Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solar Eclipse”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Transit of Extrasolar Planets

During the past five years we have pursued the detection of extrasolar planets by the photometric transit method, i.e. the detection of a planet by watching for a drop in the brightness of the light as it crosses in front of a star. The planetary orbit must cross the line-of-sight and so most systems will not be lined up for such a transit to ever occur. However, we have looked at eclipsing binary systems which are already edge-on. Such systems must be very small in size as this makes the differential light change due to a transit much greater for a given planet size (the brightness difference will be proportional to the area of the transiting planet to the disc area of the star). Also, the planet forming region should be closer to the star as small stars are generally less luminous (that is, if the same thermal regime for planet formation applies as in the solar system). This led to studies of the habitable zone around other stars, as well. Finally, we discovered that our data could be used to detect giant planets without transits as we had been carefully timing the eclipses of the stars (using a GPS antenna for time) and this will drift by being offset by any giant planets orbiting around the system, as well. The best summary of our work may be to just summarize the 21 refereed papers produced during the time of this grant. This will be done is chronological order and in each section separately.

Doyle, Laurance R.↗
NASA NTRS1977

Solar power from satellites

Microwave beaming of satellite-collected solar energy to earth for conversion to useful industrial power is evaluated for feasibility, with attention given to system efficiencies and costs, ecological impact, hardware to be employed, available options for energy conversion and transmission, and orbiting and assembly. Advantages of such a power generation and conversion system are listed, plausible techniques for conversion of solar energy (thermionic, thermal electric, photovoltaic) and transmission to earth (lasers, arrays of mirrors, microwave beams) are compared. Structural fatigue likely to result from brief daily eclipses, 55% system efficiency at the present state of the art, present projections of system costs, and projected economic implications of the technology are assessed. Two-stage orbiting and assembly plans are described.

Glaser, P. E.↗
NASA NTRS2017

On-Orbit Structural Dynamics Performance of the Roll-Out Solar Array

The Roll-Out Solar Array (ROSA) flight experiment was launched to the International Space Station (ISS) on June 3rd, 2017. ROSA is an innovative, lightweight solar array with a flexible substrate that makes use of the stored strain energy in its composite structural members to provide deployment without the use of motors. This paper will discuss the results of various structural dynamics experiments conducted on the ISS during the weeks following launch. Data gathered from instrumentation on the solar array wing during the experiments are compared with pre-flight predictions from two different finite element modeling efforts. Two distinct methods were used to reconstruct the modal characteristics of ROSA from the data collected on orbit. Of particular interest in this effort are the first few system modes and mode shapes of the array, the amount of structural damping present, and degree of structural thermal interaction seen during eclipse exit. Discrepancies between the behavior predicted by the models and that observed on orbit are identified and discussed. The goal in this effort was to better understand the performance of ROSA and to improve modeling efforts for future designs of similar solar arrays.

Chamberlain, Matthew K.↗
NASA NTRS1986

Epsilon Aurigae in eclipse. II - Optical absorption lines from the secondary

Optical high-resolution 2.7-m McDonald Observatory observations of Epsilon Aur obtained during the 1982-1985 eclipse are discussed, with focus on the K I resonance lines, some Fe II and Ti II lines in the blue, and the near-infrared N I excitation lines. The N I lines are immune to contamination by the secondary, and their radial velocity decline over the three-year interval fits the predicted velocity curve. The 7664 A and 7699 A K I lines strengthen greatly during the eclipse due to gas in orbit around the secondary passing in front of the primary, and the velocity pattern analysis indicates a mass of the secondary to solar mass ratio of between about 3 and 6 and a primary mass of 3 solar masses. The data are consistent with the picture of a low-mass post-AGB primary having lost mass through a wind and by Roche-lobe transfer to the secondary, and which will evolve to a white dwarf in less than 10,000 years.

Lambert, D. L.↗
NASA NTRS1991

Ground test program for a full-size solar dynamic heat receiver

Test hardware, facilities, and procedures were developed to conduct ground testing of a full size, solar dynamic heat receiver in a partially simulated, low Earth orbit environment. The heat receiver was designed to supply 102 kW of thermal energy to a helium and xenon gas mixture continuously over a 94 minute orbit, including up to 36 minutes of eclipse. The purpose of the test program was to quantify the receiver thermodynamic performance, its operating temperatures, and thermal response to changes in environmental and power module interface boundary conditions. The heat receiver was tested in a vacuum chamber using liquid nitrogen cold shrouds and an aperture cold plate. Special test equipment were designed to provide the required ranges in interface boundary conditions that typify those expected or required for operation as part of the solar dynamic power module on the Space Station Freedom. The support hardware includes an infrared quartz lamp heater with 30 independently controllable zones and a closed Brayton cycle engine simulator to circulate and condition the helium xenon gas mixture. The test article, test support hardware, facilities, and instrumentation developed to conduct the ground test program are all described.

