Search NASA⌕ Search

SEARCH · Search NASA

Results for “Molecular Weight”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Unique Diacidic Fragments Inhibit the OXA-48 Carbapenemase and Enhance the Killing of Escherichia coli Producing OXA-48

Despite the advances in β-lactamase inhibitor development, limited options exist for the class D carbapenemase known as OXA-48. OXA-48 is one of the most prevalent carbapenemases in carbapenem-resistant Enterobacteriaceae infections and is not susceptible to most available β-lactamase inhibitors. Here, we screened various low-molecular-weight compounds (fragments) against OXA-48 to identify functional scaffolds for inhibitor development. Several biphenyl-, naphthalene-, fluorene-, anthraquinone-, and azobenzene-based compounds were found to inhibit OXA-48 with low micromolar potency despite their small size. Co-crystal structures of OXA-48 with several of these compounds revealed key interactions with the carboxylate-binding pocket, Arg214, and various hydrophobic residues of β-lactamase that can be exploited in future inhibitor development. A number of the low-micromolar-potency inhibitors, across different scaffolds, synergize with ampicillin to kill Escherichia coli expressing OXA-48, albeit at high concentrations of the respective inhibitors. Additionally, several compounds demonstrated micromolar potency toward the OXA-24 and OXA-58 class D carbapenemases that are prevalent in Acinetobacter baumannii . In conclusion, this work provides foundational information on a variety of chemical scaffolds that can guide the design of effective OXA-48 inhibitors that maintain efficacy as well as potency toward other major class D carbapenemases.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

NMR Studies of Block Copolymer-Based Supramolecules in Solution

Hierarchical assemblies from block copolymer (BCP)-based supramolecules have shown immense potential as programmable materials owing to their versatility for incorporating functional molecules and provide access to arrays of hierarchical structures. However, there remains a knowledge gap on the formation of the supramolecule in solution. Here, we applied NMR techniques to investigate the solution-phase behavior of the most studied supramolecular systems, polystyrene-block-poly(4-vinylpyridine)(3-pentadecylphenol) (PS-b-P4VP(PDP) r ). The results show that the supramolecule likely adopts a coil-comb conformation, despite the small molecule's (PDP) rapid exchange between the bonded and free states. The exchange rate (>10 4 s -1 ) exceeds the NMR time scale at the frequency of interest. The supramolecules form under dilute conditions (~2 vol %) and are attributed to the enthalpic gain of the hydrogen bonding between the PDP and 4VP. As the solute concentration increases (>10 vol %), the supramolecule forms micelle-like aggregates with PDP accumulated within the comb-block's pervaded volume based on analysis of the apparent molecular weight, viscosity, and chain dynamics. Overall, this work sheds light on the long-standing question regarding the evolution of the constituents in the BCP-based supramolecule in solution and provides valuable guidance toward their solution-based processing and morphological control.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Rapid Postgrafting Reaction to Prepare Quaternized Polycarbazoles

We report a rapid postgrafting reaction to prepare alkyl ammonium functionalized polycarbazoles from a commercially available monomer. This novel synthetic approach provides benefit to preparing the high molecular weight quaternized polycarbazoles within 1 h of Friedel–Crafts polycondensation, avoiding the synthesis and purification step to prepare a functionalized monomer. The postgrafting reaction produces hexyl alkyl ammonium functionalized polycarbazole with 100% grafting degree. However, the postgrafting reaction produced only 60% grafting with propyl alkyl ammonium due to the competitive elimination reaction because of the higher acidity of β-hydrogen in the propyl alkyl group resulting from the proximity of the bromide and ammonium groups. The hexyl alkyl ammonium functionalized polycarbazole has a high hydroxide conductivity of 103 mS cm –1 at 80 °C and showed excellent alkaline stability with less than 3% loss of ion group after 1 M NaOH treatment at 80 °C for 500 h. In conclusion, this study highlights that the postgrafting reaction provides a pathway for the scale-up synthesis of quaternized aryl ether-free polyaromatics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Neutron Reflectometry Reveals Diffusion in Contrast-Matched Brush Particle Bilayers

A material system for performing layer-spread experiments on brush particle bilayers is presented and used to determine the diffusion constant of brush particles in the melt state. Selective deuteration of the core and shell of organo-silica nanoparticles grafted with poly(methyl methacrylate) was used to match the scattering length density of the core and the polymer canopy layer. This subdued the scattering of particle cores (i.e., formfactor scattering) and enabled the analysis of the interdiffusion kinetics using neutron reflectivity. For low molecular grafts, i.e., grafts with a molecular weight below the entanglement limit, the interdiffusion kinetics revealed both a sub- and Fickian diffusion regime. The former was attributed to the local dynamics that was constrained by the slow-moving cores of neighboring brush particles that acted as long-lived physical cross-links. No transition to Fickian diffusion was observed for entangled systems, even at prolonged annealing times. This suggested a higher level of kinetic restraint in entangled brush particle melts as compared to, for example, star polymers with a comparable chain length for which Fickian diffusion has been reported under similar conditions.

