Search NASA⌕ Search

SEARCH · Search NASA

Results for “Process Systems Engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

A Multidisciplinary Approach to Mixer-Ejector Analysis and Design

The design of an engine for a civil supersonic aircraft presents a difficult multidisciplinary problem to propulsion system engineers. There are numerous competing requirements for the engine, such as to be efficient during cruise while yet quiet enough at takeoff to meet airport noise regulations. The use of mixer-ejector nozzles presents one possible solution to this challenge. However, designing a mixer-ejector which will successfully address both of these concerns is a difficult proposition. Presented in this paper is an integrated multidisciplinary approach to the analysis and design of these systems. A process that uses several low-fidelity tools to evaluate both the performance and acoustics of mixer-ejectors nozzles is described. This process is further expanded to include system-level modeling of engines and aircraft to determine the effects on mission performance and noise near airports. The overall process is developed in the OpenMDAO framework currently being developed by NASA. From the developed process, sample results are given for a notional mixer-ejector design, thereby demonstrating the capabilities of the method.

Hendricks, Eric, S.↗
DOE OSTI2025

Measurement of partial vapor pressures of salt mixtures via combined horizontal transpiration and thermogravimetric analysis

A method combining thermogravimetric analysis (TGA) and horizontal transpiration with elemental analysis via inductively coupled plasma mass spectrometry or ion chromatography enabled calculation of partial pressures of individual salts in molten mixtures. TGA quantified total mass loss, while transpiration identified vapor-phase composition. Furthermore, two chloride (NaCl-MgCl 2 , NaCl-MgCl 2 + UCl 3 ) salts and one mixed halide (LiCl-LiF + Li 2 O) salt were analyzed at 750 °C and 550 °C, respectively. NaCl and MgCl 2 vapor pressures were 2.19–2.61 × 10 -4 atm and 2.47–2.48 × 10 -5 atm (dependent upon the identity of the invesitgated mixture); UCl 3 was 1.42 × 10 -7 atm. LiCl and LiF vapor pressures at 550 °C were 1.53 × 10 -6 and 6.32 × 10 -6 atm, respectively. Additionally, the TGA method was validated against values from the literature for unary LiCl and LiF.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Aerial and Processed Model Data Representing As-built Conditions in Coastal Port Arthur, Texas in May 2025

This dataset was collected by the Co-Design Team of the Southeast Texas Urban Integrated Field Lab, a research initiative led by the University of Texas at Austin and funded by the U.S. Department of Energy. The broader project focuses on developing climate-resilient design solutions for the Beaumont–Port Arthur region, with more information available at www.setx-uifl.org. Our team conducted aerial surveys of the Port Arthur coastal neighborhood in May 2025, before the start of construction scheduled for Summer 2026. These pre-construction datasets are designed to facilitate comparative analyses, including pre- and post-construction assessments and simulated inundation scenario evaluations. Aerial images were captured using DroneDeploy autonomous flight systems, with imagery processed through the DroneDeploy engine. All original aerial photographs are provided in JPG format and organized in zipped folders by area. The processed data package includes: 3D surface models Orthomosaics Geospatial and topographic mappings Point clouds For guidance on file contents, structure, and recommended usage, please refer to the included README file.

2D mapping↗
DOE OSTI2026

Resilience Through Data-Driven, Intelligent Designed Control: A Formal Methods Approach

The PNNL and GTRI team developed a strategy to integrate temporal logic rule specification for detection of cyber-intrusion in the source code and control algorithms of CPS using advanced cyber-data. The GTRI team utilized its capabilities in rule synthesis and temporal logic specifications for software assurance and verification to detect and predict impact of cyber-intrusions and malware in the computational and control algorithms of cyber-physical systems. The team also developed a testing and verification approach that could be used to validate the suggested approach against a realistic use-case CPS showcasing improvements in system impact prediction performance. Temporal logic offers a compact expression of events in absolute and relative time and has a formalized translation to state machines. As such, temporal logic rules can feasibly be synthesized to any system as a rule engine, with the process being formally verified to be correct. The goal here is to utilize temporal logic rules to detect cyber-attacks and manipulations in the computational algorithms and provide real-time software assurance and verification guarantees.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1973

An investigation of a sterile access technique for the repair and adjustment of sterile spacecraft

