Search NASA⌕ Search

SEARCH · Search NASA

Results for “Laboratory evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Hydromechanical impact of basement rock on injection-induced seismicity in Illinois Basin

Abstract The common explanation of observed injection-induced microseismicity is based on the measured stress state at the injection interval and the assumption that it remains the same in the vicinity. We argue here that representing the stress state in different geologic formations over the injection site with the single Mohr’s circle is insufficient due to local stratigraphic features and contrast in compressibilities of the involved formations. The role of hydromechanical coupling in the microseismic response is also crucial for the proper assessment of the problem. Thoroughly monitored Illinois Basin Decatur Project revealed the majority of CO 2 injection-associated microseismic events being originated in the crystalline basement. Even though basement faults can serve as the conduits for fluid flow—the predicted pressure increase seems to be insufficient to trigger seismicity. To address this issue, accurate laboratory measurements of rock properties from the involved formations are conducted. The pre-injection stress state and its evolution are evaluated with the hydromechanically coupled numerical model. It appears that the presence of an offset in a stiff competent layer affects the stress state in its vicinity. Therefore, both the pre-injection stress state and its evolution during the fluid injection should be addressed during the induced seismicity assessment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

CROCUS Sodar Measurements of Lower Atmospheric Wind Profiles at Argonne Testbed for Multiscale Observational Science (ATMOS) Site

The Scintec MFAS Sodar (Multiple-Frequency Acoustic Sounder) is an autonomous, ground-based acoustic remote sensing system designed to measure vertical profiles of horizontal wind speed, wind direction, and vertical velocity in the lower atmosphere. The instrument transmits sequences of acoustic pulses and detects the Doppler-shifted sound waves backscattered by small-scale temperature and velocity fluctuations caused by atmospheric turbulence. From these Doppler shifts, the system derives three-dimensional wind vectors by combining radial velocities from multiple beam orientations.The MFAS Sodar operates with a first usable range gate beginning at approximately 30 m above ground level and a configurable vertical resolution of 10 m. Under favorable acoustic conditions, the system provides wind profiles extending up to 600 m above ground level. Measurements are processed into 15-minute averaged profiles containing wind speed, direction, vertical velocity, and diagnostic quantities such as signal-to-noise ratio and echo strength.This dataset was collected at the Argonne Testbed for Multiscale Observational Science (ATMOS) facility in Lemont, Illinois, as part of DOE's CROCUS Urban Integrated Field Laboratory (UIFL) initiative. The purpose of these observations is to characterize the vertical wind structure and boundary-layer evolution across the urban–suburban gradient of the greater Chicago region. In particular, these data are intended to improve understanding of how local meteorology, such as lake-breeze penetration, nocturnal jets, and daytime mixing, varies between the densely built urban core and the suburban periphery. The MFAS observations provide critical context for evaluating high-resolution model simulations and for integrating with complementary lidar, radar, and in-situ meteorological measurements within the broader CROCUS UIFL network.All data are archived in NetCDF (Network Common Data Form) format and include wind and diagnostic parameters. The files can be accessed and analyzed using standard software that supports NetCDF, such as Python (e.g., xarray, netCDF4), MATLAB, R (e.g., ncdf4, raster), or Panoply (NASA’s NetCDF visualization application).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

A theoretical/computational framework to measure SiO2 and MgO viscosity at high pressure

The convection of the mantle of Earth and super-Earths is important for many terrestrial phenomena, from plate tectonics to outgassing. Rheological properties, such as viscosity, regulate the transport of thermal energy and mass. However, the viscosity of mantle-relevant materials, such as MgO, at relevant pressures (>120 GPa) are not well constrained. The objective of this work was to develop a computational platform to simulate novel experiments aiming to measure the viscosity of MgO at high pressures. Experiments performed by our collaborators at Johns Hopkins University and Lawrence Livermore National Laboratory use the OMEGA EP laser facility to shock a corrugated MgO interface to 170 GPa, with resulting velocity evolution governed by the viscous Richtmyer-Meshkov instability. We used an in-house hydrocode to simulate this process and thus provide a bound on viscosity by comparing our simulations results to these experiments, as well as to examine the physical processes at play. We simulated the experiments with different values of MgO viscosity (from inviscid to 10,000 Pa∙s) while taking into account the unsteady laser pulse, the material's equation of state, and the rate-dependent constitutive relation for MgO, and the materials' equations of state. Our results suggest that MgO at these conditions has a viscosity within an order of magnitude of 5000 Pa∙s.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

