Search NASA⌕ Search

SEARCH · Search NASA

Results for “SUPERSONIC AIRCRAFT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

An experimental study of the validity of the heat-field concept for sonic-boom alleviation

An experimental program was carried out in the NASA-Langley 4 ft x 4 ft supersonic pressure tunnel to investigate the validity of the heat-field concept for sonic boom alleviation. The concept involves heating the flow about a supersonic aircraft in such a manner as to obtain an increase in effective aircraft length and yield an effective aircraft shape that will result in a shock-free pressure signature on the ground. First, a basic body-of-revolution representing an SST configuration with its lift equivalence in volume was tested to provide a baseline pressure signature. Second, a model having a 5/2-power area distribution which, according to theory, should yield a linear pressure rise with no front shock wave was tested. Third, the concept of providing the 5/2-power area distribution by using an off-axis slender fin below the basic body was investigated. Then a substantial portion (approximately 40 percent) of the solid fin was replaced by a heat field generated by passing heated nitrogen through the rear of the fin.

Swigart, R. J.↗
NASA NTRS1974

Shock-induced separation of adiabatic turbulent boundary layers in supersonic axially symmetric internal flow

An experimental investigation at Mach 4 of shock-induced turbulent boundary layer separation at the walls of axially symmetric flow passages is discussed, with particular emphasis placed on determining the shock strengths required for incipient separation. The shock waves were produced by interchangeable sting-mounted cones placed on the axes of the flow passages and aligned with the freestream flow. The interactions under study simulate those encountered in axially symmetric engine inlets of supersonic aircraft. Knowledges of the shock strengths required for boundary layer separation in inlets is important since for shocks of somewhat greater strength rather drastic alterations in the inlet flow field may occur.

Page, R. J.↗
NASA NTRS1974

Mean and fluctuating flow measurements in axisymmetric supersonic boundary layer flow subjected to distributed adverse pressure gradients

Measurements have been made of the mean flow properties and turbulent fluctuations in adiabatic turbulent boundary layer flows subjected to distributed adverse pressure gradients. In the freestream region upstream of the adverse pressure gradient the Mach number was 3.86, the unit Reynolds number 5.3 million per foot. The boundary layer developed on the wall of an axisymmetric nozzle and straight test section. In order to avoid the effects of streamwise surface curvature the adverse pressure gradients at the test section wall were induced by contoured centerbodies mounted on the wind tunnel centerline. The flow under study simulated that which might be found in an axially symmetric engine inlet of a supersonic aircraft.

Gootzait, E.↗
NASA NTRS1973

Shuttle sonic boom - Technology and predictions

Because the shuttle differs significantly in both geometric and operational characteristics from conventional supersonic aircraft, estimation of sonic boom characteristics required a new technology base. The prediction procedures thus developed are reviewed. Flight measurements obtained for both the ascent and entry phases of the Apollo 15 and 16 and for the ascent phase only of the Apollo 17 missions are presented which verify the techniques established for application to shuttle. Results of extensive analysis of the sonic boom overpressure characteristics completed to date are presented which indicate that this factor of the shuttle's environmental impact is predictable, localized, of short duration and acceptable. Efforts are continuing to define the shuttle sonic boom characteristics to a fine level of detail based on the final system design.

Holloway, P. F.↗
NASA NTRS1974

Flowfield analysis for successive oblique shock wave-turbulent boundary-layer interactions

Description of a procedure for predicting the flowfields that develop when successive interactions between oblique shock waves and a turbulent boundary layer occur. Such interactions may occur, for example, in engine inlets for supersonic aircraft. A control volume analysis is used to predict changes in the flow field across the interactions. Two bleed flow models are considered. The predicted results are compared with measured results and are shown to be in good agreement when the bleed flow rate is low, or when there is no bleed. Shortcomings of the bleed flow models at higher bleed flow rates are discussed.

Sun, C.-C.↗
NASA NTRS1974

Chemical research projects office fuel tank sealants review

The status of high-temperature fuel tank sealants for military and potentially commercial supersonic aircraft is examined. The interrelationships of NASA's sealants program comprise synthesis and development of new fluoroether elastomers, sealant prediction studies, flight simulation and actual flight testing of best state-of-the-art fluorosilicone sealants. The technical accomplishments of these projects are reviewed.

