Search NASA⌕ Search

SEARCH · Search NASA

Results for “Padding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Consistent boundary conditions for PDE filter regularization in topology optimization

Abstract Design variables in density-based topology optimization are typically regularized using filtering techniques. In many cases, such as stress optimization, where details at the boundaries are crucially important, the filtering in the vicinity of the design domain boundary needs special attention. One well-known technique, often referred to as “padding,” is to extend the design domain with extra layers of elements to mitigate artificial boundary effects. We discuss an alternative to the padding procedure in the context of PDE filtering. To motivate this augmented PDE filter, we make use of the potential form of the PDE filter which allows us to add penalty terms with a clear physical interpretation. The major advantages of the proposed augmentation compared with the conventional padding is the simplicity of the implementation and the possibility to tune the boundary properties using a scalar parameter. Analytical results in 1D and numerical results in 2D and 3D confirm the suitability of this approach for large-scale topology optimization.

42 ENGINEERING↗

Whole-Body Magnetic Resonance Angiography at 3 Tesla Using a Hybrid Protocol in Patients with Peripheral Arterial Disease

The purpose of this study was to determine the diagnostic performance of 3T whole-body magnetic resonance angiography (WB-MRA) using a hybrid protocol in comparison with a standard protocol in patients with peripheral arterial disease (PAD). In 26 consecutive patients with PAD two different protocols were used for WB-MRA: a standard sequential protocol (n = 13) and a hybrid protocol (n = 13). WB-MRA was performed using a gradient echo sequence, body coil for signal reception, and gadoterate meglumine as contrast agent (0.3 mmol/kg body weight). Two blinded observers evaluated all WB-MRA examinations with regard to presence of stenoses, as well as diagnostic quality and degree of venous contamination in each of the four stations used in WB-MRA. Digital subtraction angiography served as the method of reference. Sensitivity for detecting significant arterial disease (luminal narrowing {>=} 50%) using standard-protocol WB-MRA for the two observers was 0.63 (95%CI: 0.51-0.73) and 0.66 (0.58-0.78). Specificities were 0.94 (0.91-0.97) and 0.96 (0.92-0.98), respectively. In the hybrid protocol WB-MRA sensitivities were 0.75 (0.64-0.84) and 0.70 (0.58-0.8), respectively. Specificities were 0.93 (0.88-0.96) and 0.95 (0.91-0.97). Interobserver agreement was good using both the standard and the hybrid protocol, with {kappa} = 0.62 (0.44-0.67) and {kappa} = 0.70 (0.59-0.79), respectively. WB-MRA quality scores were significantly higher in the lower leg using the hybrid protocol compared to standard protocol (p = 0.003 and p = 0.03, observers 1 and 2). Distal venous contamination scores were significantly lower with the hybrid protocol (p = 0.02 and p = 0.01, observers 1 and 2). In conclusion, hybrid-protocol WB-MRA shows a better diagnostic performance than standard protocol WB-MRA at 3 T in patients with PAD.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Endovascular Therapy Research in Lower Limb Peripheral Arterial Disease Published Over a 5-Year Period: Who is Publishing and Where?

IntroductionPeripheral arterial disease (PAD) is being increasingly managed by endovascular therapies. In this study, we identified the clinical services publishing research as well as the journals of publication over a 5-year period.MethodsTwenty keywords and phrases related to endovascular intervention were identified, and a literature search was performed through the PubMed database from January 2009 to January 2014. Inclusion criteria were English language, study population more than five patients, and matching the keyword search. Eligible studies were collated into a database and classified by journal of publication, PubMed number, article title, publishing clinical service, type of publication, country of origin, and authors.Results825 studies from 114 different journals were identified. 297 papers were excluded. Of the 528 included papers, 204 (39%) were published by Vascular Surgery (VS), 157 (30%) by Interventional Radiology (IR), 101 (19%) by Cardiology, 43 (8%) by Angiology, 6 (1%) by Vascular Medicine, and 17 (3%) from miscellaneous services. 283 (54%) studies originated from Europe, 157 (30%) from North America, 76 (14%) from Asia, 6 from Australia, 3 each from South America and Africa. IR published the most papers on PAD endovascular intervention in Europe with VS second while this trend was reversed in the USA. The 528 papers were published in 98 different journals with retrospective case series (72%), the majority.ConclusionIR continues to play a significant research role in endovascular intervention in PAD, particularly in Europe, and specifically in below the knee intervention, pedal intervention, and drug-eluting technologies.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Multipath Curved Planar Reformations of Peripheral CT Angiography: Diagnostic Accuracy and Time Efficiency

