Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model Coupling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Coupled continuum and network model framework to study catalyst layers of polymer electrolyte fuel cells

The nanostructured thin film (NSTF) catalyst layers which have demonstrated high power densities, mass activities, and exceptional metal and support stability can have limited operational robustness due to their thin thickness and the hydrophilicity of the metal-coated nano whiskers. The dispersed nanostructured thin film (dNSTF) catalyst layers have been developed by dispersing the NSTF Pt whiskers with ionomer and carbon support to increase the thickness and hydrophobicity. Continuum and network models (NM) are coupled through boundary conditions to study the polymer electrolyte fuel cell with a dNSTF cathode catalyst layer. The coupled model combines the computational efficiency of the continuum model with the pore-scale information in the dNSTF cathode catalyst layer of the NM. It captures the special morphology of the partially ionomer/water covered cylindrical whiskers, as well as water percolation through the pore structures and their impact on the cell performance. Here we observe optimal ionomer coverage on whiskers to be 0.5, ionomer to carbon ratio to be 0.9 and higher whisker to carbon ratios to be desired.

08 HYDROGEN↗
DOE OSTI2023

Efficient Reliability Analysis using Generalized Multifidelity Modeling and Explainable Active Learning

To assess the reliability of critical technologies like nuclear plants and infrastructure systems and improve the robustness of design, engineers have to quantify the uncertainties surrounding the system behavior accurately. However, the complexity of the problem can make standard reliability analysis algorithms prohibitively expensive, primarily due to the high computational cost of estimating the system response at each iteration. This cost can be greatly reduced by using multi-fidelity modeling and machine learning to build a surrogate model to replace the expensive response function. We propose a general and robust method for building surrogates from multiple Low Fidelity (LF) models coupled with machine learning to retain accuracy. Our framework first constructs “Corrected Low Fidelity models” (CLFs) by coupling a High Fidelity (HF) model inferred Gaussian Process correction term with each of the LF models. It then uses the correction terms to assign model probabilities to each of these CLFs in an explainable way before using them to assemble the final surrogate. No assumptions are made about the type of the LF models or their correlation with the HF model. The proposed surrogate modeling framework is used within the subset simulation algorithm (a variance-reduced MCMC-based reliability analysis algorithm) for enhanced efficiency. Additionally, an active learning step is added to the algorithm to adaptively decide when the surrogate is not sufficiently accurate, at which point the HF model is called and used to refine the surrogate. Through a frame buckling example, our method is shown to be highly efficient at reducing the expensive HF model calls while accurately estimating the failure probability.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2016

Uncertainty in future projections of the North Pacific subtropical high and its implication for California winter precipitation change: FUTURE CALIFORNIA PRECIPITATION

This study examines future projections of sea level pressure change in the North Pacific and its impact on winter precipitation changes in California. The multi-model analysis, based on the Coupled Model Inter-comparison Project phase 5 (CMIP5) models under the Representative Concentration Pathway 8.5 (RCP8.5) scenario, shows a robust sea-level pressure change in the late 21st century over the western North Pacific in which both the Aleutian Low and North Pacific Subtropical High (NPSH) shift poleward in concert with a widening of the Hadley Cell. This change is partly explained by a systematic increase of static stability in the subtropics. However, over the eastern North Pacific, the projected NPSH changes exhibit a substantial inter-model spread, resulting in uncertain projections of precipitation changes in California. This inter-model spread in the eastern North Pacific is associated with a Pacific Decadal Oscillation-like surface temperature change in the western North Pacific and the resulting meridional temperature gradient change. This study points to a major source of uncertainty for the response of winter precipitation to global warming over the West Coast of North America: atmosphere-ocean coupling in the North Pacific.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2016

Recommendations for diagnosing effective radiative forcing from climate models for CMIP6

