Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Effect of Rice Husk Derived Nanosilica on the Structure, Properties and Biodegradability of Corn-Starch/LDPE Composites

Development of material with enhanced mechanical properties and biodegradability by the incorporation of synthesized inorganic nanostructured mesoporous silica from rice husk has been investigated. The produced nanosilica (≈ 25 nm and 213.045 m{sup 2}/g surface area) and nanosilica blended LDPE/starch composites were extensively characterised by SEM, FTIR, XRD, XRF, TEM, EDAX and TGA analysis. The low cost of production estimated, ensures its feasibility toward large scale application. The addition of nanosilica into the matrix led to the enhancement of Young’s modulus and stiffness by a value of 535.6 MPa and 32172.81 N/m respectively at 3% nanosilica content, thereby enhancing the initial rigidity and resistivity towards deformation making a better biodegradable substitute in terms of initial application range. The MFI and hardness value also increased with increase of silica content upto 1.5% and 2% respectively to 7.23 g/10 min and 42 (Shor D). Increase in nanofiller content improved the value of degradation rate constant (k) of the weight loss data plot in both vegetable waste and garden soil environment. The addition of 1.5% of nanosilica to a blend of 80% LDPE and 20% starch showed almost the same biodegradation rate as that without nanosilica but with superior mechanical properties and applicability range.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Comparative Magnetic and Structural Properties Study of Micro- and Nanopowders of Nd{sub 2}Fe{sub 14}B Doped with Ni

Micropowders of melted and heat-treated Nd{sub 16}(Fe{sub 76−x}Ni{sub x})B{sub 8} alloys system, with x = 0, 10, 20, and 25 (size distribution under 20 μm), were studied and compared with the study of nanopowders obtained, from the previous ones, by surfactant-assisted ball-milling process during 2 h. By XRD, a majority of Nd{sub 2}Fe{sub 14}B hard phase and a minority of α-Fe, Nd{sub 1.1}Fe{sub 4}B{sub 4} and NdNi{sub 2} phases were detected. The last one increases with Ni content. The crystallite size of the hard phase, in both types of samples, is not affected by the Ni content; however, the grains in micropowders are oblate, with a mean size of 37 nm, while those of the nanopowders are symmetric, with a mean size of 35 nm. Mössbauer spectra were fitted with seven sextets, which correspond to the six ferromagnetic sites of the hard phase and that of the α-Fe, and a doublet corresponding to the paramagnetic Nd{sub 1.1}Fe{sub 4}B{sub 4} phase. The mean hyperfine magnetic field, for both types of samples, decreases with Ni content. The hysteresis loops of both types of samples show a hard magnetic character, however, the coercive field and the M{sub r}/M{sub s} values for nanopowders are greater than those obtained for micropowders for all the Ni contents. Values of H{sub c} = 2 kOe and M{sub r}/ M{sub s} = 0.54 were obtained for nanopowders with 10 at.% Ni. From the hysteresis loops, which include the initial magnetization curve, Henkel plots for all the samples were obtained. These plots show that for micropowders, the predominant magnetic interaction is of dipolar type, while for nanopowders, the ferromagnetic exchange is the predominant one, which favored the magnetization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Manufacturing, Structure, Properties of MgB{sub 2}-Based Materials

The composition of MgB{sub 2}-based materials (wires, bulks, and thin films) with high critical current densities, j{sub c}, prepared at different pressure (0.1 MPa–2 GPa)—temperature (600–1050 °C) conditions was analyzed by the X-ray and JAMP−9500F Auger spectrometer (after removing the oxidized layers at the sample surfaces by Ar ion etching performed directly in the vacuum chamber of a microscope). Similar regularly distributed inhomogeneities connected with Mg, B, and admixture O content variation on the nanolevel were observed in all types of the MgB{sub 2}-based materials. The correlations between the character of the material inhomogeneities and the attained superconducting characteristics are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Process-Structure-Property Relations for As-Deposited Solid-State Additively Manufactured High-Strength Aluminum Alloy

Solid-state additive manufacturing methods provide innovative solutions to circumvent problems associated with materials susceptible to hot cracking by avoiding liquid solid phase transformations. In this work, the process parameter influence on microstructural evolution and mechanical response of a fully dense aluminum alloy 7050 (AA7050) component manufactured via a rapid, solid-state additive manufacturing process known as Additive Friction Stir Deposition (AFS-D) was quantified for the first time. Three sections (starting dwell, transient, crossover of roads) of the deposition that exhibit differing thermomechanical processing histories were evaluated for the resulting microstructure and mechanical response. The microstructural characterization was performed on the as-deposited AA7050 via Electron Backscatter Diffraction (EBSD), TEM, optical microscopy, and Scanning Electron Microscopy (SEM). The microstructural characterization revealed refined constituent particles and grains throughout the as-deposited AA7050 microstructure. Furthermore, quasi-static tensile experiments were conducted in both the build and transverse directions, in order to quantify the orientation influence on tensile properties of the as-deposited AA7050 build. Spatially dependent tensile properties were observed in the material due to heat input variation coarsening of secondary phases towards the initial layers of the AFS-D build. Post-mortem analysis revealed that voids nucleated and coalesced from the overgrowth of the strengthening precipitates present in the material, resulting in fracture.

36 MATERIALS SCIENCE↗

Structural properties of optically clear bacterial cellulose produced by Komagataeibacter hansenii using arabitol

Here, bacterial cellulose (BC) exhibits beneficial properties for use in biomedical applications but is limited by its lack of tunable transparency capabilities. To overcome this deficiency, a novel method to synthesize transparent BC materials using an alternative carbon source, namely arabitol, was developed. Characterization of the BC pellicles was performed for yield, transparency, surface morphology, and molecular assembly. Transparent BC was produced using mixtures of glucose and arabitol. Zero percent arabitol pellicles exhibited 25% light transmittance, which increased with increasing arabitol concentration through to 75% light transmittance. While transparency increased, overall BC yield was maintained indicating that the altered transparency may be induced on a micro-scale rather than a macro-scale. Significant differences in fiber diameter and the presence of aromatic signatures were observed. Overall, this research outlines methods for producing BC with tunable optical transparency, while also bringing new insight to insoluble components of exopolymers produced by Komagataeibacter hansenii.

59 BASIC BIOLOGICAL SCIENCES↗