The Factory and the Beehive. IV. A Comprehensive Study of the Rotation X-Ray Activity Relation in Praesepe and the Hyades

X-ray observations of low-mass stars in open clusters are critical to understanding the dependence of magnetic activity on stellar properties and their evolution. Praesepe and the Hyades, two of the nearest, most-studied open clusters, are among the best available laboratories for examining the dependence of magnetic activity on rotation for stars with masses ≲1 M ⊙ . We present an updated study of the rotation–X-ray activity relation in the two clusters. We updated membership catalogs that combine pre-Gaia catalogs with new catalogs based on Gaia Data Release 2. The resulting catalogs are the most inclusive ones for both clusters: 1739 Praesepe and 1315 Hyades stars. We collected X-ray detections for cluster members, for which we analyzed, re-analyzed, or collated data from ROSAT, the Chandra X-ray Observatory, the Neil Gehrels Swift Observatory, and XMM-Newton. We have detections for 326 Praesepe and 462 Hyades members, of which 273 and 164, respectively, have rotation periods—an increase of 6× relative to what was previously available. We find that at ≈700 Myr, only M dwarfs remain saturated in X-rays, with only tentative evidence for supersaturation. We also find a tight relation between the Rossby number and fractional X-ray luminosity L X /L bol in unsaturated single members, suggesting a power-law index between –3.2 and –3.9. Lastly, we find no difference in the coronal parameters between binary and single members. These results provide essential insight into the relative efficiency of magnetic heating of the stars' atmospheres, thereby informing the development of robust age-rotation-activity relations.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1973

Numerical simulation of small-scale thermal convection in the atmosphere

A Boussinesq system is integrated numerically in three dimensions and time in a study of nonhydrostatic convection in the atmosphere. Simulation of cloud convection is achieved by the inclusion of parametrized effects of latent heat and small-scale turbulence. The results are compared with the cell structure observed in Rayleigh-Benard laboratory conversion experiments in air. At a Rayleigh number of 4000, the numerical model adequately simulates the experimentally observed evolution, including some prominent transients of a flow from a randomly perturbed initial conductive state into the final state of steady large-amplitude two-dimensional rolls. At Rayleigh number 9000, the model reproduces the experimentally observed unsteady equilibrium of vertically coherent oscillatory waves superimposed on rolls.

Somerville, R. C. J.↗
NASA NTRS2015

Organics in Space: Results from Space Exposure Platforms and Nanosatellites

A series of successful laboratory astrophysics experiments performed on International Space Station(ISS) external platforms such as EXPOSE have provided insights into the evolution of organic and biological materials in space and planetary environments. The study of the reactions, destruction, and longevity of organics in the space environment is of fundamental interest. To provide an accurate outer space environment for extended durations, exposure experiments in low Earth orbit have been conducted in the last decades in order to examine the consequences of actual space conditions including combinations of solar and cosmic radiation, space vacuum, and microgravity. The OOREOS (OrganismORganic Exposure to Orbital Stresses) nanosatellite studied in situ during the 6-month primary and 1-year extended mission the photochemical processing of selected PAHs in low Earth orbit (650 km altitude); results were autonomously telemetered to Earth. We report on the methods and flight preparation of samples for space exposure platforms and results on the stability of organic thin-films. The UV-vis degradation process of thin-films was recorded over time, which revealed intriguing and counter-intuitive photolytic kinetics that will be re-investigated on the ISS in a space environment.

Space weathering↗
DOE OSTI2018

In situ measurements of reactions in a glass-forming batch by X-ray and neutron diffraction

We report the batch materials used in glass production are often too coarse to allow phase evolution measurements by in situ high-temperature x-ray diffraction (HTXRD). Reducing the particle sizes to accommodate these measurements changes the reaction kinetics and can alter the reaction pathway. Unlike conventional laboratory XRD, which operates in reflection mode and analyzes the surface region of finely ground powder, neutron diffraction can be used to characterize as-received batch materials by means of an intense beam which penetrates through a bulk sample. In this study, the phase evolution in a glass-forming batch made with fine batch materials was probed in situ by both HTXRD and time-of-flight neutron diffraction to determine the similarities and differences between measurements by the two techniques. Therefore, the same composition, prepared using the coarser, as-received size distributions of the same batch materials, was studied by both techniques, demonstrating the unique capability of neutron diffraction to analyze material which is too coarse for the HTXRD, and to reveal the effect of the particle size distribution on the reaction kinetics.