The usefulness of previous Coupled Model Intercomparison Project (CMIP) exercises has been hampered by a lack of radiative forcing information. This has made it difficult to understand reasons for differences between model responses. Effective radiative forcing (ERF) is easier to diagnose than traditional radiative forcing in global climate models (GCMs) and is more representative of the eventual temperature response. Here we examine the different methods of computing ERF in two GCMs. We find that ERF computed from a fixed sea surface temperature (SST) method (ERF_fSST) has much more certainty than regression based methods. Thirty year integrations are sufficient to reduce the 5–95% confidence interval in global ERF_fSST to 0.1Wm ~2 . For 2xCO2 ERF, 30 year integrations are needed to ensure that the signal is larger than the local confidence interval over more than 90% of the globe. Within the ERF_fSST method there are various options for prescribing SSTs and sea ice. We explore these and find that ERF is only weakly dependent on the methodological choices. Prescribing the monthly averaged seasonally varying model’s preindustrial climatology is recommended for its smaller random error and easier implementation. As part of CMIP6, the Radiative Forcing Model Intercomparison Project (RFMIP) asks models to conduct 30 year ERF_fSST experiments using the model’s own preindustrial climatology of SST and sea ice. The Aerosol and Chemistry Model Intercomparison Project (AerChemMIP) will also mainly use this approach. Lastly, we propose this as a standard method for diagnosing ERF and recommend that it be used across the climate modeling community to aid future comparisons.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Larger Cloud Liquid Water Enhances Both Aerosol Indirect Forcing and Cloud Radiative Feedback in Two Earth System Models

Previous studies have noticed that the Coupled Model Intercomparison Project Phase 6 (CMIP6) models with a stronger cooling from aerosol-cloud interactions (ACI) also have an enhanced warming from positive cloud feedback, and these two opposing effects are counter-balanced in simulations of the historical period. However, reasons for this anti-correlation are less explored. In this study, we perturb the cloud ice microphysical processes to obtain cloud liquid of varying amounts in two Earth System Models (ESMs). We find that the model simulations with a larger liquid water path (LWP) tend to have a stronger cooling from ACI and a stronger positive cloud feedback. More liquid clouds in the mean-state present more opportunities for anthropogenic aerosol perturbations and also weaken the negative cloud feedback at middle to high latitudes. This work, from a cloud state perspective, emphasizes the influence of the mean-state LWP on effective radiative forcing due to ACI (ERF ACI ).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

The Role of Tropical Cyclone—Ocean Interactions in Future Changes in Hurricane Katrina

Tropical cyclone (TC) intensity and precipitation are projected to increase in the future. However, some projections are based on atmosphere‐only models in which sea surface temperatures are prescribed, whereas projections based on global atmosphere‐ocean coupled models can be subject to long‐term ocean biases. We investigated the role of TC‐ocean interactions in future changes in TC intensity and precipitation in Hurricane Katrina. We performed four‐member ensembles using convection‐permitting atmosphere‐only and atmosphere‐ocean regional models for the historical climate and four future climates. We found that although future TC intensity and precipitation increased regardless of ocean coupling, ocean coupling dampened the future minimum sea‐level pressure decrease by half and amplified future precipitation scaling. Compared to future changes in upper‐ocean temperature, changes in salinity contributed little to future changes in TC intensity. This study highlights the importance of considering TC‐ocean interactions to reduce uncertainty in the magnitude of future TC intensity and precipitation projections.

climate change↗
DOE OSTI2018

Sensitivity of Surface Temperature to Oceanic Forcing via q -Flux Green’s Function Experiments. Part I: Linear Response Function

This paper explores the use of the linear response function (LRF) to relate the mean sea surface temperature (SST) response to prescribed ocean heat convergence ( q flux) forcings. Two methods for constructing the LRF based on the fluctuation–dissipation theorem (FDT) and Green’s function (GRF) are examined. A 900-yr preindustrial simulation by the Community Earth System Model coupled with a slab ocean model (CESM–SOM) is used to estimate the LRF using FDT. For GRF, 106 pairs of CESM–SOM simulations with warm and cold q-flux patches are performed. FDT is found to have some skill in estimating the SST response to a q-flux forcing when the local SST response is strong, but it fails in inverse estimation of the q-flux forcing for a given SST pattern. In contrast, GRF is shown to be reasonably accurate in estimating both SST response and q-flux forcing. Possible degradation in FDT may be attributed to insufficient data sampling, significant departure of the SST distribution from Gaussianity, and the nonnormality of the constructed operator. The GRF-based LRF is then used to (i) generate a global surface temperature sensitivity map that shows the q-flux forcing in higher latitudes to be 3–4 times more effective than low latitudes in producing global surface warming, and (ii) identify the most excitable SST mode (neutral vector) that shows marked resemblance to the interdecadal Pacific oscillation (IPO). The latter discovery suggests that the IPO-like fluctuation exists in the absence of the coupling to the ocean dynamics. Coupling to the ocean dynamics in CESM, on the other hand, only enhances the spectral power of the IPO at interannual time scales.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Evaluation of precipitation indices in suites of dynamically and statistically downscaled regional climate models over Florida

