SEARCH · Search NASA

Results for “Source Code”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

All sources NASA NTRS DOE OSTI

NASA NTRS2014

Verification of a New NOAA/NSIDC Passive Microwave Sea-Ice Concentration Climate Record

A new satellite-based passive microwave sea-ice concentration product developed for the National Oceanic and Atmospheric Administration (NOAA)Climate Data Record (CDR) programme is evaluated via comparison with other passive microwave-derived estimates. The new product leverages two well-established concentration algorithms, known as the NASA Team and Bootstrap, both developed at and produced by the National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GSFC). The sea ice estimates compare well with similar GSFC products while also fulfilling all NOAA CDR initial operation capability (IOC) requirements, including (1) self describing file format, (2) ISO 19115-2 compliant collection-level metadata,(3) Climate and Forecast (CF) compliant file-level metadata, (4) grid-cell level metadata (data quality fields), (5) fully automated and reproducible processing and (6) open online access to full documentation with version control, including source code and an algorithm theoretical basic document. The primary limitations of the GSFC products are lack of metadata and use of untracked manual corrections to the output fields. Smaller differences occur from minor variations in processing methods by the National Snow and Ice Data Center (for the CDR fields) and NASA (for the GSFC fields). The CDR concentrations do have some differences from the constituent GSFC concentrations, but trends and variability are not substantially different.

Passive Microwave↗

NASA NTRS2014

Federated Giovanni: A Distributed Web Service for Analysis and Visualization of Remote Sensing Data

The Geospatial Interactive Online Visualization and Analysis Interface (Giovanni) is a popular tool for users of the Goddard Earth Sciences Data and Information Services Center (GES DISC) and has been in use for over a decade. It provides a wide variety of algorithms and visualizations to explore large remote sensing datasets without having to download the data and without having to write readers and visualizers for it. Giovanni is now being extended to enable its capabilities at other data centers within the Earth Observing System Data and Information System (EOSDIS). This Federated Giovanni will allow four other data centers to add and maintain their data within Giovanni on behalf of their user community. Those data centers are the Physical Oceanography Distributed Active Archive Center (PO.DAAC), MODIS Adaptive Processing System (MODAPS), Ocean Biology Processing Group (OBPG), and Land Processes Distributed Active Archive Center (LP DAAC). Three tiers are supported: Tier 1 (GES DISC-hosted) gives the remote data center a data management interface to add and maintain data, which are provided through the Giovanni instance at the GES DISC. Tier 2 packages Giovanni up as a virtual machine for distribution to and deployment by the other data centers. Data variables are shared among data centers by sharing documents from the Solr database that underpins Giovanni's data management capabilities. However, each data center maintains their own instance of Giovanni, exposing the variables of most interest to their user community. Tier 3 is a Shared Source model, in which the data centers cooperate to extend the infrastructure by contributing source code.

Giovanni↗

NASA NTRS2015

Data Processing And Machine Learning Methods For Multi-Modal Operator State Classification Systems

This document is intended as an introduction to a set of common signal processing learning methods that may be used in the software portion of a functional crew state monitoring system. This includes overviews of both the theory of the methods involved, as well as examples of implementation. Practical considerations are discussed for implementing modular, flexible, and scalable processing and classification software for a multi-modal, multi-channel monitoring system. Example source code is also given for all of the discussed processing and classification methods.

Machine learning↗

NASA NTRS2015

Formal Assurance Arguments: A Solution In Search of a Problem?

An assurance case comprises evidence and argument showing how that evidence supports assurance claims (e.g., about safety or security). It is unsurprising that some computer scientists have proposed formalizing assurance arguments: most associate formality with rigor. But while engineers can sometimes prove that source code refines a formal specification, it is not clear that formalization will improve assurance arguments or that this benefit is worth its cost. For example, formalization might reduce the benefits of argumentation by limiting the audience to people who can read formal logic. In this paper, we present (1) a systematic survey of the literature surrounding formal assurance arguments, (2) an analysis of errors that formalism can help to eliminate, (3) a discussion of existing evidence, and (4) suggestions for experimental work to definitively answer the question.