A description is presented of a unique system for the sterilization and sterile repair of spacecraft and the results of a test program designed to assess the biological integrity and engineering reliability of the system. This trailer-mounted system, designated the model assembly sterilizer for testing (MAST), is capable of the dry-heat sterilization of spacecraft and/or components less than 2.3 meters in diameter at temperatures up to 433 K and the steam sterilization of components less than 0.724 meter in diameter. Sterile access to spacecraft is provided by two tunnel suits, called the bioisolator suit systems (BISS), which are contiguous with the walls of the sterilization chambers. The test program was designed primarily to verify the biological and engineering reliability of the MAST system by processing simulated space hardware. Each test cycle simulated the initial sterilization of a spacecraft, sterile repair of a failed component, removal of the spacecraft from the MAST for mating with the bus, and a sterile recycle repair.

Farmer, F. H.↗
NASA NTRS1985

Systems analysis methodology for large scale systems

The objective is to develop a systematic approach for defining and evaluating alternative strategies for developing data processing and management systems. Various techniques and systems engineering tools are integrated to develop and present to the analysts and users an early definition of services desired along with probable and compatible operations concepts. Information is presented in the form of outlines, graphs and charts.

Moe, Karen L.↗
NASA NTRS1988

State variable representations in digital control systems with MA-prefiltered measurements

This paper derives three discrete state variable representations for a continuous-time plant driven by a zero-order hold with a combination of instantaneous measurements and measurements prefiltered by a multiinput/multioutput moving average (MA) process. These representations allow the control system engineer to model plants of this type accurately in a form which permits him to use standard techniques to design digital feedback controllers for them. An example is presented which illustrates how to obtain the coefficient matrices in each representation. Guidelines are presented for choosing the best representation to use for any given plant of this type.

Polites, Michael E.↗
NASA NTRS1991

Resources of Near-Earth Space: Abstracts

The objectives are by theory, experiment, and bench-level testing of small systems, to develop scientifically-sound engineering processes and facility specifications for producing propellants and fuels, construction and shielding materials, and life support substances from the lithospheres and atmospheres of lunar, planetary, and asteroidal bodies. Current emphasis is on the production of oxygen, other usefull gases, metallic, ceramic/composite, and related byproducts from lunar regolith, carbonaceous chrondritic asteroids, and the carbon dioxide rich Martian atmosphere.

Source record↗
NASA NTRS1991

Designing for cost

Parametric cost analysis is presently defined as the generation and application of equations to cost analysis; equations defining cost as a function of system-design parameters, performance parameters, or engineering process parameters, constitute a valuable tool for design-to-cost efforts. Cost sensitivity is expressed through the partial derivatives of these functions, furnishing insight into the magnitude and direction of cost change for given parameter changes. The robust design method thus obtained is a systematic and efficient approach for determining the near-optimum set of design parameters for cost, which highlights important factors affecting operation and performance as well as cost.

Dean, Edwin B.↗
NASA NTRS1993

Radiometric Compensation and Calibration for Radarsat ScanSAR

Due to lack of a standard for modeling the radar echo signal in terms of signal unit and coordinates as well as lack of a standard in designing the gain factors in each stage of a processor, absolute radiometric calibration of a SAR system is usually performed by treating the sensor and processor as one inseparable unit. This often makes the calibration procedure complicated and requiring the involvement of both radar system engineers and processor engineers in the whole process. This paper introduces a standard for modeling the radar echo signal and a standard in designing the gain factor of a ScanSAR processor. In this paper, the radar equation is derived based on the amount of energy instead of the power received from a backscatterer. These efforts lead to simple and easy-to-understand equations for radiometric compensation and calibration.

Jin, Michael Y.↗
NASA NTRS2015

Additively Manufactured Main Fuel Valve Housing

Selective Laser Melting (SLM) was utilized to fabricate a liquid hydrogen valve housing typical of those found in rocket engines and main propulsion systems. The SLM process allowed for a valve geometry that would be difficult, if not impossible to fabricate by traditional means. Several valve bodies were built by different SLM suppliers and assembled with valve internals. The assemblies were then tested with liquid nitrogen and operated as desired. One unit was also burst tested and sectioned for materials analysis. The design, test results, and planned testing are presented herein.

Eddleman, David↗
NASA NTRS2019

Writing a New Automated Testing Method for Custom Display Components

During the launch process of the Space Launch System (SLS), engineers in the Firing Room of the Launch Control Center (LCC) will be analyzing displays that show data and statistics about the vehicle and launch. These displays are subject to a battery of tests, but the custom components they use are not currently supported by any testing framework. My project is to modify a testing framework so that the custom components on these displays can be tested similarly to how a user would interact with them.

