Search NASA⌕ Search

SEARCH · Search NASA

Results for “SIM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Dark matter energy exchange in stars orbiting supermassive black holes

Stars on tight orbits around the supermassive black hole at the Galactic Center pass through regions where the dark matter~(DM) density may be strongly enhanced. We compute the orbit-averaged DM-induced energy exchange for S4714 as an example. It is a star on an exceptionally close and relativistic orbit around Sagittarius~A*. For a spiked dark matter profile, the exchange reaches the stellar luminosity at $σ_{χp} \sim 10^{-36}~\mathrm{cm}^2$ for MeV-GeV masses and $σ_{χe} \sim 5\times10^{-38}~\mathrm{cm}^2$ for sub-MeV masses, opening a new annihilation-free route toward dark-star phases. These cross sections lie within the range predicted by freeze-in scenarios and are consistent with cosmic-ray--boosted and solar-reflection dark matter constraints.

Meighen-Berger, Stephan A. [Iowa U.] (ORCID:000000↗
DOE OSTI2026

Developing a Digital Twin for SRF Cavity Assembly at Fermilab

When assembling Superconducting Radio Frequency (SRF) Cavities, maintaining an environment devoid of particulates like dust and other small particles is essential. If a single spec of dust enters the cavity a significant degradation of performance can occur. To avoid a cavity failure Fermilab assembles the SRF cavities within a ISO-4 (Class 10) environment. This environment though is still susceptible to foreign contaminants when technicians enter and new components are added to the cleanroom. To reduce the risk even more Fermilab has introduced a cobot manipulator into the cleanroom environment to speed up the assembly time which will reduce the time that the technicians operate in the cleanroom. But, this still leaves the potential of contaminants to enter the cleanroom if new components need to be tested within the cleanroom. This project aims to lay the groundwork to develop a Digital Twin environment of the cleanroom to aid in manufacturing processes and testing. In its simplest form, a digital twin is a bidirectional link between a physical system and its digital counterpart or twin. NVIDIA Isaac Sim is used as the digital twin foundation for the digital representation of the cleanroom, specifically for the UR16e assembly area. A simulated UR16e was used to validate the performance of Isaac Sim as a testing environment by comparing the tool center points (TCP) positional data between the simulated and digital representation of the UR16e. Due to a new vision based robotic assembly process being introduced to the cleanroom a digital representation of the physical camera was tested and validated to ensure that it will produce close to the same outcome as the physical environment. The TCP comparison results showed a peak translational error of approximately 0.1mm and rotational errors of up to 8 between the simulated and digital UR16es. While the camera validation performed with high repeatability across multiple runs, it still requires minor tuning before it can accurately replicate a physical camera.

Imburgia, Joseph [Northern Illinois U.]↗
DOE OSTI2026

Cross-correlation of SPT-3G D1 CMB lensing and DES Y3 galaxy lensing

Measurements of the weak lensing of galaxies and of the cosmic microwave background (CMB) provide direct probes of the cosmic matter density field, but the two observables are sensitive to different spatial scales, redshift ranges, and survey systematics. Their cross-correlation thus enables consistency checks of the theoretical model and of potential systematics in either dataset. We present measurements of the cross-correlation between CMB lensing and cosmic shear over $\sim$1,300 deg$^2$ of the sky using the SPT-3G D1 CMB lensing maps and the Dark Energy Survey Year 3 (DES Y3) shear catalogs. For the first time, we measure this cross-correlation at high significance ($\sim 14σ$) when using a polarization-only CMB lensing reconstruction that is expected to be robust against biases induced by extragalactic foregrounds. We test a variety of other CMB lensing estimators that include temperature information and exhibit different tradeoffs between foreground biases and noise, as well as a shear sample that consists of blue, star-forming galaxies and has been shown to be less impacted by galaxy intrinsic alignments. Assuming $Λ$CDM and marginalizing over uncertainties in intrinsic alignments, baryonic feedback, and various nuisance parameters, we obtain a constraint on the amplitude of matter clustering $S_8 \equiv σ_8 \sqrt{Ω_m / 0.3} = 0.833^{+0.047}_{-0.061}$, consistent with both the primary CMB results from Planck and shear-only results from DES Y3. By combining our measurement with Planck, we find mild constraints on the astrophysical processes that impact the cross-correlation. We obtain a constraint on the intrinsic alignment amplitude of the DES sample that is competitive with that from shear-only analyses, and we find a lower limit on the strength of baryonic feedback.