Abstract The present work evaluates historical precipitation and its indices defined by the Expert Team on Climate Change Detection and Indices (ETCCDI) in suites of dynamically and statistically downscaled regional climate models (RCMs) against NOAA’s Global Historical Climatology Network Daily (GHCN-Daily) dataset over Florida. The models examined here are: (1) nested RCMs involved in the North American CORDEX (NA-CORDEX) program, (2) variable resolution Community Earth System Models (VR-CESM), (3) Coupled Model Intercomparison Project phase 5 (CMIP5) models statistically downscaled using localized constructed analogs (LOCA) technique. To quantify observational uncertainty, three in situ-based (PRISM, Livneh, CPC) and three reanalysis (ERA5, MERRA2, NARR) datasets are also evaluated against the station data. The reanalyses and dynamically downscaled RCMs generally underestimate the magnitude of the monthly precipitation and the frequency of the extreme rainfall in summer. The models forced with CanESM2 miss the phase of the seasonality of extreme precipitation. All models and reanalyses severely underestimate both the mean and interannual variability of mean wet-day precipitation (SDII), consecutive dry days (CDD), and overestimate consecutive wet days (CWD). Metric analysis suggests large uncertainty across NA-CORDEX models. Both the LOCA and VR-CESM models perform better than the majority of models. Overall, RegCM4 and WRF models perform poorer than the median model performance. The performance uncertainty across models is comparable to that in the reanalyses. Specifically, NARR performs poorer than the median model performance in simulating the mean indices and MERRA2 performs worse than the majority of models in capturing the interannual variability of the indices.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

A Mathematical Model for the Multiphase Transport and Reaction Kinetics in a Ladle with Bottom Powder Injection

A computation fluid dynamics-population balance model-simultaneous reaction model (CFD-PBM-SRM) coupled model has been proposed to study the multiphase flow behavior and refining reaction kinetics in a ladle with bottom powder injection, and some new and important phenomena and mechanisms are presented. For the multiphase flow behavior, the effects of bubbly plume flow, powder particle motion, particle-particle collision and growth, particle-bubble collision and adhesion, and powder particle removal into top slag are considered. For the reaction kinetics, the mechanisms of multicomponent simultaneous reactions, including Al, S, Si, Mn, Fe, and O, at the multi-interface, including top slag-liquid steel interface, air-liquid steel interface, powder droplet-liquid steel interface, and bubble-liquid steel interface, are presented, and the effect of sulfur solubility in the powder droplet on the desulfurization is also taken into account. Model validation is carried out using hot tests in a 2-t induction furnace with bottom powder injection. The result shows that the powder particles gradually disperse in the entire furnace; in the vicinity of the bottom slot plugs, the desulfurization product CaS is liquid phase, while in the upper region of the furnace, the desulfurization product CaS is solid phase. The predicted sulfur contents by the present model agree well with the measured data in the 2-t furnace with bottom powder injection.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Mechanism of Macrosegregation Formation in Continuous Casting Slab: A Numerical Simulation Study