Automated Testing↗
NASA NTRSDate not supplied

TPSAS-NF1676L-33992-DND

The CERES Science Team integrates and fuses observations from 6 CERES instruments aboard the Terra, Aqua, S-NPP, and NOAA-20 missions with data from more than 20 other unique data sources. Following the November 2017 launch of CERES Flight Model 6 (FM6) onboard NOAA20, CERES has now amassed over 80 instrument-years of valuable Earth radiation budget data. The rapidly growing volume of CERES data coupled with the introduction of new data products alongside improvements to existing science algorithms fosters the requirement for faster, more flexible, and scalable data production and orchestration. New virtualized, cloud-centric compute hardware hosted by the NASA Langley Research Center’s (LaRC) Atmospheric Sciences Data Center (ASDC) provides an ideal environment for these ever-increasing data production demands for CERES. This poster discusses updates to the implementation of the CERES Data Management Team’s (DMT) CERES AuTomAted job Loading sYSTem (CATALYST), a custom data processing workflow engine for CERES, to use on-demand computing resources to perform automated CERES data production processing in a Linux-based container environment. Linux containers provide CERES the flexibility to build multiple production environments in containers tailored for specific workloads and allow effortless provisioning of resources based on the CERES Science Team’s data production requirements.

Thomas N. Hillyer↗
NASA NTRS1978

Magnetically confined plasma solar collector

The possibility of using a plasma medium for collecting solar energy in space is examined on the basis of a concept involving an orbiting magnetic bottle in which a solar-energy-absorbing plasma is confined. A basic system uses monatomic cesium as working fluid. Cesium evaporates from a source and flows into the useful volume of a magnetic bottle where it is photoionized by solar radiation. Ions and electrons lost through the loss cones are processed by a recovery system, which might be a combination of electromagnetic devices and heat engines. This study concentrates on the plasma production processes and size requirements, estimates of the magnetic field required to confine the plasma, and an estimate of the system parameters for a 10 GW solar collector using cesium.

Walters, C. T.↗
NASA NTRS1993

NASA/DoD Aerospace Knowledge Diffusion Research Project. Paper 31: The information-seeking behavior of engineers

Engineers are an extraordinarily diverse group of professionals, but an attribute common to all engineers is their use of information. Engineering can be conceptualized as an information processing system that must deal with work-related uncertainty through patterns of technical communications. Throughout the process, data, information, and tacit knowledge are being acquired, produced, transferred, and utilized. While acknowledging that other models exist, we have chosen to view the information-seeking behavior of engineers within a conceptual framework of the engineer as an information processor. This article uses the chosen framework to discuss information-seeking behavior of engineers, reviewing selected literature and empirical studies from library and information science, management, communications, and sociology. The article concludes by proposing a research agenda designed to extend our current, limited knowledge of the way engineers process information.

Pinelli, Thomas E.↗
NASA NTRS1976

Space shuttle engineering and operations support. Avionics system engineering

The shuttle avionics integration laboratory (SAIL) requirements for supporting the Spacelab/orbiter avionics verification process are defined. The principal topics are a Spacelab avionics hardware assessment, test operations center/electronic systems test laboratory (TOC/ESL) data processing requirements definition, SAIL (Building 16) payload accommodations study, and projected funding and test scheduling. Because of the complex nature of the Spacelab/orbiter computer systems, the PCM data link, and the high rate digital data system hardware/software relationships, early avionics interface verification is required. The SAIL is a prime candidate test location to accomplish this early avionics verification.

Broome, P. A.↗
NASA NTRS1988

The PC/AT compatible computer as a mission control center display processor at Ames-Dryden Flight Research Facility

The NASA Ames-Dryden Flight Research Facility's Western Aeronautical Test Range will assign the flight test data display processing function to Mission Control Centers in order to allow research engineers to flexibly configure their own display-processing system to optimize performance during a flight research mission. This will leave the Telemetry Radar Acquisition and Processing System more time to acquire data. One of the processors chosen to handle the display-processing function is an IBM PC/AT-compatible, rack-mounted PC giving engineers a personalized set of analytic and display tools, developed on the basis of off-the-shelf PC/AT-compatible engineering hardware and software items.

Hammons, Kevin R.↗