Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model discrepancy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Solar models with enhanced energy transport in the core

The discrepancy between the observed and computed flux of solar neutrinos can be eliminated if the temperature gradient in the core of the model, and hence its central temperature, is reduced. This could in principle be accomplished by reducing the core opacity; alternatively, it has been proposed that a fraction of the energy transport in the solar core results from the motion of hypothetical particles (the so-called WIMPs). The resulting changes in solar structure have measurable effects on the frequencies of the solar 5-minute oscillations. Here, models are considered where the opacity in the solar core has been decreased in a manner which roughly simulates the effects of the WIMPs. The analysis of the models and their frequencies provides insight into the consequences of modifications to the physics of solar models. In particular, it is found that models with the observed neutrino flux are inconsistent with observations of low-degree solar oscillations.

Christensen-Dalsgaard, J.↗
DOE OSTI2026

Strong Sensitivity of Simulated Biomass Burning Aerosol Transport and Radiative Effects Over the South Atlantic to Carbonaceous Aerosol Aging and Particle Density

Biomass burning aerosol (BBA) impacts climate through aerosol‐cloud‐radiation interactions, but models disagree on the sign and magnitude of BBA radiative effects. We quantify the sensitivity of BBA radiative effects and transport to three BBA‐relevant processes and properties: parameterized oxidative aging of organic aerosol (OA), a combined change to black carbon (BC) density and the method for calculating aerosol refractive index, and reduction in OA density. We evaluate Unified Model simulations against two aircraft campaigns from summer 2017 over the Southeast Atlantic. The model generally performs well, such that discrepancies between the observational data sets may sometimes limit the precision of the evaluation. Our newly developed aging parameterization reproduces observed OA:BC mass ratios well and allows modeled OA:BC to decrease with smoke age, but increases bias in aerosol extinction and changes the BBA radiative effect little (+0.12 W m -2 ). We calculate aerosol refractive index using either a volume‐weighted component average or the Maxwell‐Garnett (MG) mixing assumption, which represents BC as small inclusions in a host material. Compared to MG mixing, the volume‐weighted average refractive index and reduced BC density increase aerosol absorption, substantially increasing the total BBA radiative effect (+2.66 W m -2 ) and amount of BBA transported across the ocean through BC self‐lofting. Reducing OA density to better match literature values changes the total BBA radiative effect by −1.96 W m -2 . Changes to direct radiative effects exceed changes to cloud radiative effects. Our findings emphasize the sensitivity of aerosol radiative effects and transport to these processes and properties, which we suggest could be improved in climate models.

Southeast Atlantic↗
DOE OSTI2022

Hybrid data-driven and model-informed online tool wear detection in milling machines

Precision machining tool wear is responsible for low product throughput and quality. Monitoring the tool wear online is vital to prevent degradation in machining quality. However, direct real-time tool wear measurement is not practical. This paper presents residual-based anomaly detection models, combining a hybrid model comprised of a physics-based model and a data-driven model (a decision tree or a neural network) to predict signals of interest (e.g., power or forces) under nominal conditions, followed by Page’s cumulative sum test for detecting tool wear on-line using the computer numerical control machine measurements. The most informative features are ranked using dynamic programming and its approximation variants from real-time measurements and machine settings, such as the width of cut, depth of cut, feed rate and spindle speed, that serve as inputs to the predictive models. The baseline nominal model is incrementally updated with experimental data via a gradient boosted adaptation model to generate the residuals that account for discrepancies between the actual machine data under normal conditions and the baseline nominal model predictions. The hybrid model is validated against 20 Mazak milling machine experimental tests and one Haas run-to-failure experiment. The proposed anomaly detector is applied to synthetic data from simulations of the physics-based model at different operating conditions, measurement noise levels, and tool wear levels, and the methods were able to achieve an overall 92% accuracy in data with 1% noise. The anomaly detection methods based on hybrid model reduced the false alarms of either the data-driven or physical-based models alone, and are found to be capable of good online detection of tool wear.