Graydon, Patrick J.↗

NASA NTRS2017

Application of Exactly Linearized Error Transport Equations to AIAA CFD Prediction Workshops

The computational fluid dynamics (CFD) prediction workshops sponsored by the AIAA have created invaluable opportunities in which to discuss the predictive capabilities of CFD in areas in which it has struggled, e.g., cruise drag, high-lift, and sonic boom pre diction. While there are many factors that contribute to disagreement between simulated and experimental results, such as modeling or discretization error, quantifying the errors contained in a simulation is important for those who make decisions based on the computational results. The linearized error transport equations (ETE) combined with a truncation error estimate is a method to quantify one source of errors. The ETE are implemented with a complex-step method to provide an exact linearization with minimal source code modifications to CFD and multidisciplinary analysis methods. The equivalency of adjoint and linearized ETE functional error correction is demonstrated. Uniformly refined grids from a series of AIAA prediction workshops demonstrate the utility of ETE for multidisciplinary analysis with a connection between estimated discretization error and (resolved or under-resolved) flow features.

Derlaga, Joseph M.↗

NASA NTRS2017

Progress of High Efficiency Centrifugal Compressor Simulations Using TURBO

Three-dimensional, time-accurate, and phase-lagged computational fluid dynamics (CFD) simulations of the High Efficiency Centrifugal Compressor (HECC) stage were generated using the TURBO solver. Changes to the TURBO Parallel Version 4 source code were made in order to properly model the no-slip boundary condition along the spinning hub region for centrifugal impellers. A startup procedure was developed to generate a converged flow field in TURBO. This procedure initialized computations on a coarsened mesh generated by the Turbomachinery Gridding System (TGS) and relied on a method of systematically increasing wheel speed and backpressure. Baseline design-speed TURBO results generally overpredicted total pressure ratio, adiabatic efficiency, and the choking flow rate of the HECC stage as compared with the design-intent CFD results of Code Leo. Including diffuser fillet geometry in the TURBO computation resulted in a 0.6 percent reduction in the choking flow rate and led to a better match with design-intent CFD. Diffuser fillets reduced annulus cross-sectional area but also reduced corner separation, and thus blockage, in the diffuser passage. It was found that the TURBO computations are somewhat insensitive to inlet total pressure changing from the TURBO default inlet pressure of 14.7 pounds per square inch (101.35 kilopascals) down to 11.0 pounds per square inch (75.83 kilopascals), the inlet pressure of the component test. Off-design tip clearance was modeled in TURBO in two computations: one in which the blade tip geometry was trimmed by 12 mils (0.3048 millimeters), and another in which the hub flow path was moved to reflect a 12-mil axial shift in the impeller hub, creating a step at the hub. The one-dimensional results of these two computations indicate non-negligible differences between the two modeling approaches.

turbomachinery↗

NASA NTRS2017

It's Only a Phase: Applying the 5 Phases of Clinical Trials to the NSCR Model Improvement Process

NASA limits astronaut radiation exposures to a 3% risk of exposure-induced death from cancer (REID) at the upper 95% confidence level. Since astronauts approach this limit, it is important that the estimate of REID be as accurate as possible. The NASA Space Cancer Risk 2012 (NSCR-2012) model has been the standard for NASA's space radiation protection guidelines since its publication in 2013. The model incorporates elements from U.S. baseline statistics, Japanese atomic bomb survivor research, animal models, cellular studies, and radiation transport to calculate astronaut baseline risk of cancer and REID. The NSCR model is under constant revision to ensure emerging research is incorporated into radiation protection standards. It is important to develop guidelines, however, to determine what new research is appropriate for integration. Certain standards of transparency are necessary in order to assess data quality, statistical quality, and analytical quality. To this effect, all original source code and any raw data used to develop the code are required to confirm there are no errors which significantly change reported outcomes. It is possible to apply a clinical trials approach to select and assess the improvement concepts that will be incorporated into future iterations of NSCR. This poster describes the five phases of clinical trials research, pre-clinical research, and clinical research phases I-IV, explaining how each step can be translated into an appropriate NSCR model selection guideline.

Elgart, S. R.↗

NASA NTRS2016

Squat Biomechanical Modeling Results from Exercising on the Hybrid Ultimate Lifting Kit