Sedgwick, L. M.↗
NASA NTRS1991

Ground test program for a full-size solar dynamic heat receiver

Test hardware, facilities, and procedures were developed to conduct ground testing of a full-size, solar dynamic heat receiver in a partially simulated, low earth orbit environment. The heat receiver was designed to supply 102 kW of thermal energy to a helium and xenon gas mixture continuously over a 94 minute orbit, including up to 36 minutes of eclipse. The purpose of the test program was to quantify the receiver thermodynamic performance, its operating temperatures, and thermal response to changes in environmental and power module interface boundary conditions. The heat receiver was tested in a vacuum chamber using liquid nitrogen cold shrouds and an aperture cold plate. Special test equipment was designed to provide the required ranges in interface boundary conditions that typify those expected or required for operation as part of the solar dynamic power module on the Space Station Freedom. The support hardware includes an infrared quartz lamp heater with 30 independently controllable zones and a closed-Brayton cycle engine simulator to circulate and condition the helium-xenon gas mixture. The test article, test support hardware, facilities, and instrumentation developed to conduct the ground test program are all described.

Sedgwick, L. M.↗
NASA NTRS1973

Optical observations of Sanduleak 160.

The variability of Sanduleak 160, the proposed optical counterpart of SMC X-1, has been confirmed. It shows a double-peaked optical variation with the minimum at X-ray eclipse being the deeper. The cos 2 theta variation has a semiamplitude of 0.050 mag in the B filter, the cos theta variation has a semiamplitude of 0.025 mag, and there is a cos 3 theta variation of 0.012 mag semiamplitude. From an analysis of the optical photometry and X-ray eclipse duration the mass ratio is found to be 0.28, i = 79 deg, and P = 3.89206 days. On the assumption that the mass of Sk 160 is 20 solar masses, the mass of SMC X-1 is 5.6 solar masses.

Petro, L.↗
NASA NTRS1984

A hot companion to Mu Sagittarii - An opportunity to sound the atmosphere of a B8 Ia supergiant

It is argued that the bright supergiant star Mu Sagittarii is accompanied by a smaller and hotter star, of spectral type approximately B1.5 V. The single-line radial-velocity curve of the B8 star leads to a fairly large mass function, f(m) = 2.64 solar masses, implying that the companion should have at least 50 percent of the mass of the visible star. Older optical observations indicated the presence of a shallow eclipse at the time of the conjunction with the supergiant behind the companion. Since the Copernicus, IUE, and Voyager observations show that the companion is the hotter component, that eclipse must have been the secondary eclipse (if it was an eclipse at all). A deeper, primary eclipse has been predicted by Plavec in 1978. It was indeed observed as a marked decrease of the far-ultraviolet flux from the system both with the Copernicus and the IUE satellites. The presence of a hotter but smaller component in Mu Sagittarii offers a unique opportunity to study the outer atmospheric layers of a supergiant which is of a much earlier spectral type than the supergiants in the Zeta Aurigae systems.

Polidan, R. S.↗
NASA NTRS2015

Soil Moisture Active and Passive (SMAP) White-Painted Expanded Polystyrene (EPS) Radome Survivability Test

NASA's SMAP Mission launched in January 2015 into a 685 km near-polar, sun-synchronous orbit. The SMAP instrument architecture incorporates an L-band radar and radiometer which share a common feedhorn and mesh reflector. The instrument rotates about the nadir axis at approximately 15 rpm, thereby providing a conically scanning wide swath antenna beam that is capable of achieving global coverage within three days. The radiometer and its associated electronics have tight thermal stability requirements in order to meet the required surface emittance measurement precision from space. Maintaining the thermal stabilities is quite challenging because the radiometer is located on a spinning platform that can either be in full sunlight or eclipse, and thus exposed to a highly transient environment. Stability requirements were met by integrating a light-weight Expanded Polystyrene (EPS) radome into the design to prevent solar illumination of the feed horn interior. The radome was painted white since the thermo-optical properties of bare sunlit EPS degrade rapidly over the three-year mission. Milling of the EPS and solvent within the white paint created cavities on the EPS surface which may introduce localized hot spots possibly violating the EPS glass transition temperature of 96degC and leading to structural integrity concerns. A three-day thermal test was conducted in a vacuum chamber to verify survivability of the radome during a simulated non-spin fault condition at end of mission. A portable solar simulator illuminated the test article and the beam irradiance was kept nearly constant during the entire 50 hour test, except during the first hour which simulated the expected 79degC on-orbit surface temperature of the radome. The test article survived based on the established pass criteria for three separate metrics: dimensional, optical property, and color. If any hot spots exist locally, they did not cause any observable permanent deformation when compared to pre- and post-test images. The test results increase confidence that there is a high probability that the radome will survive the worst-case scenario of a no-spin fault condition at the end of mission.