42 ENGINEERING↗
NASA NTRS2022

Hybrid data-driven and model-informed online tool wear detection in milling machines

Precision machining tool wear is responsible for low product throughput and quality. Monitoring the tool wear online is vital to prevent degradation in machining quality. However, direct real-time tool wear measurement is not practical. This paper presents residual-based anomaly detection models, combining a hybrid model comprised of a physics-based model and a data-driven model (a decision tree or a neural network) to predict signals of interest (e.g., power or forces) under nominal conditions, followed by Page’s cumulative sum test for detecting tool wear on-line using the computer numerical control machine measurements. The most informative features are ranked using dynamic programming and its approximation variants from real-time measurements and machine settings, such as the width of cut, depth of cut, feed rate and spindle speed, that serve as inputs to the predictive models. The baseline nominal model is incrementally updated with experimental data via a gradient boosted adaptation model to generate the residuals that account for discrepancies between the actual machine data under normal conditions and the baseline nominal model predictions. The hybrid model is validated against 20 Mazak milling machine experimental tests and one Haas run-to-failure experiment. The proposed anomaly detector is applied to synthetic data from simulations of the physics-based model at different operating conditions, measurement noise levels, and tool wear levels, and the methods were able to achieve an overall 92% accuracy in data with 1% noise. The anomaly detection methods based on hybrid model reduced the false alarms of either the data-driven or physical-based models alone, and are found to be capable of good online detection of tool wear.

Online anomaly detection↗
NASA NTRS2024

Storm-Time Variability of Terrestrial Hydrogen Exosphere: Kinetic Simulation Results

Recent studies of TWINS Lyman-α observations have reported an increase in geocoronal column brightness during geomagnetic storms, indicating enhanced exospheric hydrogen atom density (NH). This suggests a complex role of exospheric neutrals in determining storm-time magnetosphere dynamics and their energy release through charge-exchange processes. We developed a Model for Analyzing Terrestrial Exosphere (MATE) to investigate storm-time exospheric behaviors and their physical drivers. MATE traces test hydrogen atoms backward in time from locations in the exosphere to a nominal exobase altitude of 500 km, employing Newtonian mechanics with gravitational force. The model then calculates the phase-space densities (PSDs) of test hydrogen atoms at the exobase using the Maxwellian distribution with physics-based exobase conditions from the TIMEGCM upper atmosphere model. MATE maps PSDs at the exobase to the exosphere using Liouville’s Theorem under collisionless assumptions and derives NH by integrating the PSDs across velocity space. We conducted MATE simulation before, during, and after a minor geomagnetic storm from 12 to 18 June 2008, and compared the model results with NH estimates from the TWINS geocorona data. MATE reproduces storm-time density enhancements soon after the minimum Dst is reached, matching well with a general trend of TWINS NH estimates. The results suggest that upper atmospheric heating during a geomagnetic storm increases the number of ballistic and escaping hydrogen atoms entering the exosphere from the exobase, thereby boosting NH. However, the magnitude of modeled NH mismatches the TWINS NH estimates. The potential mechanisms of this density discrepancy include the physics excluded in the MATE model — such as neutralneutral collisions, neutral-plasma charge exchange, solar radiation pressure, and photoionization — as well as the higher exobase hydrogen density of TIMEGCM compared to typical empirical values, which will be addressed in future.

