Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mixed Oxides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Impact of Synthetic Parameters on Structure and Electrochemistry of High-Entropy Layered Oxide LiNi 0.2 Co 0.2 Mn 0.2 Al 0.2 Fe 0.2 O 2

Here, this study explored a high-entropy layered oxide (HELO), LiNi 0.2 Co 0.2 Mn 0.2 Al 0.2 Fe 0.2 O 2 , prepared by coprecipitation followed by heat treatment. Coprecipitation yielded a kinetically favored product, and the subsequent heat treatment under various temperatures and times allowed tuning the material toward more thermodynamically favored structures. Refinement of X-ray powder diffraction (XRD) revealed that after 450 °C treatment, ~12% of the Ni 2+ in the structure was located within the lithium cation layer. After heat treatment at 600, 700, and 800 °C, there was a continued decrease of Ni 2+ in the lithium cation layer to 9.3, 6.3, and 3.7%, respectively. Longer heat treatment times at 800 °C decreased the level to 2.5%. Electrochemical behavior was evaluated by cyclic voltammetry, galvanostatic cycling, rate capability testing, and electrochemical impedance spectroscopy, where increased loaded voltage, functional capacity, rate capability, and decreased impedance were observed for samples treated at higher temperatures with lower cation mixing. X-ray absorption near edge spectroscopy (XANES) data indicated that the redox activity of Ni and Co was dominant in the electrochemistry, while the participation of Mn or Fe was minimal. The level of Ni oxidation state change between charge and discharge related to the heat treatment temperature where the samples with high cation mixing showed lower capacity consistent with some Ni 3+ in the transition metal layer inaccessible for electron transfer. Longer heat treatment times at 800 °C did not continue to provide a benefit in electrochemical function even with some additional reduction in cation mixing.

25 ENERGY STORAGE↗
DOE OSTI2024

Facile Interfacial Reduction Suppresses Redox Chemical Expansion and Promotes the Polaronic to Ionic Transition in Mixed Conducting (Pr,Ce)O 2−δ Nanoparticles

Mixed ionic/electronic conductors (MIECs) are essential components of solid-state electrochemical devices, such as solid oxide fuel/electrolysis cells. For efficient performance, MIECs are typically nanostructured, to enhance the reaction kinetics. However, the effect of nanostructuring on MIEC chemo-mechanical coupling and transport properties, which also impact cell durability and efficiency, has not yet been well understood. Here, in this work, Pr 0.2 Ce 0.8 O 2−δ (PCO20) nanopowders were prepared by coprecipitation, then sintered in a modified dilatometer at three different temperatures (600, 725, and 850 °C) for microstructure evolution, resulting in three samples with different average particle sizes (23, 30, and 53 nm). The chemical strain and electronic/ionic conductivity were then measured simultaneously on stable nanostructures in four isotherms from 550 to 400 °C with steps in pO 2 (1 to 10 –4 atm O 2 ). A microcrystalline bar was prepared and measured for comparison. Particle size reduction led to a monotonically decreasing isothermal redox chemical strain, confirmed by in situ high-temperature, controlled-atmosphere XRD measurements. The corresponding conductivity measurements provided defect chemical insight into the particle size-dependent chemical expansion behavior. The significant weakening of the pO 2 dependence and decreased activation energy for electrical conduction with decreasing particle size indicated a decrease in the reduction enthalpy of PCO, shifting the transition from (Pr) polaronic to ionic behavior to higher pO 2 . STEM-EELS measurements confirmed the majority of Pr was reduced to 3+ in the nanoparticles, while Ce remained 4+. These results demonstrate suppression of deleterious chemical expansion and tailoring of the dominant charge carrier simply through controlling the particle size, providing insights for MIEC microstructural design.

