Search NASA⌕ Search

SEARCH · Search NASA

Results for “LEADING ABSTRACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

In situ investigation of halide incorporation into perovskite solar cells

We report on the material chemistry following crystallization in the presence of water vapor of chlorinated formamidinium lead-triiodide (NH 2 CH = NH 2 PbI 3-x Cl x ) perovskite films. We found in-situ exposure to water vapor reduces, or possibly eliminates, the retention of chlorine (Cl) inside NH 2 CH = NH 2 PbI 3-x Cl x crystals. There is a strong tendency toward Cl volatility, which indicates the sensitivity of these materials for their integration into solar cells. The requisite for additional efforts focused on the mitigation of water vapor is reported. Based on the in situ results, hot casting (<100°C) in dry conditions demonstrates improved film coverage and Cl retention with efficiencies reaching 12.07%.

14 SOLAR ENERGY↗
DOE OSTI2018

EBSD analysis of surface and bulk microstructure evolution during interrupted tensile testing of a Fe-19Cr-12Ni alloy

Highlights: • Similar deformation structures are obtained for surface and bulk grains. • A lower strain is needed for twinning in surface grains than in bulk grains. • A reduced ability to cross-slip due to low SFE leads to an increasing LAB density. • Twinning reduces the dislocation slip length. • High strain-hardening rate is maintained up to high strains. - Abstract: The microstructure evolution in both surface and bulk grains in a pure Fe-19Cr-12Ni alloy has been analyzed using electron backscatter diffraction after tensile testing interrupted at different strains. Surface grains were studied during in situ tensile testing performed in a scanning electron microscope, whereas bulk grains were studied after conventional tensile testing. The evolution of the deformation structure in surface and bulk grains displays a strong resemblance but the strain needed to obtain a similar deformation structure is lower in the case of surface grains. Both slip and twinning are observed to be important deformation mechanisms, whereas deformation-induced martensite formation is of minor importance. Since the stacking fault energy (SFE) is low, ~17 mJ/m{sup 2}, dynamic recovery by cross slip of un-dissociated dislocations is unfavorable. This reduces the annihilation of dislocations which in turn leads to a significant increase of low angle boundaries with increasing strain. The low SFE also favors formation of deformation twins which reduces the slip distance, leading to a hardening similar to the Hall-Petch relation. The combination of a low ability for cross-slip and a reduced slip distance caused by twinning is concluded to be the main reason for maintaining a high strain-hardening rate up to strains close to necking.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Effect of natural fractures on determining closure pressure

Abstract In Utah FORGE reservoir, eight pressure transient tests (microhydraulic fracturing and DFIT™) show natural fracture/pressure-dependent leakoff. This behavior may lead to misinterpretation of the closure pressure (proxy for minimum principal stress). The closure pressures obtained from DFIT™ (or microhydraulic fracturing) testing may reflect shear failure along natural fractures or discontinuities rather than tensile failure and lead to inaccurate estimates of the minimum principal stress. In pressure tests conducted at the Utah FORGE site showed that reactivation or opening of natural fractures intersecting the wellbore and were suggested by multiple closure events in DFIT™ tests. In addition, comparisons between the pre- and post-well-tests FMI logs show that there are populations of induced fracture and reactivated natural fractures which are mostly vertical and sub-vertical. In this study, DFIT™ (or microhydraulic fracturing) test analysis and numerical simulations were used to suggest that hydraulic shearing of critically stressed natural fractures can contribute to multiple closure signatures and possibly lead to incorrect determination of the minimum principal stress. As other authors have previously advocated, the DFIT™ test analyses and numerical simulations suggest that better estimations of minimum principal stress may be derived by injecting at relatively high rate and pressure and insuring that tensile breakdown is reached. In addition, extended shut-in period is required to determine accurate reservoir characteristics and fluid flow regime.

