Search NASA⌕ Search

SEARCH · Search NASA

Results for “Performance Indicators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Development and evaluation of a list mode neutron coincidence collar for spatial response measurements of fresh fuel assemblies

A traditional safeguards neutron coincidence counting system, the Neutron Coincidence Collar, has been modified to incorporate individual preamplifiers on each of its 18 3He tubes in active interrogation mode. When used with list mode data acquisition (LMDA) and analysis, a signal from each 3He tube can be recorded and analyzed to allow a spatial response measurement to be performed on an item based on count rate and 3He tube location within the system. The ultimate goal of this project is to demonstrate the capabilities of a list mode response matrix for the nondestructive assay of fresh nuclear fuel assemblies. To enable partial defect detection of fuel pin locations and absences within an assembly, the project aims to extend well-established correlated neutron analysis techniques on a preexisting Neutron Coincidence Collar by extracting a greater number of useful signatures from the system than are currently generated. LMDA, combined with the addition of multiple preamplifiers, facilitates this capability by increasing the number of simultaneous signals that can be measured; this allows an in-depth analysis of neutron coincidence events to determine a fissioning item’s location based on the measured doubles count rate in various channel logic coincidence combinations. All of this can be done from a single measurement pulse train in offline analysis, which is the major benefit provided by LMDA. Through various stages of development and testing, a Mirion Technologies model JCC-71 Neutron Coincidence Collar has been successfully retrofit with modern electronics designed in-house at Oak Ridge National Laboratory, matching preexisting JAB-01 electronics performance, while maintaining the original system footprint. This paper presents these various stages of development and experimental evaluation of the proof of concept system.

Moore, Angela S.↗
DOE OSTI2024

Asynchronous GPU-based DEM solver embedded in commercial CFD software with polyhedral mesh support

A novel graphical processing unit-based discrete element method solver is introduced to improve stability, performance, and provide seamless integration into commercial or open-source computational fluid dynamics software. A key innovation is eliminating a need for network communication between solvers, which was previously required for cross-platform coupling. This is accomplished by a direct coupling method that employs dynamic-linked libraries. Furthermore, the solver optimizes memory usage by streamlining the particle-cell search algorithm by eliminating the cells' searching grid. This ensures the solver is compatible with a wide range of mesh types, providing high geometric flexibility. The approach simplifies the simulation process by directly incorporating computational fluid dynamics mesh information into the discrete element method solver. The performance analysis indicates about sixteen times boost in computational speed compared to benchmark central processing unit-based solvers. Finally, the solver's compatibility with polyhedral meshes, a vital advantage for complex geometries, is tested against a referenced study regarding the simulation of an immersed-tube fluidized bed.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

A buffering heat exchanger/thermal energy storage system for desalination applications

A buffering heat exchanger/thermal energy storage (BHXTES) system was designed using a fast-response phase-change material/graphite foam (PCM/GF) medium for desalination and potentially other industrial applications. Unlike a store-now-and-use-later TES system, this study focused on developing a dynamically balanced, continuously used, system that optimized three functions. A lab-scale prototype was designed and fabricated with a PureTemp 151/GF storage medium. The experimental data showed excellent thermal performance repeatability indicating minimal effects of PCM expansion and contraction on the GF as well as negligible PCM redistribution effects. The experimental data also served as a validation of the numerical model of the BHXTES system, after which optimization of the BHXTES system was conducted through numerical simulations for both PureTemp 151/GF and solar salt/GF as the storage medium. The results show that, with a Therminol 55 heat transfer fluid, continuous operation of the system can be realized with a solar energy source through cycles of 8-h changing for desalination and energy storage with the supplied heat followed by 16-h discharging for desalination with the stored energy. As a result, the working fluid outlet temperatures are generally in the ranges of approximately 128–160 °C for a PureTemp 151/GF medium and 198–220 °C for a solar salt/GF medium.