Diffusion, Polymer Grafted Nanoparticles, Neutron ↗
DOE OSTI2026

Role of Amorphous Chains in Nanoplastic Formation from Semicrystalline Polymers

Semicrystalline polymers, e.g., polyethylene terephthalate (PET), release micro- (100 nm to 1 mm) and nanoplastics (up to 100 nm) [MNPL] when they are degraded under quiescent conditions. However, the exact molecular mechanisms leading to material fragmentation into MNPL are unknown. Here, we monitor the evolution of chain molecular weight and the MNPL production kinetics during hydrolysis of PET pellets. We find that only ~0.6% of the amorphous phase ester bonds are hydrolyzed at the onset of MNPL release. Then, by combining a random scission model with measured amorphous spacings, we estimate that only ~15% of the stress transmitters in the amorphous phase, namely, bridges and entangled loops, have failed by this point. Thus, spontaneous fragmentation of the semicrystalline nanostructure occurs despite significant intercrystalline connectivity. We resolve this apparent contradiction by proposing that fragmentation can only occur when progressive tie-chain scission causes the material to undergo the ductile/brittle transition. Mechanistically, we speculate that the internal stresses responsible for material fragmentation are caused by processing (i.e., residual stresses) and/or sample densification induced by chemi-crystallization. We discuss additional factors that may affect our analysis and thus require further investigation, such as skin-core effects, preferential degradation of stress transmitters and/or recrystallization processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Chemical Recycling of Carbon Fiber-Reinforced Nylon Composites

Nylon-based fiber-reinforced composites are widely used in various sectors due to their strength, durability, and lightweight properties. Despite their widespread use, recycling these composites is difficult due to the inability to separate fibers and thermal instability of nylon at high temperatures. Consequently, most nylon composites are landfilled, leading to significant economic loss. Current fiber recovery methods (i.e., pyrolysis) are energetically inefficient and preclude recovery of the matrix. Dissolution methods, such as using hexafluoroisopropanol (HFIP), allow recovery of polymer and fiber but are economically taxing and require extensive safety infrastructure. Herein we report tailored glycolysis of nylon-6 composites, resulting in separated constituent fibers and nylon-6 oligomers. Deconstruction kinetics reveal nylon’s molecular weight reductions from 32,600 to 2000 g/mol, while SEM and tensile testing confirm recovered fiber integrity. In conclusion, this approach offers a pathway to reclaim high-value materials from nylon composites, providing a strategy for the chemical recycling of fiber-reinforced composites.

Zheng, Jackie [Univ. of Tennessee, Knoxville, TN (↗
DOE OSTI2020

Intrinsic Ion Transport Properties of Block Copolymer Electrolytes

Knowledge of intrinsic properties is of central importance for materials design and assessing suitability for specific applications. Self-assembling block copolymer electrolytes (BCEs) are of great interest for applications in solid-state energy storage devices. A fundamental understanding of ion transport properties, however, is hindered by the difficulty in deconvoluting extrinsic factors, such as defects, from intrinsic factors, such as the presence of interfaces between the domains. Here, we quantify the intrinsic ion transport properties of a model BCE system consisting of poly(styrene-block-ethylene oxide) (SEO) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt using a generalizable strategy of depositing thin films on interdigitated electrodes and self-assembling fully connected parallel lamellar structures throughout the films. Comparison between conductivity in homopolymer poly(ethylene oxide) (PEO)-LiTFSI electrolytes and the analogous conducting material in SEO over a range of salt concentrations (r, molar ratio of lithium ion to ethylene oxide repeat units) and temperatures reveals that between 20% and 50% of the PEO in SEO is inactive. Using mean-field theory calculations of the domain structure and monomer concentration profiles at domain interfaces-both of which vary substantially with salt concentration-the fraction of inactive PEO in the SEO, as derived from conductivity measurements, can be quantitatively reconciled with the fraction of PEO that is mixed with greater than a few volume percent of polystyrene. Despite the detrimental interfacial effects for ion transport in BCEs, the intrinsic conductivity of the SEO studied here (ca. 10 -3 S/cm at 90 degrees C, r = 0.085) is an order of magnitude higher than reported values from bulk samples of similar molecular weight SEO (ca. 10 -4 S/cm at 90 degrees C, r = 0.085). Finally, this work provides motivation and methods for pursuing improved BCE chemical design, interfacial engineering, and processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Use of Renewable Alcohols in Autocatalytic Production of Aspen Organosolv Lignins