36 MATERIALS SCIENCE↗
NASA NTRS1992

Evolution of the Space Station Freedom module pattern

A reanalysis of the evolution configuration module pattern for Space Station Freedom is presented. The module pattern is to consist of one habitation module, one airlock, one cupola, two Space Shuttle Orbiter pressurized docking adapters, one assured crew return vehicle, and one pressurized logistics module. Three laboratory modules are also included. A phased plan has been developed on the basis of utilization analysis being performed and derived through actual and projected user mission requirements for the growth of pressurized elements. The evolution requirement impacts to the module pattern are outlined. Application of the growth philosophy and the physical limitations resulted in a number of core element ground rules for module pattern growth. Nodes and modules are to be grown symmetrically in order to optimize poor flight control characteristics and maximize the capability for crew dual egress between elements. Core module pattern elements are not to be grown along Y-Y axis from nodes 1 or 2 due to physical clearance problems with the thermal control system radiators operational envelope.

Gould, Marston↗
NASA NTRS1978

Screening materials for smoke evolution

The density of smoke produced by burning or smoldering materials is a factor that affects the ability of occupants to escape from a burning structure and the effectiveness of firefighters. Accordingly, considerable effort is being spent on developing materials that minimize the amount of smoke without impairing their performance characteristics. In the present paper, laboratory tests on such materials are described and evaluated. It is seen that the National Bureau of Standards smoke test and the Ohio State University release-rate test are the most promising for screening materials for smoke evolution. It is shown that, for plastics, smoke obscuration is a more realistic concern than smoke toxicity.

Hilado, C. J.↗
NASA NTRSDate not supplied

The Aguas Zarcas Breccia - Similarities to Surface Features of C-Complex Asteroids Ryugu and Bennu

Knowledge of the materials originally present in the proto-solar nebula is one of the most significant constraints for models concerning the formation of our solar system. The physicochemical properties of these original materials can be determined through two distinct and complementary approaches: astronomical observations of nascent stellar systems and the dense clouds from which they originated; and laboratory studies of available astromaterials such as meteorites, interplanetary dust particles, comets, as well as returned mission samples (e.g., from Hayabusa -1 -2;OSIRIS -Rex). Laboratory study of these extraterrestrial materials provides valuable information about the first solids portion of the early solar system and their evolution. Here, we present petrographic and mineralogical characteristics of the polymic beccias Aguas Zarcas based on the research results of [1].On April 23, 2019, at 21:07 local time, a meteorite fall occurred in Aguas Zarcas, San Carlos County, Alajuela province, Costa Rica. The rapid recovery of this brecciated carbonaceous chondrite after its fall provides an opportunity to study a freshly fallen, relatively uncontaminated, and highly brecciated meteorite to compare with samples returned by theHayabusa2 and OSIRIS-REx spacecraft from C-group asteroids. The study includes several pre-rain fragments [1].The X-ray Computed Tomography (XCT) results show many different lithologies. We describe the petrography and mineralogy of five different lithologies of the Aguas Zarcas meteorite. We also present data on bulk oxygen isotopes. We describe all fragments in detail and attempt to classify each lithology in order to understand the origin and formation history of the Aguas Zarcas parent body. Our results show that some lithologies of Aguas Zarcas are similar to those in CM chondrites, but others are unique. The different lithologies [1] also represent different degrees of hydration and heating, which are good analogues for the types of materials returned by the Bennu and Ryugu asteroids. Spectroscopic observations of the Ryugu and Bennu asteroids compared to laboratory measurements of meteorites suggest that the asteroids have some similarities to heated CM, heated CI, or CI chondrites[2-5]. Both asteroids are thought to be composed of materials altered by aqueous alteration (e.g., [5]) and formed by reaccretion after destruction by impacts and brecciation (e.g., [6-7]). Considering the different lithologies in Aguas Zarcas [2] and other CM chondrites [8-9], these types of carbonaceous chondrites can be considered good analogues for samples from the Ryugu and Bennu asteroids. The presence of unique and rare lithologies in the Aguas Zarcas, different from the typical CM chondrite lithologies, suggests complex mixing of different materials in a highly dynamic environment.