Ouellette, A. [Illinois U., Urbana] (ORCID:0000000↗
DOE OSTI2026

Astrophysical Neutrino Sources as Colliders

High-energy neutrinos arise from processes at large center-of-mass energies, offering a window to test physics at comparable scales or beyond those accessible in collider experiments on Earth. Here, we present a recipe for extracting two-sided bounds on the inelastic $pp$ and $pγ$ cross sections from neutrino point-source data, by independently constraining every astrophysical input (cosmic-ray luminosities and target densities) through electromagnetic observations or theoretical arguments. The cross section is then the only remaining free parameter. Applying this framework to the IceCube associations with TXS~0506+056, NGC~1068, and the Galactic Plane, to a stacked population of eleven X-ray bright Seyfert galaxies, to the ultra-high-energy KM3NeT event KM3-230213A, and to projected observations of ultra-high-energy neutrinos, we obtain constraints that span center-of-mass energies from $\sqrt{s}\sim 1$ GeV to $\sim 10^{5}$ GeV, some of which are well beyond the reach of the LHC and, for the $pγ$ channel, beyond HERA. Several of these bounds are more stringent than unitarity limits.

Argüelles, Carlos A. [Harvard U.]↗
DOE OSTI2026

Probing the Cosmic Axion Background via Axion-Photon Conversion in Filaments

The cosmic axion background (CaB) is a hypothetical population of relativistic axions produced in the early universe. If the CaB is produced from dark matter decays, the axions in this population can convert to photons in the magnetic fields of cosmological filaments, resulting in an isotropic gamma ray background flux. We present new indirect detection constraints on the axion mass and axion-photon coupling, for GeV-TeV dark matter with a decay lifetime below $10^{30}$ sec, by comparing this flux against experimental data. We exclude significant parameter space for axion masses below $10^{-5}$~eV for a broad range of dark matter masses and lifetimes, assuming conservative filament magnetic field strengths ($\sim 1$ nG). For large filament fields ($\sim 100$ nG), our strategy also constrains a portion of the QCD-axion parameter space for TeV-scale dark matter masses.

Rocha, Duncan [Chicago U., EFI; Chicago U., KICP]↗
DOE OSTI2023

Delineating the Impact of Transition‐Metal Crossover on Solid‐Electrolyte Interphase Formation with Ion Mass Spectrometry

Abstract Lithium‐metal batteries (LMB) employing cobalt‐free layered‐oxide cathodes are a sustainable path forward to achieving high energy densities, but these cathodes exhibit substantial transition‐metal dissolution during high‐voltage cycling. While transition‐metal crossover is recognized to disrupt solid‐electrolyte interphase (SEI) formation on graphite anodes, experimental evidence is necessary to demonstrate this for lithium‐metal anodes. In this work, advanced high‐resolution 3D chemical analysis is conducted with time‐of‐flight secondary‐ion mass spectrometry (TOF‐SIMS) to establish spatial correlations between the transition metals and electrolyte decomposition products found on cycled lithium‐metal anodes. Insights into the localization of various chemistries linked to crucial processes that define LMB performance, such as lithium deposition, SEI growth, and transition‐metal deposition are deduced from a precise elemental and spatial analysis of the SEI. Heterogenous transition‐metal deposition is found to perpetuate both heterogeneous SEI growth and lithium deposition on lithium‐metal anodes. These correlations are confirmed across various lithium‐metal anodes that are cycled with different cobalt‐free cathodes and electrolytes. An advanced electrolyte that is stable to higher voltages is shown to minimize transition‐metal crossover and its effects on lithium‐metal anodes. Overall, these results highlight the importance of maintaining uniform SEI coverage on lithium‐metal anodes, which is disrupted by transition‐metal crossover during operation at high voltages.