ObjectivesTo compare diagnostic performance and time efficiency between 3D multipath curved planar reformations (mpCPRs) and axial images of CT angiography for the pre-interventional assessment of peripheral arterial disease (PAD), with digital subtraction angiography as the standard of reference.MethodsForty patients (10 females, mean age 72 years), referred to CTA prior to endovascular treatment of PAD, were prospectively included and underwent peripheral CT angiography. A semiautomated toolbox was used to render mpCPRs. Twenty-one arterial segments were defined in each leg; for each segment, the presence of stenosis > 70% was assessed on mpCPRs and axial images by two readers, independently, with digital subtraction angiography as gold standard.ResultsBoth readers reached lower sensitivity (Reader 1: 91 vs. 94%, p = 0.08; Reader 2: 89 vs. 93%, p = 0.03) but significantly higher specificity (Reader 1: 94 vs. 89%, p < 0.01; Reader 2: 96 vs. 95%, p = 0.01) with mpCPRs than with axial images. Reader 1 achieved significantly higher accuracy with mpCPRs (93 vs. 91%, p = 0.02), and Reader 2 had similar overall accuracy in both evaluations (94 vs. 94%, p = 0.96). Both readers read mpCPRs significantly faster than axial images (Reader 1: 5′45″ based on mpCPRs vs. 7′40″ based on axial images; Reader 2: 4′41″ based on mpCPRs vs. 6′57″ based on axial images; p < 0.01).ConclusionsmpCPRs are a promising 3D reformation technique that facilitates a fast assessment of PAD with high diagnostic accuracy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Numerical Simulation of Multiphase Magnetohydrodynamic Flow and Deformation of Electrolyte–Metal Interface in Aluminum Electrolysis Cells

A computational fluid dynamics based multiphase magnetohydrodynamic (MHD) flow model for simulating the melt flow and bath–metal interface deformation in realistic aluminum reduction cells is presented. The model accounts for the complex physics of the MHD problem in aluminum reduction cells by coupling two immiscible fluids, electromagnetic field, Lorentz force, flow turbulence, and complex cell geometry with large length scale. Especially, the deformation of bath–metal interface is tracked directly in the simulation, and the condition of constant anode–cathode distance (ACD) is maintained by moving anode bottom dynamically with the deforming bath–metal interface. The metal pad deformation and melt flow predicted by the current model are compared to the predictions using a simplified model where the bath–metal interface is assumed flat. The effects of the induced electric current due to fluid flow and the magnetic field due to the interior cell current on the metal pad deformation and melt flow are investigated. The presented model extends the conventional simplified box model by including detailed cell geometry such as the ledge profile and all channels (side, central, and cross-channels). The simulations show the model sensitivity to different side ledge profiles and the cross-channel width by comparing the predicted melt flow and metal pad heaving. In addition, the model dependencies upon the reduction cell operation conditions such as ACD, current distribution on cathode surface and open/closed channel top, are discussed.

42 ENGINEERING↗

Is There a Safety Concern for Drug-Coated Balloons in Peripheral Arterial Disease?

Purpose of Review: Drug-coated balloons (DEB) and drug-eluting stents (DES) emerged as a tool to aid in lowering the rates of neointimal hyperplasia and target lesion restenosis following endovascular peripheral arterial disease (PAD) interventions. Recent Findings: Although the initial trials comparing these devices with non-drug balloons and stents showed favorable results, more recent data raised concerns regarding the mid to long-term safety of these devices. Summary: In this review, we will discuss the evolution of endovascular therapy for PAD, with highlights regarding the recent debates on the long-term safety of the drug-coated devices for treatment of PAD.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Interleukin-22 receptor 1 upregulation and activation in hypoxic endothelial cells improves perfusion recovery in experimental peripheral arterial disease

Highlights: • Interleukin-22 and its receptor (IL22R1) are upregulated after hindlimb ischemia. • Loss of IL-22 by mAb reduced angiogenesis. • IL-22 overexpression improved angiogenesis after hindlimb ischemia. Inflammation induced by muscle ischemia is involved in tissue repair and perfusion recovery in peripheral arterial disease (PAD) patients. Interleukin (IL)-22 is an inflammatory cytokine discovered in recent years and shows versatile functions; however, its role in PAD remains unknown. Here, we test whether IL-22 and its receptors are involved in angiogenesis in experimental PAD.

