Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mathematical Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Discrete Control of a Dynamical System with Delay Under Conditions of Uncertainty

In this paper, we present a numerical solution of the discrete control problem for the immune response in an infectious disease under conditions of uncertainty. This problem is described by a nonlinear system of ordinary differential equation with delay. Conditions of uncertainty mean that values of the parameters of the model are unknown and their estimates are corrected by new experimental data. We propose an algorithm that allows one, within the framework of the mathematical model of an infectious disease, to construct the control and to identify parameters. By using the algorithm proposed, we develop treatment programs based on immunotherapy. We show that immunotherapy is an effective treatment for all main forms of disease: acute, chronic, and lethal.

60 APPLIED LIFE SCIENCES↗

Development, Verification, and Validation of Multiphase Models for Polydisperse Flows

This report describes in detail the technical findings of the DOE Award entitled 'Development, Verification, and Validation of Multiphase Models for Polydisperse Flows.' The focus was on high-velocity, gas-solid flows with a range of particle sizes. A complete mathematical model was developed based on first principles and incorporated into MFIX. The solid-phase description took two forms: the Kinetic Theory of Granular Flows (KTGF) and Discrete Quadrature Method of Moments (DQMOM). The gas-solid drag law for polydisperse flows was developed over a range of flow conditions using Discrete Numerical Simulations (DNS). These models were verified via examination of a range of limiting cases and comparison with Discrete Element Method (DEM) data. Validation took the form of comparison with both DEM and experimental data. Experiments were conducted in three separate circulating fluidized beds (CFB's), with emphasis on the riser section. Measurements included bulk quantities like pressure drop and elutriation, as well as axial and radial measurements of bubble characteristics, cluster characteristics, solids flux, and differential pressure drops (axial only). Monodisperse systems were compared to their binary and continuous particle size distribution (PSD) counterparts. The continuous distributions examined included Gaussian, lognormal, and NETL-provided data for a coal gasifier.

01 COAL, LIGNITE, AND PEAT↗

Model selection and parameter estimation in tumor growth models using approximate Bayesian computation-ABC

Cancer is one of the most fatal diseases in the world. Governments and researchers from various areas have continuously concentrated efforts to better understand the disease and propose diagnostic and treatment techniques. The use of mathematical models of tumor growth is of great importance for the development of such techniques. Due to the variety of models nowadays available in the literature, the problems of model selection and parameter estimation come into picture, aiming at suitably predicting the patient’s status of the disease. As the available data on dependent variables of existing models might not justify the use of common likelihood functions, approximate Bayesian computation (ABC) becomes a very attractive tool for model selection and model calibration (parameter estimation) in tumor growth models. In the present study, a Monte Carlo approximate Bayesian computation (ABC) algorithm is applied to select among competing models of tumor growth, with and without chemotherapy treatment. Simulated measurements are used in this work. The results obtained show that the algorithm correctly selects the model and estimates the parameters used to generate the simulated measurements.

60 APPLIED LIFE SCIENCES↗

Surface water vulnerability assessment applying the integrity model as a decision support system for quality improvement

The implementation of the Water Framework Directive (WFD) 2000/60/EC, aimed at achieving a 'Good' Ecological Status of surface water bodies by 2015, indicates the adoption of a River Basin Management approach by using a model which works as a support for decision making. This work has applied the suggestions put forward by the WFD by means of a mathematical model called the Integrity Model. This represents valid support when assessing the efficiency of planned interventions which may directly or indirectly play a role in enhancing the quality of surface waters at the basin scale. Herein the results of a preliminary application limited to just two indexes on the Bacchiglione river basin, located in Northern Italy, are both presented and compared with the results of institutional monitoring activities in compliance with set technical regulations. The proposed model appears to be useful when carrying out Strategic Environmental Assessment (SEA) procedures in accordance with Directive 2001/42/EC concerning water management and protection plans as well as for the Environmental Impact Assessment (EIA) procedure to be carried out on the interventions identified.

54 ENVIRONMENTAL SCIENCES↗

An empirical relationship for extrapolating sparse experimental lap joint data.

Correctly incorporating the influence of mechanical joints in built-up mechanical systems is a critical element for model development for structural dynamics predictions. Quality experimental data are often difficult to obtain and is rarely sufficient to determine fully parameters for relevant mathematical models. On the other hand, fine-mesh finite element (FMFE) modeling facilitates innumerable numerical experiments at modest cost. Detailed FMFE analysis of built-up structures with frictional interfaces reproduces trends among problem parameters found experimentally, but there are qualitative differences. Those differences are currently ascribed to the very approximate nature of the friction model available in most finite element codes. Though numerical simulations are insufficient to produce qualitatively correct behavior of joints, some relations, developed here through observations of a multitude of numerical experiments, suggest interesting relationships among joint properties measured under different loading conditions. These relationships can be generalized into forms consistent with data from physical experiments. One such relationship, developed here, expresses the rate of energy dissipation per cycle within the joint under various combinations of extensional and clamping load in terms of dissipation under other load conditions. The use of this relationship-though not exact-is demonstrated for the purpose of extrapolating a representative set of experimental data to span the range of variability observed from real data.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Compositional modeling in porous media using constant volume flash and flux computation without the need for phase identification

