Search NASA⌕ Search

SEARCH · Search NASA

Results for “Operational Acceptability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Regaining Lost Separation in a Piloted Simulation of Autonomous Aircraft Operations

NASA is currently investigating a new concept of operations for the National Airspace System, designed to improve capacity while maintaining or improving current levels of safety. This concept, known as Distributed Air/Ground Traffic Management (DAG-TM), allows appropriately equipped autonomous aircraft to maneuver freely for flight optimization while resolving conflicts with other traffic and staying out of special use airspace and hazardous weather. While Airborne Separation Assurance System (ASAS) tools would normally allow pilots to resolve conflicts before they become hazardous, evaluation of system performance in sudden, near-term conflicts is needed in order to determine concept feasibility. If an acceptable safety level can be demonstrated in these situations, then operations may be conducted with lower separation minimums. An experiment was conducted in NASA Langley s Air Traffic Operations Lab to address issues associated with resolving near-term conflicts and the potential use of lower separation minimums. Sixteen commercial airline pilots flew a total of 32 traffic scenarios that required them to use prototype ASAS tools to resolve close range pop-up conflicts. Required separation standards were set at either 3 or 5 NM lateral spacing, with 1000 ft vertical separation being used for both cases. Reducing the lateral separation from 5 to 3 NM did not appear to increase operational risk, as indicated by the proximity to the intruder aircraft. Pilots performed better when they followed tactical guidance cues provided by ASAS than when they didn't follow the guidance. As air-air separation concepts are evolved, further studies will consider integration issues between ASAS and existing Airborne Collision Avoidance Systems (ACAS).These types of non-normal events will require the ASAS to provide effective alerts and resolutions prior to the time that an Airborne Collision Avoidance System (ACAS) would give a Resolution Advisory (RA). When an RA is issued, a pilot must take immediate action in order to avoid a potential near miss. The Traffic Alert and Collision Avoidance System (TCAS) II currently functions as an ACAS aboard commercial aircraft. Depending on the own aircraft s altitude, TCAS only issues RA s 15-35 seconds prior to the Closest Point of Approach (CPA). Prior to an RA, DAG-TM pilots operating autonomous aircraft must rely solely on ASAS for resolution guidance. An additional area of DAG-TM concept feasibility relates to a potential reduction in separation standards. Lower separation standards are likely needed in order to improve NAS efficiency and capacity. Current separation minimums are based in large part on the capabilities of older radar systems. Safety assessments are needed to determine the feasibility of reduced separation minimums. They will give strong consideration to surveillance system performance, including accuracy, integrity, and availability. Candidate surveillance systems include Automatic Dependent Surveillance-Broadcast (ADS-B) and multi-lateration systems. Considering studies done for Reduced Vertical Separation Minimums (RVSM) operations, it is likely that flight technical errors will also be considered. In addition to a thorough evaluation of surveillance system performance, a potential decision to lower the separation standards should also take operational considerations into account. An ASAS Safety Assessment study identified improper maneuvering in response to a conflict (due to ambiguous or improper resolution commands or a pilot s failure to comply with the resolution) as a potential safety risk. If near-term conflicts with lower separation minimums were determined to be more challenging for pilots, the severity of these risks could be even greater.

Barhydt, Richard↗
NASA NTRS1992

National launch system core vehicle

A new launch system is being defined to provide significant improvements in the national launch capability. The most challenging requirements are to reduce operational cost and increase system reliability, dependability, responsiveness while maintaining acceptable mission performance. System architecture studies have established that a family of vehicles is required to launch the required range of payloads. The vehicle design approach implements a design process that identifies the system design criteria and design concepts that enable the vehicle to meet the objectives of cost, reliability, safety and performance. The vehicle design features for the 50 to 100 K payload capability will utilize cost effective elements derived from existing vehicles, emerging technology and lessons learned to enable the system to be developed at a reasonable investment and to deliver payloads in an operationally efficient manner with high reliability.

Worlund, Armis L.↗
NASA NTRS1989

The JPL telerobot operator control station. Part 1: Hardware

The Operator Control Station of the Jet Propulsion Laboratory (JPL)/NASA Telerobot Demonstrator System provides the man-machine interface between the operator and the system. It provides all the hardware and software for accepting human input for the direct and indirect (supervised) manipulation of the robot arms and tools for task execution. Hardware and software are also provided for the display and feedback of information and control data for the operator's consumption and interaction with the task being executed. The hardware design, system architecture, and its integration and interface with the rest of the Telerobot Demonstrator System are discussed.