Imene Kerraouch↗
NASA NTRS1989

The evolution of ecological tolerance in prokaryotes

The ecological ranges of Archaeobacteria and Eubacteria are constrained by a requirement for liquid water and the physico-chemical stability limits of biomolecules, but within this broad envelope, prokaryotes have evolved adaptations that permit them to tolerate a remarkable spectrum of habitats. Laboratory experiments indicate that prokaryotes can adapt rapidly to novel environmental conditions, yet geological studies suggest early diversification and long-term stasis within the prokaryotic kingdoms. These apparently contradictory perspectives can be reconciled by understanding that, in general, rates and patterns of prokaryotic evolution reflect the developmental history of the Earth's surface environments. Our understanding of modern microbial ecology provides a lens through which our accumulating knowledge of physiology, molecular phylogeny and the Earth's history can be integrated and focussed on the phenomenon of prokaryotic evolution.

NASA Discipline Number 52-30↗
DOE OSTI2018

Adaptive evolution of genomically recoded Escherichia coli

Significance The construction of an organism with an altered genetic code negatively impacted its fitness. We evolved this organism for ∼1,100 generations in the laboratory to recover fitness and learn what changes would accumulate during evolutionary trajectories toward faster growth rates. We observed several selective mutations that helped alleviate insufficient translation termination or that corrected for unintended mutations that accumulated when we originally altered the genetic code. Further observed mutations were generally adaptive in a nonrecoded background. This work bolsters our understanding of the pliability of the genetic code and will help guide future efforts seeking to recode genomes. Finally, it results in a useful strain for nonstandard amino acid incorporation in numerous contexts relevant for research and industry.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Mathematical modelling of the concave front in the adjacent high explosive detonation problem

This study presents an analysis of the transition-zone in adjacent high explosive (HE) detonation problems which uses a $D, 𝜅, \dot{D}$ relationship, where $D$ is the detonation front-normal velocity, 𝜅 is the detonation front curvature and $\dot{D}$ is the time derivative of detonation front-normal velocity. Our approach extends the traditional $(D, 𝜅)$ model to accurately predict the behaviour of both diverging and converging detonation shock fronts. Our findings affirm that a hyperbolic type of front evolution equation, enhanced with wave acceleration, provides a robust framework for modelling complex shock front dynamics in HE materials. This approach not only captures the natural effects of straightness and boundary slope jumps in the transition-zone but also bridges the gap between mathematical predictions and experimental observations, offering insights into the behaviour of both diverging and converging detonation propagations in a homogeneous HE.

acceleration↗
DOE OSTI2025

An investigation of the physical and chemical changes of Pd nanoparticles on carbon supports in response to the release of hydrogen from aqueous formate solutions

Palladium nanoparticles on carbon supports (Pd/C) are effective for catalyzing hydrogen release from aqueous formate solutions but typically suffer from a gradual decrease of activity. This study finds two primary factors influencing activity: (i) the number of available surface Pd sites, and (ii) metal-support interactions which depend on the nature of the C support. We propose that the Pd/C catalyst is structure insensitive and undergoes Ostwald ripening to yield an active ‘conditioned’ catalyst with dispersion plateauing between ca. 15–20 %. Contrary to earlier studies, in-situ XANES experiments show that PdO is not an active catalyst for formate dehydrogenation. Calcination of Pd/C before dehydrogenation increases the catalytic activity which suggests a beneficial, albeit temporary, modification of the metal support interaction. N-containing supports minimize nanoparticle growth and also increase activity through a metal-support interaction. In conclusion, these findings advance our understanding of catalyst evolution and stability in formate dehydrogenation systems.

