Search NASA⌕ Search

SEARCH · Search NASA

Results for “Photovoltaic Module”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Characterization and modeling of reverse-bias breakdown in Cu(In,Ga)Se 2 photovoltaic devices

Partial shading of series-connected thin-film photovoltaic modules can force shaded cells into reverse bias, which can cause rapid and irreversible power loss and reduce the practical module lifespan. Unfortunately, this is a common occurrence in field-deployed modules due to the myriad of environmental factors that can result in partial shading. In this work, we identify as-grown nonuniformities in the Cu(In,Ga)Se 2 (CIGS) absorber layers as the points of origin for the damage induced under reverse-bias conditions. The structure and chemistry associated with inclusions and voids in the CIGS films cause these features to act as resistive heating elements in reverse-bias conditions. This localized resistive heating provides the energy required to induce thermal runaway breakdown in the CIGS devices, resulting in damage to charge collection and reduced active area of a device. This mechanism is also described with a robust device model to connect the experimental observations with their physical origins.

14 SOLAR ENERGY↗

Development of coring procedures applied to Si, CdTe, and CIGS solar panels

Most of the research on the performance and degradation of photovoltaic modules is based on macroscale measurements of device parameters such as efficiency, fill factor, open-circuit voltage, and short-circuit current. Our goal is to develop the capabilities to allow us to study the degradation of these parameters in the micro- and nanometer scale and to relate our results to performance parameters. To achieve this objective, the first step is to be able to access small samples from specific areas of the solar panels without changing the properties of the material. In this paper, we describe two coring procedures that we developed and applied to Si, CIGS, and CdTe solar panels. In the first procedure, we cored full samples, whereas in the second we performed a partial coring that keeps the tempered glass intact. The cored samples were analyzed by different analytical techniques before and after coring, at the same locations, and no damage during the coring procedure was observed.

14 SOLAR ENERGY↗

Surface albedo spatial variability in North America: Gridded data vs. local measurements

Considering the current booming interest for the large-scale deployment of bifacial photovoltaic modules, the solar industry now requires accurate estimates of broadband surface albedo at high spatial resolution. In this context, the present study evaluates the adequacy and performance over North America of two Moderate Resolution Imaging Spectroradiometer (MODIS) white-sky albedo products (at 500-m and 1-km resolution) and the National Solar Radiation Database (NSRDB) product at 4-km resolution. Two variations of the 500-m MODIS product are also considered: black-sky albedo and all-sky albedo. Albedo observations from 36 radiometric stations during 2011–2015 are analyzed while considering the apparent homogeneity of the surface characteristics over the 4x4 km NSRDB pixel in which they are located. Even at sites where the albedo around the station has been found “homogeneous” in the literature, marked differences are found between the daily observations and the gridded estimates at any spatial resolution. Furthermore, differences in seasonal behavior and between the three different albedo types also impact the accuracy of the albedo estimates, with overtones caused by local specificities and inhomogeneities. All this precludes the desirable evaluation of the local albedo at a specific site of relatively small size compared to its corresponding 4x4-km pixel if only the mean albedo over that pixel is known. Significant discrepancies are also found at snow-impacted sites, most importantly in the case of the NSRDB albedo estimates, which are typically much too high.

14 SOLAR ENERGY↗

Copper iodide nanoparticles as a hole transport layer to CdTe photovoltaics: 5.5 % efficient back-illuminated bifacial CdTe solar cells

We report the role of copper iodide (CuI) nanoparticles (NPs) as a hole transport layer (HTL) in cadmium sulfide/cadmium telluride (CdS/CdTe) photovoltaics. These CuI NPs were prepared using solution processing at room temperature and used to fabricate monofacial and bifacial CdTe solar cells with different back contacts. Using CuI/Au as the back contact, the device efficiency reached to 14.8% with outstanding fill factor (FF) of 79.2%. Replacing the gold (Au) electrode with sputtered transparent indium tin oxide (ITO), a CuI/ITO back contact yielded photoconversion efficiencies (PCEs) of 11.6% and 5.5% under front and back illumination respectively. Bifacial devices (CdTe/ITO) without the CuI NP HTL have an efficiency of 7.0% and 1.0% for front and back illumination, respectively. For CuI/ITO, a current collection of 12.0 mAcm -2 was observed upon back illumination which significantly improved over an ITO-only back contact (5.0 mAcm -2 ). The PCE obtained from back illumination was enhanced when using CuI NPs as the HTL due to the reduced back barrier height, and improved back interface as determined by temperature dependent current vs. voltage characteristics and impedance spectroscopy analysis. The improvement in device performance of the bifacial configuration is a significant step forward toward realizing thin film photovoltaic modules which harvest energy incident on the rear of the module.