Buffering↗
DOE OSTI2022

A review of computing-based automated fault detection and diagnosis of heating, ventilation and air conditioning systems

We report faults in Heating, Ventilation, and Air Conditioning (HVAC) systems of buildings result in significant energy waste in building operation. With fast-growing sensing data availability and advancement in computing, computational modeling has demonstrated strong capability to detect and diagnose HVAC system faults, hence, ensuring efficient building operation. This paper comprehensively reviews the state-of-the-art computing-based fault detection and diagnosis (FDD) for HVAC systems. Overall, the reviewed computing-based FDD methods are classified as two major approaches: knowledge-based and data-driven approaches. We then identify multiple important topics, including data availability, training data size, data quality, approach generality, capability, interpretability, and required modeling efforts, along with corresponding metrics to summarize the most updated FDD development. Generally, the knowledge-based approaches are further divided as physics-based modeling, Diagnostic Bayesian Network, and performance indicator-based methods while data-driven approaches include supervised learning, unsupervised learning, and regression and statistics-based methods. State-of-the-art FDD development, remaining challenges, and future research directions are further discussed to push forward FDD in practice. Availability of fault data, capability of existing methods to deal with complex fault situations (such as simultaneous faults), modeling interpretability for data-driven methods, and required engineering efforts for physics-based methods are identified as remaining challenges in FDD development. Improving modeling fidelity and reducing modeling efforts are essential for applying physics-based methods in real buildings. Meanwhile, addressing fault data availability, increasing algorithm adaptability, and handling multiple faults are essential to further enhance the applicability of data-driven FDD approaches.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Salt-flux synthesis, crystal structure and theoretical characterization of Rb 0.74 Ga 6.62 Ti 0·38 O 11

Here single crystals of Rb 0.74 Ga 6.62 Ti 0·38 O 11 (RGTO) were grown from a mixed RbCl–RbF flux at 850 °C. The compound crystallizes in the RbGa 7 O 11 structure type, which is reminiscent of the hollandite and β-Ga 2 O 3 structure types. RGTO crystallizes in the monoclinic space group P2/m with lattice parameters a = 8.3355 (8) Å, b = 3.0286 (3) Å, c = 9.5028 (9) Å, and β = 114.620 (3)°. The crystal structure of RGTO is comprised of GaO 6 and mixed (Ga/Ti)O 6 octahedra and GaO 4 tetrahedra connected in a complex three-dimensional, anionic framework exhibiting eight-sided channels that are occupied by disordered Rb cations required for charge balance. First-principles calculations in the form of density functional theory were performed, which indicated the complex to be a charge transfer semiconductor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

TeraChem Cloud: A High-Performance Computing Service for Scalable Distributed GPU-Accelerated Electronic Structure Calculations

The encapsulation and commoditization of electronic structure arise naturally as interoperability, and the use of nontraditional compute resources (e.g., new hardware accelerators, cloud computing) remains important for the computational chemistry community. Here, we present TERACHEM CLOUD, a high-performance computing service (HPCS) that offers on-demand electronic structure calculations on both traditional HPC clusters and cloud-based hardware. The framework is designed using off-the-shelf web technologies and containerization to be extremely scalable and portable. Within the HPCS model, users can quickly develop new methods and algorithms in an interactive environment on their laptop while allowing TERACHEM CLOUD to distribute ab initio calculations across all available resources. This approach greatly increases the accessibility of hardware accelerators such as graphics processing units (GPUs) and flexibility for the development of new methods as additional electronic structure packages are integrated into the framework as alternative backends. Cost-performance analysis indicates that traditional nodes are the most cost-effective long-term solution, but commercial cloud providers offer cutting-edge hardware with competitive rates for short-term large-scale calculations. We demonstrate the power of the TERACHEM CLOUD framework by carrying out several showcase calculations, including the generation of 300,000 density functional theory energy and gradient evaluations on medium-sized organic molecules and reproducing 300 fs of nonadiabatic dynamics on the B800-B850 antenna complex in LH2, with the latter demonstration using over 50 Tesla V100 GPUs in a commercial cloud environment in 8 h for approximately $1250.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Radiation-Induced Interfacial Hydroxyl Transformation on Boehmite and Gibbsite Basal Surfaces

