Search NASA⌕ Search

SEARCH · Search NASA

Results for “Magnetization Dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Accelerated vortex dynamics across the magnetic 3D-to-2D crossover in disordered superconductors

Disorder can have remarkably disparate consequences in superconductors, driving superconductor–insulator transitions in ultrathin films by localizing electron pairs and boosting the supercurrent carrying capacity of thick films by localizing vortices (magnetic flux lines). Though the electronic 3D-to-2D crossover at material thicknesses d ~ ξ (coherence length) is well studied, a similarly consequential magnetic crossover at d ~ L c (pinning length) that should drastically alter material properties remains largely underexamined. According to collective pinning theory, vortex segments of length L c bend to adjust to energy wells provided by point defects. Consequently, if d truncates L c , a change from elastic to rigid vortex dynamics should increase the rate of thermally activated vortex motion S. Here, we characterize the dependence of S on sample thickness in Nb and cuprate films. The results for Nb are consistent with collective pinning theory, whereas creep in the cuprate is strongly influenced by sparse large precipitates. In conclusion, we leverage the sensitivity of S to d to determine the generally unknown scale L c , establishing a new route for extracting pinning lengths in heterogeneously disordered materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Vehicle Dynamics due to Magnetic Launch Propulsion

The field of Magnetic Levitation Lind Propulsion (MagLev) has been around for over 30 years, primarily in high-speed rail service. In recent years, however, NASA has been looking closely at MagLev as a possible first stage propulsion system for spacecraft. This approach creates a variety of new problems that don't currently exist with the present MagLev trains around the world. NASA requires that a spacecraft of approximately 120,000 lbs be accelerated at two times the acceleration of gravity (2g's). This produces a greater demand on power over the normal MagLev trains that accelerate at around 0.1g. To be able to store and distribute up to 3,000 Mega Joules of energy in less than 10 seconds is a technical challenge. Another problem never addressed by the train industry and, peculiar only to NASA, is the control of a lifting body through the acceleration of and separation from the MagLev track. Very little is understood about how a lifting body will react with external forces, Such as wind gusts and ground effects, while being propelled along on soft springs such as magnetic levitators. Much study needs to be done to determine spacecraft control requirements as well as what control mechanisms and aero-surfaces should be placed on the carrier. Once the spacecraft has been propelled down the track another significant event takes place, the separation of the spacecraft from the carrier. The dynamics involved for both the carrier and the spacecraft are complex and coupled. Analysis of the reaction of the carrier after losing, a majority of its mass must be performed to insure control of the carrier is maintained and a safe separation of the spacecraft is achieved. The spacecraft angle of attack required for lift and how it will affect the carriage just prior to separation, along with the impacts of around effect and aerodynamic forces at ground level must be modeled and analyzed to define requirements on the launch vehicle design. Mechanisms, which can withstand the expected forces and allow the spacecraft to separate at the desired time must be developed. Modeling and analysis of the full-scale system must be developed to derive the requirements for design of the separation mechanisms. A description of several MagLev demonstrators will be presented and the testing and analysis to model the demonstrators will be included.

Galaboff, Zachary J.↗

Generation of disc-like plasma from laser-matter interaction in the presence of a strong external magnetic field

Dynamics of laser produced plasma in a strong magnetic field was studied here using a 1 MA pulsed power generator coupled to an intense, high-energy laser. A 2–2.5 MG magnetic field was generated on the surface of a rod load 0.8–1.2 mm in diameter. A sub-nanosecond laser pulse with intensity of 3 × 10 15 W cm -2 was focused on the rod load surface. Side-on laser diagnostics showed the generation of two collimated jets 1–3 mm long on the front and rear sides of the load. End-on laser diagnostics reveal that the laser produced plasma in the MG magnetic field takes the form of a thin disc as the plasma propagates along the magnetic field lines. The disc-like plasma expands radially across the magnetic field with a velocity of 250 km s -1 . An electron temperature of 400 eV was measured in the laser-produced plasma on the rod load.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Irreversibility Line Measurement and Vortex Dynamics in High Magnetic Fields in Ni- and Co-Doped Iron Pnictide Bulk Superconductors

The de-pinning or irreversibility lines were determined by ac susceptibility, magnetization, radio-frequency proximity detector oscillator (PDO), and resistivity methods in Ba(Fe 0.92 Co 0.08 ) 2 As 2 ( T c = 23.2 K), Ba(Fe 0.95 Ni 0.05 ) 2 As 2 ( T c = 20.4 K), and Ba(Fe 0.94 Ni 0.06 ) 2 As 2 ( T c = 18.5 K) bulk superconductors in ac, dc, and pulsed magnetic fields up to 65 T. A new method of extracting the irreversibility fields from the radio-frequency proximity detector oscillator induction technique is described. Wide temperature broadening of the irreversibility lines, for any given combination of ac and dc fields, is dependent on the time frame of measurement. Increasing the magnetic field sweep rate (dH/dt) shifts the irreversibility lines to higher temperatures up to about dH/d t = 40,000 Oe/s; for higher dH/dt, there is little impact on the irreversibility line. There is an excellent data match between the irreversibility fields obtained from magnetization hysteresis loops, PDO, and ac susceptibility measurements, but not from resistivity measurements in these materials. Lower critical field vs. temperature phase diagrams are measured. Their very low values near 0 T indicate that these materials are in mixed state in nonzero magnetic fields, and yet the strength of the vortex pinning enables very high irreversibility fields, as high as 51 T at 1.5 K for the Ba(Fe 0.92 Co 0.08 ) 2 As 2 polycrystalline sample, showing a promise for liquid helium temperature applications.