Hyunju K Connor↗
DOE OSTI2025

A multifrequency study of sub-parsec jets with the Event Horizon Telescope

Context. The 2017 observing campaign of the Event Horizon Telescope (EHT) delivered the first very long baseline interferometry (VLBI) images at the observing frequency of 230 GHz, leading to a number of unique studies on black holes and relativistic jets from active galactic nuclei (AGN). In total, eighteen sources were observed, including the main science targets, Sgr A* and M 87, and various calibrators. Sixteen sources were AGN.Aims. We investigated the morphology of the sixteen AGN in the EHT 2017 data set, focusing on the properties of the VLBI cores: size, flux density, and brightness temperature. We studied their dependence on the observing frequency in order to compare it with the Blandford-Königl (BK) jet model. In particular, we aimed to study the signatures of jet acceleration and magnetic energy conversion.Methods. We modeled the source structure of seven AGN in the EHT 2017 data set using linearly polarized circular Gaussian components (1749+096, 1055+018, BL Lac, J0132–1654, J0006–0623, CTA 102, and 3C 454.3) and collected results for the other nine AGN from dedicated EHT publications, complemented by lower frequency data in the 2–86 GHz range. Combining these data into a multifrequency EHT+ data set, we studied the dependences of the VLBI core component flux density, size, and brightness temperature on the frequency measured in the AGN host frame (and hence on the distance from the central black hole), characterizing them with power law fits. We compared the observations with the BK jet model and estimated the magnetic field strength dependence on the distance from the central black hole.Results. Our observations spanning event horizon to parsec scales indicate a deviation from the standard BK model, particularly in the decrease of the brightness temperature with the observing frequency. Only some of the discrepancies may be alleviated by tweaking the model parameters or the jet collimation profile. Either bulk acceleration of the jet material, energy transfer from the magnetic field to the particles, or both are required to explain the observations. For our sample, we estimate a general radial dependence of the Doppler factor δ ∝ r≤0.5. This interpretation is consistent with a magnetically accelerated sub-parsec jet. We also estimate a steep decrease of the magnetic field strength with radius B ∝ r−3, hinting at jet acceleration or efficient magnetic energy dissipation.Key words: techniques: interferometric / galaxies: active / galaxies: jets / galaxies: nuclei / quasars: general / quasars: supermassive black holes⋆⋆ Deceased.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1978

Jupiter's atmosphere - Observations and interpretation of the microwave spectrum near 1.25-cm wavelength

Measurements of Jupiter's disk-temperature spectrum in the 20- to 24-GHz (1.5 cm less than lambda less than 1.25 cm) region are reported. These data are combined with previously published data to produce a uniformly calibrated thermal spectrum of Jupiter in the wavelength interval 0.85 to 2.1 cm. Model studies are carried out to determine optimum pressure-temperature profiles for an assumed radiative-convective temperature structure. It is found that the temperature at the 1-bar total effective pressure level is between 140 and 165 K, with a most probable value of 153 K, provided that NH3 is uniformly saturated in the clouds on a global scale. We show that the temperature profile for the microwave model is approximately 20 K cooler than the profiles derived from infrared data. An explanation of this discrepancy is discussed in terms of a model which invokes different NH3 distributions in the belts and zones.

Klein, M. J.↗
DOE OSTI2018

Structural Control on Downdip Locking Extent of the Himalayan Megathrust

Here, geologic reconstructions of the Main Himalayan Thrust in Nepal show a laterally extensive midcrustal ramp, hypothesized to form the downdip boundary of interseismic locking. Using a recent compilation of interseismic GPS velocities and a simplified model of fault coupling, we estimate the width of coupling across Nepal using a series of two-dimensional transects. We find that the downdip width of fault coupling increases smoothly from 70 to 90 km in eastern Nepal to 100–110 km in central Nepal, then narrows again in western Nepal. The inferred coupling transition is closely aligned with geologic reconstructions of the base of the midcrustal ramp in central and eastern Nepal, but in western Nepal, the data suggest that the location is intermediate between two proposed ramp locations. The result for western Nepal implies either an anomalous coupling transition that occurs along a shallowly dipping portion of the fault or that both ramps may be partially coupled and that a proposed crustal-scale duplexing process may be active during the interseismic period. We also find that the models require a convergence rate of 15.5 ± 2 mm/year throughout Nepal, reducing the geodetic moment accumulation rate by up to 30% compared with earlier models, partially resolving an inferred discrepancy between geodetic and paleoseismic estimates of moment release across the Himalaya.