Solidified shell bulging is supposed to be the main reason for slab center segregation, while the influence of thermal shrinkage rarely has been considered. In this article, a thermal shrinkage model coupled with the multiphase solidification model is developed to investigate the effect of the thermal shrinkage, solidification shrinkage, grain sedimentation, and thermal flow on solute transport in the continuous casting slab. In this model, the initial equiaxed grains contract freely with the temperature decrease, while the coherent equiaxed grains and columnar phase move directionally toward the slab surface. The results demonstrate that the center positive segregation accompanied by negative segregation in the periphery zone is mainly caused by thermal shrinkage. During the solidification process, liquid phase first transports toward the slab surface to compensate for thermal shrinkage, which is similar to the case considering solidification shrinkage, and then it moves opposite to the slab center near the solidification end. It is attributed to the sharp decrease of center temperature and the intensive contract of solid phase, which cause the enriched liquid to be squeezed out. With the effect of grain sedimentation and thermal flow, the negative segregation at the external arc side (zone A1) and the positive segregation near the columnar-to-equiaxed transition at the inner arc side (position B1) come into being. Besides, it is found that the grain sedimentation and thermal flow only influence solute transport before equiaxed grains impinge with each other, while the solidification and thermal shrinkage still affect solute redistribution in the later stage.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Climate Change Projection in the Twenty-First Century Simulated by NIMS-KMA CMIP6 Model Based on New GHGs Concentration Pathways

Abstract The National Institute of Meteorological Sciences-Korea Meteorological Administration (NIMS-KMA) has participated in the Coupled Model Inter-comparison Project (CMIP) and provided long-term simulations using the coupled climate model. The NIMS-KMA produces new future projections using the ensemble mean of KMA Advanced Community Earth system model (K-ACE) and UK Earth System Model version1 (UKESM1) simulations to provide scientific information of future climate changes. In this study, we analyze four experiments those conducted following the new shared socioeconomic pathway (SSP) based scenarios to examine projected climate change in the twenty-first century. Present day (PD) simulations show high performance skill in both climate mean and variability, which provide a reliability of the climate models and reduces the uncertainty in response to future forcing. In future projections, global temperature increases from 1.92 °C to 5.20 °C relative to the PD level (1995–2014). Global mean precipitation increases from 5.1% to 10.1% and sea ice extent decreases from 19% to 62% in the Arctic and from 18% to 54% in the Antarctic. In addition, climate changes are accelerating toward the late twenty-first century. Our CMIP6 simulations are released to the public through the Earth System Grid Federation (ESGF) international data sharing portal and are used to support the establishment of the national adaptation plan for climate change in South Korea.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Swelling and permeability effects during propellant cookoff

Large rocket motors may violently explode when exposed to accidental fires. Even hot metal fragments from a nearby accident may penetrate the propellant and ultimately cause thermal ignition. A mechanistic understanding of heated propellants leading to thermal runaway is a major unsolved problem. Here we show that thermal ignition in propellants can be predicted using a universal cookoff model coupled to a micromechanics pressurization model. Our model predicts the time to thermal ignition in cookoff experiments with variable headspace volumes. Furthermore, we found that experiments with headspace volumes are more prone to deformation which distorts pores and causes increased permeability when the propellant expands into this headspace. Delayed ignition with larger headspace volume correlates with lower headspace pressures during decomposition. We found that our predictions matched experimental measurements best when the initial propellant was impermeable to gas flow rather than being permeable. Similar behavior is expected with other energetic materials with rubbery binders. Our model is validated using data from a separate laboratory. We also present an uncertainty analysis using Latin Hypercube Sampling (LHS) of thermal ignition caused by a steel fragment embedded in the propellant.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

Modeling the Sources and Transport Processes During Extreme Ammonia Episodes in the U.S. Corn Belt