Rosser, R. W.↗
NASA NTRS1974

Laboratory study of sonic booms and their scaling laws

This program undertook to seek a basic understanding of non-linear effects associated with caustics, through laboratory simulation experiments of sonic booms in a ballistic range and a coordinated theoretical study of scaling laws. Two cases of superbooms or enhanced sonic booms at caustics have been studied. The first case, referred to as acceleration superbooms, is related to the enhanced sonic booms generated during the acceleration maneuvers of supersonic aircrafts. The second case, referred to as refraction superbooms, involves the superbooms that are generated as a result of atmospheric refraction. Important theoretical and experimental results are briefly reported.

Toong, T. Y.↗
NASA NTRS1975

Supersonic propulsion

The Supersonic Cruise Airplane Research (SCAR) technology program is reported. Mission requirements, cycle considerations, engine evaluation, and SCAR test results are discussed. It is concluded that improved aerodynamics and structures, greater use of composites, and more-refined active controls are needed in the airframe area for designing an economically viable, environmental acceptable supersonic aircraft.

Whitlow, J. B., Jr.↗
NASA NTRS1974

A study of the effect of stratospheric aerosols produced by SST emissions on the albedo and climate of the earth

Hypothesized fleets of supersonic aircraft, flying at stratospheric altitude, may lead to a significant increase in the aerosol population of the stratosphere. Exact multiple scattering calculations have been carried out to determine the response of the earth's albedo to an increase of the stratospheric aerosol optical depth. It is found that a tripling of the aerosol population in the stratosphere, which represents an extreme upper limit to the effects of SST's, results in a 0.6% increase of the earth's reflectivity and a decrease of the mean surface temperature on the order of 0.3 K. Such changes could be marginally significant.

Pollack, J. B.↗
NASA NTRS1974

The Ames two-dimensional stratosphere-mesospheric model

A two-dimensional model of the stratosphere and mesosphere has recently been developed at Ames Research Center. The model contains chemistry based on 18 species that are solved for at each step and a seasonally-varying transport model based on both winds and eddy transport. The model is described and a preliminary assessment of the impact of supersonic aircraft flights on the ozone layer is given.

Whitten, R. C.↗
NASA NTRS1976

Flowfield analysis for successive oblique shock wave-turbulent boundary layer interactions

A computation procedure is described for predicting the flowfields which develop when successive interactions between oblique shock waves and a turbulent boundary layer occur. Such interactions may occur, for example, in engine inlets for supersonic aircraft. Computations are carried out for axisymmetric internal flows at M 3.82 and 2.82. The effect of boundary layer bleed is considered for the M 2.82 flow. A control volume analysis is used to predict changes in the flow field across the interactions. Two bleed flow models have been considered. A turbulent boundary layer program is used to compute changes in the boundary layer between the interactions. The results given are for flows with two shock wave interactions and for bleed at the second interaction site. In principle the method described may be extended to account for additional interactions. The predicted results are compared with measured results and are shown to be in good agreement when the bleed flow rate is low (on the order of 3% of the boundary layer mass flow), or when there is no bleed. As the bleed flow rate is increased, differences between the predicted and measured results become larger. Shortcomings of the bleed flow models at higher bleed flow rates are discussed.

Sun, C. C.↗
NASA NTRS1976

Development of a computer code for calculating the steady super/hypersonic inviscid flow around real configurations. Volume 1: Computational technique

A numerical procedure has been developed to compute the inviscid super/hypersonic flow field about complex vehicle geometries accurately and efficiently. A second order accurate finite difference scheme is used to integrate the three dimensional Euler equations in regions of continuous flow, while all shock waves are computed as discontinuities via the Rankine Hugoniot jump conditions. Conformal mappings are used to develop a computational grid. The effects of blunt nose entropy layers are computed in detail. Real gas effects for equilibrium air are included using curve fits of Mollier charts. Typical calculated results for shuttle orbiter, hypersonic transport, and supersonic aircraft configurations are included to demonstrate the usefulness of this tool.