Mikhaylov, Rebecca↗
NASA NTRS2005

A Search for Transiting Neptune-Mass Extrasolar Planets in High-Precision Photometry of Solar-Type Stars

Tennessee State University operates several automatic photometric telescopes (APTs) at Fairborn Observatory in southern Arizona. Four 0.8 m APTs have been dedicated to measuring subtle luminosity variations that accompany magnetic cycles in solar-type stars. Over 1000 program and comparison stars have been observed every clear night in this program for up to 12 years with a precision of approximately 0.0015 mag for a single observation. We have developed a transit-search algorithm, based on fitting a computed transit template for each trial period, and have used it to search our photometric database for transits of unknown companions. Extensive simulations with the APT data have shown that we can reliably recover transits with periods under 10 days as long as the transits have a depth of at least 0.0024 mag, or about 1.6 times the scatter in the photometric observations. Thus, due to our high photometric precision, we are sensitive to transits of possible short-period Neptune-mass planets that likely would have escaped detection by current radial velocity techniques. Our search of the APT data sets for 1087 program and comparison stars revealed no new transiting planets. However, the detection of several unknown grazing eclipsing binaries from among our comparison stars, with eclipse depths of only a few millimags, illustrates the success of our technique. We have used this negative result to place limits on the frequency of Neptune-mass planets in close orbits around solar-type stars in the Sun's vicinity.

Henry, Stephen M.↗
NASA NTRS1987

The moderately interacting Algol binary RS Cephei

In agreement with previous observers, it is found that the eclipsing binary RS Cep is an Algol-type semidetached system. From IUE spectra and Lick Observatory optical scans, the spectral types of the components are determined as B9.7e V + G8 III-IV. The effective temperature of the primary star is found to be 9670 K (with an uncertainty of about 150 K). From the photometric elements, the spectral types, and the semidetached nature of the system, a satisfactory model of the system is developed, giving masses 2.4 and 0.4 solar mass, radii 2.3 and 7.6 solar radii, and separation of the components 32 solar radii. This model leads to a distance of 910 pc; the color excess is E(B - V) = 0.03 mag. Balmer emission lines are observed in the optical scans, so that the system is a Be star. An IUE spectrum obtained during the total primary eclipse reveals a number of UV emission lines, typical for interacting Algols and W Ser stars. Power emitted in these lines is about twice as high as that in TT Hya or U Cep, therefore, RS Cep is a relatively active Algol system. A broad 'bulge' of excess relative flux is observed roughly between wavelengths 210 and 270 nm in the totality spectrum, and interpreted as broad blends of emission lines of Fe II; the same Fe II lines, formed in a circumstellar shell or disk, cause additional absorption in the out-of-eclipse spectra.

Plavec, Mirek J.↗
NASA NTRS1977

On the evolution of the lunar orbit

It is generally accepted that the earth-moon separation is at present increasing due to tidal dissipation. Values for the corresponding lunar deceleration and the related slowing of the earth's rotation are obtained from astronomical observations and studies of ancient eclipses. Extrapolation of these values leads to a close approach of the earth and moon 1-3 b.y. BP. Periodicities in the Precambrian stromatolites may yield the number of solar days in a lunar month prior to 500 m.y. BP. These data combined with dynamic constraints on the number of solar days in a lunar month indicate a close approach of the earth and moon at 2.85 plus or minus 0.25 b.y. BP. Mare volcanism on the moon and high-temperature Archean volcanism on the earth prior to this date may be due to tidal heating. Strong tidal heating during a close approach could have contributed to the formation of the first living organisms.

Turcotte, D. L.↗
NASA NTRS1990

Thermal analysis of a strongback structure for a high-frequency microwave antenna concept in geosynchronous orbit

The effects of the geosynchronous thermal environment on the performance of a tetrahedral truss strongback structure for a high-frequency microwave antenna concept for earth science monitoring have been studied. Two orbit conditions (an equinox orbit with a 72-minute eclipse and a solstice orbit with no eclipse) and a range of thermal control approaches were investigated under steady state and transient conditions. The thermal control approaches included aluminum surface coatings with high and low solar-absorptivity-to-infrared-emissivity ratios, multi-layer insulation, a sun shield, and various truss element materials. The effects of both earth shadowing and shadowing by the antenna reflector on temperatures were also examined. Temperatures and corresponding structural distortion results are presented.

