Search NASA⌕ Search

SEARCH · Search NASA

Results for “Process variable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

A petrogenetic model of the relationships among achondritic meteorites

Petrological evidence is used to support the hypothesis that although the magma source regions and parent bodies of basaltic achondrite, shergottite, nakhlite, and chassignite meteorites are clearly distinct, they may be simply related. It is proposed that the peridotites which on partial melting generated the parent magmas of the shergottite meteorites differed from those which gave rise to eucritic magmas by being enriched in a component rich in alkalis and other volatiles. Similarly, the source regions of the parent magmas of the nakhlite and chassignite meteorites differed from those on the shergottite parent body by being still richer in this volatile-rich component. These regions could have been related by processes such as mixture of variable amounts of volatile-rich and volatile-poor components in planetary or nebular settings, or alternatively by variable varying degrees of volatile loss from volatile-rich materials.

Stolper, E.↗

Remote Sensing and Problems of the Hydrosphere

A discussion of freshwater and marine systems is presented including areas of the classification of lakes, identification and quantification of major functional groups of phytoplankton, sources and sinks of biochemical factors, and temporal and regional variability of surface features. Atmospheric processes linked to hydrospheric process through the transfer of matter via aerosols and gases are discussed. Particle fluxes to the aquatic environment and global geochemical problems are examined.

Goldberg, E. D.↗

Solar terrestrial observatory

Eight basic solar-terrestrial scientific objectives that benefit from the Shuttle/Platform approach and a program of measurements for each are discussed. The objectives are to understand: (1) solar variability, (2) wave-particle processes, (3) magnetosphere-ionosphere mass transport, (4) the global electric circuit, (5) upper atmospheric dynamics, (6) middle atmospheric chemistry and energetics, (7) lower atmospheric turbidity, and (8) planetary atmospheric waves. A two stage approach to a multidisciplinary payload is developed: an initial STO, that uses a single platform in a low-Earth orbit, and an advanced STO that uses two platforms in differing orbits.

Source record↗

Hot spots of Io

The size and temperature, morphology and distribution, variability, possible absorption features, and processes of hot spots on Io are discussed, and an estimate of the global heat flux is made. Size and temperature information is deconvolved to obtain equivalent radius and temperature of hot spots, and simultaneously obtained Voyager thermal and imaging data is used to match hot sources with specific geologic features. In addition to their thermal output, it is possible that hot spots are also characterized by production of various gases and particulate materials; the spectral signature of SO2 has been seen. Origins for relatively stable, low temperature sources, transient high temperature sources, and relatively stable, high-tmperature sources are discussed.

Pearl, J. C.↗

Computer modeling of thermoelectric generator performance

Features of the DEGRA 2 computer code for simulating the operations of a spacecraft thermoelectric generator are described. The code models the physical processes occurring during operation. Input variables include the thermoelectric couple geometry and composition, the thermoelectric materials' properties, interfaces and insulation in the thermopile, the heat source characteristics, mission trajectory, and generator electrical requirements. Time steps can be specified and sublimation of the leg and hot shoe is accounted for, as are shorts between legs. Calculations are performed for conduction, Peltier, Thomson, and Joule heating, the cold junction can be adjusted for solar radition, and the legs of the thermoelectric couple are segmented to enhance the approximation accuracy. A trial run covering 18 couple modules yielded data with 0.3% accuracy with regard to test data. The model has been successful with selenide materials, SiGe, and SiN4, with output of all critical operational variables.

Chmielewski, A. B.↗

Unique variable polarity plasma arc welding for space shuttle

Since the introduction of the Plasma Arc Torch in 1955 and subsequent to the work at Boeing in the 1960's, significant improvements crucial to success have been made in the Variable Polarity Plasma Arc (VPPA) Process at the Marshall Space Flight Center. Several very important advantages to this process are given, and the genesis of PA welding, the genesis of VPPA welding, special equiment requirements, weld property development, results with other aluminum alloys, and the eventual successful VPPA transition to production operations are discussed.