Kan, Edwin P.↗
NASA NTRS1989

The JPL telerobot operator control station. Part 2: Software

The Operator Control Station of the Jet Propulsion Laboratory (JPL)/NASA Telerobot Demonstrator System provides the man-machine interface between the operator and the system. It provides all the hardware and software for accepting human input for the direct and indirect (supervised) manipulation of the robot arms and tools for task execution. Hardware and software are also provided for the display and feedback of information and control data for the operator's consumption and interaction with the task being executed. The software design of the operator control system is discussed.

Kan, Edwin P.↗
NASA NTRS2012

Expanding AirSTAR Capability for Flight Research in an Existing Avionics Design

The NASA Airborne Subscale Transport Aircraft Research (AirSTAR) project is an Unmanned Aerial Systems (UAS) test bed for experimental flight control laws and vehicle dynamics research. During its development, the test bed has gone through a number of system permutations, each meant to add functionality to the concept of operations of the system. This enabled the build-up of not only the system itself, but also the support infrastructure and processes necessary to support flight operations. These permutations were grouped into project phases and the move from Phase-III to Phase-IV was marked by a significant increase in research capability and necessary safety systems due to the integration of an Internal Pilot into the control system chain already established for the External Pilot. The major system changes in Phase-IV operations necessitated a new safety and failsafe system to properly integrate both the Internal and External Pilots and to meet acceptable project safety margins. This work involved retrofitting an existing data system into the evolved concept of operations. Moving from the first Phase-IV aircraft to the dynamically scaled aircraft further involved restructuring the system to better guard against electromagnetic interference (EMI), and the entire avionics wiring harness was redesigned in order to facilitate better maintenance and access to onboard electronics. This retrofit and harness re-design will be explored and how it integrates with the evolved Phase-IV operations.

Laughter, Sean A.↗
NASA NTRSDate not supplied

Comparison of Active and Passive Head Impulse Testing of the Horizontal Vestibulo-Ocular Reflex: Exploring the Feasibility of Different Approaches for Spaceflight

INTRODUCTION: Astronauts experience a wide variety of sensorimotor disturbances primarily due to microgravity-induced vestibular adaptations during spaceflight. Head Impulse Testing (HIT) will be conducted during the Complement of Integrated Protocols for Human Exploration Research program(CIPHER) Vestibular Health study to examine changes in the horizontal vestibulo-ocular reflex in response to high-velocity head movements to detect changes in peripheral vestibular function [1,2]. However, correct interpretation will require consideration of potential artifacts and the constraints of conducting this test across different phases of the mission. Therefore, the aims of our study were to (1) examine reliability across different test operators, and (2) compare results of active (aHIT) versus passive (pHIT) approaches to evaluate the feasibility of self-administered versus operator-assisted approaches. A comparison of responses with visual viewing of a wall target (default condition) versus vision occluded evaluated the influence of other oculomotor control influence across conditions, and comparison with computer-generated rotator head impulse tests (rHIT) examined the variability associated with the ocular responses independent of the variability in executing the head movements themselves. METHODS: Seventeen non-astronaut volunteers (male n=12, age=22.9 ± 3.0; female n=5, age=27.0 ± 6.0, mean ± std) completed HIT testing using video-oculography (VOG) goggles and a high-torque rotator system. The test order was counterbalanced across conditions: (1) passive head-on-torso (pHIT, default condition for flight study) using two operators (Op1 and Op2), (2) active head-on-torso (aHIT, subject initiated), and (3) passive head and torso using rotary chair (rHIT). Eye and head movement data were processed to obtain gain in each direction. The main outcome measures were average gain and asymmetry [1], as well as the percentage of acceptable trials not excluded due to insufficient head amplitude or recording artifacts. RESULTS: While the pHIT gains were similar with vision (1.032 ± 0.043) and vision occluded (1.029 ± 0.038) conditions, the percentage of acceptable trials was greater with vision (Op1 = 93.0%, Op2 = 93.2%) versus occluded (Op1 = 70.7%, Op2 = 67.6%). The reliability between operators was greater for pHIT gain (Intraclass Correlation, ICC = 0.66, p = 0.001) than for pHIT asymmetry (ICC = 0.57, p = 0.01). The percentage of acceptable trials reduced by ~20% during the self-administered aHITs for both visual conditions and tended to be lower than computer-generated rHITs (76% versus 83%). While the aHIT gains were not significantly different than pHIT gains for vision or vision occluded conditions, these measures were poorly correlated. Both aHIT and pHIT gains were significantly greater than the rHIT gains, presumably due to the reduced velocities from the rotator. The asymmetry measures were poorly correlated across pHIT, aHIT, and rHIT conditions, although none of the subjects had asymmetries greater than 16%. DISCUSSION: Our findings support the feasibility of using the standard pHIT methodology for spaceflight. Similarities between visual conditions reflect that these responses are mediated by the peripheral lateral canals rather than other oculomotor mechanisms. The inter-tester reliability was acceptable despite differences in the tester training. In addition to concerns of non-vestibular mechanisms introduced during self-administered aHITs [2], operator-assisted pHITs resulted in higher percentage of acceptable trials and should result in more efficient and reliable measures during spaceflight.