ceria↗
DOE OSTI2020

High-throughput investigation of the formation of double spinels

Spinel compounds, with the general chemical formula AB 2 O 4 , are a wide class of materials, where A and B can be a variety of cations, providing this structure with a great deal of functional flexibility and giving rise to its considerable scientific interest. Recently, a spinel with the general formula ABB'O 4 has been predicted, increasing the possible usability of the spinels due to the higher cation diversity in the so-called double spinel structure. In this study, we use density functional theory calculations to predict if double spinels can be formed between experimentally synthesized normal and inverse single spinels. Our computations reveal that 49 double spinels have negative mixing enthalpies and are thus thermodynamically stable, with most of the stable compounds being formed from one of two distinct cation orderings. We show that the 17 different cations that form the different double spinels have a preferred site, tetrahedral or octahedral, except for Mn, Fe and Co which can occupy both sites interchangeably. We also study the relation between mixing enthalpies and cation-specific properties, as well as ways to classify the double spinels into distinct types and spinel groups depending on the cation ordering and cation oxidation states, respectively. Furthermore, by applying the Sure Independence Screening and Sparsifying Operator (SISSO) approach on the coordination-dependent ionic radii of the elemental constituents, we show that an interplay of local strain and electrostatic dominated terms can be used to separate the double spinels into distinct structural types depending on the cation order and their oxidation states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Organic Evaporation, Oxidation, and Hydrolysis Testing in Support of Hanford Sample-and-Send

The Hanford site has approximately 54 to 56 million gallons of radioactive mixed waste stored in 156 unretrieved underground storage tanks. The Hanford Waste Treatment and Immobilization Plant (WTP) is being built to treat and immobilize the tank waste. The baseline method for immobilization of Low Activity Waste (LAW) through the WTP is vitrification, but additional immobilization capacity is needed to supplement the initial LAW melters. An alternative cementitious waste form is being investigated for that future immobilization method. However, one impediment to a cementitious waste form is the presence of Land Disposal Restricted (LDR) organic chemicals in tank waste, which are regulated on a concentration based standard in the final waste form. Hence, if the quantity of organics in LAW is high enough, they must be destroyed or removed to make a waste form compatible with disposal in a mixed low level waste landfill. This work evaluates potential avenues for treatment of LDR organics to eliminate the impediment and permit possible use of a cementitious waste form. Vacuum evaporation testing to remove LDR organics consisted of preparing a non-radioactive LAW simulant, spiking that simulant with organic chemicals, and evaporating the mixture via differential distillation. The apparatus was a laboratory-scale vacuum evaporator operated at 60 ±5 torr absolute (vacuum evaporation). The LAW simulant represented the liquid expected to be retrieved from the Hanford tank farms at approximately 4.0 M [Na+] total sodium ion concentration. The concentration of the organic chemicals added was significantly higher than typically found in the tank waste samples since the higher levels were necessary to assist in analytical measurement and tracking of the spiked species.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Microbial Biomining for the Release and Recovery of Rare Earth Elements in Abandoned Coal Mine Drainage

Microbes can be used for biomining rare earth elements (REEs) from abandoned coal-mine drainage (AMD) solids. Domestically Pennsylvania has ~11,000 abandoned mines, with ~500 AMD passive remediation systems (PRSs) that precipitate REE rich solids. In passive systems, REEs, co-precipitate with manganese (Mn), accumulating as a valuable leachate when resolubilized. REEs like lanthanum (La) are used in battery technology. Microbial metabolism that co-resolubilize Mn and REEs could result in an affordable release process that does not require the addition of hazardous chemical additives. Microbial sequestering of La can be used for selective purification from a mixed REE composition. Currently, the microbial mechanisms that contribute to mass REE resolubilization and selective sequestration are poorly understood. We have isolated bacteria (Bacillus mycoides JR07 and Bacillus pseudomycoides KB7) that solubilize Mn oxide, La oxide, and AMD solids by acidogenesis. Preliminary results show methylotrophic bacterial isolate B3 can take up soluble La, which may have a potential application in the purification of La from a mixed REE leachate. Determining the microbial metabolism and genes involved in the REE resolubilization and selective biomining of La is crucial to optimize the biomining of AMD solids. Our work addresses the growing need to develop novel REE recovery methods from domestic sources.