Understanding the radiolytic reactivity of aluminum oxyhydroxide phases widely present in stored nuclear wastes is essential to develop reliable processing approaches. Recent experiments using vibrational sum frequency generation (VSFG), a surface sensitive technique, have shown that rehydration of γ-irradiated boehmite (010) and gibbsite (001) surfaces does not recover the initial hydroxyl density prior to irradiation. In this study, using density functional theory and nudged elastic band calculations, we examine dehydration and rehydration of these surfaces and attendant proton transfer mechanisms. While dehydration of both surfaces is predicted to be energetically unfavorable, rehydration of boehmite (010) is favorable after overcoming an energy barrier of 0.52 eV that relates to the orientation of surface hydroxyls controlling the hydrogen bonding network of adsorbed water. In the case of gibbsite (001), for which the experimental results suggest that rehydration mainly involves the reformation of interlayer hydroxyls, we found that a two-proton transfer mechanism is more likely than a one-proton transfer mechanism, and that it prevents the reorientation of interlayer hydroxyls into intralayer hydroxyls consistent with experimental VSFG findings. A detailed analysis of the effect of surface hydrogen vacancy on the strength of hydrogen bond interactions was performed, which indicates that H 2 and H 2 O are the energetically most favorable product species to form from radiation-induced surface H and/or OH defects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Mechanistic Study of Lead Adsorption on Activated Carbon

Activated carbon (AC) is a carbonaceous material broadly applied in filters to remove lead (Pb(II)) from drinking water through adsorption. However, the chemical interactions between Pb(II) and the reactive sites on AC or other carbonaceous materials are not well understood, yet. The understanding of the mechanism of Pb(II) adsorption onto AC would allow to optimally design AC-based materials even in the presence of a complex liquid phase. Here in this paper, the interaction between Pb(II) and functional groups on AC was investigated at the molecular scale to help identifying the chemical reactions at the solid-liquid interface. Spectroscopic analyses and chemical quantum calculations were performed and indicated the formation of monodentate mononuclear Pb(II)-phenol and bidentate mononuclear Pb(II)-carboxyl complexes on AC. Competitive adsorption behavior was observed between Pb(II) and calcium (Ca(II)) because of their similar adsorption configurations on AC. In contrast, anions, including sulfate and phosphate, were observed to enhance Pb(II) adsorption on AC by forming ternary complexes. On the basis of these observations, a new surface complexation model of Pb(II) adsorption onto AC was formulated and validated with batch tests. Overall, this work presents a new set of chemical reactions at the solid-liquid interface between Pb(II) and AC under various conditions of interest for the application of AC or other carbonaceous materials in water treatment.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Cell-Format-Dependent Mechanical Damage in Silicon Anodes

Strong binders can be counterproductive for silicon anodes. Here, we show that stresses from cycling Si-based electrodes can cause permanent stretching and wrinkling of the current collector. Furthermore, this deformation damages the electrode coating and accelerates cell aging due to the inactivation of Si domains and facilitation of Li plating. Interestingly, we demonstrate that the formation of wrinkles is size-dependent, being present in pouch cells but absent from coin cells. This size-dependent performance decay indicates that, in extreme cases, testing outcomes are highly dependent on scale and that the validation of battery materials may require testing at larger cell formats.

25 ENERGY STORAGE↗
DOE OSTI2020

Back-Surface Passivation of CdTe Solar Cells Using Solution-Processed Oxidized Aluminum

Although back-surface passivation plays an important role in high-efficiency photovoltaics, it has not yet been definitively demonstrated for CdTe. Here, we present a solution-based process, which achieves passivation and improved electrical performance when very small amounts of oxidized Al 3+ species are deposited at the back surface of CdTe devices. The open circuit voltage (V oc ) is increased and the fill factor (FF) and photoconversion efficiency (PCE) are optimized when the total amount added corresponds to ~1 monolayer, suggesting that the passivation is surface specific. Addition of further Al 3+ species, present in a sparse alumina-like layer, causes the FF and PCE to drop as the interface layer becomes blocking to current flow. The optimized deposit increases the average baseline PCE for both Cu-free devices and devices where Cu is present as a dopant. The greatest improvement is found when the Al 3+ species are deposited prior to the CdCl 2 activation step and Cu is employed. In this case, the best-cell efficiency was improved from 12.6 to 14.4%. Furthermore, time-resolved photoluminescence measurements at the back surface and quantum efficiency measurements performed at the maximum power point indicate that the performance enhancement is due to a reduction in the interface recombination current at the back surface.