M R Ehrenburg↗
NASA NTRS2004

Linear and Nonlinear Analyses of a Wind-Tunnel Balance

The NASA Langley Research Center (LaRC) has been designing strain-gauge balances for utilization in wind tunnels since its inception. The utilization of balances span a wide variety of aerodynamic tests. A force balance is an inherently critically stressed component due to the requirements of measurement sensitivity. Force balance stress analysis and acceptance criteria are under review due to LaRC wind tunnel operational safety requirements. This paper presents some of the analyses done at NASA LaRC. Research and analyses were performed in order to investigate the structural integrity of the balances and better understand their performance. The analyses presented in this paper are helpful in understanding the overall behavior of an existing balance and can also be used in design of new balances to enhance their performance. As a first step, maximum load combination is used for linear structural analysis. When nonlinear effects are encountered, the analysis is extended to include the nonlinearities. Balance 1621 is typical for LaRC designed balances and was chosen for this study due to its traditional high load capacity, Figure 1. Maximum loading occurs when all 6 components are applied simultaneously with their maximum value allowed (limit load). This circumstance normally will not occur in the wind tunnel. However, if it occurs, is the balance capable of handling the loads with an acceptable factor of safety? Preliminary analysis using Pro/Mechanica indicated that this balance might experience nonlinearity. It was decided to analyze this balance by using NASTRAN so that a nonlinear analysis could be conducted. Balance 1621 was modeled and meshed in PATRAN for analysis in NASTRAN. The model from PATRAN/NASTRAN is compared to the one from Pro/Mechanica. For a complete analysis, it is necessary to consider all the load cases as well as use a dense mesh near all the edges. Because of computer limitations, it is not feasible to analyze model with the dense mesh near all edges. In the present study, the dense mesh is limited to the surface on the end of the axial sections.