Schwinghamer, R. J.↗

Preliminary experiment requirements document for Solar and Terrestrial Atmospheres Spectrometer (STAS)

The principal scientific objective of the Solar and Terrestrial Atmospheres Spectrometer (STAS) project is the measurement of the absolute ultraviolet solar spectral irradiance with: (1) resolution of better than 15 mA, and (2) absolute irradiance uncertainty at the state of the art (less than or equal to 3%). High measurement accuracy coupled with high spectral resolution are necessary to identify the nature of the radiation, its variability, and to identify solar processes which may cause the changes. Solar radiation between 1200 and 3600 A dominates the photochemistry of the mesosphere and stratosphere. Some important minor species, such as NO, show very complex and fundamentally narrow structure in their photodestruction cross sections, especially in the region of the Schumann-Runge bands of O2. Understanding the photochemical processes in the terrestrial atmosphere requires knowledge of both the cross sections and of the solar spectrum with the highest possible resolution and accuracy.

Source record↗

Cooling Shelf For Electronic Equipment

Heat-pipe action cools and maintains electronics at nearly constant temperature. System designed to control temperatures of spacecraft shelves or baseplates by combining honeycomb sandwich panel with reservoir of noncondensable gas and processing resulting device as variable-conductance heat pipe. Device provides flat surface for mounting heat-dissipating electronics that is effectively cooled and maintained at nearly constant temperature. Potentially useful in freeze drying, refrigeration, and air conditioning.

Tanzer, Herbert J.↗

Conceptual design optimization study

The feasibility of applying multilevel functional decomposition and optimization techniques to conceptual design of advanced fighter aircraft was investigated. Applying the functional decomposition techniques to the conceptual design phase appears to be feasible. The initial implementation of the modified design process will optimize wing design variables. A hybrid approach, combining functional decomposition techniques for generation of aerodynamic and mass properties linear sensitivity derivatives with existing techniques for sizing mission performance and optimization, is proposed.

Hollowell, S. J.↗

Cross section for production of low-energy electron-positron pairs by relativistic heavy ions

Starting with the lowest-order unscreened QED matrix element for electron-positron pair production by heavy charged particles, the paper calculates the cross section for this process differential in all independent variables and valid for all pair energies small compared to the incident particle energy. Integration over the possible emission angles of one of the pair members gives an expression that is valid for low-energy pairs that can be compared with previous work based on the Weizsaecker-Williams method. Integration over the possible angles of the other pair member then yields an expression identical to one derived by Racah. The high energy-transfer limit of the expression for the cross section integrated over electron and positron angles is found to be identical to that of Kelner in the unscreened case.

Eby, P. B.↗

Lidar analysis techniques for use in the atmospheric boundary layer

There is a growing body of observational and theoretical evidence which suggests that local climate characteristics are associated with variations in the earth's surface. The link between surface variability and local-scale processes must be made if we are to improve our understanding of the feedback mechanisms involved in surface-atmosphere dynamics. However, to understand these interactions, the surface-atmosphere interface must be studied as a large-scale spatial system. Lidars are ideal tools to study the spatial properties of the atmosphere. The described techniques were developed for use with the Los Alamos Water Raman-Lidar, but are applicable to many other types of lidar. The methodology of the analysis of lidar data is summarized in order to determine meteorological parameters in the atmospheric boundary layer. The techniques are not exhaustive but are intended to show the depth and breadth of the information which can be obtained from lidars. Two methods for the computation of water-vapor fluxes were developed. The first uses the fact that the water vapor concentration in the vertical direction follows a logarithmic profile when corrected for atmospheric stability. The second method involves using inertial dissipation techniques in which lidar-derived spatial and temporal power spectra are used to determine the flux.

Eichinger, William E.↗

RR Lyrae stars in Local Group galaxies. IV - IC 1613

Deep charge-coupled device images of a field in IC 1613 away from the star forming central regions were taken with the '4-shooter' on the Hale 5 m telescope, and processed to find photometrically measure variable stars. Fifteen RR Lyrae stars were found, and periods, light curves, and finding charts for them are presented. The mean magnitude of RR Lyrae stars in this galaxy is deduced to be 24.90 mag. Assuming the absolute g magnitude for RR Lyraes to be Mg = 0.73 mag, and using extinction Ag = 0.07 mag, a distance modulus of 24.10 +/- 0.27 mag is derived. The finding of RR Lyrae stars indicates the unambiguous presence of an old population. The distance modulus derived from them is smaller than that derived from the Cepheids by an amount which is dependent upon the RR Lyrae zero-point calibration adopted, and may be as large as 0.3 mag. The difference has the same sense and magnitude as the discrepancy in the LMC. The probable sources of the problem are discussed.