This study aimed to investigate the intrinsic efficiency of renewable alcohols, applied under autocatalytic conditions, for removing lignin from aspen and hot-water-extracted aspen while substantially preserving the lignin structure so as to facilitate various valorization strategies. Ethylene glycol (EG), propylene glycol (PG), 1,4-butanediol (BDO), ethanol (EtOH), and tetrahydrofurfuryl alcohol (THFA) were evaluated based on their lignin solubilization ability, expressed as the relative energy difference (RED) following the principles of the Hansen solubility theory. The findings indicate that alcohols with a higher lignin solubilization potential lead to increased delignification, almost 90%, and produce a lignin with a higher content of β-O-4 bonds, up to 68% of those found in aspen milled wood lignin, thereby indicating their potential for valorization through depolymerization. However, these alcohols also produce lignin with a higher content of β-β and β-5 bonds, resulting in a higher molecular weight and polydispersity, due to readily occurring homolytic reactions. Hot-water extraction (HWE) conducted prior to alcohol treatment reduced the delignification efficiency and resulted in a lignin with a lower β-O-4 bond content. The lignins produced in these experiments exhibited a superior UV-A absorption capacity compared with synthetic benzophenone, as well as a greater radical quenching ability than synthetic butylated hydroxytoluene, indicating their potential for use in the protection of polymers against degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Commodity Thermoplastic Elastomer-Enabled Templated Synthesis of Large-Pore Ordered Mesoporous Materials

Fabrication of ordered mesoporous materials (OMMs) has predominantly relied on templating-based methods. However, these methods are constrained by several limitations, especially the limited pore sizes attainable with commercially available surfactants used as structure-directing agents. To unlock the full potential of the OMMs, it is essential to develop synthetic strategies that facilitate the production of large-pore OMMs using scalable processes and cost-effective precursors. This work demonstrates the use of thermoplastic elastomer (TPE)-derived carbon replicas for synthesizing ordered mesoporous silica (OMS) and metal oxides (OMMOs) via precursor infiltration and template removal. The nanostructural evolution of the resulting inorganic materials was systematically investigated. Specifically, using tetraethyl orthosilicate (TEOS) as a silica precursor, this method can produce an OMS with relatively large pores. To establish the generalizability of this process, the fabrication approach was extended to other commercially available TPEs with varied chemical compositions and molecular weights while consistently resulting in ordered structures. Additionally, this synthetic strategy can be successfully applied to the production of OMMOs, including tin and titanium oxide matrix chemistries, yielding pore sizes of 16.0 and 19.2 nm, respectively. By developing a general method and using low-cost precursors, this work presents a scalable approach for fabricating large-pore OMMs with tunable pore textures and matrix chemistries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Directly Probing the Fracture Behavior of Ultrathin Polymeric Films

Understanding fracture mechanics of ultrathin polymeric films is crucial for modern technologies, including semiconductor and coating industries. However, up to now, the fracture behavior of sub-100 nm polymeric thin films is rarely explored due to challenges in handling samples and limited testing methods available. In this work, we report a new testing methodology that can not only visualize the evolution of the local stress distribution through wrinkling patterns and crack propagation during the deformation of ultrathin films but also directly measure their fracture energies. Using ultrathin polystyrene films as a model system, we both experimentally and computationally investigate the effect of the film thickness and molecular weight on their fracture behavior, both of which show a ductile-to-brittle transition. Furthermore, we demonstrate the broad applicability of this testing method in semicrystalline semiconducting polymers. We anticipate our methodology described here could provide new ways of studying the fracture behavior of ultrathin films under confinement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Techno-Economic Analysis and Life Cycle Assessment of Waste Lignin Fractionation and Valorization Using the ALPHA Process

Techno-Economic Analysis (TEA) and Life Cycle Assessment (LCA) were performed on the Aqueous Lignin Purification with Hot Agents (ALPHA) process, which is being investigated for the fractionation and purification of raw, bulk lignins recovered from cellulosic ethanol biorefineries or Kraft pulp mills. Here, ALPHA is proposed for the isolation of lignin from a corn stover-to-ethanol plant into purified low, medium, and high molecular weight (MW) fractions for producing polyurethane foam, activated carbon, and carbon fiber, respectively. A scenario analysis was conducted to determine the effect of ALPHA solvent choice on process economics and environmental performance. Solvent choice was found to have a significant impact on ALPHA, with a minimum selling price of 838/tonne with use of acetic acid vs 463/tonne with ethanol. Conversion of the lignin, processed with ethanol solvent, to high-value products yields 151 million/year in profit, which over 30 years results in a total net present value of 533 million. A life cycle assessment was conducted to determine the “gate-to-gate” greenhouse gas emissions and energy consumption of the lignin-based products compared to fossil-based equivalents. In conclusion, a value allocation scenario was conducted and it was determined that products generated using the ALPHA process with ethanol have similar or lower greenhouse gas emissions than the same products from fossil feedstocks.