58 GEOSCIENCES↗
DOE OSTI2024

The key role of forest disturbance in reconciling estimates of the northern carbon sink

Northern forests are an important carbon sink, but our understanding of the driving factors is limited due to discrepancies between dynamic global vegetation models (DGVMs) and atmospheric inversions. We show that DGVMs simulate a 50% lower sink (1.1 ± 0.5 PgC yr –1 over 2001–2021) across North America, Europe, Russia, and China compared to atmospheric inversions (2.2 ± 0.6 PgC yr –1 ). We explain why DGVMs underestimate the carbon sink by considering how they represent disturbance processes, specifically the overestimation of fire emissions, and the lack of robust forest demography resulting in lower forest regrowth rates than observed. We reconcile net sink estimates by using alternative disturbance-related fluxes. We estimate carbon uptake through forest regrowth by combining satellite-derived forest age and biomass maps. We calculate a regrowth flux of 1.1 ± 0.1 PgC yr –1 , and combine this with satellite-derived estimates of fire emissions (0.4 ± 0.1 PgC yr –1 ), land-use change emissions from bookkeeping models (0.9 ± 0.2 PgC yr –1 ), and the DGVM-estimated sink from CO 2 fertilisation, nitrogen deposition, and climate change (2.2 ± 0.9 PgC yr –1 ). The resulting ‘bottom-up’ net flux of 2.1 ± 0.9 PgC yr –1 agrees with atmospheric inversions. The reconciliation holds at regional scales, increasing confidence in our results.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Understanding the structure and mechanism of Na + diffusion in NASICON solid-state electrolytes and the effect of Sc- and Al/Y-substitution

NASICON (sodium superionic conductor) based ceramics are one of the most promising classes of solid-state electrolytes for all-solid-state batteries. However, the mechanism of sodium ion diffusion is not understood in great detail since there is still a discrepancy between reported average structure models, local structures, and the number and position of sodium sites. To close this gap, we investigate the underlying diffusion mechanism and structural changes governing the Na + transport in Na 3.4 Zr 2 Si 2.4 P 0.6 O 12 using quasielastic neutron scattering (QENS) and powder X-ray diffraction (XRD). In the temperature range from 298 K to 640 K, the correlations between structural changes of a monoclinic C2/c to rhombohedral R $\bar{3}$c phase transition and the result of ion diffusion are investigated. The analysis of the quasielastic neutron scattering data reveals two quasielastic components corresponding to the Chudley-Elliott jump-diffusion model. It clearly shows two different Na + diffusion processes, local and long-range, on two different time and length scales and allows calculations of their corresponding activation energies. Additionally, the effects of Sc 3+ and Al 3+ /Y 3+ aliovalent substitution of Zr 4+ ions on the crystal structure and Na + diffusion are also studied. We can distinguish a local, chain, and cross-chain diffusion mechanism based on correlated QENS and XRD comparison of relevant nearest crystallographic Na–Na distances. The results reveal that the Na + diffusion in these NASICONs is three-dimensional and can provide guidelines on how dopants and changes in the crystal structure can affect the Na + conductivity.

25 ENERGY STORAGE↗
DOE OSTI2023

Precision Measurement of the W Mass

Using proton-antiproton collision data corresponding to an integrated luminosity of 8.8 fb-1 collected in Tevatron Run 2, CDF performed a high precision measurement of the W mass. This result, 80433.5±6.4±6.9 MeV, is the most precise so far, and shows a discrepancy of 76 with Standard Model expectations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Isotope study of the nonlinear pressure shifts of 85 Rb and 87 Rb hyperfine resonances in Ar, Kr, and Xe buffer gases

Measurements of the 0–0 hyperfine resonant frequencies of ground-state 85 Rb atoms show a nonlinear dependence on the pressure of the buffer gases Ar, Kr, and Xe. The nonlinearities are similar to those previously observed with 87 Rb and 133 Cs and presumed to come from alkali-metal–noble-gas van der Waals molecules. However, the shape of the nonlinearity observed for Xe conflicts with previous theory, and the nonlinearities for Ar and Kr disagree with the expected isotopic scaling of previous 87 Rb results. Improving the modeling alleviates most of these discrepancies by treating rotation quantum mechanically and considering additional spin interactions in the molecules. Including the dipolar-hyperfine interaction allows simultaneous fitting of the linear and nonlinear shifts of both 85 Rb and 87 Rb in either Ar, Kr, or Xe buffer gases with a minimal set of shared, isotope-independent parameters. To the limit of experimental accuracy, the shifts in He and N 2 were linear with pressure. Further, the results are of practical interest to vapor-cell atomic clocks and related devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Elimination LArTPC Simulation Uncertainty