microbiology↗
DOE OSTI2020

Ability of Particulate Matter Index to describe sooting tendency of various gasoline formulations in a stratified-charge spark-ignition engine

This study investigates the ability of Particulate Matter Index (PMI) to describe the sooting behavior of various gasoline formulations in a stratified-charge (SC) spark-ignition engine. Specifically, the engine was operated at 2000 rpm with an intake pressure of 130 kPa where soot formation is known to primarily occur in the bulk gases. Exhaust soot emissions were measured for nine test fuels at various exhaust gas recirculation levels. A comparison between measured soot levels and PMI shows that PMI is a relatively poor predictor of the sooting tendency of the tested fuels under lean SC combustion. Among the fuels, three fuels, namely the diisobutylene blend, High Olefin, and E30 fuels exhibit measured soot behavior opposite of that predicted by PMI. Optical diagnostics were utilized to further investigate the in-cylinder phenomena for these three fuels. Analysis of natural luminosity and diffused back-illumination extinction imaging suggests that fuel-induced differences in the amount of soot formed are responsible for a majority of the discrepancy in measured versus predicted sooting tendency. Fuel-induced differences in soot oxidation and spray development seem to play minor roles. Because the combustion and air-fuel mixing processes for lean SC combustion are different from conventional stoichiometric operation it is hypothesized that the PMI correlation needs to be modified to account for differences in stoichiometric air-fuel ratio and level of oxygenation between fuels. Furthermore, the role of fuel volatility in PMI possibly needs to be de-emphasized for SC operation with fuel injection into compression-heated gases.

42 ENGINEERING↗
DOE OSTI2026

Exploring sodium dynamics in the dilute oxygen regime of mixed oxy-sulfide NaPSiSO glasses

All-solid-state‑sodium batteries have great potential to lower the cost of grid-scale energy storage systems. However, they require a low cost, high conductivity solid electrolyte to become a reality. The electrochemical properties of mixed oxy-sulfide glasses NaPSiSO exceed those of either the pure sulfide or the pure oxide glass alone. In this work, we have tested models of sodium ion dynamics in the NaPSiSO series: zNa 2 S+(1-z)[(1-y)[(1-x)SiS 2 + xPS 5/2 ] + yNaPO 3 ] where 0.57 ≤ z ≤ 0.588, 0 ≤ x ≤ 0.35, and 0.15 ≤ y ≤ 0.35 using 23 Na nuclear magnetic resonance to directly probe the local fields and their fluctuations at the nuclear sites. We determined the distribution of activation energies in these materials arising from distributions of local environments and provided quantitative information about the connectivity of the ionic pathways through which the sodium ions move. We found that the sodium ion conduction dynamics were described as an ionic percolation through a Gaussian distribution of energy barriers and that the composition dependence of the ionic conductivity in the dilute oxygen regime is well-described by the Nernst-Einstein relation modified for percolation.

25 ENERGY STORAGE↗
DOE OSTI2023

Accurate prediction of oxygen vacancy concentration with disordered A-site cations in high-entropy perovskite oxides

Abstract Entropic stabilized ABO 3 perovskite oxides promise many applications, including the two-step solar thermochemical hydrogen (STCH) production. Using binary and quaternary A-site mixed {A}FeO 3 as a model system, we reveal that as more cation types, especially above four, are mixed on the A-site, the cell lattice becomes more cubic-like but the local Fe–O octahedrons are more distorted. By comparing four different Density Functional Theory-informed statistical models with experiments, we show that the oxygen vacancy formation energies ( $${E}_{V}^{f}$$ E V f ) distribution and the vacancy interactions must be considered to predict the oxygen non-stoichiometry ( δ ) accurately. For STCH applications, the $${E}_{V}^{f}$$ E V f distribution, including both the average and the spread, can be optimized jointly to improve Δ δ (difference of δ between the two-step conditions) in some hydrogen production levels. This model can be used to predict the range of water splitting that can be thermodynamically improved by mixing cations in {A}FeO 3 perovskites.