Karkehabadi, R.↗
NASA NTRS2018

Urban Air Mobility (UAM) Market Study

The Booz Allen Team explored market size and potential barriers to Urban Air Mobility (UAM) by focusing on three potential markets – Airport Shuttle, Air Taxi, and Air Ambulance. We found that the Airport Shuttle and Air Taxi markets are viable, with a significant total available market value in the U.S. of $500 billion, for a fully unconstrained scenario. In this unconstrained best-case scenario, passengers would have the ability to access and fly a UAM at any time, from any location to any destination, without being hindered by constraints such as weather, infrastructure, or traffic volume. Significant legal and regulatory, weather, certification, public perception, and infrastructure constraints exist, which reduce the market potential for these applications to only about 0.5% of the total available market, or $2.5 billion, in the near term. However, we determined that these constraints can be addressed through ongoing intra-governmental partnerships, government and industry collaboration, strong industry commitment, and existing legal and regulatory enablers. We found that the Air Ambulance market is not a viable market if served by electric vertical takeoff and landing (eVTOL) vehicles due to technology constraints but may potentially be viable if a hybrid VTOL aircraft are utilized. The barriers and challenges we characterized in this study can be stratified according to their applicability or potential mitigation through technology as well as market maturity (Figure 1). In the near term, high cost of service will be a key economic challenge. We found potential for significant reduction in service cost through increased vehicle and component efficiency, and automation in a more mature market scenario. Weather conditions also pose a challenge to the UAM market, though there is potential for mitigation of some of these impacts through technology such as sensors enabling operations in low visibility. However, even in a mature market with advanced technology, disruptions are still likely to occur due to weather events such as thunderstorms and strong winds. High density operations will likely stress the current Air Traffic Management (ATM) system in the near term, but technology and new initiatives such as the Air Traffic Management -eXploration project (ATM-X) will enable safe and efficient integration of UAM into the National Airspace System (NAS). Current battery technology creates a barrier in the near term, especially for the Air Ambulance market, as battery weight and extensive recharging times would be needed for these operations. Advancements in battery technology, as well as use of hybrid VTOLs, could significantly reduce this barrier in the longer term. As UAM emerges as a viable mode of transportation in the near term, adverse energy and environmental impacts, particularly noise, may impact community acceptance and potentially persist as the market matures into larger-scale operations. For non-technology related challenges, we found that infrastructure constraints will create a significant barrier to UAM in the near term but could be addressed in the longer term through development and expansion of vertiports. Competition from existing modes of transportation such as ride-sharing (e.g., Lyft, Uber) and ground taxi’s pose a key barrier to UAM in the short term, which will likely evolve into competition from other emerging technologies such as autonomous cars and electric trains in the longer term. Weather events will influence other components of the operation such as passenger comfort (e.g., extreme temperatures, turbulence) and infrastructure (e.g., winter weather causing cracks and degradation in vertiports). There is also potential for these impacts to be heightened in the longer term from the increased frequency of adverse weather such as thunderstorms due to changing climatic conditions. We also found that the public has strong concerns about safety as a passenger in a piloted UAM, including “lasing” of pilots, unruly passengers, and sabotage. They would prefer that all passengers pass through a security screening process before boarding a vehicle. They would also prefer to use UAM for longer regional trips, such as flying from Washington, DC to Baltimore, MD or San Diego, CA to Los Angeles, CA. A longer term automated UAM vehicle market will face challenges due to public apprehension about automation and unmanned operations, and a preference to fly with passengers they know in an autonomous (unmanned) operational scenario.

Rohit Goyal↗
NASA NTRS1994

A rose by any other name: Certification seen as process rather than content

Green (1990) believes that the two main factors safeguarding flying from human error are both related to certification and regulation. First is the increasingly proceduralized nature of flying whereby as much as possible is reduced to a rule-based activity. Second is the emphasis placed upon training and competency checking of aircrew in simulators and in the air, both generally and for all particular types of aircraft flown. This leaves, believes Green, other human factors that are relatively unaddressed as yet and which can give rise to human reliability problems. These include: hardware factors and especially pilot/co-pilot relationships; and system factors including fatigue and cost/safety trade-offs. He also, importantly, identifies problems with the integration of the 'electronic crew member' following increased automation. Human reliability failures with artificial intelligence and automation, due to over-reliance on the system fail-safe mechanisms, or to operator under- confidence in the integrity or self-regulating capacity of the system, or to out-of-loop effects, are widely accepted as being due to deficiencies in plant design, planning, management and maintenance more than to 'operator error' - Reason's (1990) latent error or organization pathogens argument. Reliability failures in complex systems are well enough documented to give cause for concern and at least promote a debate on the merits of a full certification program. The purpose of this short paper is to seek out and explore what is valuable in certification, at the least to show that the benefits outweigh the disadvantages and at best to identify positive outcomes perhaps not obtainable in other ways. On both sides of the debate on certification there is general agreement on the need for a better human factors perspective and effort in complex aviation systems design. What is at issue is how this is to be promoted. It is incumbent upon opponents of certification to say how else such promotion be enabled. This is an exploratory and philosophical review, not a focused and specific one, and it will draw upon much that is not firmly in the domain of complex aviation systems.

Wilson, John R.↗
NASA NTRS2002

Contact Analog/Compressed Symbology Heading Tape Assessment

A simulation assessed the performance, handling qualities and workload associated with a contact-analog, world-referenced heading tape as implemented on the Comanche Helmet Integrated Display Sight System (HIDSS) when compared with a screen-fixed, compressed heading tape. Six pilots, four active duty Army Aviators and two civilians flew three ADS-33 maneuvers and a traffic pattern in the Ames Vertical Motion Simulation facility. Small, but statistically significant advantages were found for the compressed symbology for handling qualities, workload, and some of the performance measures. It should be noted however that the level of performance and handling qualities for both symbology sets fell within the acceptable tolerance levels. Both symbology sets yield satisfactory handling qualities and performance in velocity stabilization mode and adequate handling qualities in the automatic flight control mode. Pilot comments about the contact analog symbology highlighted the lack of useful rate of change information in the heading tape and "blurring" due to the rapid movement of the heading tape. These issues warrant further study. Care must be taken in interpreting the operational significance of these results. The symbology sets yielded categorically similar data, i.e., acceptable handling qualities and adequate performance, so while the results point to the need for further study, their operational significance has yet to be determined.