14 SOLAR ENERGY↗
DOE OSTI2026

Hourly PM 2.5 Estimates across California from 2018 to 2023

This study presents a new data set of hourly PM 2.5 concentrations across California from 2018 to 2023 at a three-kilometer resolution. This data set was developed by assimilating observations from PurpleAir and the U.S. EPA Air Quality System monitors into wildfire smoke forecasts from the High-Resolution Rapid Refresh Smoke (HRRR-Smoke) model using the Gridpoint Statistical Interpolation (GSI) three-dimensional variational data assimilation framework. Archived forecasts of modeled wildfire smoke PM 2.5 from HRRR-Smoke create the background field for assimilation, which is then corrected using surface observations of total PM 2.5 . The resulting reanalysis from GSI provides an estimate of total PM 2.5 that minimizes error from both the observational and the model data. Validation results indicate strong performance, with monthly R 2 values ranging from 0.73 to 0.91 across the six-year data set, comparable to other PM 2.5 data sets. Case studies are presented for three major fire events, the 2018 Camp Fire, 2019 Kincade Fire, and 2020 Lightning Complex Fires to demonstrate the data set’s fidelity in resolving plume dynamics and local exposure patterns. Root-mean-squared error averaged over each month scales with average PM 2.5 concentrations, resulting in a low error under typical conditions but higher absolute errors during extreme smoke events. This is the first long-term, hourly PM 2.5 data set of its kind for California and enables the generation of subdaily exposure metrics, such as peak hourly concentrations, exceedance durations, and time-of-day exposure peaks. The novelty and strong validation of this data set make it a compelling resource for future studies on the impact and significance of subdaily PM 2.5 exposure.

PM2.5↗
DOE OSTI2019

Reward-Based Participant Management for Crowdsourcing Rainfall Monitoring: An Agent-Based Model Simulation

Crowdsourcing incorporates common citizens as rich sources of data and is promising for environmental monitoring. Here, we propose and test the idea of incorporating incentives to crowdsourcing management for rainfall monitoring. In particular, we model the allocation of incentives (quantitatively measurable and limited rewards) among crowdsourcing participants for a theoretical rainfall monitoring case. For this purpose, we develop an integrated model comprising a reward allocation component to represent the decision-making process of a central manager, an agent-based model to simulate the interactions between the manager and participants, and a rainfall simulation model to evaluate the effectiveness of various reward allocation policies. We simulate six reward allocation policies of varying levels of administrative cost, and consideration of participant and rainfall spatial heterogeneities. The findings indicate the performance of each policy to improve with the reward budget and their spatial uniformity. Among the six policies tested, we discover that the participant density weighted maximum participation policy yields the most accurate estimation of rainfall intensity due to its more explicit consideration of the spatial distribution of participants; however, this policy associates with a high administrative cost. This highlights the trade-off between performance and cost in designing effective reward allocation policies. This paper provides a physical and behavior simulation modeling tool to study the feasibility and complexity of reward-based participant management for crowdsourcing rainfall monitoring. The proposed crowdsourcing method is beneficial for a wide range of applications that require rainfall data with fine resolution, such as storm water management and water availability and biomass assessment for food and energy crops.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

How May the Choice of Downscaling Techniques and Meteorological Reference Observations Affect Future Hydroclimate Projections?