36 MATERIALS SCIENCE↗

Fundamentals of Using Cracked Film Lithography to Pattern Transparent Conductive Metal Grids for Photovoltaics

The fundamentals of using cracked film lithography (CFL) to fabricate metal grids for transparent contacts in solar cells were studied. The underlying physics of drying-induced cracks were well-predicted by an empirical correlation relating crack spacing to capillary pressure. CFL is primarily controlled by varying the crack template thickness, which establishes a three-way tradeoff between the areal density of cracks, crack width, and spacing between cracks, which in turn determine final grid transmittance, grid sheet resistance, and the semiconductor resistance for a given solar cell. Since CFL uses a lift-off process, an additional constraint is that the metal thickness must be less than 1/3 of the crack template thickness. Furthermore, the transmittance/grid sheet resistance/wire spacing tradeoffs measured in this work were used to calculate solar cell performance: CFL-patterned grids should outperform screen-printed grids for narrow cells (0.5–2 cm wide) and/or cells with high semiconductor sheet resistance (=100 O/sq), making CFL attractive for monolithically integrated thin-film photovoltaic modules.

14 SOLAR ENERGY↗

Transparent Metal–Organic Framework/Polymer Mixed Matrix Membranes as Water Vapor Barriers

Preventing the permeation of reactive molecules into electronic devices or photovoltaic modules is of significant concern to ensure their life span and reliability. Our report is focused on the formation of highly functioning barrier films based on nanocrystals (NCs) of a water-scavenging metal-organic framework (MOF) and a hydrophobic cyclic olefin copolymer (COC) to overcome the current limitations. Water vapor transmission rates (WVTR) of the films reveal a 10-fold enhancement in the WVTR compared to the substrate while maintaining outstanding transparency over most of the visible and solar spectrum, a necessary condition for integration with optoelectronic devices.

36 MATERIALS SCIENCE↗

Eutectic Processing of Semiconductor Colloidal Nanocrystals for Energy Applications

Colloidal semiconductor nanocrystals (NCs) offer a costeffective platform for light-energy conversion in X-ray scintillators, photovoltaics, lasers, and display technologies. Yet, device-relevant NCs often require complex heterostructured compositions, where lattice imperfections compromise the efficiency and stability of photoconversion processes. Here, we show that a simple synthetic detour through a eutectic state of II−VI semiconductor NCs (e.g., CdSe, ZnSe) with halide salts (e.g., CdCl 2 , ZnCl 2 ) overcomes this limitation by melting and reconstructing NC lattices into defect-free alloyed and core/shell architectures. Applied to ternary CdSeTe NCs, this process produces downconverters with record brightness and minimal line widths, delivering a 3-fold increase in film-side external quantum efficiency of commercial CdTe photovoltaic modules (First Solar Inc.). Meanwhile, eutectic processing of CdSe-based core/shell emitters yields an 8-fold enhancement in their photoluminescence stability under backlight operation, addressing the reliability bottleneck for display technologies. Together, these findings establish eutectic NC processing as a scalable route to efficient, durable photoconversion materials for energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energy Selects

In this work, we present a few key highlights from our editorial advisory board members. They discuss three articles published recently in ACS Energy Letters. These articles discuss major advances in designing advanced energy storage systems and perovskite photovoltaic modules. The importance of designing solid electrolytes and efforts to overcome the challenges in aqueous Zn batteries are also presented.

25 ENERGY STORAGE↗

Selective dissolution of halide perovskites as a step towards recycling solar cells

Most research on perovskite solar cells has focused on improving power-conversion efficiency and stability. However, if one could refurbish perovskite solar cells, their stability might not be a critical issue. From the perspective of cost effectiveness, if failed, perovskite solar cells could be collected and recycled; reuse of their gold electrodes and transparent conducting glasses could reduce the price per watt of perovskite photovoltaic modules. Here, we present a simple and effective method for removing the perovskite layer and reusing the mesoporous TiO 2 -coated transparent conducting glass substrate via selective dissolution. We find that the perovskite layer can be easily decomposed in polar aprotic solvents because of the reaction between polar aprotic solvents and Pb 2+ cations. After 10 cycles of recycling, a mesoporous TiO 2 -coated transparent conducting glass substrate-based perovskite solar cell still shows a constant power-conversion efficiency, thereby demonstrating the possibility of recycling perovskite solar cells.