Liquid Argon Time Projection Chambers (LArTPC) are essential for detecting muons and neutrinos by capturing electrons released during particle collisions, which drift toward wire planes under an electric field and induce currents measured to reconstruct particle paths. However, LArTPCs face challenges from effects such as electron-ion recombination, electron diffusion, and electron attenuation, complicating data simulation. The Short Baseline Neutrino (SNB) detector aims to measure neutrinos before oscillation occurs. To bridge the gap between simulation and actual data, we propose modifying the amplitude and width of signals on the TPC wires, addressing uncertainties by adjusting signal characteristics to better match observed data. A Gaussian fit to current waveforms produces hits with associated charge and width, and by comparing data and simulated values, discrepancies highlight areas where the model fails. Initial results indicate the current modification algorithm may increase divergence between simulation and data, necessitating further refinement. A discovered bug in the WireModMakeHist_plug.cpp file, which incorrectly computed simulation and data ratios, underscores the need for precise algorithm adjustments. Future work involves correcting code errors, fine-tuning the model, and conducting multiple simulation runs to enhance statistical confidence and reduce uncertainties, ultimately aiming for accurate LArTPC operation and reliable neutrino detection.

Mkrtchyan, Ka'ren↗
DOE OSTI2021

Information Entropy as Quantifier of Potential Predictability in the Tropical Indo-Pacific Basin

Global warming is posed to modify the modes of variability that control much of the climate predictability at seasonal to interannual scales. The quantification of changes in climate predictability over any given amount of time, however, remains challenging. Here we build upon recent advances in non-linear dynamical systems theory and introduce the climate community to an information entropy quantifier based on recurrence. The entropy, or complexity of a system is associated with microstates that recur over time in the time-series that define the system, and therefore to its predictability potential. A computationally fast method to evaluate the entropy is applied to the investigation of the information entropy of sea surface temperature in the tropical Pacific and Indian Oceans, focusing on boreal fall. In this season the predictability of the basins is controlled by two regularly varying non-linear oscillations, the El Niño-Southern Oscillation and the Indian Ocean Dipole. We compute and compare the entropy in simulations from the CMIP5 catalog from the historical period and RCP8.5 scenario, and in reanalysis datasets. Discrepancies are found between the models and the reanalysis, and no robust changes in predictability can be identified in future projections. The Indian Ocean and the equatorial Pacific emerge as troublesome areas where the modeled entropy differs the most from that of the reanalysis in many models. A brief investigation of the source of the bias points to a poor representation of the ocean mean state and basins' connectivity at the Indonesian Throughflow.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

The QCD Adler Function and the Muon g − 2 Anomaly from Renormalons

We describe the Adler function in Quantum Chromodynamics using a transseries representation within a resurgent framework. The approach is based on a Borel-Ecalle resummation of the infrared renormalons combined with an effective running for the strong coupling. The new approach is flexible enough to give values in agreement with the current Adler function determinations. We then apply our finding to the muon’s anomalous magnetic moment studying the possibility of saturating, solely in terms of the vacuum polarization function, the current discrepancy between the best Standard Model value for the muon’s anomalous magnetic moment and the experimental value obtained by the most recent muon g−2 collaboration. The latter shows that the Adler function’s new representation can also be consistent with recent lattice determinations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1980

Theory of extrinsic and intrinsic heterojunctions in thermal equilibrium

A careful analysis of an abrupt heterojunction consisting of two distinct semiconductors either intrinsic or extrinsic is presented. The calculations apply to a one-dimensional, nondegenerate structure. Taking into account all appropriate boundary conditions, it is shown that the intrinsic Fermi level shows a discontinuity at the interface between the two materials which leads to a discontinuity of the valence band edge equal to the difference in the band gap energies of the two materials. The conduction band edge stays continuous however. This result is independent of possible charged interface states and in sharp contrast to the Anderson model. The reasons for this discrepancy are discussed.

Von Ross, O.↗