Chemistry↗
DOE OSTI2024

Theoretical modeling of a bottom-raised oscillating surge wave energy converter structural loadings and power performances

Here, this study presents theoretical formulations to evaluate the fundamental parameters and performance characteristics of a bottom-raised oscillating surge wave energy converter (OSWEC) device. Employing a flat plate assumption and potential flow formulation in elliptical coordinates, closed-form equations for the added mass, radiation damping, and excitation forces/torques in the relevant pitch-pitch and surge-pitch directions of motion are developed and used to calculate the system's response amplitude operator and the forces and moments acting on the foundation. The model is benchmarked against numerical simulations using WAMIT and WEC-Sim, showcasing excellent agreement. The sensitivity of plate thickness on the analytical hydrodynamic solutions is investigated over several thickness-to-width ratios ranging from 1:80 to 1:10. The results show that as the thickness of the benchmark OSWEC increases, the deviation of the analytical hydrodynamic coefficients from the numerical solutions grows from 3% to 25%. Differences in the excitation forces and torques, however, are contained within 12%. While the flat plate assumption is a limitation of the proposed analytical model, the error is within a reasonable margin for use in the design space exploration phase before a higher-fidelity (and thus more computationally expensive) model is employed. A parametric study demonstrates the ability of the analytical model to quickly sweep over a domain of OSWEC dimensions, illustrating the analytical model's utility in the early phases of design.

13 HYDRO ENERGY↗
DOE OSTI2026

Interaction of Molecular Hydrogen on α-Pu at 300 K: Nucleation of Hydrides and Pu-Catalyzed Carbides

An α-Pu sample was studied in its “as-received” and “sputtered” state by both X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectroscopy (ToF-SIMS). Analysis of the “as-received” surface indicated significant carbon and oxygen, with oxygen signal pertaining to plutonium dioxide (PuO 2 ) and sesquioxide (Pu 2 O 3 ). The “sputtered” clean metal surface was then dosed with hydrogen (H 2 ) gas at 300 K and found to nucleate hydride species (PuH x ). Interestingly, H 2 was observed to be critical for nucleation of carbides (Pu x C y ) by acting as a catalyst for Pu’s reaction with background gases. Because Pu metal has a high affinity for oxygen, reoxidation occurred under UHV, forming Pu x O y and disrupting both PuH x and Pu x C y growth. Observations from the experiments were modeled for the α-Pu(020) surface, illustrating the ability of H 2 to readily dissociate onto sputtered and speciated surfaces at 300 K. The projected density of states from these calculations were compared to experiments, showing good agreement between the Pu 5f, 6d, and 7s states and the H 1s, O 2p, and C 2p valence states. Overall, the above results indicated that the formed hydride layer is unstable at 300 K in UHV conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Resilient Control of Networked Microgrids Using Vertical Federated Reinforcement Learning: Designs and Real-Time Test-Bed Validations