Nadimi, S.↗
DOE OSTI2015

Structure and magnetism of Sr{sub 3}NiSb{sub 2}O{sub 9}

The crystal structure of the perovskite-related oxide Sr{sub 3}NiSb{sub 2}O{sub 9} has been refined from X-ray and neutron powder diffraction data; space group P2{sub 1}/n, a=5.64381(2), b=5.62299(2), c=7.95687(3) Å, β=90.014(2)°. The structure has two crystallographically-distinct six-coordinate cation sites with occupancies Sb 0.97(1), Ni 0.03 and Sb 0.36, Ni 0.64. The magnetic susceptibility has been measured over the temperature range 2≤T/K≤300. Fitting data recorded in the temperature range 150<T/K<300 to the Curie–Weiss law resulted in µ{sub eff}=3.49(1) µ{sub B} per Ni{sup 2+}, θ=−138(1) K. Ferrimagnetic coupling in the vicinity of the antisite defects is suggested to be responsible for the enhanced susceptibility observed below ~90 K. The zero-field cooled susceptibility shows a maximum at 8.7 K that is not observed in the field-cooled susceptibility. Hysteresis is observed in M(H) at 2 K but not at 7.5 K. - Graphical abstract: Antisite defects on the B sites of perovskite-related Sr{sub 3}NiSb{sub 2}O{sub 9} lead to complex magnetic behaviour. - Highlights: • Sr{sub 3}NiSb{sub 2}O{sub 9} is a monoclinic perovskite. • The magnetic behaviour of Sr{sub 3}NiSb{sub 2}O{sub 9} at around 90 K can be attributed to antisite defects. • The magnetic behaviour of Sr{sub 3}NiSb{sub 2}O{sub 9} can be related to that of the relaxor ferromagnet La{sub 3}Ni{sub 2}SbO{sub 9}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Meso-scale microstructural agglomerate quantification in boron carbide using X-ray microcomputed tomography

Highlights: • First known quantification of agglomerate defect distributions comprising of carbonaceous and aluminum nitride phases B{sub 4}C. • In-depth statistical analyses of the size, orientation, and morphology of the defects. • The determination of directional dependence of the hot-pressing direction on the agglomerate distributions. - Abstract: Failure in brittle materials is governed, in part, by the specific microstructure of that material, with heterogeneous microstructures generally leading to reduced mechanical properties and performance. In ceramics used for armor, an increase in compressive strength can be an indicator of improved ballistic performance. In hot-pressed boron carbide (B{sub 4}C) ceramic plates, failure has been attributed to carbonaceous flakes observed on the fracture surfaces of failed specimens. However, this current work shows agglomerates, in addition to the carbonaceous flakes, are present in this boron carbide. The density and distribution of these agglomerates are believed to influence the ballistic performance. Therefore, it is of interest to improve the quantification of meso-scale microstructural agglomerates so that strategies can be developed to mitigate them. This work is focused on the microstructural characterization of dumbbell-shaped compression specimens that were machined from a single tile of pressure-aided densification (PAD) B{sub 4}C, using high-resolution micro-computed tomography (microCT). Large clusters of non-B{sub 4}C agglomerates, up to 125 μm in diameter, were observed in addition to the typical smaller carbonaceous flakes and aluminum-based phases. Agglomerate size distribution, orientation, morphology, and spacing were quantified both parallel and perpendicular to the pressing direction. This defect quantification provides valuable information for a better understanding of the material microstructure which is a critical step in improving armor materials for the future.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Crystal development during carbonation of lime-based mortars in different environmental conditions

Highlights: • High CO{sub 2} and DiloCarb® treatment favour advanced carbonation and self-healing. • In the lime mortar without ceramics, channel type pores occur in the aggregate border. • In the lime mortars with ceramics, vug type pores are produced in the binder during kneading. • The formation of tabular CaCO{sub 3} polymorphs caused an increase in stress leading to microshrinkage cracks. • The use of a ceramic provoked dissolution and then re-precipitation of more stable polymorphs. - Abstract: This study examines crystal development during the carbonation of lime mortars according to the additives used and curing conditions. Two types of samples were prepared, one with sand and the other one additionally including Roman ceramics. These mortars were cured: 1) by spraying with a carbonation accelerator product under laboratory conditions; 2) in a climate chamber under 20 °C, 60% relative humidity, and 1600 ppm CO{sub 2}; and 3) under laboratory conditions as controls. Polarized light microscopy, SEM-EDS and XRD were used at 28, 90, 120 and 180 days to monitor the carbonation process. Observations indicate the development of different CaCO{sub 3} polymorphs, which appeared as metastable phases. The early nucleation of a well-defined calcite phase as the most stable CaCO{sub 3} polymorph was only identified in the chamber-cured samples. Differences in the pore network were observed depending on the composition and morphology of the mortar components and the environmental curing conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2016