Abstract We present an intercomparison of a suite of high‐resolution downscaled climate projections based on a six‐member General Circulation Model (GCM) ensemble from Coupled Models Intercomparison Project (CMIP6). The CMIP6 GCMs have been downscaled using dynamical and statistical downscaling techniques based on two meteorological reference observations over the conterminous United States. We use the regional climate model, RegCM4, for dynamical downscaling, double bias correction constructed analogs method for statistical downscaling, and Daymet and Livneh datasets as the reference observations for statistical training and bias‐correction. We evaluate the performances of downscaled data in both historical and future periods under the SSP585 scenario. While dynamical downscaling improves the simulation of some performance evaluation indices, it adds an extra bias in others, highlighting the need for statistical correction before its use in impact assessments. Downscaled datasets after bias‐correction compare exceptionally well with observations. However, the choice of downscaling techniques and the underlying reference observations influence the hydroclimate characteristics of downscaled data. For instance, the statistical downscaling generally preserves the GCMs climate change signal but overestimates the frequency of hot extremes. Similarly, simulated future changes are sensitive to the choice of reference observations, particularly for precipitation extremes that exhibit a higher projected increase in the ensembles trained and/or corrected by Daymet than Livneh. Overall, these results demonstrate that multiple factors, including downscaling techniques and reference observations, can substantially influence the outcome of downscaled climate projections and stress the need for a comprehensive understanding of such method‐based uncertainties.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Self‐Potential Tomography Preconditioned by Particle Swarm Optimization—Application to Monitoring Hyporheic Exchange in a Bedrock River

Abstract A self‐potential (SP) data‐inversion algorithm was developed and tested on an analytical model of electrical‐potential profile data attributed to single and multiple polarized electrical sources. The developed algorithm was then validated by an application to SP‐monitoring field data measured on the floodplain of East Fork Poplar Creek, Oak Ridge, Tennessee, to image electrical sources in areas conducive to preferential flow into the flood plain from the bedrock‐lined riverbed. The algorithm combined stochastic source‐localization by particle‐swarm‐optimization (PSO) of electrical sources characterized by simplified geometries with source tomography by regularized weighted least‐squares minimization of a quadratic objective function. Prior information was incorporated by preconditioning the tomography algorithm by PSO results. Variable percentages of random noise were added to analytical‐model data to evaluate the algorithm performance. Results indicated that true parameters of single‐source models were inverted and approximated with small residual error, whereas inversion of analytical‐model data representing multiple electrical sources accurately approximated the locations of the sources but miscalculated some parameters because of the non‐uniqueness of the inverse‐model solution. Source tomography applied to analytical model data during testing produced a spatially continuous parameter field that identified the locations of point‐scale synthetic dipole sources of electrical current flow with varying degrees of accuracy depending on the prior information incorporated into the tomography. When applied to SP‐monitoring field data, the algorithm imaged electrical sources within a known fault that intersects the bedrock riverbed and flood plain of East Fork Poplar Creek and depicted dynamic electrical conditions attributed to hyporheic exchange.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Regularization via f -Divergence: An Application to Multi-Oxide Spectroscopic Analysis

In this paper, we explore the application of convolutional neural networks (CNNs) for predicting the chemical composition of complex geologic samples in a simulated Martian atmospheric environment. Specifically, we aim to characterize oxide weight percentages (wt.%) of rock samples analyzed by remote Laser-Induced Breakdown Spectroscopy (LIBS), framing the problem as a multi-target regression task . Neural networks trained on LIBS spectra are prone to overfitting due to high spectral complexity, limited labeled data, and measurement noise. While regularization is critical for improving generalization, common methods (e.g., ℓ 2 regularization) impose constraints not directly tied to data distribution properties. We propose a novel regularization method based on a specific ƒ-divergence induced by a graph-based estimator, designed to constrain the distributional discrepancy between predictions and targets. This regularizer serves a dual purpose: (a) mitigating overfitting by enforcing a constraint on the distributional difference between predictions and noisy targets, and (b) acting as an auxiliary loss that penalizes large divergences. To enable backpropagation, we develop a differentiable approximation of this particular ƒ-divergence, making the method feasible for neural networks. Experiments on ChemCam and SuperCam LIBS calibration spectra show that mathematical equation-divergence regularization outperforms or matches standard regularization methods (ℓ 1 , ℓ 2 , dropout) and the classical baseline, partial least squares (PLS). Combining ƒ-divergence regularization with standard regularization yields further performance gains, indicating that distributional regularization is useful in this context giving a promising direction for robust model training in planetary science applications. Source code is publicly available at Klein and Li (2025), https://doi.org/10.11578/dc.20250530.7.