Saha, A.↗

A data fusion algorithm for multi-sensor microburst hazard assessment

A recursive model-based data fusion algorithm for multi-sensor microburst hazard assessment is described. An analytical microburst model is used to approximate the actual windfield, and a set of 'best' model parameters are estimated from measured winds. The winds corresponding to the best parameter set can then be used to compute alerting factors such as microburst position, extent, and intensity. The estimation algorithm is based on an iterated extended Kalman filter which uses the microburst model parameters as state variables. Microburst state dynamic and process noise parameters are chosen based on measured microburst statistics. The estimation method is applied to data from a time-varying computational simulation of a historical microburst event to demonstrate its capabilities and limitations. Selection of filter parameters and initial conditions is discussed. Computational requirements and datalink bandwidth considerations are also addressed.

Wanke, Craig R.↗

A data fusion algorithm for multi-sensor microburst hazard assessment

A recursive model-based data fusion algorithm for multi-sensor microburst hazard assessment is described. An analytical microburst model is used to approximate the actual windfield, and a set of 'best' model parameters are estimated from measured winds. The winds corresponding to the best parameter set can then be used to compute alerting factors such as microburst position, extent, and intensity. The estimation algorithm is based on an iterated extended Kalman filter which uses the microburst model parameters as state variables. Microburst state dynamic and process noise parameters are chosen based on measured microburst statistics. The estimation method is applied to data from a time-varying computational simulation of a historical microburst event to demonstrate its capabilities and limitations. Selection of filter parameters and initial conditions is discussed. Computational requirements and datalink bandwidth considerations are also addressed.

Wanke, Craig R.↗

Climatology and natural variability of the global hydrologic cycle in the GLA atmospheric general circulation model

Time average climatology and low-frequency variabilities of the global hydrologic cycle (GHC) in the Goddard Laboratory for Atmospheres (GLA) general circulation model (GCM) were investigated in the present work. A 730-day experiment was conducted with the GLA GCM forced by insolation, sea surface temperature, and ice-snow undergoing climatological annual cycles. Ifluences of interactive soil moisture on time average climatology and natural variability of the GHC were also investigated by conducting 365-day experiments with and without interactive soil moisture. Insolation, sea surface temperature, and ice-snow were fixed at their July levels in the latter two experiments. Results show that the model's time average hydrologic cycle variables for July in all three experiments agree reasonably well with observations. Except in the case of precipitable water, the zonal average climates of the annual cycle experiment and the two perpetual July experiments are alike, i.e., their differences are within limits of the natural variability of the model's climate. Statistics of various components of the GHC, i.e., water vapor, evaporation, and precipitation, are significantly affected by the presence of interactive soil moisture. A long-term trend is found in the principal empirical modes of variability of ground wetness, evaporation, and sensible heat. Dominant modes of variability of these quantities over land are physically consistent with one another and with land surface energy balance requirements. The dominant mode of precipitation variability is found to be closely related to organized convection over the tropical western Pacific Ocean. The precipitation variability has timescales in the range of 2 to 3 months and can be identified with the stationary component of the Madden-Julian Oscillation. The precipitation mode is not sensitive to the presence of interactive soil moisture but is closely linked to both the rotational and divergent components of atmospheric moisture transport. The present results indicate that globally coherent natural variability of the GHC in the GLA GCM has two basic timescales in the absence of annual cycles of external forcings: a long-term trend associated with atmosphere-soil moisture interaction which affects the model atmosphere mostly over midlatitude continental regions and a large-scale 2- to 3-month variability associated with atmospheric moist processes over the western Pacific Ocean.

Lau, K.-M.↗

Structural and stratigraphic features and ERS 1 synthetic aperture radar backscatter characteristics of ice growing on shallow lakes in NW Alaska, winter 1991-1992