High-temperature electrochemical performance of low-cost La–Ni–Fe based hydrogen storage alloys with different preparation methods

Highlights: • Effects of four different preparation processes were studied at 20/60 °C. • All NS + HT, RS and RS + HT processes can optimize the thermodynamic performance. • The HT process can provoke the precipitation of A{sub 2}B{sub 7} and leads to a poor cycling life. • Al exhibits the most remarkable dissolution for all the alloys, especially at 60 °C. - Abstract: In order to optimize the microstructure and high temperature electrochemical performances of low-cost AB{sub 5}-type Ml(NiMnAl){sub 4.2}Co{sub 0.3}Fe{sub 0.5} hydrogen storage electrode alloys, four different preparation methods including normal solidification (NS), normal solidification and 900 °C heat treatment (NS + HT), rapid solidification (RS), rapid solidification and 900 °C heat treatment (RS + HT) were adopted in this work. All alloys exhibit CaCu{sub 5} type hexagonal structure and there is a small amount of A{sub 2}B{sub 7} phase in NS + HT and RS + HT alloys. It is found the using of HT process can decrease the hydrogen equilibrium plateau pressure, the plateau slope and hysteresis at 40, 60 and 80 °C. The NS + HT and RS + HT alloys also possess better activation, high rate discharge performance, larger discharge capacity, but poor cycling performance due to the existence of A{sub 2}B{sub 7} phase which can accelerate dissolution of Ni, Mn and Fe elements in KOH alkaline electrolyte. The RS process can make alloy exhibit the best cycling performance especially at 60 °C.

36 MATERIALS SCIENCE↗
DOE OSTI2016

O 2 Activation by Non-Heme Iron Enzymes

The non-heme Fe enzymes are ubiquitous in nature and perform a wide range of functions involving O 2 activation. These had been difficult to study relative to heme enzymes; however, spectroscopic methods have now been developed that provide significant insight into the correlation of structure with function. This Current Topics article summarizes both the molecular mechanism these enzymes use to control O 2 activation in the presence of cosubstrates and the oxygen intermediates these reactions generate. Three types of O 2 activation are observed. First, non-heme reactivity is shown to be different from heme chemistry where a low-spin Fe III -OOH non-heme intermediate directly reacts with substrate. Also, two subclasses of non-heme Fe enzymes generate high-spin Fe IV =O intermediates that provide both σ and π frontier molecular orbitals that can control selectivity. Lastly, for several subclasses of non-heme Fe enzymes, substrate binding to the Fe II site leads to the one electron reductive activation of O 2 to an Fe III -superoxide capable of H-atom abstraction and electrophilic attack.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Overcoming Carrier Concentration Limits in Polycrystalline CdTe Thin Films with In Situ Doping

Abstract Thin film materials for photovoltaics such as cadmium telluride (CdTe), copper-indium diselenide-based chalcopyrites (CIGS), and lead iodide-based perovskites offer the potential of lower solar module capital costs and improved performance to microcrystalline silicon. However, for decades understanding and controlling hole and electron concentration in these polycrystalline films has been extremely challenging and limiting. Ionic bonding between constituent atoms often leads to tenacious intrinsic compensating defect chemistries that are difficult to control. Device modeling indicates that increasing CdTe hole density while retaining carrier lifetimes of several nanoseconds can increase solar cell efficiency to 25%. This paper describes in-situ Sb, As, and P doping and post-growth annealing that increases hole density from historic 10 14 limits to 10 16 –10 17 cm −3 levels without compromising lifetime in thin polycrystalline CdTe films, which opens paths to advance solar performance and achieve costs below conventional electricity sources.

