to achieve the desired orbit.

Hall, Kenneth R.↗

Comparison of the degradation effects of heavy ion, electron, and cobalt-60 irradiation in an advanced bipolar process

Experimental measurements are reported of the degradation effects of high-energy particles (heavy Br ions and electrons) and Co-60 gamma-rays on the current gain of minimum-geometry bipolar transistors made from an advanced process. The data clearly illustrate the total-ionizing-dose vs particle-fluence behavior of this bipolar transistor produced by an advanced process. In particular, bulk damage from Co-60 gamma rays in bipolar transistors (base transport factor degradation) and surface damage in bipolar transistors from ionizing radiation (emitter-efficiency degradation) have been observed. The true equivalence between various types of radiation for this process technology has been determined on the basis of damage from the log K1 intercepts.

Zoutendyk, John A.↗

Progress in utilization of a mobile laboratory for making storm electricity measurements

A mobile atmospheric science laboratory has been used to intercept and track storms on the Great Plains region of the U.S., with the intention of combining the data obtained with those from Doppler and conventional radars, NASA U-2 aircraft overflights, balloon soundings, and fixed-base storm electricity measurements. The mobile lab has proven to be valuable in the gathering of ground truth verifications for the two commercially operated lightning ground-strike locating systems. Data acquisition has recently been expanded by means of mobile ballooning before and during storms.

Rust, W. David↗

Improved ground hydrology calculations for global climate models (GCMs) - Soil water movement and evapotranspiration

A physically based ground hydrology model is presented that includes the processes of transpiration, evaporation from intercepted precipitation and dew, evaporation from bare soil, infiltration, soil water flow, and runoff. Data from the Goddard Institute for Space Studies GCM were used as inputs for off-line tests of the model in four 8 x 10 deg regions, including Brazil, Sahel, Sahara, and India. Soil and vegetation input parameters were caculated as area-weighted means over the 8 x 10 deg gridbox; the resulting hydrological quantities were compared to ground hydrology model calculations performed on the 1 x 1 deg cells which comprise the 8 x 10 deg gridbox. Results show that the compositing procedure worked well except in the Sahel, where low soil water levels and a heterogeneous land surface produce high variability in hydrological quantities; for that region, a resolution better than 8 x 10 deg is needed.

Abramopoulos, F.↗

Late evolution of very low mass X-ray binaries sustained by radiation from their primaries

The accretion-powered radiation from the X-ray pulsar system Her X-1 (McCray et al. 1982) is studied. The changes in the soft X-ray and gamma-ray flux and in the accompanying electron-positron wind are discussed. These are believed to be associated with the inward movement of the inner edge of the accretion disk corresponding to the boundary with the neutron star's corotating magnetosphere (Alfven radius). LMXB evolution which is self-sustained by secondary winds intercepting the radiation emitted near an LMXB neutron star is investigated as well.

Ruderman, M.↗

Calibrating the simple biosphere model for Amazonian tropical forest using field and remote sensing data. I - Average calibration with field data

Using meteorological and hydrological measurements taken in and above the central-Amazon-basin tropical forest, calibration of the Sellers et al. (1986) simple biosphere (SiB) model are described. The SiB model is a one-dimensional soil-vegetation-atmosphere model designed for use within GCMs models, representing the vegetation cover by analogy with processes operating within a single representative plant. The experimental systems and the procedures used to obtain field data are described, together with the specification of the physiological parameterization required to provide an average description of data. It was found that some of the existing literature on stomatal behavior for tropical species is inconsistent with the observed behavior of the complete canopy in Amazonia, and that the rainfall interception store of the canopy is considerably smaller than originally specified in the SiB model.

Sellers, Piers J.↗

Viewing Welds By Computer Tomography

Computer tomography system used to inspect welds for root penetration. Source illuminates rotating welded part with fan-shaped beam of x rays or gamma rays. Detectors in circular array on opposite side of part intercept beam and convert it into electrical signals. Computer processes signals into image of cross section of weld. Image displayed on video monitor. System offers only nondestructive way to check penetration from outside when inner surfaces inaccessible.

Pascua, Antonio G.↗

New energy conversion techniques in space, applicable to propulsion

The powering of aircraft with laser energy from a solar power satellite may be a promising new approach to the critical problem of the rising cost of fuel for aircraft transportation systems. The result is a nearly fuelless, pollution-free flight transportation system which is cost-competitive with the fuel-conservative airplane of the future. The major components of this flight system include a laser power satellite, relay satellites, laser-powered turbofans and a conventional airframe. The relay satellites are orbiting optical systems which intercept the beam from a power satellite and refocus and redirect the beam to its next target.

Hertzberg, A.↗