08 HYDROGEN↗
DOE OSTI2025

Supercritical water desalination and oxidation (SCWDO): Effectiveness on complex solutions, technoeconomic, and CO 2 impact for produced water treatment

The modern energy-economy is increasingly causing the production of highly saline brines, including from produced water. Supercritical water desalination can concentrate and extract minerals from these brines, but the effects of mixed salt interactions, organic degradation with additives, and the technology's economics are not well understood at supercritical condition. The present study evaluated and experimentally studied an integrated supercritical water desalination and oxidation (SCWDO) process for treating real-produced water samples from oil/natural gas field. The complex interactions between the various anions and cations in produced water were extensively evaluated. Most of the divalent and trivalent ions were extracted below 250 °C while the majority of the monovalent salt were removed between 380 to 410 °C. The treated real produced water was of drinking water quality, with <500 mg/l of total dissolved solid (TDS) and with 100% organics removal. Furthermore, the heat liberated during the organic oxidation could be utilized internally and for electricity generation for enhanced the energy efficiency and lower cost of produced water treatment. With system optimization, the proposed SCWDO process can essentially be made a net zero energy process. A novel process flow diagram for the commercial scale self-powered hybrid SCWDO technology was proposed as a cost-effective produced water treatment to mitigate the environmental crises. Techno-economic analysis showed that produced water treatment cost with SCWDO can be reduced to 2–3 $/m 3 and can be up to 60 % cheaper to traditional deep well reinjection. Additionally, the proposed SCWDO process could achieve net negative CO 2 emission.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Predicting the potential for mineral scale precipitation in unconventional reservoirs due to fluid-rock and fluid mixing geochemical reactions

Mineral precipitation within hydraulically fractured shale may affect fluid flow pathways and impact longterm hydrocarbon production. The ability to predict geochemical reactions that lead to problematic mineral precipitation will lead to active reservoir management strategies to improve overall production. Using the Marcellus Shale as a case study, a combination of laboratory experiments and reaction path modeling was applied to determine which reactions are likely to occur upon introduction of hydraulic fracturing fluid into the shale reservoir. Experimental results indicate that contact between fracturing fluid and shale will result in dissolution of primary minerals (quartz, feldspars, kaolinite, chlorite, pyrite) and secondary mineral precipitation over time periods of less than one week. Precipitation of barite, Fe-oxides, feldspars, amorphous silica and clay is likely to occur within the reservoir during shut in and early flowback due to mixing between fracturing fluid and reservoir brine as based on modeling saturation indices using experimental fluid data. Reaction path modeling of the experimental scenarios corroborates the specific dissolution and precipitation reactions observed experimentally. Comparison of the results to injected and produced waters from a Marcellus Shale well pad in Greene County, PA, USA, shows that the mineral reactions occur during the hydraulic fracturing, shut in, and early flowback periods. The results presented in this paper demonstrate the value in applying experimental approaches to identify mineral precipitation/dissolution reactions that may significantly impact reservoir performance. The good agreement between geochemical models and experimental results provides confidence that numerical models can be applied to screen the potential fluid-mineral and fluid-mixing reactions in unconventional reservoirs that result in undesired mineral scale precipitation.