Improving system-level resiliency of networked microgrids against adversarial cyber-attacks is an important aspect in the current regime of increased inverter-based resources (IBRs). To achieve that, this paper contributes in designing a hierarchical control layer, in conjunction with the existing control layers, resilient to adversarial attack signals. Considering model complexities, unknown dynamical behaviors of IBRs, and privacy issues regarding data sharing in multi-party-owned microgrids, designing such a control layer is non-trivial. Here, to tackle these issues, a novel federated reinforcement learning (Fed-RL) method is proposed. To grasp the interconnected dynamics of networked microgrids, the paper develops Federated Soft Actor-Critic (FedSAC) algorithm following the vertical structure of implementing Fed-RL. Next, utilizing the OpenAI Gym interface, we built a custom set-up in GridLAB-D/HELICS co-simulation platform, named Resilient RL Co-simulation (ResRLCoSIM), to train the RL agents with IEEE 123-bus benchmark comprising 3 interconnected microgrids. Finally, the learned policies in the simulation are transferred to the real-time hardware-in-the-loop (HIL) test-bed developed using the high-fidelity Hypersim platform. Finally, experiments show that the simulator-trained RL controllers achieve desirable performance with the test-bed platform, validating the minimization of the sim-to-real gap.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2026

Collaborative R&D with REEL Solar Inc (REEL) to Understand and Overcome Performance Limitations in CdTe Solar Cells: Cooperative Research and Development (Final Report)

This CRADA will focus on processing, advanced characterization, and testing of photovoltaic materials and devices to understand and improve REEL CdTe solar technology. This will include examining process variations and different buffer, absorber, and contact layers from REEL and NLR to maximize performance. The unique and diverse advanced characterization tools at NLR, such as time-resolved photoluminescence, capacitance-voltage measurements, electron beam scattered diffraction, cathodoluminescence, electron microscopy, TOF-SIMS, and other measurements will be applied to characterize REEL processing to improve understanding and guide experimental directions. Accelerated stability and potential induced degradation tests will be used to analyze metastability, short-and-long term degradation, and improve bankability. A second and major thrust this period will be joint development of Si/CdTe tandem solar cells to overcome industry wide terrestrial solar efficiency limits with the two lowest cost and manufacturable solar materials today. This will include developing novel transparent back contacts that can be incorporated into tandem structures and other novel solar applications, detailed analysis of designs and configurations for CdTe/Si tandem modules, and prototyping REEL CdTe Technology with Si bottom cells in tandem structures.

14 SOLAR ENERGY↗
DOE OSTI2025

Framework for Assessing Impact of Wave-Powered Desalination on Resilience of Coastal Communities

Coastal communities face unique challenges in maintaining continuous service from critical infrastructure. This research advances capabilities for evaluating the impact of using wave energy to desalinate water on the resilience of coastal communities. The study focuses on the feasibility of using wave energy conversion to provide drinking water to communities in need and applying resilience metrics to quantify its impact on the community. To assess the feasibility of wave-powered desalination, this research couples the open-source software Wave Energy Converter SIMulator (WEC-Sim) and Water Network Tool for Resilience (WNTR). This research explores variations in both the wave resource (location, seasonality, and duration) and the ability to maintain drinking water service during a disruption scenario by applying the simulation framework to three case studies, which are based on communities in Puerto Rico. The simulation framework provides a contextualized assessment of the ability of wave-powered desalination to improve the resilience of coastal communities, which can serve as a methodology for future studies seeking the integration of wave-powered desalination with water distribution systems.

16 TIDAL AND WAVE POWER↗
NASA NTRS2003

Picometer knowledge transfer: overview and status

The Picometer Knowledge Transfer testbed is one of several technology testbeds that will help to prove technology readiness for the Space Interferometry Mission (SIM).

picometer interferometer SIM↗
NASA NTRS1999

Space Interferometry Mission: A Systems Perspective

In 2006, NASA's Origins Program will launch the Space Interferometry Mission (SIM), a 10 meter baseline optical interferometry instrument, into a Earth trailing orbit.

SIM interferometry Space Interferometry Mission JP↗
NASA NTRS1996

Meteorology Gauges for Spatial Interferometry

Heterodyne interferometers have been commercially available for many years. In addition, many versions have been built at JPL for various projects. This activity is aimed at improving the accuracy of such interferometers from the 1-30 nanometer level to the picometer level for use in the proposes Stellar Interferometry Mission (SIM) as metrology gauges.

heterodyne interferometers heterodyne interferomet↗