Long duration space travel will expose astronauts to extended periods of reduced gravity. Since gravity is not present to aid loading, astronauts will use resistive and aerobic exercise regimes for the duration of the space flight to minimize loss of bone density, muscle mass and aerobic capacity that occurs during exposure to a reduced gravity environment. Unlike the International Space Station (ISS), the area available for an exercise device in the next generation of spacecraft is limited and therefore compact resistance exercise device prototypes are being developed. The Advanced Resistive Exercise Device (ARED) currently on the ISS is being used as a benchmark for the functional performance of these new devices. Biomechanical data collection and computational modeling aid the device design process by quantifying the joint torques and the musculoskeletal forces that occur during exercises performed on the prototype devices. The computational models currently under development utilize the OpenSim software, an open source code for musculoskeletal modeling, with biomechanical input data from test subjects for estimation of muscle and joint loads. The subjects are instrumented with reflective markers for motion capture data collection while exercising on the Hybrid Ultimate Lifting Kit (HULK) prototype device. Ground reaction force data is collected with force plates under the feet and device loading is recorded through load cells internal to the HULK. Test variables include applied device load, narrow or wide foot stance, slow or fast cadence and the harness or long bar interface between the test subject and the device. Data is also obtained using free weights for a comparison to the resistively loaded exercise device. This data is input into the OpenSim biomechanical model, which has been scaled to match the anthropometrics of the test subject, to calculate the body loads. The focus of this presentation is to summarize the results from the full squat exercises across the different test variables.

Bioengineering↗

NASA NTRS2016

Biomechanical Modeling of Split-leg Squat and Heel Raise on the Hybrid Ultimate Lifting Kit (HULK)

Long duration space travel will expose astronauts to extended periods of reduced gravity. Since gravity is not present to aid loading, astronauts will use resistive and aerobic exercise regimes for the duration of the space flight to minimize the loss of bone density, muscle mass and aerobic capacity that occurs during exposure to a reduced gravity environment. Unlike the International Space Station (ISS), the area available for an exercise device in the next generation of spacecraft is limited and therefore compact resistance exercise device prototypes are being developed. The Advanced Resistive Exercise Device (ARED) currently on the ISS is being used as a benchmark for the functional performance of these new devices. Biomechanical data collection and computational modeling aid the device design process by quantifying the joint torques and musculoskeletal forces that occur during exercises performed on the prototype devices. Computational models currently use OpenSim software, an open source code for musculoskeletal modeling, with biomechanical input data from subjects for estimation of muscle and joint loads. Subjects are instrumented with reflective markers for motion capture data collection while exercising on the Hybrid Ultimate Lifting Kit (HULK) prototype device. Ground reaction force data is collected with force plates under the feet and device loading is recorded through load cells internal to the HULK. This data is input into the OpenSim biomechanical model, which has been scaled to match the anthropometrics of the test subject, to calculate the loads on the body. Multiple exercises are performed and evaluated during a test session such as a full squat, single leg squat, heel raise and dead lift. Variables for these exercises include applied device load, narrow or wide foot stance, slow or fast cadence and the harness or long bar interface between the test subject and the device. Data from free weights are compared to the resistively loaded exercise device. The focus of this presentation is to summarize the results from the single-leg squat and heel raise exercises performed during three sessions occurring in 2015. Differences in loading configuration, cadence and stance produce differences in kinematics, joint toques and force and muscle forces.

computational modeling↗

NASA NTRS2017

Biomechanical Modeling Analysis of Loads Configuration for Squat Exercise

INTRODUCTION: Long duration space travel will expose astronauts to extended periods of reduced gravity. Since gravity is not present to assist loading, astronauts will use resistive and aerobic exercise regimes for the duration of the space flight to minimize loss of bone density, muscle mass and aerobic capacity that occurs during exposure to a reduced gravity environment. Unlike the International Space Station (ISS), the area available for an exercise device in the next generation of spacecraft for travel to the Moon or to Mars is limited and therefore compact resistance exercise device prototypes are being developed. The Advanced Resistive Exercise Device (ARED) currently on the ISS is being used as a benchmark for the functional performance of these new devices. Biomechanical data collection and computational modeling aid the device design process by quantifying the joint torques and the musculoskeletal forces that occur during exercises performed on the prototype devices. METHODS The computational models currently under development utilize the OpenSim [1] software platform, consisting of open source code for musculoskeletal modeling, using biomechanical input data from test subjects for estimation of muscle and joint loads. The OpenSim Full Body Model [2] is used for all analyses. The model incorporates simplified wrap surfaces, a new knee model and updated lower body muscle parameters derived from cadaver measurements and magnetic resonance imaging of young adults. The upper body uses torque actuators at the lumbar and extremity joints. The test subjects who volunteer for this study are instrumented with reflective markers for motion capture data collection while performing squat exercising on the Hybrid Ultimate Lifting Kit (HULK) prototype device (ZIN Technologies, Middleburg Heights, OH). Ground reaction force data is collected with force plates under the feet, and device loading is recorded through load cells internal to the HULK. Test variables include the applied device load and the dual cable long bar or single cable T-bar interface between the test subject and the device. Data is also obtained using free weights with the identical loading for a comparison to the resistively loaded exercise device trials. The data drives the OpenSim biomechanical model, which has been scaled to match the anthropometrics of the test subject, to calculate the body loads. RESULTS Lower body kinematics, joint moments, joint forces and muscle forces are obtained from the OpenSim biomechanical analysis of the squat exercises under different loading conditions. Preliminary results from the model for the loading conditions will be presented as will hypotheses developed for follow on work.