58 GEOSCIENCES↗
DOE OSTI2025

Tracking oxygen vacancy migration in memristor devices using operando hard X-ray photoelectron spectroscopy

Fabrication of ultrathin (sub-2 nm) oxide semiconductor memristors poses the fundamental challenge of achieving oxide growth with atomic precision in terms of electronic structure and defect formation. Recently, ultrathin memristors consisting of bilayers of mixed Al 2 O 3 and MgO atomic layers were fabricated using an in vacuo atomic layer deposition process. This approach offers a unique platform for precise atomic control of oxygen vacancies in the device in which the vacancies are introduced by placing MgO atomic layers between pristine Al 2 O 3 layers. In this work, we present a systematic operando Hard X-ray PhotoElectron Spectroscopy (HAXPES) study of the switching of such memristors, combined with complementary current-voltage and capacitance-voltage (C-V) measurements. We used a memristor stack of Al 2 O 3 /MgO atomic layers, with the MgO-containing oxide deposited on the bottom Al metal electrode and a pure Al 2 O 3 layer below the top Pd electrode. HAXPES analysis shows a substantial change in the chemical shift of the Aluminum oxide when switching between the ”OFF” and ”ON” states indicative of a redistribution of oxygen vacancies in the device active layer. Interestingly, subsequent switching to the OFF state shows hysteretic behavior indicating the retention of some oxygen vacancies in the top Al 2 O 3 layer. This vacancy retention can be correlated with the stochastic behavior of the switching voltage observed in these devices. C–V measurements show a clear frequency-dependent response in the OFF state, consistent with enhanced polarization and vacancy trapping at low frequencies.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Crystal structure and magnetism of actinide oxides: a review

In actinide systems, the 5f electrons experience a uniquely delicate balance of effects and interactions having similar energy scales, which are often difficult to properly disentangle. This interplay of factors such as the dual nature of 5f-states, strong electronic correlations, and strong spin–orbit coupling results in electronically unusual and intriguing behavior such as multi-k antiferromagnetic ordering, multipolar ordering, Mott-physics, mixed valence configurations, and more. Despite the inherent allure of their exotic properties, the exploratory science of even the more basic, binary systems like the actinide oxides has been limited due to their toxicity, radioactivity, and reactivity. In this article, we provide an overview of the available synthesis techniques for selected binary actinide oxides, including the actinide dioxides, sesquioxides, and a selection of higher oxides. For these oxides, here we also review and evaluate the current state of knowledge of their crystal structures and magnetic properties. In many aspects, substantial knowledge gaps exist in the current body of research on actinide oxides related to understanding their electronic ground states. Bridging these gaps is vital for improving not only a fundamental understanding of these systems but also of future nuclear technologies. To this end, we note the experimental techniques and necessary future investigations which may aid in better elucidating the nature of these fascinating systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Microwave-driven synthesis and modification of nanocarbons and hybrids in liquid and solid phases

Over the past 20 years, nanocarbons have become more significant as nanostructured fillers in composites and, more recently, as functional elements in a brand-new class of hybrid materials. Microwave-assisted synthesis and processing is a burgeoning subject matter in materials research with significant strides in the realm of nanocarbon during the last decade. Here, the review examines recent approaches to producing various nanocarbons using microwaves as energy sources, the characterization of such materials for various applications, and their results. The underlying factors supporting the increased performance of such materials or their composites are analyzed and reaction mechanisms are presented wherever necessary. In particular, the recently developed and verified approaches to produce porous carbon materials, CNTs and fibers, carbon nanospheres, carbon dots, CQDs, reduced graphene oxide, nanocarbon hybrid materials, and the purification and modification of CNTs are discussed. The reduction of graphene oxide and the preparation of graphene derivative hybrids using solid-state and liquid-state routes such as polyopl, mixed solvents, ionic liquids, and microwave-assisted hydrothermal/solvothermal methods are analyzed in detail. In addition, the principles of microwave heating in liquid and solid states, the use of metals particles as arcing agents or catalysts, and carbonaceous materials as internal or external susceptors during synthesis and modifications are presented in detail.