60 APPLIED LIFE SCIENCES↗

Capacitively coupled pickup in MCP-based photodetectors using a conductive metallic anode

We have designed and tested a robust 20×20 cm 2 thin metal film internal anode capacitively coupled to an external array of signal pads or micro-strips for use in fast microchannel plate photodetectors. The internal anode, in this case a 10 nm-thick NiCr film deposited on a 96% pure Al 2 O 3 3 mm-thick ceramic plate and connected to HV ground, provides the return path for the electron cascade charge. The multi-channel pickup array consists of a printed-circuit card or glass plate with metal signal pickups on one side and the signal ground plane on the other. The pickup can be put in close proximity to the bottom outer surface of the sealed photodetector, with no electrical connections through the photodetector hermetic vacuum package other than a single ground connection to the internal anode. Two pickup patterns were tested using a small commercial MCP-PMT as the signal source: 1) parallel 50 Ω 25-cm-long micro-strips with an analog bandwidth of 1.5 GHz, and 2) a 20×20 cm 2 array of 2-dimensional square ‘pads’ with sides of 1.27 cm or 2.54 cm. The rise-time of the fast input pulse is maintained for both pickup patterns. For the pad pattern, we observe 80% of the directly coupled amplitude. For the strip pattern we measure 34% of the directly coupled amplitude on the central strip of a broadened signal. The physical decoupling of the photodetector from the pickup pattern allows easy customization for different applications while maintaining high analog bandwidth.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A linear array of position-sensitive virtual Frisch-grid CdZnTe for low-energy gamma rays

Large-area arrays of position-sensitive virtual Frisch-grid CdZnTe (CZT) detectors with enhanced energy resolution and high efficiency have been proposed for spectroscopy and imaging of gamma-ray sources. We present the design and test results of a linear array of such detectors optimized for use in handheld instruments. There are several application areas for such detectors including uranium enrichment measurements, storage monitoring, dosimetry and other nuclear safeguards related tasks. The array configuration provides a large area with minimum number of readout channels, which potentially allows the developers to avoid using ASIC-based readout electronics by substituting it with hybrid preamplifiers followed by digitizers. The array prototype consists of 6 5 x 7 x 25 mm 3 CZT detectors side-oriented with respect to the source to achieve the maximum area. Each detector is furnished with 5 mm-wide charge-sensing pads placed near the anode. As an option, the pads can be grouped together to reduce the number of readout channels. The same can be done with the cathodes. The pads signals are converted into X–Y coordinates and combined with the cathode signals (for the Z coordinates) to give 3D positional information of each interaction point. This information is used to correct the response non-uniformity caused by material inhomogeneity, which allows the developers to use standard grade (unselected) CZT crystals, while retaining high spectroscopic performance.

3D position-sensitive virtual Frisch-grid detector↗

Resistive AC-Coupled Silicon Detectors: principles of operation and first results from a combined analysis of beam test and laser data

This paper presents the principles of operation of Resistive AC-Coupled Silicon Detectors (RSDs) and measurements of the temporal and spatial resolutions using a combined analysis of laser and beam test data. RSDs are a new type of n-in-p silicon sensor based on the Low-Gain Avalanche Diode (LGAD) technology, where the n+ implant has been designed to be resistive, and the read-out is obtained via AC-coupling. The truly innovative feature of RSD is that the signal generated by an impinging particle is shared isotropically among multiple read-out pads without the need for floating electrodes or an external magnetic field. Careful tuning of the coupling oxide thickness and the n+ doping profile is at the basis of the successful functioning of this device. Several RSD matrices with different pad width-pitch geometries have been extensively tested with a laser setup in the Laboratory for Innovative Silicon Sensors in Torino, while a smaller set of devices have been tested at the Fermilab Test Beam Facility with a 120 GeV/c proton beam. The measured spatial resolution ranges between 2.5μm for 70–100 pad-pitch geometry and 17μm with 200–500 matrices, a factor of 10 better than what is achievable in binary read-out (bin size/12). Beam test data show a temporal resolution of ~40ps for 200 μm pitch devices, in line with the best performances of LGAD sensors at the same gain.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Single channel PICOSEC Micromegas detector with improved time resolution