The paper deals with the numerical solution of a compositional model describing compressible two-phase flow of a mixture composed of several components in porous media with species transfer between the phases. The mathematical model is formulated by means of the extended Darcy's laws for all phases, components continuity equations, constitutive relations, and appropriate initial and boundary conditions. The splitting of components among the phases is described using a new formulation of the local thermodynamic equilibrium which uses volume, temperature, and moles as specification variables. The problem is solved numerically using a combination of the mixed-hybrid finite element method for the total flux discretization and the finite volume method for the discretization of transport equations. A new approach to numerical flux approximation is proposed, which does not require the phase identification and determination of correspondence between the phases on adjacent elements. The time discretization is carried out by the backward Euler method. The resulting large system of nonlinear algebraic equations is solved by the Newton–Raphson iterative method. We provide eight examples of different complexity to show reliability and robustness of our approach.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Connection between decoherence and excited state quantum phase transitions

In this work we explore the relationship between an excited state quantum phase transition (ESQPT) and the phenomenon of quantum decoherence. For this purpose, we study how the decoherence is affected by the presence of a continuous ESQPT in the environment. This one is modeled as a two level boson system described by a Lipkin Hamiltonian. We will show that the decoherence of the system is maximal when the environment undergoes a continuous ESQPT.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Development and Evaluation of Occupancy-Aware Model Predictive Control for Residential Building Energy Efficiency and Occupant Comfort

The residential sector accounts for 25% of global primary energy consumption. Two methods have previously been proposed to reduce residential energy use associated with the provision of occupant thermal comfort: 1. Occupancy-based HVAC control, operating systems only during confirmed occupancy, and 2. model predictive control (MPC), harnessing a mathematical model and forecasts to find optimal operating strategies. Previous studies estimate the average energy savings of the two methods individually in the range of 21% and 16%, respectively. The research presented herein was carried out to evaluate the energy savings potential in residential buildings by combining both approaches across different climates, house vintages, and occupancy patterns. Occupancy and eight different physical modalities (e.g. CO2 and VOC) data were collected from five homes for time periods of 4–9 weeks. Collected data sets were used to train occupancy prediction models suggested by an extensive literature survey of occupancy model types. The trained prediction models were combined with MPC and detailed EnergyPlus building simulation models to evaluate residential building performance in terms of annual energy savings and thermal comfort, along with discomfort exceedance metrics. Multiple home types and regions were analyzed to understand regional and climate-dependent potential. Based on actual field data, the occupancy models had a prediction inaccuracy between 8% and 35% across the investigated homes. Average occupancy for the collected data ranged from 56% to 86%, a typical range reported in the literature. Building simulations were conducted for three control scenarios: conventional thermostatic control, occupancy-based, and occupancy-based MPC. The results indicate that all advanced strategies improve upon the conventional control, with some scenarios cutting energy use in half with only occasional incurrence of discomfort. The findings indicate that occupancy-aware model predictive residential building control has the potential to drastically reduce energy use and associated emissions while maintaining occupant comfort for both new and existing buildings.

ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION↗

Controlled localization of interacting bosons in a disordered optical lattice

We show that tunneling and localization properties of interacting ultracold atoms in an optical lattice can be controlled by adiabatically turning on a fast oscillatory force even in the presence of disorder. Our calculations are based on the exact solution of the time-dependent Schroedinger equation, using the Floquet formalism. Implications of our findings for larger systems and the possibility of controlling the phase diagram of disordered-interacting bosonic systems are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Asymmetric (1+1)-dimensional hydrodynamics in high-energy collisions

The possibility that particle production in high-energy collisions is a result of two asymmetric hydrodynamic flows is investigated using the Khalatnikov form of the (1+1)-dimensional approximation of hydrodynamic equations. The general solution is discussed and applied to the physically appealing ''generalized in-out cascade'' where the space-time and energy-momentum rapidities are equal at initial temperature but boost invariance is not imposed. It is demonstrated that the two-bump structure of the entropy density, characteristic of the asymmetric input, changes easily into a single broad maximum compatible with data on particle production in symmetric processes. A possible microscopic QCD interpretation of asymmetric hydrodynamics is proposed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Phase diagram for a cubic-Q interacting boson model Hamiltonian: Signs of triaxiality