Changes in Earth Remote-Sensing Satellite (ERS) 1 C band synthetic aperture radar (SAR) backscatter intensity (sigma(exp 0)) from ice growing on shallow tundra lakes at three locations in NW Alaska are described. Ice core analysis shows that all lakes on the coast at Barrow the ice, whether floating or frozen to the bottom, includes an inclusion-free layer overlying a layer of ice with tubular bubbles oriented parallel to the direction of growth. The clear ice may also be overlain by a discontinuous layer of bubbly snow ice. Backscatter is low (-16 to -22 dB) at the time of initial ice formation, probably due to the specular nature of the upper and lower ice surfaces causing the radar pulse to be reflected away from the radar. As the ice thickens during the autumn, backscatter rises steadily. Once the ice freezes to the lake bottom, regardless of the presence of foward scattering tubular bubbles, low backscatter values of -17 to -18 dB are caused by absorption of the radar signal in the lake bed. For ice that remains afloat all winter the ice-water interface and the tubular bubbles combine, presumably via an incoherent double-bounce mechanism, to cause maximum backscatter values of the order of -6 to -7 dB. The sigma(exp 0) saturates at -6 to -7 dB before maximum ice thickness and tubular bubble content are attained. A simple ice growth model suggests that the layer of ice with tubular bubbles need be only a few centimeters thick midway through the growth season to cause maximum backscatter from floating ice. During the spring thaw a previously unreported backscatter reversal is observed on the floating and grounded portions of the coastal lakes but not on the lakes farther inland. This reversal may be related to the ice surface topography and wetness plus the effects of a longer, cooler melt period by the coast. Time series of backscatter variations from shallow tundra lakes are a record of (1) the development of tubular bubbles in the ice and, by association, changes in the gas content of the underlying water and (2) the freezing of ice to the bottoms of the lakes and therefore lake bathymetry and water availability. SAR is also able to detect the onset of lake ice growth in autumn and the initiation of the spring thaw and thus has potential for monitoring high-altitude lake ice growth and decay processes in relation to climate variability.

Jeffries, M. O.↗

Formation of Electrostatic Potential Drops in the Auroral Zone

In order to examine the self-consistent formation of large-scale quasi-static parallel electric fields in the auroral zone on a micro/meso scale, a particle in cell simulation has been developed. The code resolves electron Debye length scales so that electron micro-processes are included and a variable grid scheme is used such that the overall length scale of the simulation is of the order of an Earth radii along the magnetic field. The simulation is electrostatic and includes the magnetic mirror force, as well as two types of plasmas, a cold dense ionospheric plasma and a warm tenuous magnetospheric plasma. In order to study the formation of parallel electric fields in the auroral zone, different magnetospheric ion and electron inflow boundary conditions are used to drive the system. It has been found that for conditions in the primary (upward) current region an upward directed quasi-static electric field can form across the system due to magnetic mirroring of the magnetospheric ions and electrons at different altitudes. For conditions in the return (downward) current region it is shown that a quasi-static parallel electric field in the opposite sense of that in the primary current region is formed, i.e., the parallel electric field is directed earthward. The conditions for how these different electric fields can be formed are discussed using satellite observations and numerical simulations.

Schriver, D.↗

Cloud Coverage and Height Distribution from the GLAS Polar Orbiting Lidar: Comparison to Passive Cloud Retrievals

The Geoscience Laser Altimeter System (GLAS) began full on orbit operations in September 2003. A main application of the two-wavelength GLAS lidar is highly accurate detection and profiling of global cloud cover. Initial analysis indicates that cloud and aerosol layers are consistently detected on a global basis to cross-sections down to 10(exp -6) per meter. Images of the lidar data dramatically and accurately show the vertical structure of cloud and aerosol to the limit of signal attenuation. The GLAS lidar has made the most accurate measurement of global cloud coverage and height to date. In addition to the calibrated lidar signal, GLAS data products include multi level boundaries and optical depth of all transmissive layers. Processing includes a multi-variable separation of cloud and aerosol layers. An initial application of the data results is to compare monthly cloud means from several months of GLAS observations in 2003 to existing cloud climatologies from other satellite measurement. In some cases direct comparison to passive cloud retrievals is possible. A limitation of the lidar measurements is nadir only sampling. However monthly means exhibit reasonably good global statistics and coverage results, at other than polar regions, compare well with other measurements but show significant differences in height distribution. For polar regions where passive cloud retrievals are problematic and where orbit track density is greatest, the GLAS results are particularly an advance in cloud cover information. Direct comparison to MODIS retrievals show a better than 90% agreement in cloud detection for daytime, but less than 60% at night. Height retrievals are in much less agreement. GLAS is a part of the NASA EOS project and data products are thus openly available to the science community (see http://glo.gsfc.nasa.gov).

Spinhime, J. D.↗