09 BIOMASS FUELS↗
DOE OSTI2021

Hydrogenolysis of Polypropylene and Mixed Polyolefin Plastic Waste over Ru/C to Produce Liquid Alkanes

Catalytic depolymerization of polyolefins is a promising chemical recycling strategy to create value-added products from waste plastics, which are accumulating in landfills and the natural environment at unsustainable rates. The cleavage of strong C–C bonds in polyolefins can be performed using a noble metal and hydrogen via a hydrogenolysis mechanism. Previously, we identified ruthenium nanoparticles supported on carbon (Ru/C) as a highly active heterogeneous catalyst for the conversion of polyethylene into liquid and gaseous n-alkanes under mild conditions. In the present study, we investigated the catalytic depolymerization of polypropylene (PP) under mild conditions (200–250 °C, 20–50 bar H 2 ). We demonstrate that Ru/C produces C 5 –C 32 iso-alkane yields above 68% in the absence of solvent and identify trade-offs between product yield and temperature, hydrogen pressure, and reaction time. We apply a rigorous analytical method to quantify all liquid and gaseous alkane products. The characterized catalyst was found to be recyclable after the complete depolymerization of high molecular weight PP (M w ~ 340,000 Da) to liquid and gaseous hydrocarbons and after depolymerization of a postconsumer PP centrifuge tube. Finally, the catalyst was shown to be effective in depolymerizing a mixture of high-density polyethylene and PP to produce a mixture of linear and branched liquid alkanes, demonstrating feasibility for the depolymerization of streams of mixed polyolefin waste.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Determination of Infinite Dilution Activity Coefficients of Molecular Solutes in Ionic Liquids and Deep Eutectic Solvents by Factorization-Machine-Based Neural Networks

Widely known as “green solvents,” ionic liquids (ILs) and deep eutectic solvents (DESs) have been used as substitutes for traditional organic solvents in separation science. To achieve better separations using ILs and DESs, this work aimed to predict the infinite dilution activity coefficients (IDACs) of molecular solutes in these solvents with the state-of-the-art factorization-machine-based neural network (DeepFM). DeepFM combines the benefits of factorization machines and deep neural networks to learn both low-order and high-order interactions among features. The IDAC prediction model was established with 52,372 experimental IDAC datapoints including 260 solvents (252 ILs and 8 DESs) and 112 molecular solutes collected at various temperatures from 288.15 to 428.15 K. Chemical information describing the ILs, DESs, and molecular solutes was included in the IDAC prediction model, including chemical functional groups, molecular weights, and Abraham solvation parameters. The IDAC prediction model showed an improved accuracy compared with alternative models; additionally, DESs were included in the IDAC prediction model for the first time. Here, the model will reduce the energy and resources needed to optimize the selection of ILs and DESs for specific separations, which will promote the development of these green solvents for sustainable chemical processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Oxidative Functionalization of Long-Chain Liquid Alkanes by Pulsed Plasma Discharges at Atmospheric Pressure

In this work, we introduce the oxidation of long aliphatic alkanes using non-thermal, atmospheric plasma processing as an eco-friendly route for organic synthesis. A pulsed dielectric barrier discharge in He/O 2 gas mixtures was employed to functionalize n-octadecane. C 18 secondary alcohols and ketones were the main products, with an optimal molar yield of ~29.2%. Prolonged treatment resulted in the formation of dialcohols, diketones, and higher molecular weight oxygenates. Lighter hydrocarbon products and decarboxylation to CO 2 were also observed at longer treatment times and higher power inputs. A maximum energy yield of 5.48 × 10 –8 mol/J was achieved at short treatment times and high powers, associated with higher selectivity to primary oxygenates. Direct hydroxylation of alkyl radicals, as well as disproportionation reactions, are proposed as the main pathways to alcohols and ketones. The results hold promise for functionalizing long hydrocarbon molecules at ambient conditions using catalyst-free plasma discharges.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Green Needle Coke Production from Pyrolysis Biocrude toward Bio-based Anode Material Manufacture: Biochar Fines Addition Effect as “Physical Template” on the Crystalline Order