Abstract Atmospheric ammonia (NH 3 ) is the primary form of reactive nitrogen (N r ) and a precursor of ammonium (NH 4 + ) aerosols. Ammonia has been linked to adverse impacts on human health, the loss of ecosystem biodiversity, and plays a key role in aerosol radiative forcing. The midwestern United States is the major NH 3 source in North America because of dense livestock operations and the high use of synthetic nitrogen fertilizers. Here, we combine tall‐tower (100 m) observations in Minnesota and Weather Research and Forecasting model coupled with Chemistry (WRF‐Chem) modeling to investigate high and low NH 3 emission episodes within the U.S. Corn Belt to improve our understanding of the distribution of emission sources and transport processes. We examined observations and performed model simulations for cases in February through November of 2017 and 2018. The results showed the following: (1) Peak emissions in November 2017 were enhanced by above‐normal air temperatures, implying a Q 10 (i.e., the change in NH 3 emissions for a temperature increase of 10°C) of 2.5 for emissions. (2) The intensive livestock emissions rom northern Iowa, approximately 400 km away from the tall tower, accounted for 17.6% of the abundance in tall‐tower NH 3 mixing ratios. (3) Ammonia mixing ratios in the innermost domain 3 frequently (i.e., 336 hr, 48% of November 2017) exceeded 5.3 ppb, an important air quality health standard. (4) In November 2017, simulated NH 3 net ecosystem exchange (the difference between NH 3 emissions and dry deposition) accounted for 60–65% of gross NH 3 emissions for agricultural areas and was 2.8–3.1 times the emissions of forested areas. (5) We estimated a mean annual NH 3 net ecosystem exchange of 1.60 ± 0.06 nmol · m −2 · s −1 for agricultural lands and −0.07 ± 0.02 nmol · m −2 · s −1 for forested lands. These results imply that future warmer fall temperatures will enhance agricultural NH 3 emissions, increase the frequency of dangerous NH 3 episodes, and enhance dry NH 3 deposition in adjacent forested lands.

Hu, Cheng↗
DOE OSTI2019

Mathematical Reconstruction of Land Carbon Models From Their Numerical Output: Computing Soil Radiocarbon From C Dynamics

Radiocarbon ( 14 C) is a powerful tracer of the global carbon cycle that is commonly used to assess carbon cycling rates in various Earth system reservoirs and as a benchmark to assess model performance. Therefore, it has been recommended that Earth System Models (ESMs) participating in the Coupled Model Intercomparison Project Phase 6 report predicted radiocarbon values for relevant carbon pools. However, a detailed representation of radiocarbon dynamics may be an impractical burden on model developers. Here, we present an alternative approach to compute radiocarbon values from the numerical output of an ESM that does not explicitly represent these dynamics. The approach requires computed 12 C stocks and fluxes among all carbon pools for a particular simulation of the model. From this output, a time-dependent linear compartmental system is computed with its respective state-transition matrix. Using transient atmospheric 14 C values as inputs, the state-transition matrix is then applied to compute radiocarbon values for each pool, the average value for the entire system, and component fluxes. We demonstrate the approach with ELMv1-ECA, the land component of an ESM model that explicitly represents 12 C, and 14 C in 7 soil pools and 10 vertical layers. Results from our proposed method are highly accurate (relative error <0.01%) compared with the ELMv1-ECA 12 C and 14 C predictions, demonstrating the potential to use this approach in CMIP6 and other model simulations that do not explicitly represent 14 C.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

The DOE E3SM Model Version 2: Overview of the Physical Model and Initial Model Evaluation

Abstract This work documents version two of the Department of Energy's Energy Exascale Earth System Model (E3SM). E3SMv2 is a significant evolution from its predecessor E3SMv1, resulting in a model that is nearly twice as fast and with a simulated climate that is improved in many metrics. We describe the physical climate model in its lower horizontal resolution configuration consisting of 110 km atmosphere, 165 km land, 0.5° river routing model, and an ocean and sea ice with mesh spacing varying between 60 km in the mid‐latitudes and 30 km at the equator and poles. The model performance is evaluated with Coupled Model Intercomparison Project Phase 6 Diagnosis, Evaluation, and Characterization of Klima simulations augmented with historical simulations as well as simulations to evaluate impacts of different forcing agents. The simulated climate has many realistic features of the climate system, with notable improvements in clouds and precipitation compared to E3SMv1. E3SMv1 suffered from an excessively high equilibrium climate sensitivity (ECS) of 5.3 K. In E3SMv2, ECS is reduced to 4.0 K which is now within the plausible range based on a recent World Climate Research Program assessment. However, a number of important biases remain including a weak Atlantic Meridional Overturning Circulation, deficiencies in the characteristics and spectral distribution of tropical atmospheric variability, and a significant underestimation of the observed warming in the second half of the historical period. An analysis of single‐forcing simulations indicates that correcting the historical temperature bias would require a substantial reduction in the magnitude of the aerosol‐related forcing.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Weakening temperature control on the interannual variations of spring carbon uptake across northern lands