Human Factors Engineering↗

NASA NTRS2014

External Dependencies-Driven Architecture Discovery and Analysis of Implemented Systems

A method for architecture discovery and analysis of implemented systems (AIS) is disclosed. The premise of the method is that architecture decisions are inspired and influenced by the external entities that the software system makes use of. Examples of such external entities are COTS components, frameworks, and ultimately even the programming language itself and its libraries. Traces of these architecture decisions can thus be found in the implemented software and is manifested in the way software systems use such external entities. While this fact is often ignored in contemporary reverse engineering methods, the AIS method actively leverages and makes use of the dependencies to external entities as a starting point for the architecture discovery. The AIS method is demonstrated using the NASA's Space Network Access System (SNAS). The results show that, with abundant evidence, the method offers reusable and repeatable guidelines for discovering the architecture and locating potential risks (e.g. low testability, decreased performance) that are hidden deep in the implementation. The analysis is conducted by using external dependencies to identify, classify and review a minimal set of key source code files. Given the benefits of analyzing external dependencies as a way to discover architectures, it is argued that external dependencies deserve to be treated as first-class citizens during reverse engineering. The current structure of a knowledge base of external entities and analysis questions with strategies for getting answers is also discussed.

Ganesan, Dharmalingam↗

NASA NTRS2018

System Applications Software Development and Testing for the Spaceport Command and Control System

Known as "America's Spaceport," one of Kennedy Space Center's (KSC) primary responsibilities is the successful preparation for and launch of rockets into space. KSC's Engineering Software Branch has been tasked with creating a new command and control system that will provide check-out and launch control for future rockets and spacecraft. While work on the software began several years ago, development is ongoing and the operators who use the software on a daily basis have requested several features to improve their user experience. My internship in the fall of 2018 involved developing the source code and unit tests for two of these requested features: "Display Data with Persistence" (DDP) and "Save Events Button" (SEB). DDP's primary goal is to aid with ergonomics. Currently, users must press-and-hold on the mouse button to display information about points on a data plot. Once DDP is integrated, users will have the ability to double-click on a data plot to display that same information with persistence. Independent from DDP, the SEB provides users the ability to take information about different events that occur in the control system and save that data into a simple Comma Separated File (.csv) file format for easier analysis at a future time.

Niemoeller, Samantha↗

NASA NTRS2019

Approximate Entropy and Sample Entropy: A Comprehensive Tutorial

Approximate Entropy and Sample Entropy are two algorithms for determining the regularity of series of data based on the existence of patterns. Despite their similarities, the theoretical ideas behind those techniques are different but usually ignored. This paper aims to be a complete guideline of the theory and application of the algorithms, intended to explain their characteristics in detail to researchers from different fields. While initially developed for physiological applications, both algorithms have been used in other fields such as medicine, telecommunications, economics or Earth sciences. In this paper, we explain the theoretical aspects involving Information Theory and Chaos Theory, provide simple source codes for their computation, and illustrate the techniques with a step by step example of how to use the algorithms properly. This paper is not intended to be an exhaustive review of all previous applications of the algorithms but rather a comprehensive tutorial where no previous knowledge isrequired to understand the methodology.

Delgado-Bonal, Alfonso↗

NASA NTRS2019

IKOS: Sound Static Program Analysis

IKOS (Inference Kernel for Open Static Analyzers) is a static analyzer for C/C++ based on the theory of Abstract Interpretation. It can detect or prove the absence of runtime errors (e.g, buffer overflows, integer overflows, null pointer dereferences, etc.) in the source code. IKOS uses Abstract Interpretation techniques to compute an over-approximation of all the reachable states of the program, thus it cannot miss a bug. In this talk, I will give an overview of the tool, then show how to apply it to a large software. I will present ikos-view, a web interface to examine the analysis results. I will discuss about methods to improve the analysis, such as adding code annotations, modeling library functions, and avoiding specific code patterns.