58 GEOSCIENCES↗
DOE OSTI2020

Machine learning Frenkel Hamiltonian parameters to accelerate simulations of exciton dynamics

In this manuscript, we develop multiple machine learning (ML) models to accelerate a scheme for parameterizing site-based models of exciton dynamics from all-atom configurations of condensed phase sexithiophene systems. This scheme encodes the details of a system’s specific molecular morphology in the correlated distributions of model parameters through the analysis of many single-molecule excited-state electronic-structure calculations. These calculations yield excitation energies for each molecule in the system and the network of pair-wise intermolecular electronic couplings. In this work, we demonstrate that the excitation energies can be accurately predicted using a kernel ridge regression (KRR) model with Coulomb matrix featurization. We present two ML models for predicting intermolecular couplings. The first one utilizes a deep neural network and bi-molecular featurization to predict the coupling directly, which we find to perform poorly. The second one utilizes a KRR model to predict unimolecular transition densities, which can subsequently be analyzed to compute the coupling. We find that the latter approach performs excellently, indicating that an effective, generalizable strategy for predicting simple bimolecular properties is through the indirect application of ML to predict higher-order unimolecular properties. Such an approach necessitates a much smaller feature space and can incorporate the insight of well-established molecular physics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A semi-supervised machine learning detector for physics events in tokamak discharges

Databases of physics events have been used in various fusion research applications, including the development of scaling laws and disruption avoidance algorithms, yet they can be time-consuming and tedious to construct. This paper presents a novel application of the label spreading semi-supervised learning algorithm to accelerate this process by detecting distinct events in a large dataset of discharges, given few manually labeled examples. A high detection accuracy (> 85%) for H-L back transitions and initially rotating locked modes is demonstrated on a dataset of hundreds of discharges from DIII-D with manually identified events for which only 3 discharges are initially labeled by the user. Lower yet reasonable performance (~75%) is also demonstrated for the core radiative collapse, an event with a much lower prevalence in the dataset. Additionally, analysis of the performance sensitivity indicates that the same set of algorithmic parameters is optimal for each event. Furthermore, this suggests that the method can be applied to detect a variety of other events not included in this paper, given that the event is well described by a set of 0D signals robustly available on many discharges. Procedures for analysis of new events are demonstrated, showing automatic event detection with increasing fidelity as the user strategically adds manually labeled examples. Detections on Alcator C-Mod and EAST are also shown, demonstrating the potential for this to be used on a multi-tokamak dataset.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

The role of ion and electron-scale turbulence in setting heat and particle transport in the DIII-D ITER baseline scenario

In this work, the heat and particle transport in a DIII-D ITER Baseline Scenario (IBS) discharge has been investigated using both linear and nonlinear gyrokinetic simulations performed with the CGYRO code [J. Candy et al: Journal Comp. Phys. (2016)].These simulations were used to investigate the role that ion-scale ($k_θp_s$ < 1:0) and electron-scale ($k_θp_s$ > 1:0) turbulence play in determining heat and particle transport in the core of conditions believed to directly extrapolate to ITER operation. This investigation spans over nearly half of the plasma minor radius, from ρ = 0:45 - 0:85. To probe the nature of the transport and turbulence in these conditions and to validate the model against experimental fluxes, scans of $a/L_{T_i}$, $a/L_{T_e}$, and $a/L_n$ were performed at all radial locations. Long wavelength turbulence is found to be dominated by ITG modes with strong non-adiabatic electron effects and appears unable to reproduce ion and electron heat fluxes and electron particle fluxes simultaneously at most radial positions when single parameter scans are performed. To investigate the potential role of short wavelength turbulence, a series of electron-scale simulations are performed that indicate that experimentally relevant levels of electron heat flux could arise at sub-ion scales. Quantitative comparison of the simulated fluxes obtained from ion and electron-scale simulations with experimental levels along with the sensitivity of simulations results to changes in inputs is presented. Through extensive sensitivity scans and comparison with multiple transport channels, this work demonstrates a clear need for self-consistent modification of multiple inputs and suggests multi-scale interactions play a significant role at many of the radial locations studied. The results of this analysis help shape our understanding of the model fidelity needed to predict turbulence and transport reactor-relevant conditions and have important implications for the prediction of future fusion devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