Ongoing spring warming allows the growing season to begin earlier, enhancing carbon uptake in northern ecosystems. We use 34 years of atmospheric CO 2 concentration measurements at Barrow, Alaska (BRW, 71° N) to show that the interannual relationship between spring temperature and carbon uptake has recently shifted. Here, we use two indicators: the spring zero-crossing date of atmospheric CO 2 (SZC) and the magnitude of CO 2 drawdown between May and June (SCC). The previously reported strong correlation between SZC, SCC and spring land temperature (ST) was found in the first 17 years of measurements, but disappeared in the last 17 years. As a result, the sensitivity of both SZC and SCC to warming decreased. Simulations with an atmospheric transport model coupled to a terrestrial ecosystem model suggest that the weakened interannual correlation of SZC and SCC with ST in the last 17 years is attributable to the declining temperature response of spring net primary productivity (NPP) rather than to changes in heterotrophic respiration or in atmospheric transport patterns. Reduced chilling during dormancy and emerging light limitation are possible mechanisms that may have contributed to the loss of NPP response to ST. These results thus challenge the ‘warmer spring–bigger sink’ mechanism.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Increased drought and extreme events over continental United States under high emissions scenario

The frequency, severity, and extent of climate extremes in future will have an impact on human well-being, ecosystems, and the effectiveness of emissions mitigation and carbon sequestration strategies. The specific objectives of this study were to downscale climate data for US weather stations and analyze future trends in meteorological drought and temperature extremes over continental United States (CONUS). We used data from 4161 weather stations across the CONUS to downscale future precipitation projections from three Earth System Models (ESMs) participating in the Coupled Model Intercomparison Project Phase Six (CMIP6), specifically for the high emission scenario SSP5 8.5. Comparing historic observations with climate model projections revealed a significant bias in total annual precipitation days and total precipitation amounts. The average number of annual precipitation days across CONUS was projected to be 205 ± 26, 184 ± 33, and 181 ± 25 days in the BCC, CanESM, and UKESM models, respectively, compared to 91 ± 24 days in the observed data. Analyzing the duration of drought periods in different ecoregions of CONUS showed an increase in the number of drought months in the future (2023–2052) compared to the historical period (1989–2018). The analysis of precipitation and temperature changes in various ecoregions of CONUS revealed an increased frequency of droughts in the future, along with longer durations of warm spells. Eastern temperate forests and the Great Plains, which encompass the majority of CONUS agricultural lands, are projected to experience higher drought counts in the future. Drought projections show an increasing trend in future drought occurrences due to rising temperatures and changes in precipitation patterns. Our high-resolution climate projections can inform policy makers about the hotspots and their anticipated future trajectories.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Interannual fires as a source for subarctic summer decadal climate variability mediated by permafrost thawing

Climate model simulations run under the Coupled Model Intercomparison Project Phase 6 (CMIP6) use an inhomogeneous biomass burning aerosol (BBA) emission dataset, which exhibits pronounced interannual variability from 1997–2014 due to the infusion of satellite data. Using the Community Earth System Model version 2 Large Ensemble (CESM2-LE) with original and smoothed CMIP6 BBA forcings, we show that the CMIP6 data inhomogeneity causes spurious decadal subarctic land warming. During years with reduced aerosol concentrations, increased solar radiation can trigger abrupt subarctic permafrost thawing, increased soil water drainage, upper soil drying, and subsequent surface warming. This slow process, which is further amplified by nonlinear cloud-aerosol interactions, cannot be completely offset during years of increased aerosol fluxes, thereby reddening surface temperature spectra in response to large-amplitude interannual aerosol forcing. More generally, our CESM2 experiments identify a pathway for generating decadal variability in high latitudes, involving interannual shortwave forcing and slow nonlinear soil responses.

54 ENVIRONMENTAL SCIENCES↗