Here, a new method for producing green needle coke (GNC) is developed by replacing the “heavy fraction” of petroleum pitch delayed coking with fast pyrolysis biocrude. A series of alternative biocrude distillation, carbonization, and calcination conditions were investigated to determine the influence of these processing parameters onto the crystalline structure of the resulting graphitized material. For the first time, the addition of biochar fines was found to serve as a “physical template” to increase the graphitic nature of the final product. During the initial biocrude carbonization (350–450 °C), volatile compounds are released, and aromatics in pyrolysis biocrude experience condensation, resulting in GNC solids with carbon contents above 95 wt % and some early lamellar structure. In the second stage of the thermal process (25–1500 °C), there are additional thermal decomposition reactions with an increase in the aromatic nature of the graphitized solid. It was found that systematic addition of biochar fines induces a nucleating effect during the GNC development. Thermogravimetric analysis suggests that biochar fines promote polycondensation reactions by modifying the biopitch structure and molecular weight, while elemental analysis (CHN) shows a reduction in both H/C and O/C ratios which are consistent with the increase in aromaticity and removal of oxygenated compounds as thermal treatment evolves. The effects of different bio-based pitch materials (after distillation) and GNC intermediates were evaluated by pyrolysis-gas chromatography mass spectrometry and Fourier transform infrared, displaying slight changes on product yields and quality. X-ray diffraction patterns taken after graphitization evidence an increase in the graphitic order with the addition of biochar fines. Transmittance electron microscopy depicts an improvement on graphitic morphology as biochar fine content increases. The use of biochar fines showed a significant increase in graphitic ordering at addition levels above 0.01 wt %. These results show that thermally treated biocrude/biochar fine systems can produce graphitic structures (hard carbon-like) that might be suitable for the manufacture of sodium-ion batteries.

09 BIOMASS FUELS↗
DOE OSTI2024

Synthesis of Bio-Based Repairable Polyimines with Tailored Properties by Lignin Fractionation

Developing sustainable polymers with low-value lignin remains a challenge. Herein, lignin-containing repairable polyimines were synthesized with tailored properties using lignin fractionation. First, softwood Kraft lignin is fractionated into a more homogeneous fraction with a lower molecular weight and a higher OH content. Next, Kraft lignin and its fraction are esterified by levulinic acid to introduce active ketone groups and subsequently condensed with oleylamine (OAm) and bis(3-aminopropyl)-terminated polydimethylsiloxane (PDMS) via a catalyst-free Schiff-base reaction to form grafted lignin-OAm copolymers and cross-linked lignin-PDMS polymer networks (MKL-P and MFL-P), respectively. Results show that lignin-OAm polyimines can be self-repaired and hot reprocessed under pressure, while lignin-PDMS polyimines can be repaired with the assistance of a healing agent, heat, and pressure. Dynamic mechanical analyses demonstrate that the stress–relaxation behaviors of the polyimines follow the Arrhenius law under thermal-stress activation, indicating the occurrence of transimination. Moreover, compared with Kraft lignin, the lignin fraction ameliorates the grafting density of ketones and enhances the cross-linking density of lignin-PDMS polyimine networks. The higher cross-linking density of MFL-P leads to superior stress–relaxation activation energy, thermal stability, hydrophobicity, and light-shielding ability but inferior repairability and translucency. Finally, this work provides insights into the polymerization of lignin-based polymer networks and the potential application of lignin-PDMS polyimines for repairable, translucent, anti-UV, and hydrophobic coatings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Combining High-Throughput Experiments and Active Learning to Characterize Deep Eutectic Solvents

The high tunability of deep eutectic solvents (DESs) stems from the ease of changing their precursors and relative compositions. However, measuring the physicochemical properties across large composition and temperature ranges, necessary to properly design target-specific DESs, is tedious and error-prone and represents a bottleneck in the advancement and scalability of DES-based applications. As such, active learning (AL) methodologies based on Gaussian processes (GPs) were developed in this work to minimize the experimental effort necessary to characterize DESs. Owing to its importance for large-scale applications, the reduction of DES viscosity through the addition of a low-molecular-weight solvent was explored as a case study. A high-throughput experimental screening was initially performed on nine different ternary DESs. Then, GPs were successfully trained to predict DES viscosity from its composition and temperature, showcasing the ability of these stochastic, nonparametric models to accurately describe the physicochemical properties of complex mixtures. Finally, the ability of GPs to provide estimates of their own uncertainty was leveraged through an AL framework to minimize the number of data points necessary to obtain accurate viscosity modes. This led to a significant reduction in data requirements, with many systems requiring only five independent viscosity data points to be properly described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