Search NASA⌕ Search

SEARCH · Search NASA

Results for “Linear”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Measuring Electron Temperature Using a Linear Polarizer Versus a Polarization Camera

Polarized K-coronal brightness (pB) of the solar corona can be measured by taking four successive coronal brightness images through a linear polarizer, by turning it through four successive angles in intervals of 45∘ and using a standard formula to measure pB from the total coronal brightness (TB) that contains both the polarized K- and the unpolarized F-coronal brightness. The question is: will the time-dependent, highly dynamic corona illuminate each pixel with the same brightness during the time it takes to take the four successive images? To mitigate this problem we now have the polarization camera, in which, each super-pixel is made up of four sub-pixels, and built in to these four sub-pixels is a polarization mask that contains four linear polarizers orientated at four angles 45∘ apart. This allows the measurement of pB to be made in a single exposure. Here, the question is: will the variations of the coronal brightness in the four adjacent sub-pixels in a super-pixel be sufficiently negligible to assume that they observe the same part of the corona? This article looks for answers to these two questions by conducting two synthetic experiments to measure the electron temperature in the plane of the sky on a spherically asymmetric model (SAM) corona by first using a linear polarizer, and then replacing it with a polarization camera and use statistical analyses to determine how well the measured temperature matched the true temperature for the two cases.

Reginald, Nelson↗
NASA NTRSDate not supplied

Performance and Portability of a Linear Solver Across Emerging Architectures

A linear solver algorithm used by a large-scale unstructured-grid computational fluid dynamics application is examined for a broad range of familiar and emerging architectures. Efficient implementation of a linear solver is challenging on recent CPUs offering vector architectures. Vector loads and stores are essential to effectively utilize available memory bandwidth on CPUs, and maintaining performance across different CPUs can be difficult in the face of varying vector lengths offered by each. A similar challenge occurs on GPU architectures, where it is essential to have coalesced memory accesses to utilize memory bandwidth effectively. In this work, we demonstrate that restructuring a computation, and possibly data layout, with regard to architecture is essential to achieve optimal performance by establishing a performance benchmark for each target architecture in a low level language such as vector intrinsics or CUDA. In doing so, we demonstrate how a linear solver kernel can be mapped to Intel® Xeon™ and Xeon Phi™, Marvell® ThunderX2®, NEC® SX-Aurora™ TSUBASA Vector Engine, and NVIDIA® and AMD® GPUs. We further demonstrate that the required code restructuring can be achieved in higher level programming environments such as OpenACC, OCCA, and Intel® OneAPI™/SYCL, and that each generally results in optimal performance on the target architecture. Relative performance metrics for all implementations are shown, and subjective ratings for ease of implementation and optimization are suggested.

Programming models↗
NASA NTRSDate not supplied

Adjoint-based Sensitivities of Flutter Predictions based on the Linearized Frequency-domain Approach

Flutter is a critical factor in designing and certifying aircraft. The linearized frequency-domain method offers a lower cost alternative to time-marching computational fluid dynamics for high-fidelity flutter analysis. In this work, adjoint-based sensitivities are added to a flutter analysis based on the linearized frequency-domain method to efficiently compute derivatives of flutter cost functions with respect to design variables or uncertain parameters. The derivation of the adjoint equations, which involve complications such as derivatives of a nonlinear generalized eigenvalue problem with complex-valued inputs and derivatives of the linearized Navier-Stokes equations, is provided. The implemented adjoint terms and derivatives are verified before demonstrating the approach for derivatives of flutter dynamic pressure with respect to Mach number for the AGARD 445.6 wing.

Aeroelasticity↗
NASA NTRS2018

Fast Linearized Coronagraph Optimizer (FALCO) I: A Software Toolbox for Rapid Coronagraphic Design and Wavefront Correction

The Fast Linearized Coronagraph Optimizer (FALCO) is an open-source toolbox of routines for coronagraphic focal plane wavefront correction. The goal of FALCO is to provide a free, modular framework for the simulation or testbed operation of several common types of coronagraphs. FALCO includes routines for pair-wise probing estimation of the complex electric field and Electric Field Conjugation (EFC) control, and we ask the community to contribute other wavefront correction algorithms. FALCO utilizes and builds upon PROPER, an established optical propagation library. The key innovation in FALCO is the rapid computation of the linearized response matrix for each deformable mirror (DM), which facilitates re-linearization after each control step for faster DM-integrated coronagraph design and wavefront correction experiments. FALCO is freely available as source code in MATLAB at github.com/ajeldorado/falco-matlab and will be available later this year in Python 3 at github.com/ajeldorado/falco-python.