25 ENERGY STORAGE↗
DOE OSTI2024

Mercury Testing with Sludge Batch 10 Tank 40 Simulant

Savannah River Mission Completion (SRMC) requested that researchers at Savannah River National Laboratory (SRNL) perform testing designed to examine why the Defense Waste Processing Facility (DWPF) is not collecting elemental mercury in the Mercury Water Wash Tank (MWWT). In order for DWPF to recover mercury, mercuric oxide must first be reduced to elemental mercury. The elemental mercury must then be steam stripped, condense, and coalesce in the Mercury Water Wash Tank (MWWT) during chemical processing in the Sludge Receipt and Adjustment Tank (SRAT). The efficiency of these steps was investigated in a series of laboratory scale SRAT experiments under the nitric-glycolic and nitric-formic flowsheets utilizing Momentive Y-17112 and Antifoam 747. Mercury speciation in the Slurry Mix Evaporator Condensate Tank (SMECT) and condensate streams was also examined. The key conclusions from these experiments are as follows: Mercury II Oxide may not be fully reduced to elemental mercury during acid addition at 93°C. Higher temperatures, i.e., boiling may be necessary to fully reduce Mercury II Oxide. The highest percent mercury recovery (71 %) in the MWWT was observed in the MS-NGA-17112 experiment (nitric-glycolic acid flowsheet with Momentive Y-17112), which is how DWPF is currently operating the SRAT.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

A high-temperature mixed potential CO gas sensor for in situ combustion control

An in situ, accurate and robust sensor that can sustain a high temperature of above 1000 °C is needed for on-site combustion monitoring because it can give real-time and local data to the control system to adjust the overall combustion efficiency. In this work, we find that nickel oxide (NiO) is a promising sensing material for CO which is a direct indicator of the status of the combustion process of a power plant. Under the conditions of 0.5–3% O 2 and 1000 °C, the fabricated yttrium-stabilized zirconia (YSZ)-based mixed potential sensor using porous NiO demonstrates good sensitivity to CO, showing a signal as high as 36 mV to 1000 ppm CO. The effects of gas transport, structure and geometry of the NiO electrode on the sensing performance are studied. Results show that fast gas transport is much beneficial to improved sensitivity. NiO having a porous structure is much more sensitive to CO than that having a dense structure. But the t90 (time to achieve 90% final signal magnitude) of the former is much longer due to slower gas diffusion inside the pores. It's worth noting that the NiO sensor exhibits a positive relationship with the CO content, opposite to other reported results of mixed potential sensors to detect CO. We find that this might be due to the electrochemical reduction, instead of oxidation of CO during the interaction with NiO at 1000 °C. Selectivity tests on how CO 2 , CH 4 and steam affect CO sensing are also demonstrated. NiO is insensitive to even 10% CO 2 . CH 4 does not shift the average value of the CO sensing response. However, it makes the sensing signal fluctuate more intensively. 2% steam exerts a great influence on NiO sensitivity to CO: it magnifies the sensitivity of the porous NiO electrode to a low CO range of 0–100 ppm, but inhibits its sensitivity to a CO range of 100 ppm to 1000 ppm. Lastly, an 11 day stability test demonstrates the promising stability property of the proposed NiO-based YSZ sensor.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2025

In Situ Electrochemistry of Buried Interfaces in Metal Halide Perovskites: Probing Energy Bands, Halide Redox Activity, and Kinetics

Control over charge injection and extraction processes across buried interfaces is fundamental for all (opto)electronic multilayer device platforms, necessitating detailed understanding of local structural and chemical differences that promote defect formation, distort energetic band-edge alignments, and alter charge transport processes. Herein, the implementation of a low-cost electroanalytical methodologies’ tool suite is described to quantitatively characterize buried interfaces and redox reactions in printable, mixed electrical–ionic, and redox-active metal halide perovskites and a prototypical hole-transporting nickel oxide (NiO x ) thin film. The objective is to demonstrate the power of electrochemical methodologies to improve the nanoscale understanding of complex interfaces within optoelectronic devices by providing case studies on how to: i) differentiate between electronic and chemical properties in NiO x contacts; ii) measure changes in reversibility of halide redox reactions via NiO x surface states; iii) assess energy alignment and charge transport across (modified) buried interfaces; and iv) quantify defects at buried interfaces that change with modifiers and differences in perovskite processing, including increasing defect concentrations when films are slot-die-coated versus spin-cast. The collective approach addresses major challenges in understanding the precise energy landscape and interface reactivity under relevant electric fields that mimic operando conditions (away from equilibrium) and across length scales in thin film device formats.