14 SOLAR ENERGY↗
DOE OSTI2024

BBN catalysis by doubly charged particles

Abstract We consider primordial nucleosynthesis in the presence of hypotheticalquasi-stable doubly charged particles. Existence ofX –– withmacroscopic lifetimes will lead to the formation of its bound states with 4 He and otherlight elements, significantly facilitating the subsequentformation of lithium nuclei. From observational constraints on maximumallowable amount of lithium, that we update in this work, we derivestrong constraints on the abundance and lifetime ofX –– . In alikely cosmological freeze-out scenario with temperatures initiallyexceeding the mass ofX –– , the BBN constrains the lifetime of theseparticles to be less than about 100 seconds. For parametrically longlifetimes, lithium abundance data constrainX –– abundance to be lessthan 10 -9 relative to protons, regardless of whether these particlesdecay or remain stable. Stable particles could saturate the dark matterdensity only if their mass is comparable to or in excess of10 10 GeV, and most ofX –– will be found in bound states withberyllium nuclei, so that chemically they would appear as abnormallyheavy helium isotopes.

Astronomy & Astrophysics↗
DOE OSTI2020

Decarbonizing US passenger vehicle transport under electrification and automation uncertainty has a travel budget

Abstract The transportation sector is at the beginning of a transition represented by electrification, shared mobility, and automation, which could lead to either increases or decreases in total travel and energy use. Understanding the factors enabling deep decarbonization of the passenger vehicle sector is essential for planning the required infrastructure investments and technology adoption policies. We examine the requirements for meeting carbon reduction targets of 80% and higher for passenger vehicle transport in the United States (US) by midcentury under uncertainty. We model the changes needed in vehicle electrification, electricity carbon intensity, and travel demand. Since growth in fleet penetration of electric vehicles (EVs) is constrained by fleet stock turnover, we estimate the EV penetration rates needed to meet climate targets. We find for a base case level of passenger vehicle travel, midcentury deep decarbonization of US passenger transport is conditional on reducing the electricity generation carbon intensity to close to zero along with electrification of about 67% or 84% of vehicle travel to meet decarbonization targets of 80% or 90%, respectively. Higher electricity generation carbon intensity and degraded EV fuel economy due to automation would require higher levels of fleet electrification and/or further constrain the total vehicle travel allowable. Transportation deep decarbonization not only depends on electricity decarbonization, but also has a total travel budget, representing a maximum total vehicle travel threshold that still enables meeting a midcentury climate target. This makes encouraging ride sharing, reducing total vehicle travel, and increasing fuel economy in both human-driven and future automated vehicles increasingly important to deep decarbonization.

Alarfaj, Abdullah F. (ORCID:0000000157360662)↗
DOE OSTI2021

Successive common envelope events from multiple planets

ABSTRACT Many stars harbour multiplanet systems. As these stars expand late in their evolutions, the innermost planet may be engulfed, leading to a common envelope (CE) event. Even if this is insufficient to eject the envelope, it may expand the star further, causing additional CE events, with the last one unbinding what remains of the envelope. This multiplanet CE scenario may have broad implications for stellar and planetary evolution across a range of systems. We develop a simplified version and show that it may be able to explain the recently observed planet WD 1856 b.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

Winter hardiness of Miscanthus (III): Genome‐wide association and genomic prediction for overwintering ability in Miscanthus sinensis