36 MATERIALS SCIENCE↗

Observation of stacking engineered magnetic phase transitions within moiré supercells of twisted van der Waals magnets

Abstract Recent demonstrations of moiré magnetism, featuring exotic phases with noncollinear spin order in the twisted van der Waals (vdW) magnet chromium triiodide CrI 3 , have highlighted the potential of twist engineering of magnetic (vdW) materials. However, the local magnetic interactions, spin dynamics, and magnetic phase transitions within and across individual moiré supercells remain elusive. Taking advantage of a scanning single-spin magnetometry platform, here we report observation of two distinct magnetic phase transitions with separate critical temperatures within a moiré supercell of small-angle twisted double trilayer CrI 3 . By measuring temperature-dependent spin fluctuations at the coexisting ferromagnetic and antiferromagnetic regions in twisted CrI 3 , we explicitly show that the Curie temperature of the ferromagnetic state is higher than the Néel temperature of the antiferromagnetic one by ~10 K. Our mean-field calculations attribute such a spatial and thermodynamic phase separation to the stacking order modulated interlayer exchange coupling at the twisted interface of moiré superlattices.

36 MATERIALS SCIENCE↗

Magnetic frustration driven by conduction carrier blocking in Nd 2 Co 0.85 Si 2.88

The intermetallic compound Nd 2 Co 0.85 Si 2.88 having a triangular lattice could be synthesized in single phase only with defect crystal structure. Investigation through different experimental techniques indicate the presence of two magnetic transitions in the system. As verified experimentally and theoretically, the high-temperature transition $T_H$ ~ 140 K is associated with the development of ferromagnetic interaction between itinerant Co moments, whereas the low-temperature transition at $T_L$ ~ 6.5 K is due to the coupling among Nd–4$\textit{f}$ and Co–3$\textit{d}$ moments, which is antiferromagnetic in nature. Detailed studies of temperature-dependent dc magnetic susceptibility, field dependence of isothermal magnetization, nonequilibrium dynamical behavior, viz., magnetic relaxation, aging effect, magnetic-memory effect, and temperature dependence of heat capacity, along with density functional theory (DFT) calculations, suggest that the ground state is magnetically frustrated spin glass in nature, having competing magnetic interactions of equivalent energies. DFT results further reveal that the 3$\textit{d}$/5$\textit{d}$-conduction carriers are blocked in the system and act as a barrier for the 4$\textit{f}$–4$\textit{f}$ RKKY interactions, resulting in spin frustration. Presence of vacancy defects in the crystal are also conducive to the spin frustration. This is an unique mechanism of magnetic frustration, not emphasized so far in any of the ternary $R_2TX_3$ ($\textit{R}$ = rare earth, $\textit{T}$ = transition elements, and $\textit{X}$ = Si, Ge, In) type compounds. Due to the competing character of the itinerant 3$\textit{d}$ and localized 4$\textit{f}$ moments, the compound exhibits anomalous field dependence of magnetic coercivity. Further, the system also exhibits a considerable magnetic entropy change of –Δ$S_M$ ~ 13.3 J/kg K with a relative cooling power (RCP) of 220 J/kg and adiabatic temperature change $ΔT_{\text{ad}}$ of 6 K for magnetic field change of 70 kOe.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The theoretical output of a ring core fluxgate sensor.

Demonstration that the output from a ring core sensor is directly proportional to the first time derivative of the product of dynamic permeability and magnetic intensity perturbation within the core caused by an external, uniform magnetic field. (Dynamic permeability is defined to be the slope of the hysteresis loop at a given point in time). Assuming that ellipsoidal shells can approximate the core, the demagnetization factor can be 'estimated' in the first order to be proportional to the first power of the quantity tape thickness (or number of wraps) divided by the core diameter. The constant of proportionality is determined from laboratory data. When an additional scale adjustment is applied to the resulting sensor output formula, the computed output tracks laboratory data for a range of sensor geometries.

Burger, J. R.↗

Some initial ISEE-1 results on the ring current composition and dynamics during the magnetics storm of December 11, 1977

On December 11, 1977 the ISEE-1 spacecraft traversed the equatorial magnetosphere in the prenoon and dawn sectors during the early recovery phase of a magnetic storm with peak DST of -125 gamma. Along the dayside leg O(+) was comparable to or exceeded H(+) in number density in the energy range 0.1-17 keV. The velocity distribution of O(+) showed a characteristic dispersion, consistent with the ions being transported to the dayside from the dusk to midnight sector. The high-energy slope of the H(+) and O(+) distribution functions showed different radial dependence, with the slope of H(+) being consistent with a harder component carrying most of the energy density.

Lennartsson, W.↗

The dynamics of fibril magnetic fields. I - Effect of flux tubes on convection. II - The mean field equations

Observations have established the general fibril state of the magnetic field at the visible surface of the sun. This extraordinary state of the field, in separate intense flux tubes, implies that the convection has a relatively permanent, closed topology, in spite of the large Reynolds number. This paper explores some of the effects of the separate flux tubes on the convective motions, generally pushing the convective cells toward aligning their downdrafts with the flux tubes so as to minimize the dissipation.

Parker, E. N.↗