Shaklan, Stuart B.↗
NASA NTRSDate not supplied

PMSM Parameter Estimation using a Linear Unknown Input Interval Observer

In this paper, the problem of permanent magnet synchronous motor (PMSM) speed and unknown load torque estimation is addressed. For this purpose, a interval unknown input observer (UIO) for linear time-invariant (LTI) systems is used. First, the PMSM model is linearized in order to make it in a suitable form for the linear interval UIO. Then, the interval UIO is applied to allow the joint estimation of the motor speed and the unknown load torque disturbance. The main advantages of this approach is that it not only allows the joint state and unknown input estimation, but also to take the different uncertainty sources into account. Indeed, taking model and measurement uncertainty into account is crucial. Assuming that the measurement noise and disturbances are bounded, lower and upper bounds are first computed for the unmeasured state (motor speed) and then for the unknown input (load torque). The proposed approach and its limitations are demonstrated with the nonlinear PMSM model derived from its equivalent electrical circuit.

Elinirina I Robinson↗
NASA NTRSDate not supplied

Flutter-Constrained Optimization with the Linearized Frequency-Domain Approach

Due to the high computational cost associated with unsteady aeroelastic analysis, state-of-the-art aeroelastic optimizations based on computational fluid dynamics typically ignore critical constraints like flutter and aeroelastic gust response. The linearized frequency-domain method offers an approach for adding high-fidelity flutter constraints to multidisciplinary optimizations at relatively low cost compared to other unsteady computational fluid dynamics methods. In recent work, sensitivities have been implemented for the linearized frequency-domain method in FUN3D. In this work, the linearized frequency-domain method and associated sensitivities are applied to gradient-based aeroelastic optimization with flutter constraints based on computational fluid dynamics. An overview of the flutter constraint formulation and implementation is provided, and then two optimization problems are presented. The first optimization increases the flutter speed of a pitch and plunge airfoil at transonic conditions using the minimal amount of geometric changes. The second optimization minimizes the mass of the AGARD 445.6 wing subject to a flutter constraint.

Aeroelasticity↗
NASA NTRSDate not supplied

Flutter-Constrained Optimization with the Linearized Frequency-Domain Approach

Due to the high computational cost associated with unsteady aeroelastic analysis, state-of-the-art aeroelastic optimizations based on computational fluid dynamics typically ignore critical constraints like flutter and aeroelastic gust response. The linearized frequency-domain method offers an approach for adding high-fidelity flutter constraints to multidisciplinary optimizations at relatively low cost compared to other unsteady computational fluid dynamics methods. In recent work, sensitivities have been implemented for the linearized frequency-domain method in FUN3D. In this work, the linearized frequency-domain method and associated sensitivities are applied to gradient-based aeroelastic optimization with flutter constraints based on computational fluid dynamics. An overview of the flutter constraint formulation and implementation is provided, and then two optimization problems are presented. The first optimization increases the flutter speed of a pitch and plunge airfoil at transonic conditions using the minimal amount of geometric changes. The second optimization minimizes the mass of the AGARD 445.6 wing subject to a flutter constraint.

Aeroelasticity↗
NASA NTRSDate not supplied

Estimation of Permanent Magnet Synchronous Motor Parameters using a Linear Unknown Input Interval Observer

This paper develops and evaluate a technique to estimate the speed and unknown load torque of a permanent magnet synchronous motor (PMSM). An interval unknown input observer (UIO) for linear time-invariant (LTI) systems is designed and utilized to estimate the PMSM parameters. Interval UIOs are advantageous as they allow for the estimation of both states and unknown inputs, while accounting for varying uncertainty sources, such as model and measurement uncertainties inherent in dynamic systems and processes. First, the nonlinear PMSM model is linearized to transform it to a suitable form for application of the linear interval UIO. Then, the interval UIO is applied to jointly estimate the motor speed and the unknown load torque disturbance. Assuming that the measurement noise and disturbances are bounded, lower and upper bounds are first computed for the unmeasured state (motor speed) and then for the unknown input (load torque). The proposed approach and its limitations are demonstrated for the nonlinear PMSM model derived from its equivalent electrical circuit.

Elinirina I Robinson↗
NASA NTRSDate not supplied

Linear Array Photodiode and Data Acquisition System Development for Multi-Point Line FLDI Measurements

The continuous development and advancement of multi-point line focused laser differential interferometry (FLDI) instruments requires larger numbers of acquisition channels to make more finely spatially resolved measurements of high-frequency flow fluctuations. No current off-the-shelf system exists for these line FLDI measurements, and so a single unified system consisting of a linear array photodiode, required electronics, and a data acquisition system has been developed to enhance the measurement resolution, both spatially and temporally. A printed circuit board was developed on which the linear array photodiode is mounted for inclusion into an existing FLDI system, and amplifier breakout boards incorporate electronics to condition the signal for the data acquisition system while retaining the necessary high frequency response. The data acquisition system uses a National Instruments chassis and multiple oscilloscope modules, with a specially-designed LabVIEW user interface for laboratory and wind tunnel setup, calibration, and testing. Details regarding the development of the linear array photodiode system and the data acquisition system are provided, and systematic testing of all components is presented, culminating in a test of the system integrated into an existing line FLDI system for measurements of a turbulent jet.