(spectro)electrochemistry↗
DOE OSTI2022

Assessing the Impact of Lightning NOx Emissions in CMAQ Using Lightning Flash Data from WWLLN over the Contiguous United States

Comparison of lightning flash data from the National Lightning Detection Network (NLDN) and from the World Wide Lightning Location Network (WWLLN) over the contiguous United States (CONUS) for the 2016–2018 period reveals temporally and spatially varying flash rates that would influence lightning NO x (LNO x ) production due to known detection efficiency differences especially during summer months over land (versus over ocean). However, the lightning flash density differences between the two networks show persistent seasonal patterns over geographical regions (e.g., land versus ocean). Since the NLDN data are considered to have higher accuracy (lightning detection with >95% efficiency), we developed scaling factors for the WWLLN flash data based on the ratios of WWLLN to NLDN flash data over time (months of year) and space. In this study, sensitivity simulations using the Community Multiscale Air Quality (CMAQ) model are performed utilizing the original data sets (both NLDN and WWLLN) and the scaled WWLLN flash data for LNO x production over the CONUS. The model performance of using the different lightning flash datasets for ambient O 3 and NO x mixing ratios that are directly impacted by LNO x emissions and the wet and dry deposition of oxidized nitrogen species that are indirectly impacted by LNO x emissions is assessed based on comparisons with ground-based observations, vertical profile measurements, and satellite products. During summer months, the original WWLLN data produced less LNO x emissions (due to its lower lightning detection efficiency) compared to the NLDN data, which resulted in less improvement in model performance than the simulation using NLDN data as compared to the simulation without any LNO x emissions. However, the scaled WWLLN data produced LNO x estimates and model performance comparable with the NLDN data, suggesting that scaled WWLLN may be used as a substitute for the NLDN data to provide LNO x estimates in air quality models when the NLDN data are not available (e.g., due to prohibitive cost or lack of spatial coverage).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Calorimetric Study of Mixed Phosphates Na 4 M 3 (PO 4 ) 2 P 2 O 7 (M = Mn 2+ , Fe 2+ , Co 2+ , Ni 2+ ) to Evaluate the Electrochemical Trends

Mixed polyanionic compounds have been studied extensively as viable cathode materials for sodium-ion batteries. Mixed phosphates, Na 4 M 3 (PO 4 ) 2 P 2 O 7 (M = Mn 2+ , Fe 2+ , Co 2+ , Ni 2+ ), provide a low barrier for Na-ion diffusion, being advantageous in comparison to phosphates and pyrophosphates. The reported order of sodium extraction is ambiguous and remains unclear. Despite being structurally similar, electrochemical performance differs for all four analogues with different degrees of (de)sodiation, according to the transition element present. High-temperature oxide melt solution calorimetry has been used to establish the relation between thermodynamic phase stability and observed capacity for this series of mixed phosphates. Thermodynamic phase stability largely depends on the kind of structure, type of bonding, and size of the cations present. So, according to our results, the thermodynamic phase stability follows the order Na 4 Mn 3 (PO 4 ) 2 P 2 O 7 > Na 4 Fe 3 (PO 4 ) 2 P 2 O 7 > Na 4 Co 3 (PO 4 ) 2 P 2 O 7 > Na 4 Ni 3 (PO 4 ) 2 P 2 O 7 . The thermodynamic studies serve as guidelines for the selection of compositions with the potential for fabricating advanced cathode materials with maximum performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