Marconi, F.↗
NASA NTRS1976

Development of a computer code for calculating the steady super/hypersonic inviscid flow around real configurations. Volume 2: Code description

A numerical procedure was developed to compute the inviscid super/hypersonic flow field about complex vehicle geometries accurately and efficiently. A second-order accurate finite difference scheme is used to integrate the three-dimensional Euler equations in regions of continuous flow, while all shock waves are computed as discontinuities via the Rankine-Hugoniot jump conditions. Conformal mappings are used to develop a computational grid. The effects of blunt nose entropy layers are computed in detail. Real gas effects for equilibrium air are included using curve fits of Mollier charts. Typical calculated results for shuttle orbiter, hypersonic transport, and supersonic aircraft configurations are included to demonstrate the usefulness of this tool.

Marconi, F.↗
NASA NTRS1976

Turbulence measurements in axisymmetric supersonic boundary layer flow in adverse pressure gradients

Measurements have been made of the mean-flow and turbulence properties in adiabatic turbulent boundary layer flows subjected to adverse pressure gradients. In the freestream region upstream of the adverse pressure gradient the Mach number was 3.86, the unit Reynolds number 5.3 million per foot. The boundary layer developed on the wall of an axisymmetric nozzle and straight test section. The pressure gradients at the test section wall were induced by contoured centerbodies mounted on the wind tunnel centerline. The flow under study simulated that which might be found in an axially symmetric engine inlet of a supersonic aircraft. The results obtained have shown good agreement to exist between the measured normalized turbulent velocity fluctuations and the results from other recent investigations of compressible boundary layers.

Gootzait, E.↗
NASA NTRS1976

Ballistic range experiments on the superboom generated at increasing flight Mach numbers

Ballistic range experiments for the study of the propagation of converging shocks are described and the similarity between the observed phenomenon and that expected for superbooms created by accelerating supersonic aircraft is discussed. For weak shocks (shock Mach numbers of about 1.03), a structure resembling that of a folded shock predicted by geometrical acoustics theory is observed while for stronger shocks, a concave front with enhanced overpressure is recorded. Other results are in general accord with the basic concepts of shock propagation and in conjunction with some theoretical scaling laws indicate that the peak magnification of sonic booms due to aircraft flight acceleration in the real atmosphere should be in the range of 6 to 13.

Sanai, M.↗
NASA NTRS1976

SCAR program overview

The objectives, program elements, and distribution of research effort in the NASA AST/SCAR Program since its inception in July of 1972 are discussed. The data needed to make rational decisions in the consideration of future military and civil supersonic aircraft were the main directive.

Mclean, F. E.↗
NASA NTRS1977

Relative effects on atmospheric ozone of latitude and altitude of supersonic flight

Three calculations are reported of the potential depletion of ozone by supersonic aircraft. These calculations utilized a two-dimensional model and a three-dimensional photochemical-dynamical model of the atmosphere in which ozone and the dynamical variables of the atmosphere were derived simultaneously. All calculations were based on a continuous atmospheric injection of 1.8 million tons/yr of NO2. Injections of 45 deg N and 20 km, at equilibrium, resulted in a 36% increase in total odd nitrogen between 8 and 38 km and in global ozone depletion of approximately 12%. Injection at 45 deg N and 17 km produced a 27% increase in odd nitrogen, but, because much of this increase occurred below 20 km, the ozone depletion amounted to only 6%. Injection at 10 deg N and 29 km resulted in a 55% increase of odd nitrogen; however, although there was more depletion above 20 km altitude, there was less below that altitude, and the ozone depletion was only 12.5%. In all three calculations, at least half as much ozone depletion occurred in the Southern Hemisphere as in the Northern Hemisphere.

Cunnold, D. M.↗
NASA NTRS1977

A survey of computational aerodynamics in the United States

Programs in theoretical and computational aerodynamics in the United States are described. Those aspects of programs that relate to aeronautics are detailed. The role of analysis at various levels of sophistication is discussed as well as the inverse solution techniques that are of primary importance in design methodology. The research is divided into the broad categories of application for boundary layer flow, Navier-Stokes turbulence modeling, internal flows, two-dimensional configurations, subsonic and supersonic aircraft, transonic aircraft, and the space shuttle. A survey of representative work in each area is presented.

Gessow, A.↗