14 SOLAR ENERGY↗

Enabling unassisted solar water splitting by iron oxide and silicon

A solution for large-scale solar energy storage is photoelectrochemical (PEC) water splitting. However, its development has been impeded by the poor performance of photoanodes, particularly in their capability for photovoltage generation. Many examples employing photovoltaic modules to correct the deficiency for unassisted solar water splitting have been reported to-date. We show that, by using the prototypical photoanode material of haematite as a study tool, structural disorders on or near the surfaces are important causes of the low photovoltages. We develop a facile re-growth strategy to reduce surface disorders and as a consequence, a turn-on voltage of 0.45 V (versus reversible hydrogen electrode) is achieved. In conclusion, this result permits us to construct a photoelectrochemical device with a haematite photoanode and Si photocathode to split water at an overall efficiency of 0.91%, with NiFeOx and TiO2/Pt overlayers, respectively.

25 ENERGY STORAGE↗

Understanding the role of selenium in defect passivation for highly efficient selenium-alloyed cadmium telluride solar cells

Electricity produced by cadmium telluride (CdTe) photovoltaic modules is the lowest-cost electricity in the solar industry, and now undercuts fossil fuel-based sources in many regions of the world. This is due to recent efficiency gains brought about by alloying selenium into the CdTe absorber, which has taken cell efficiency from 19.5% to its current record of 22.1%. Although the addition of selenium is known to reduce the bandgap of the absorber material, and hence increase the cell short-circuit current, this effect alone does not explain the performance improvement. Here, by means of cathodoluminescence and secondary ion mass spectrometry, we show that selenium enables higher luminescence efficiency and longer diffusion lengths in the alloyed material, indicating that selenium passivates critical defects in the bulk of the absorber layer. Here, this passivation effect explains the record-breaking performance of selenium-alloyed CdTe devices, and provides a route for further efficiency improvement that can result in even lower costs for solar-generated electricity.

14 SOLAR ENERGY↗

Electrolytic gold plating, stripping, and ion transport dynamics through a solid-state iodide perovskite

The pronounced electrochemical reactivity between halide perovskites and metal electrodes can introduce mobile extrinsic metal ions which can cause device instability or enable novel functionalities. Here we systematically investigate the kinetics of gold cation (Au + ) migration in indium tin oxide (ITO)/methylammonium lead triiodide (MAPbI 3 )/Au model devices under long-term potentiostatic biasing. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) analyses reveal that Au + ions, electrochemically generated at the Au anode, traverse the perovskite layer with diffusion coefficients on the order of 10 −11 to 10 −10 cm 2 s −1 and are subsequently reduced at the cathode as Au 0 clusters, resembling metal plating behavior in electrolytic cells and solid-state batteries during charging. Furthermore, reversing the applied bias strips the plated Au 0 , revealing reversibility suitable for bipolar resistive switching devices and providing direct evidence of the electrochemical and ionic nature of Au transport within the perovskite matrix. Quantitatively determining diffusion coefficients and ion concentrations provides foundational inputs for future drift-diffusion modelling opportunities and allows us to relate our findings to implications on long term operation of devices like photovoltaic modules. These results clearly demonstrate the solid-state electrochemical nature of perovskite devices, highlight methods to be more quantitative about ion transport properties, provide and emphasize the importance of disentangling electro-, photo-, photoelectrochemical processes for understanding device performance and unlocking new functionalities.

14 SOLAR ENERGY↗

Performance Modeling of Tandem Photovoltaics: A Yearlong Outdoor Degradation Analysis of a Ga⁢As//Si Minimodule

We present a performance modeling and degradation analysis framework for tandem photovoltaic modules, building upon established procedures for crystalline silicon devices and adapting them to account for the spectral sensitivity of multijunction technologies. The methodology employs filter criteria to select outdoor measurements close to standard test conditions (STC) under stable spectral and ambient conditions, followed by normalization of power production data with corrections for temperature, irradiance, and precipitable water vapor. We demonstrate this framework using a mechanically stacked four-terminal gallium arsenide (Ga⁢As) // silicon (Si) tandem solar minimodule deployed outdoors from October 2019 to January 2021 in Golden, Colorado, USA. We determined degradation rates of −4.1 ±0.2%/year for the Ga⁢As subcell and −2.5 ±0.9%/year for the Si subcell, with analysis of individual performance metrics indicating that packaging degradation, particularly delamination, was the dominant failure mode. Simulations using PVcircuit, an open-source equivalent-circuit solver, confirmed these findings. The presented methodology provides a reproducible foundation for performance modeling and degradation analysis of emerging tandem technologies.