Abstract Overwintering ability is an important selection criterion for Miscanthus breeding in temperate regions. Insufficient overwintering ability of the currently leading Miscanthus biomass cultivar, M . × giganteus (M×g) ‘1993–1780', in regions where average annual minimum temperatures are −26.1°C (USDA hardiness zone 5) or lower poses a pressing need to develop new cultivars with superior cold tolerance. To facilitate breeding of Miscanthus , this study characterized phenotypic and genetic variation of overwintering ability in an M. sinensis germplasm panel consisting of 564 accessions, evaluated in field trials at three locations in North America and two in Asia. Genome‐wide association (GWA) and genomic prediction analyses were performed. The Korea/N China M. sinensis genetic group is a valuable gene pool for cold tolerance. The Yangtze‐Qinling, Southern Japan, and Northern Japan genetic groups were also potential sources of cold tolerance. A total of 73 marker–trait associations were detected for overwintering ability. Estimated breeding value for overwintering ability based on these 73 markers could explain 55% of the variation for first winter overwintering ability among M. sinensis . Average genomic prediction ability for overwintering ability across 50 fivefold cross‐validations was high (~0.73) after accounting for population structure. Common genomic regions for overwintering ability were detected by GWA analyses and a previous parallel QTL mapping study using three interconnected biparental F 1 populations. One QTL on Miscanthus LG 8 encompassed five GWA hits and a known cold‐responsive gene, COR47 . The other overwintering ability QTL on Miscanthus LG 11 contained two GWA hits and three known cold stress‐related genes, carboxylesterase 13 ( CEX13 ), WRKY2 transcription factor, and cold shock domain ( CSDP1 ). Miscanthus accessions collected from high latitude locations with cold winters had higher rates of overwintering, and more alleles for overwintering, than accessions collected from southern locations with mild winters.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Antiferromagnetic-configuration–dependent high harmonic generation in bilayer CrI 3

Abstract Bilayer CrI 3 accommodates both interlayer antiferromagnetic (AFM) and intralayer ferromagnetic couplings. Different alignments of intralayer ferromagnetic orders would lead to almost degenerate AFM configurations, which are insensitive to conventional techniques such as VSM and magneto-optical Kerr effect. Here, we demonstrate high harmonic generation (HHG) as a feasible means to detect the AFM configurations in bilayer CrI 3 with AB and stacking orders. When the intralayer magnetic moments are aligned along the z -axis, the AB stacked bilayer CrI 3 cancels the 3 n -order harmonics under the circularly polarized laser field. However, the stacked bilayer contains both even and odd harmonic. The 3 n -order harmonics are recovered as the intralayer magnetic moments of AB bilayer are in-plane aligned. For an in-plane linearly polarized laser field, the stacking bilayer with the magnetic moments along the x -axis contains both the even and odd harmonics in each component. However, when the magnetic moments are along the y -axis, the perpendicular component of HHG cancels out for the linearly polarized laser field along the x -axis. More interestingly, when the linearly polarized laser field is along the y -axis, the parallel component includes only the odd harmonics while the perpendicular component contains only the even harmonics. Our study provides HHG as a potential tool to detect AFM configurations.

Physics↗
DOE OSTI2017

DYNAMIC DEUTERIUM ENRICHMENT IN COMETARY WATER VIA ELEY–RIDEAL REACTIONS

The deuterium-to-hydrogen ratio (D/H) in water found in the coma of Jupiter family comet (JFC) 67P/Churyumov–Gerasimenko was reported to be (5.3 ± 0.7) × 10{sup −4}, the highest among comets and three times the value for other JFCs with an ocean-like ratio. This discrepancy suggests the diverse origins of JFCs and clouds the issue of the origin of Earth’s oceanic water. Here we demonstrate that Eley–Rideal reactions between accelerated water ions and deuterated cometary surface analogs can lead to instantaneous deuterium enrichment in water scattered from the surface. The reaction proceeds with H{sub 2}O{sup +} abstracting adsorbed D atoms, forming an excited H{sub 2}DO* state, which dissociates subsequently to produce energetic HDO. Hydronium ions are also produced readily by the abstraction of H atoms, consistent with H{sub 3}O{sup +} detection and abundance in various comets. Experiments with water isotopologs and kinematic analysis on deuterated platinum surfaces confirmed the dynamic abstraction mechanism. The instantaneous fractionation process is independent of the surface temperature and may operate on the surface of cometary nuclei or dust grains, composed of deuterium-rich silicates and carbonaceous chondrites. The requisite energetic water ions have been detected in the coma of 67P in two populations. This dynamic fractionation process may temporarily increase the water D/H ratio, especially as the comet gets closer to the Sun. The magnitude of the effect depends on the water ion energy-flux and the deuterium content of the exposed cometary surfaces.

79 ASTRONOMY AND ASTROPHYSICS↗