Formate dehydrogenation↗
DOE OSTI2026

Electron–Ion Covariance Reveals Geometry-Resolved Inner-Shell Spectra in CS 2 Photodissociation

The chemical shifts of inner-shell atomic orbitals are highly sensitive to chemical bonding and molecular structure. In evolving systems, however, the spectra of distinct molecular species and geometries overlap, obscuring the underlying chemical dynamics. Here we demonstrate the use of electron–ion covariance analysis to combine the structural sensitivity of Coulomb explosion imaging with inner-shell spectroscopy, yielding geometry-specific spectra of transient and product species. We apply this approach to the excited state dynamics of CS 2 probed by ionization above the S 2p edge. Electron–ion covariance with time- and momentum-selected S + and S 2+ ions isolates distinct S 2p photoelectron spectra for ground-state CS 2 , bent photoexcited CS 2 , the CS photoproduct, and bare atomic sulfur ─ species whose spectra overlap strongly in the channel-averaged measurement. Clear chemical shifts are observed in the covariance photoelectron spectrum for each of these species, all of which are consistent with high-level calculations. Here, by extracting the atomic S contribution to the photoelectron spectrum in a finely time-resolved manner we can disentangle this contribution to the overall time-resolved photoelectron spectrum as the photodissociation proceeds. These results demonstrate the promise of electron–ion covariance as a general approach to geometry-resolved inner-shell spectroscopy, opening a route to tracking structural evolution through chemical shifts in complex photoexcited molecules.

Ionization↗
DOE OSTI2025

Characterizing laser-heated polymer foams with simultaneous x-ray fluorescence spectroscopy and Thomson scattering at the Matter in Extreme Conditions Endstation at LCLS

Understanding the behavior of polymer foams at high energy density conditions is crucial to advance inertial fusion energy research. Here, we present a new experimental platform designed to measure the thermodynamic state of these materials at megabar pressures. At the Matter in Extreme Conditions Endstation of the Linac Coherent Light Source, we heat samples using an optical, high-intensity, femtosecond laser and dynamically probe them with ultra-short, coherent x-ray pulses of high peak brightness. We perform x-ray Thomson scattering measurements in forward and backward scattering geometries to capture both collective and non-collective electron behavior in the sample. Simultaneously, x-ray fluorescence spectroscopy is used to measure the emission from a mid-Z dopant, providing complementary information on the plasma conditions. By combining these techniques, we obtain temporally resolved temperature measurements of the transient warm dense matter states. Our initial experiments designed to benchmark the platform with carbon samples yielded data resolving the ultrafast response to laser heating with sub-picosecond resolution, measuring plasma temperatures exceeding 50 eV. These findings lay the foundation for precision studies of the dynamic evolution of laser-heated polymer foams.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

High-quality Acinetobacter genomes recovered from combat wounds via metagenomic sequencing resemble cultured isolate genomes

The ability to accurately characterize wound pathogens is critical to informing clinical decisions for wound infections with complex treatment requirements. Acinetobacter baumannii is an impactful nosocomial pathogen in combat wounds and civilian hospital-acquired infections. An informed understanding of the phylogenetics and epidemiology of A. baumannii infections in military and civilian environments could guide approaches that improve antibiotic treatment regimens for both military and civilian patients. Whole-genome data for bacterial strains can be difficult to obtain due to challenges in culturing isolates from preserved military specimens. Metagenomic sequencing and assembly create opportunities for genomic analysis of pathogens directly from clinical specimens. The ability to perform comparative analyses between metagenome-derived genomes and culture-derived genomes would support a range of comparative bacterial genomic studies. Wound tissue biopsy and effluent samples from combat injuries were subjected to metagenomic sequencing and assembly. In total, 42 microbial metagenome-assembled genomes (MAGs) were obtained directly from metagenomic sequence data, 36 of which were designated “high” quality. Thirty of these genomes corresponded to Acinetobacter, with 29 mapping specifically to A. baumannii. Other observed genera included Bordetella, Citrobacter, Escherichia, and Pseudomonas. Single-copy and multi-copy orthologs were identified across Acinetobacter MAGs and publicly available isolate genomes derived from military and civilian sources. Both MAG and military isolate genomes were annotated with antimicrobial resistance data, and MAG genomes were statistically comparable to genomes obtained from isolates. Our results highlight the potential of de novo metagenome assembly for enabling high-resolution characterization directly from clinical specimens, thereby improving diagnostic precision, guiding antimicrobial stewardship, and enhancing understanding of pathogen evolution across diverse healthcare and battlefield environments.

Acinetobacter baumannii↗