Farmer, Jeffery T.↗
NASA NTRS1995

Large-scale structure of the solar corona and inner heliosphere

The large-scale structure of the solar corona influences solar activity particularly coronal mass ejections (CMEs). The helmet streamers that are observed to dominate the structure of the inner corona are formed by the interaction of the solar wind with coronal magnetic fields. We have simulated this interaction in three dimensions using the magnetohydrodynamic (MHD) equations. In order to create a realistic model, we use the magnetic field that is observed at the Sun's surface (deduced from daily Wilcox Solar Observatory magnetograms) as input, in combination with specified density and temperature profiles at the surface. A self-consistent 3D solar-wind solution is developed by integrating the MHD equations in time to steady state. Such solutions can reproduce the observed structures that are seen in coronagraph images and eclipse photographs of the corona. This model allows us to accurately determine the position of the heliospheric current sheet. We will compare the results obtained from our model with Ulysses observations during the period May-June 1993, and with an eclipse photograph of the corona on November 3, 1994.

Mikic, Z.↗
NASA NTRS2001

Flywheel Charge/Discharge Control Developed

A control algorithm developed at the NASA Glenn Research Center will allow a flywheel energy storage system to interface with the electrical bus of a space power system. The controller allows the flywheel to operate in both charge and discharge modes. Charge mode is used to store additional energy generated by the solar arrays on the spacecraft during insolation. During charge mode, the flywheel spins up to store the additional electrical energy as rotational mechanical energy. Discharge mode is used during eclipse when the flywheel provides the power to the spacecraft. During discharge mode, the flywheel spins down to release the stored rotational energy.

Beach, Raymond.F.↗
NASA NTRS2011

Heliocentric Distance of Coronal Mass Ejections at the Time of Energetic Particle Release: Revisiting the Ground Level Enhancement Events of Solar Cycle 23

Using the kinematics of coronal mass ejections (CMEs), onset time of soft X-ray flares, and the finite size of the pre-eruption CME structure, we derive the heliocentric distan~e at which the energetic particles during the ground level enhancement (GLE) events of Solar Cycle 23. We find that the GLE particles are released when the CMEs reach an average heliocentric distance of approx.3.25 solar radii (Rs). From this we infer that the shocks accelerating the particles are located at similar heights. Type II radio burst observations indicate that the CMEs are at much lower distances (average approx.1.4 Rs) when the CME-driven shock first forms. The shock seems to travel approx.1.8 Rs over a period of approox.30 min on the average before releasing the GLE particles. In deriving these results, we made three assumptions that have observational support: (i) the CME lift off occurs from an initial distance of about 1.25 Rs; (ii) the flare onset and CME onset are one and the same because these are two different manifestations of the same eruption; and (iii) the CME has positive acceleration from the onset to the first appearance in the coronagraphic field of view (2.5 to 6 Rs). Observations of coronal cavities in eclipse pictures and in coronagraphic images justify the assumption (i). The close relationship between the flare reconnection magnetic flux and the azimuthal flux of interplanetary magnetic clouds justify assumption (ii) consistent with the standard model (CSHKP) of solar eruption. Coronagraphic observations made close to the solar surface indicate a large positive acceleration of CMEs to a heliocentric distance of approx.3 Rs before they start slowing down due to the drag force. The inferred acceleration (approx.1.5 km/s/s) is consistent with reported values in the literature.

Gopalswamy, Natchimuthuk↗
NASA NTRS1989

Space Station Freedom photovoltaic power module design status

Electric power generation for Space Station Freedom will be provided by four photovoltaic (PV) power modules using silicon solar cells during Phase 1 operation. Each PV power module requires two solar arrays with 32,800 solar cells generating 18.75 kW of dc power for a total of 75 kW. A portion of this power will be stored in nickel-hydrogen batteries for use during eclipse, and the balance will be processed and converted to 20 kHz ac power for distribution to end users through the power management and distribution system. The design incorporates an optimized thermal control system, pointing and tracking provision with the application of gimbals, and the use of orbital replacement units (ORU's) to achieve modularization. Design status of the PV power module, as derived from major trade studies, is discussed at hardware levels ranging from component to system. Details of the design are presented where appropriate.

Jimenez, Amador P.↗
NASA NTRS1989

Space Station Freedom photovoltaic power module design status

Electric power generation for the Space Station Freedom will be provided by four photovoltaic (PV) power modules using silicon solar cells during phase I operation. Each PV power module requires two solar arrays with 32,800 solar cells generating 18.75 kW of dc power for a total of 75 kW. A portion of this power will be stored in nickel-hydrogen batteries for use during eclipse, and the balance will be processed and converted to 20 kHz ac power for distribution to end users through the power management and distribution system. The design incorporates an optimized thermal control system, pointing and tracking provision with the application of gimbals, and the use of orbital replacement units to achieve modularization. The design status of the PV power module, as derived from major trade studies, is discussed at hardware levels ranging from component to system. Details of the design are presented where appropriate.

Jimenez, Amador P.↗