Shively, R. Jay↗
NASA NTRS2018

Giving the Public a Perspective into Unmanned Aircraft Systems' Operations

NASA is currently engaged in research to safely enable large-scale commercial applications of small Unmanned Aerial Systems (UAS) in low altitude airspace. This research effort, referred to as UAS Traffic Management (UTM), encompasses the concepts and technologies needed to accommodate the projected demand of UAS operating in the national airspace. One aspect related to the successful implementation of UTM in the future is public acceptance. Transparency will heavily influence this acceptance, and a public portal will provide much of that transparency through ease of access to information about the operations - mainly who, why, and where such operations are taking place. Related concerns to the public are individual privacy, security, and accountability of the operators. Providing the aforementioned information about operations can mitigate these concerns, but a balance will have to be achieved between the need for transparency from the public and the privacy of the operators. The proper balance and the needs of the various UTM stakeholders with regard to information access will be explored through the development and testing of a public portal as part of NASA's Technical Capability 3 (TCL 3) demonstration. Additionally, various approaches to the display of information and user interfaces will be surveyed through the development of a public portal by multiple UTM industry partners across different test sites.

UAS↗
NASA NTRS1980

Design, fabrication and testing of a dual catalyst ammonia removal system for a urine VCD unit

A three-man capacity catalytic system for the recovery of water from urine was designed, constructed, and tested, it was designed to operate with feed streams containing high concentrations of urine vapor and only 5 to 7% of oxygen for the oxidation of ammonia and volatile organic vapor.It can operate either in a flow-through or a recycle mode and is capable of accepting the urine vapor produced by a vapor compression distillation evaporator. Testing consisted of short preliminary and optimization test, an endurance test of 74 hours continuous operation, and recycle tests using both air and oxygen. The system was designed for a urine processing rate of 0.86 liters/hr; however, it was tested at rates up to 1.2 liter/hr. Untreated urine evaporated by an electrically heated evaporator was used. The quality of the recovered water meets the U.S. Drinking Water Standards, with the exception of a low pH. Accumulation of solids in the urine sludge is reduced to approximately 65% of the anticipated value.

Budinikas, P.↗
NASA NTRSDate not supplied

ATTRACTOR: Toward Trustworthy and Trusted Autonomous Systems

The question of what it means and what it takes for an autonomous system to consider another autonomous system justifiably trustworthy must be addressed by all who seek to integrate intelligent machine agents into real-world operations. A satisfactory answer to this question is an essential component in accepting autonomous machine decision-making in safety-critical and time-critical environments, such as aviation. Historically, simulation platforms for test and evaluation of complex systems have proven to be effective in assessing performance and contributing to decisions on the fitness of systems to operate in current general and commercial aviation airspace. Moreover, simulations have informed the definition of safety-critical constraints. However, as machine systems progressively take on responsibilities for decision-making traditionally supplied by humans, simulations require enhancement. Mixed reality simulation that integrates real-world platforms and data or high-fidelity simulation data in a sim-to-flight paradigm provides insight into agent interaction and the rationale behind autonomous agent decision-making as well as the capacity for seamless integrated implementation, testing, and operation of systems. Strong simulation capabilities are especially important in the presence of algorithms that hold great promise in decision-making yet increase the uncertainty in the system. Autonomy Teaming and TRAjectories for Complex Trusted Operational Reliability (ATTRACTOR) is a subproject of NASA’s Convergent Aeronautics Solutions (CAS) Project. ATTRACTOR’s objective is to build a basis for understanding trust and trustworthiness in multi-agent autonomous teams, and thus to inform future certification of safety-critical and time-critical autonomous systems in aviation. Because the concepts of trust and trustworthiness must be addressed in a context, ATTRACTOR has chosen Search and Rescue (SAR) in dynamic and unstructured environments, with emphasis on search, as its design reference mission (DRM). During dynamic planning and execution of trajectory-based operations, autonomous agents determine their trajectories given an assigned mission or missions and call for assistance from an appropriate teammate when needed. This experience along with the attendant human-machine and machine-machine interactions, serve as a platform for developing approaches to identifying and measuring trustworthiness and increasing trust. In this paper, we give an overview of some of ATTRACTOR’s research and development activities, findings, and ongoing work.