An extension of the Interacting Boson Model that includes the cubic (QxQxQ){sup (0)} term is proposed. The potential energy surface for the cubic quadrupole interaction is explicitly calculated within the coherent state formalism using the complete ({chi}-dependent) expression for the quadrupole operator. The Q-cubic term is found to depend on the asymmetry deformation parameter {gamma} as a linear combination of cos(3{gamma}) and cos{sup 2}(3{gamma}) terms, thereby allowing for triaxiality. The phase diagram of the model in the large N limit is explored: The orders of the phase transition surfaces that define the phase diagram are described, and the possible nuclear equilibrium shapes are established. It is found that for this particular Hamiltonian, contrary to expectations, there is only a very tiny region of triaxiality, and that the transition from prolate to oblate shapes is so fast that, in most cases, the onset of triaxiality might go unnoticed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

BPS Skyrme model and baryons at large N{sub c}

Within the class of field theories with the field content of the Skyrme model, one submodel can be found which consists of the square of the baryon current and a potential term only. For this submodel, a Bogomol'nyi-Prasad-Sommerfield bound exists, and the static soliton solutions saturate this bound. Further, already on the classical level, this Bogomol'nyi-Prasad-Sommerfield Skyrme model reproduces some features of the liquid drop model of nuclei. Here, we investigate the model in more detail and, besides, we perform the rigid rotor quantization of the simplest Skyrmion (the nucleon). In addition, we discuss indications that the viability of the model as a low-energy effective field theory for QCD is further improved in the limit of a large number of colors N{sub c}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Constraints on realistic Gauge-Higgs unified models

We investigate the general group structure of gauge-Higgs unified models. We find that a given embedding of the standard model gauge group will imply the presence of additional light vectors, except for a small set of special cases, which we determine; the arguments presented are independent of the compactification scheme. For this set of models we then find those that can both accommodate quarks and have a vanishing oblique T parameter at tree level. We show that none of the resulting models can have |s{sub w}|{approx}1/2 (the sine of the weak-mixing angle) at tree level and briefly discuss possible solutions to this problem.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Minimal representations of supersymmetry and 1D N-Extended {sigma} models

We discuss the minimal representations of the 1D N-Extended Supersymmetry algebra (the Z{sub 2}-graded symmetry algebra of the Supersymmetric Quantum Mechanics) linearly realized on a finite number of fields depending on a real parameter t, the time. Their knowledge allows to construct onedimensional sigma-models with extended off-shell supersymmetries without using superfields.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Catalyst: Fast and flexible modeling of reaction networks

We introduce Catalyst.jl, a flexible and feature-filled Julia library for modeling and high-performance simulation of chemical reaction networks (CRNs). Catalyst supports simulating stochastic chemical kinetics (jump process), chemical Langevin equation (stochastic differential equation), and reaction rate equation (ordinary differential equation) representations for CRNs. Through comprehensive benchmarks, we demonstrate that Catalyst simulation runtimes are often one to two orders of magnitude faster than other popular tools. More broadly, Catalyst acts as both a domain-specific language and an intermediate representation for symbolically encoding CRN models as Julia-native objects. This enables a pipeline of symbolically specifying, analyzing, and modifying CRNs; converting Catalyst models to symbolic representations of concrete mathematical models; and generating compiled code for numerical solvers. Leveraging ModelingToolkit.jl and Symbolics.jl, Catalyst models can be analyzed, simplified, and compiled into optimized representations for use in numerical solvers. Finally, we demonstrate Catalyst’s broad extensibility and composability by highlighting how it can compose with a variety of Julia libraries, and how existing open-source biological modeling projects have extended its intermediate representation.

59 BASIC BIOLOGICAL SCIENCES↗

A Gibbs Energy Minimization Approach for Modeling of Chemical Reactions in a Basic Oxygen Furnace

In modern steelmaking, the decarburization of hot metal is converted into steel primarily in converter processes, such as the basic oxygen furnace. The objective of this work was to develop a new mathematical model for top blown steel converter, which accounts for the complex reaction equilibria in the impact zone, also known as the hot spot, as well as the associated mass and heat transport. An in-house computer code of the model has been developed in Matlab. The main assumption of the model is that all reactions take place in a specified reaction zone. The mass transfer between the reaction volume, bulk slag, and metal determine the reaction rates for the species. The thermodynamic equilibrium is calculated using the partitioning of Gibbs energy (PGE) method. The activity model for the liquid metal is the unified interaction parameter model and for the liquid slag the modified quasichemical model (MQM). The MQM was validated by calculating iso-activity lines for the liquid slag components. The PGE method together with the MQM was validated by calculating liquidus lines for solid components. The results were compared with measurements from literature. The full chemical reaction model was validated by comparing the metal and slag compositions to measurements from industrial scale converter. The predictions were found to be in good agreement with the measured values. Furthermore, the accuracy of the model was found to compare favorably with the models proposed in the literature. The real-time capability of the proposed model was confirmed in test calculations.

36 MATERIALS SCIENCE↗