Joshua M Weisberger↗
NASA NTRSDate not supplied

Linearized Frequency-Domain Gust Analysis and Adjoint-Based Sensitivities

Gust analysis is added to a linearized frequency-domain method in FUN3D, a NASA computational fluid dynamics solver. The method linearizes about a nonlinear static equilibrium condition and is therefore appropriate for problems with small perturbations such as transonic stochastic gust analysis. In addition to the gust analysis, adjoint-based sensitivities of stochastic gust constraints are implemented for multidisciplinary design optimization. The linearized frequency-domain gust model and adjoint-based sensitivities are described and verified. The method is applied to an optimization for mass minimization of the AGARD 445.6 wing subject to a stochastic gust constraint limiting the displacement of the wing tip.

Aeroelasticity↗
DOE OSTI2024

A Mixed Integer Linear Programming-basedDistributed Energy Management for Three-phaseUnbalanced Active Distribution Network

A mixed integer linear programming (MILP)–baseddistributed energy management for three-phase unbalancedactive distribution network is proposed. Modern distributionnetworks have becoming more and more active with increasingdeployment of microgrids, distributed energy resources (DERs)as well as controllable loads. Considering various ownership andcontrol models of microgrids, DERs and controllable loads, adistributed energy management was formulated using the alternatingdirection method of multipliers (ADMM) algorithm. ByADMM, the distribution management system (DMS) and theseactive components are coordinated through price signals, whichare adjusted according to the generation-load mismatch per nodeper phase. To enable resolution of the ADMM-based distributedoptimization using more accessible and popular MILP solver,different linearization techniques were proposed to linearize theaugmented Lagrangian terms and other nonlinear terms. Resultsof case studies on a three-phase active distribution network withthree microgrids and several DERs and controllable loads validatedthe effectiveness of proposed MILP-based distributed energymanagement. In addition, the capability of proposed method inmitigating phase power unbalance has been demonstrated.

Liu, Guodong↗
DOE OSTI2025

Compensating for Amplifier Non-Linearity in a SEL Controller

The Self-Excited Loop (SEL) architecture, used in some continuous-wave (CW) superconducting linacs, relies on a positive feedback mechanism that requires carefully defined operating limits to ensure stable operation. These limits are typically derived from amplifier calibration, which characterizes the relationship between forward power and DAC drive. However, amplifier non-linearity often prevents a simple linear fit of this characteristic, introducing errors that can compromise stability. To address this, we present a modified calibration procedure that incorporates amplifier non-linearity into the SEL framework. The approach is validated with test data from a 32 kW solid-state amplifier (SSA) and a cavity emulator developed for the Fermilab PIP-II linac.

Raman, S. [Fermilab] (ORCID:0009000735937206)↗
DOE OSTI2025

Rational Design of Methylated Triazine‐Based Linear Conjugated Polymers for Efficient CO 2 Photoreduction with Water

The development of semiconducting conjugated polymers for photoredox catalysis holds great promise for sustainable utilization of solar energy. In this work, a new family of porous methylated triazine‐based linear conjugated polymers is reported that enable efficient photoreduction of carbon dioxide (CO 2 ) with water (H 2 O) vapor, in the absence of any additional photosensitizer, sacrificial agents or cocatalysts. It is demonstrated that the key lies in the generation of methylated triazine linkages through a facile condensation reaction between benzamidine and acetic anhydride, which impedes the formation of conventional triazine‐based frameworks. It is also shown that regulating conjugated linear backbones with different lengths of electron‐donated benzyl units provides a facile means to modulate their optical properties and the exciton dissociation, thereby affording more long‐lived photogenerated charge carriers and boosting charge separation and transfer. A high‐performance carbon monoxide (CO) production rate of 218.9 µmol g −1 h −1 is achieved with ≈ 100% CO selectivity, which is accompanied by exceptional H 2 O oxidation to oxygen (O 2 ). It anticipates this new study will advance synthetic approaches toward polymeric semiconductors and facilitate new possibilities for triazine‐based conjugated polymers with promising potential in artificial photocatalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Solution of the linear wave-particle kinetic equation for global modes of arbitrary frequency in a tokamak