This paper presents design guidelines and the experimental verification of a single-channel PICOSEC Micromegas (MM) detector with an improved time resolution. The design encompasses the detector board, vessel, auxiliary mechanical parts, and electrical connectivity for high voltage (HV) and signals, focusing on improving the stability, reducing noise, and ensuring signal integrity to optimize timing performance. A notable feature is the simple and fast reassembly procedure, facilitating quick replacement of the detector internal components that allows for an efficient measurement strategy involving different detector components. The paper also examines the influence of parasitic capacitance and inductance on the output signal integrity. To validate the design, a prototype assembly and three interchangeable detector boards with varying readout pad diameters were manufactured. Detectors were initially tested in the laboratory. Finally, the timing performance of the detectors with different pad sizes was verified using 150 GeV muons. Notably, a record time resolution for a PICOSEC Micromegas detector technology with a CsI photocathode of 12.5 ± 0.8 ps was achieved for a detector with 10 mm diameter readout pad size.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Compound- and sex-specific effects on programming of energy and immune homeostasis in adult C57BL/6JxFVB mice after perinatal TCDD and PCB 153

Early life exposure to endocrine disrupting compounds has been linked to chronic diseases later in life, like obesity and related metabolic disorders. We exposed C57BL/6JxFVB hybrid mice to the aryl hydrocarbon receptor agonist 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) and the constitutive androstane receptor/pregnane X receptor agonist polychlorinated biphenyl 153 (PCB 153) in an experimental design relevant for human exposure. Exposure occurred during gestation and lactation via maternal feed to a wide dose range (TCDD: 10–10,000 pg/kg body weight/day; PCB 153: 0.09–1406 μg/kg body weight/d). Then exposure was ceased and offspring were followed up to 1 year of age. Metabolic parameters like body weight, fat pad weights, glucose tolerance, endocrine serum profile, and neurobehavioral and immunological parameters were determined. Body weight was transiently affected by both compounds throughout the follow-up. TCDD-exposed males showed decreased fat pad and spleen weights and an increase in IL-4 production of splenic immune cells. In contrast, females showed increased fat pad weights and production of IFNγ. PCB 153-exposed males showed an increase in glucose, whereas females showed an increase in glucagon, a decrease in pancreas weight, and an increase in thymus weight. In conclusion, early life exposure to TCDD appears to affect programming of energy and immune homeostasis in offspring, whereas the effects of perinatal PCB 153 were mainly on programming of glucose homeostasis. Both compounds act sex-specifically. Lowest derived BMDLs (lower bounds of the (two sided) 90%-confidence interval for the benchmark dose) for both compounds are not lower than current tolerable daily intakes. - Highlights: • Early life exposure to TCDD affects programming of energy and immune homeostasis. • Early life exposure to PCB 153 affects programming of energy homeostasis. • Both compounds act sex-specifically. • Lowest derived BMDLs for both TCDD and PCB 153 are not lower than current tolerable daily intakes.

60 APPLIED LIFE SCIENCES↗

Exploring Anomalous Photoelectron Angular Distributions in the Photoelectron Spectra of Gd 3 O 3 – : Study of Gd 3 O 2 – and Gd 3 O 3 – Using Photoelectron Spectroscopy and Density Functional Theory Calculations

Anion photoelectron (PE) spectra of lanthanide oxide clusters obtained previously have exhibited anomalous photoelectron angular distributions which were attributed to strong PE–valence electron (PEVE) interactions. Here, to further explore this effect, we have obtained the PE spectra of Gd 3 O 2 – and Gd 3 O 3 – , two clusters that have similarly complex electronic structures but contrasting symmetries. The spectra exhibit manifolds of detachment transitions at similar binding energies in a 0.5 eV window of energy. The electron affinity of Gd 3 O 2 is measured to be 1.29 ± 0.05 eV, and that of Gd 3 O 3 is 1.31 ± 0.05 eV. As seen in previous studies on lanthanide oxide cluster anions in lower than conventional oxidation states, transitions in spectra obtained lower photon energies are more congested than those obtained with higher photon energy, a signature of strong PEVE interactions. While the detachment transitions have predominantly parallel photoelectron angular distributions (PAD), the PAD varies across the manifold of transitions in the PE spectrum of Gd 3 O 3 – in a way that suggests four different subgroups of transitions. Results of calculations on Gd 3 O 2 – suggest kite or V-shape structures with antiferromagnetic coupling between one of the 4f 7 subshells with the two others. Calculations on Gd 3 O 3 – more definitively point to ring structures with a nearly isoenergetic ferromagnetically coupled high spin (24-tet) state and a dectet state in which one of the 4f 7 subshells is antiferromagnetically coupled with the other two. Taking these results as qualitative, we propose that strong mixing between the unperturbed states predicted computationally leads to overlapping transitions with different PADs.

anions↗

Quantifying the Role of EMIC Wave Scattering During the 27 February 2014 Storm by RAM–SCB Simulations