14 SOLAR ENERGY↗

Mitigation of Dust Impact on Solar Collectors by Water-Free Cleaning With Transparent Electrodynamic Films: Progress and Challenges

Energy-yield loss caused by soiling of photovoltaic modules and concentrated solar power (CSP) mirrors in utility- scale power plants installed in semiarid lands and deserts would result in unsustainable demands for fresh water needed for clean- ing. This paper reviews the progress of the electrodynamic screen (EDS) film technology for frequent water-free cleaning with low- energy requirements. Results presented here, based on laboratory- scale EDS-film-laminated solar panel cleaning, show that the output power can be restored higher than 95% of the initial power under clean conditions. For solar mirrors, the specular reflection efficiency can be maintained over 90% ensuring high efficiency of the CSP plants. Operation of the EDS film for main- taining high optical efficiency of solar collectors requires less than 0.2 Wh/ma 2 /cleaning cycle. Here, principles, optical modeling, construc- tion, lamination of the EDS films on modules and mirrors, and experimental data showing optical efficiency restoration without water consumption are presented. Lastly, current challenges in developing electrodes that would meet optical and conduction properties

14 SOLAR ENERGY↗

Potential-Induced Degradation of Cu(In,Ga)Se 2 Solar Cells: Alkali Metal Drift and Diffusion Effects

Potential-induced degradation (PID) of photovoltaic modules is due to transport of alkali metal ions (Na + ) from the soda-lime glass (SLG) into the semiconductors. For the most efficient polycrystalline absorbers, Na and K in the Cu(In,Ga)(Se,S) 2 (CIGS) absorber often benefit performance, so a more detailed mechanism for PID is needed. To that end, CIGS solar cells have been encapsulated, stressed with high voltage, and cored to extract the active regions for characterization. SLG substrates led to 14.9% efficiency on average, which reduced to 0% after 25 h of -1000 V bias. This was accompanied by increased Na in the CIGS layer, particularly at the buffer interface, as well as decreased carrier concentrations. On the other hand, borosilicate glass substrates with low Na and high K content led to 13.6% efficiency on average, which only reduced to 12.1% after 25 h of stress. This was accompanied by slightly increased K content in the CIGS layer. As K has led to recent world record efficiency CIGS devices, understanding Na and K similarities and differences may help to enhance initial efficiency and reduce PID.

14 SOLAR ENERGY↗

Evaluation of the Durability of Flexible Barrier Materials

To enable the production of lightweight photovoltaic modules, it is desired to use thin film absorbers on metal substrates in a flexible package. To do this with a polymer based frontsheet, it is estimated that a water vapor transmission rate (WVTR) less than 10-4 g/m2/day must be achieved and maintained through the expected life of the module. Barrier-frontsheet films have been developed at 3M with very low permeation rates and evaluated for their long term durability with respect to WVTR and optical transmittance. After exposure to 2500 h of 10 UV suns at 105 degrees C, one design was found which experienced negligible loss in optical transmission while maintaining a WVTR well below the required 10-4 g/m2/day. Further accelerated tests were conducted at different stress levels. For some less durable designs we were able to obtain degradation acceleration factors suggesting the highest exposure was equal to between 4.4 and 10 y on a roof.

14 SOLAR ENERGY↗

Transmission Electron Microscopy Study on Degradation Mechanism of CdTe Thin-Film Solar Cells

In this work, we used transmission electron microscopy in a structural and chemical study on CdTe thin-film solar cells with different degradation degrees from the same photovoltaic module. We found that in the most-degraded CdTe solar cell, the accumulation of Na is precisely localized in the discontinuous part of the CdS layer. The local concentration of Na is determined to be ~18 at.%. This could be the root-cause degradation mechanism in CdTe thin-film solar cells. In addition, the notable accumulation of Na at the TCO/SLG interface could be responsible for the delamination of the TCO layer from the SLG substrate.

14 SOLAR ENERGY↗

Spatio-Temporal Modeling of Field Surveyed Backsheet Degradation

Assessing photovoltaic module backsheet durability is critical to increasing module lifetime. Lab based accelerating testing has recently failed to predict large scale failures of widely adopted polymeric materials. Field surveyed data is critical to assess the performance of component lifetime. Using a documented field survey protocol, 13 field surveys where conducted. Each measurement is encoded with it's spatial location in respect to the other modules. By combining field survey data on degradation predictors with real time satellite weather data, data-driven predictive models of backsheet degradation were trained. LOESS models were constructed to investigate the spatial dependence of measurements. It was found that micro-climatic effects like tree-lines, ground surface changes, and elevation changes effected the magnitude and variance of the measurements. A GAM model was created to predict the value of degradation based on measured predictors. The model includes variables on the climate of the system and the location of each measurement in the PV mounting structure. The model performed well with an adj.R 2 of 0.95 for yellowness index prediction. The model was cross-validated using k-folds.

backsheet↗