Arthaud, Maxime↗

NASA NTRS2019

Reusing Data and Metadata to Create New Metadata Through Machine-Learning & Other Programmatic Methods

Recent improvements in natural language processing (NLP) enable metadata to be created programmatically from reused original metadata or even the dataset itself. Transfer-learning applied to NLP has greatly improved performance and reduced training data requirements. In this talk, we’ll compare machine-generated metadata to human-generated metadata and discuss characteristics of metadata and data archives that affect suitability for machine-learning reuse of metadata. Where as human-generated metadata is often populated once, populated from the perspective of data supplier, populated by many individuals with different words for the same thing, and limited in length, machine-generated metadata can be updated any number of times, generated from the perspective of any user, constrained to a standardized set of terms that can be evolved over time, and be any length required. Machine-learning generated metadata offers benefits but also additional needs in terms of version control, process transparency, human-computer interaction, and IT requirements. As a successful example, we’ll discuss how a dataset of abstracts and associated human-tagged keywords from a standardized list of several thousand keywords were used to create a machine-learning model that predicted keyword metadata for open-source code projects on code.nasa.gov. We’ll also discuss a less successful example from data.nasa.gov to show how data archive architecture and characteristics of initial metadata can be strong controls on how easy it is to leverage programmatic methods to reuse metadata to create additional metadata.

Gosses, Justin↗

NASA NTRS2019

Creating Data-Driven Vector Visualizations of Satellite Orbit Tracks Using NASA GIBS and Worldview

NASA Earth Observing System (EOS) currently operates dozens of remote sensing satellites, many of which can be viewed directly in NASA’s open-source Worldview application. Much of this satellite imagery can be viewed in near-real time as it is processed and served by NASA’s Global Imagery Browse Service (GIBS). To better educate users on the time and location of imagery, GIBS serves orbit track specific layers for each satellite. Worldview has historically served these layers as raster images but recent updates have enabled the application to now serve these layers using vector tiles. With the release of Worldview v3.0, orbit track layers can be displayed using mapbox vector tiles (MVT). This visualization format allows users to not only view and change the color of orbit track layers, as they could do previously with rasters, but also inspect individual vector points and filter layers by specific parameters such as time. The data contained within a MVT is further enhanced in Worldview with the combination of a JSON description file served from GIBS used to describe the MVT data. This presentation will provide an overview of the process of consuming orbit track vector tiles and data files from GIBS using a pipeline to configure, build and ultimately display the orbit tracks in Worldview. Furthermore, the presentation aims to describe how others can leverage our open-source code to display and enhance vector layers in their own applications.

Rice, Zachary↗

NASA NTRS2018

T-infinity: The Dependency Inversion Principle for Rapid and Sustainable Multidisciplinary Software Development

The CFD Vision 2030 Study recommends that, “NASA should develop and maintain an integrated simulation and software development infrastructure to enable rapid CFD technology maturation.... [S]oftware standards and interfaces must be emphasized and supported whenever possible, and open source models for noncritical technology components should be adopted.” The current paper presents an approach to an open source development architecture, named T-infinity, for accelerated research in CFD leveraging the Dependency Inversion Principle to realize plugins that communicate through collections of functions without exposing internal data structures. Steady state flow visualization, mesh adaptation, fluid-structure interaction, and overset domain capabilities are demonstrated through compositions of plugins via standardized abstract interfaces without the need for source code dependencies between disciplines. Plugins interact through abstract interfaces thereby avoiding N 2 direct code-to-code data structure coupling where N is the number of codes. This plugin architecture enhances sustainable development by controlling the interaction between components to limit software complexity growth. The use of T-infinity abstract interfaces enables multidisciplinary application developers to leverage legacy applications alongside newly-developed capabilities. While rein, a description of interface details is deferred until the are more thoroughly tested and can be closed to modification.

O'Connell, Matthew D.↗

NASA NTRSDate not supplied

TPSAS-NF1676L-18458-DND

Motivation - Development of NASA Langley CFD solvers was traditionally lead by one or two people - Resulted in tools that are vulnerable to the loss of a single person - Rigorous and repeatable testing environments were rare - Standardization, portability, and performance was often overlooked - Informal or no source code version control - Low-level collaboration within NASA Langley very difficult; off-site collaborations near impossible

Mike Park↗