The linear response of a plasma to perturbations of arbitrary frequency and wavelength is derived for any axisymmetric magnetized toroidal plasma. An explicit transformation to action-angle coordinates is achieved using orthogonal magnetic coordinates and the Littlejohn Lagrangian, establishing the validity of this result to arbitrary order in normalized Larmor radius. The global resonance condition for compressional modes is clarified in more detail than in previous works, confirming that the poloidal orbit-average of the cyclotron frequency gives the desired result at lowest order in Larmor radius. The global plasma response to the perturbation at each resonance is captured by a poloidal and gyroaverage of the perturbing potential. A “global gyroaveraging” of the potential is a natural by-product of this analysis which takes into account the changing of the magnetic field over an orbit. The resonance condition depends on two arbitrary integers which completely separately capture the effects poloidal non-uniformity and finite Larmor radius in generating sidebands. We learn that poloidal sidebands generated for compressional modes are dominated by the change in gyrofrequency over the orbit, which is very different to shear modes where the gyrofrequency only contributes via a finite Larmor radius effect. This increases the number of bounce harmonics required to compute the linear drive, giving a more complicated resonance map. An example calculation is given comparing resonance of shear and compressional modes in a published DIII-D case.

Compressional↗
DOE OSTI2024

RandONets: Shallow networks with random projections for learning linear and nonlinear operators

Deep neural networks have been extensively used for the solution of both the forward and the inverse problem for dynamical systems. However, their implementation necessitates optimizing a high-dimensional space of parameters and hyperparameters. This fact, along with the requirement of substantial computational resources, pose a barrier to achieving high numerical accuracy, but also interpretability. Here, to address the above challenges, we present Random Projection-based Operator Networks (RandONets): shallow networks with random projections and tailor-made numerical analysis methods that learn accurately and fast linear and nonlinear operators. Building on previous works, we prove that RandOnets are universal approximators of linear and nonlinear operators. Due to their simplicity, RandONets provide a one-step transformation of the input space, facilitating interpretability. For the evaluation of their performance, we focus on operators of PDEs. We show, that RandONets outperform by several orders of magnitude, both in terms of numerical approximation accuracy and computational cost, the “vanilla” DeepONets. Hence, we believe that our method will trigger further developments in the field of scientific machine learning, for the development of new ‘’light”schemes that will provide high accuracy while reducing dramatically the computational cost. A MATLAB toolbox for RandONets, including demos, is available on GitHub at https://github.com/GianlucaFabiani/RandONets.

Interpretable machine learning↗
DOE OSTI2025

Summary of Working Group 7: Linear colliders

The contributions presented during the Working Group 7: Linear Colliders (WG7) sessions at the 2024 Advanced Accelerator Concepts Workshop are briefly summarized, as well as the discussions regarding a design initiative for a linear collider based on wakefield accelerator technology.

Advanced Accelerator Concepts↗
DOE OSTI2025

γIn-beam angular distribution and linear polarization measurements with GRETINA using a simple energy-ordering approach

Angular distribution and linear polarization measurements are powerful tools for inferring the spins and parities of nuclear levels. In this work, the performance of the Gamma-Ray Energy Tracking In-beam Nuclear Array (GRETINA) as a Compton polarimeter was characterized in a fusion-evaporation reaction experiment using a simple energy-ordering approach for the interaction points assigned in the signal decomposition process. A variety of multipolarities and characters for γ-ray transitions in the reaction products 25 Mg, 25 Na, and 22 Ne, formed from fusion-evaporation of an 18 O beam on a 9 Be target, were examined. The experimental angular distributions and linear polarization asymmetries were consistent with predictions using the theoretical formalism accounting for the Lorentz boost.

Angular distribution↗
DOE OSTI2025

Broadband Infrared Carbon Nanotube Linear Photodetector Arrays

Carbon nanotubes (CNTs) possess exceptional optoelectronic properties, including broadband absorption and high absorption coefficients, making them promising candidates for photodetector applications. However, conventional designs often rely on single or aligned nanotubes, which restrict device scalability and require complex fabrication techniques. Here, in this work, we address these limitations by utilizing CNT-suspended solutions to fabricate large-area photodetectors based on CNT networks via vacuum filtration and direct laser scribing. CNT networks are uniformly formed onto low-thermal-conductance polymeric filter papers that serve as substrates and mitigate the need for suspended structures, reducing the fabrication complexity and cost. The CNT films are patterned into single devices and 49-pixel linear arrays by using a laser-cutting process, enabling scalable and cost-effective production. The resulting devices operate as bolometers and exhibit broad spectral sensitivity extending from visible to midwave infrared, showing stable operation at room temperature. We further demonstrate proof-of-concept IR imaging using linear arrays.

IR imaging↗