Electromagnetic Ion Cyclotron (EMIC) wave scattering has been proved to be responsible for the fast loss of both radiation belt (RB) electrons and ring current (RC) protons. However, its role in the concurrent dropout of these two co–located populations remains to be quantified. In this work, we study the effect of EMIC wave scattering on both populations during the 27 February 2014 storm by employing the global physics–based RAM–SCB model. Throughout this storm event, MeV RB electrons and 100s keV RC protons experienced simultaneous dropout following the occurrence of intense EMIC waves. By implementing data–driven initial and boundary conditions, we perform simulations for both populations through the interplay with EMIC waves and compare them against Van Allen Probes observations. Notably, the results indicate that by including EMIC wave scattering loss, especially by the He–band EMIC waves, the model aligns closely with data for both populations. Additionally, we investigate the simulated pitch angle distributions (PADs) for both populations. Including EMIC wave scattering in our model predicts a 90° peaked PAD for electrons with stronger losses at lower pitch angles, while protons exhibit an isotropic PAD with enhanced losses at pitch angles above 40°. Furthermore, our model predicts considerable precipitation of both particle populations, predominantly confined to the afternoon to midnight sector (12 hr < MLT < 24 hr) during the storm's main phase, corresponding closely with the presence of EMIC waves.

79 ASTRONOMY AND ASTROPHYSICS↗

Retrieving transient conformational molecular structure information from inner-shell photoionization of laser-aligned molecules

We discuss a scheme to retrieve transient conformational molecular structure information using photoelectron angular distributions (PADs) that have averaged over partial alignments of isolated molecules. The photoelectron is pulled out from a localized inner-shell molecular orbital by an X-ray photon. We show that a transient change in the atomic positions from their equilibrium will lead to a sensitive change in the alignment-averaged PADs, which can be measured and used to retrieve the former. Exploiting the experimental convenience of changing the photon polarization direction, we show that it is advantageous to use PADs obtained from multiple photon polarization directions. Lastly, a simple single-scattering model is proposed and benchmarked to describe the photoionization process and to do the retrieval using a multiple-parameter fitting method.

74 ATOMIC AND MOLECULAR PHYSICS↗

Isolation blocking voltage of nitrogen ion-implanted AlGaN/GaN high electron mobility transistor structure

Nitrogen ion-implanted AlGaN/GaN high electron mobility transistor structures showed an isolation blocking voltage of 900 V with a leakage current at 1 A/mm across an implanted isolation-gap of 10 m between two Ohmic pads. The effect of implanted gap distance 1.7, 5, or 10 m between two Ohmic contact pads was evaluated. The isolation current density was determined to be solely dependent on the applied field between the contact pads. A model using a combination of resistive current and Poole Frenkel current is consistent with the experimental data. The resistance of the isolation implantation region significantly decreased after the sample was annealed at temperatures above 600 C.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Large-sized out-of-plane stretchable electrodes based on poly-dimethylsiloxane substrate

This paper describes a reliable fabrication method of stretchable electrodes based on poly-dimethylsiloxane (PDMS) substrate. The electrode traces and pads were formed in out-of-plane structures to improve the flexibility and stretchability of the electrode array. The suspended traces and pads were attached to the PDMS substrate via parylene posts that were located nearby the traces and under the pads. As only conventional micro-electro-mechanical systems techniques were used, the out-of-plane electrode arrays were clearly fabricated at wafer level with high yield and reliability. Also, bi-layer out-of-plane electrodes were formed through additional fabrication steps in addition to mono-layer out-of-plane electrodes. The mechanical characteristics such as the stretchability, flexibility, and foldability of the fabricated electrodes were evaluated, resulting in stable electrical connection of the metal traces with up to 32.4% strain and up to 360° twist angle over 25 mm. The durability in stretched condition was validated by cyclic stretch test with 10% and 20% strain, resulting in electrical disconnection at 8600 cycles when subjected to 20% strain. From these results, it is concluded that the proposed fabrication method produced highly reliable, out-of-plane and stretchable electrodes, which would be used in various flexible and stretchable electronics applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of porosity on thermophysical properties of a composite

In many modern information systems, the heat generated during the operation of electronic devices is usually dissipated by heat-conductive pads between the casing of the respective equipment and a massive base (platform). For newly developed pads, the promising materials are composites on the basis of various types of silicone rubber. At the same time, during the production of the pads without a vacuum setup, the material can contain air bubbles, which causes the porosity potentially negative for the thermal properties of the material. This work studies the thermal conductivity depending on the degree of silicone matrix filling by copper particles, introduced to improve thermal conductivity, and by air bubbles that are considered as reinforcing inclusions.

42 ENGINEERING↗