ATTRACTOR↗
NASA NTRS2017

Innovative Test Operations to Support Orion and Future Human Rated Missions

This paper describes how the Orion program is implementing new and innovative test approaches and strategies in an evolving development environment. The early flight test spacecraft are evolving in design maturity and complexity requiring significant changes in the ground test operations for each mission. The testing approach for EM-2 is planned to validate innovative Orion production acceptance testing methods to support human exploration missions in the future. Manufacturing and testing at Kennedy Space Center in the Neil Armstrong Operations and Checkout facility will provide a seamless transition directly to the launch site avoiding transportation and checkout of the spacecraft from other locations.

Koenig, William J.↗
NASA NTRS2015

On-Demand Mobility (ODM) Technical Pathway: Enabling Ease of Use and Safety

On-demand mobility (ODM) through aviation refers to the ability to quickly and easily move people or equivalent cargo without delays introduced by lack of, or infrequently, scheduled service. A necessary attribute of ODM is that it be easy to use, requiring a minimum of special training, skills, or workload. Fully-autonomous vehicles would provide the ultimate in ease-of-use (EU) but are currently unproven for safety-critical applications outside of a few, situationally constrained applications (e.g. automated trains operating in segregated systems). Applied to aviation, the current and near-future state of the art of full-autonomy, may entail undesirable trade-offs such as very conservative operational margins resulting in reduced trip reliability and transportation utility. Furthermore, acceptance by potential users and regulatory authorities will be challenging without confidence in autonomous systems in developed in less critical, but still challenging applications. A question for the aviation community is how we can best develop practical ease-of-use for aircraft that are sized to carry a small number of passengers (e.g. 1-9) or equivalent cargo. Such development is unlikely to be a single event, but rather a managed, evolutionary process where responsibility and authority transitions from human to automation agents as operational experience is gained with increasingly intelligent systems. This talk presents a technology road map being developed at NASA Langley, as part of an overall strategy to foster ODM, for the development of ease-of-use for ODM aviation.

Goodrich, Ken↗
NASA NTRS2017

Integrated Display and Environmental Awareness System - System Architecture Definition

The Integrated Display and Environmental Awareness System (IDEAS) is an interdisciplinary team project focusing on the development of a wearable computer and Head Mounted Display (HMD) based on Commercial-Off-The-Shelf (COTS) components for the specific application and needs of NASA technicians, engineers and astronauts. Wearable computers are on the verge of utilization trials in daily life as well as industrial environments. The first civil and COTS wearable head mounted display systems were introduced just a few years ago and they probed not only technology readiness in terms of performance, endurance, miniaturization, operability and usefulness but also maturity of practice in perspective of a socio-technical context. Although the main technical hurdles such as mass and power were addressed as improvements on the technical side, the usefulness, practicality and social acceptance were often noted on the side of a broad variety of humans' operations. In other words, although the technology made a giant leap, its use and efficiency still looks for the sweet spot. The first IDEAS project started in January 2015 and was concluded in January 2017. The project identified current COTS systems' capability at minimum cost and maximum applicability and brought about important strategic concepts that will serve further IDEAS-like system development.

Wearables↗
NASA NTRS2006

Lunar Regolith Simulant Materials: Recommendations for Standardization, Production, and Usage

Experience gained during the Apollo program demonstrated the need for extensive testing of surface systems in relevant environments, including regolith materials similar to those encountered on the lunar surface. As NASA embarks on a return to the Moon, it is clear that the current lunar sample inventory is not only insufficient to support lunar surface technology and system development, but its scientific value is too great to be consumed by destructive studies. Every effort must be made to utilize standard simulant materials, which will allow developers to reduce the cost, development, and operational risks to surface systems. The Lunar Regolith Simulant Materials Workshop held in Huntsville, AL, on January 24 26, 2005, identified the need for widely accepted standard reference lunar simulant materials to perform research and development of technologies required for lunar operations. The workshop also established a need for a common, traceable, and repeatable process regarding the standardization, characterization, and distribution of lunar simulants. This document presents recommendations for the standardization, production and usage of lunar regolith simulant materials.

Sibille, L.↗