Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structure Generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Advanced Electrode Structures for Proton Exchange Membrane Fuel Cells: Current Status and Path Forward

Abstract Proton exchange membrane fuel cells (PEMFCs) have demonstrated their viability as a promising candidate for clean energy applications. However, performance of conventional PEMFC electrodes, especially the cathode electrode, suffers from low catalyst utilization and sluggish mass transport due to the randomly distributed components and tortuous transport pathways. Development of alternative architectures in which the electrode structure is controlled across a range of length scales provides a promising path toward overcoming these limitations. Here, we provide a comprehensive review of recent research and development of advanced electrode structures, organized by decreasing length-scale from the millimeter-scale to the nanometer-scale. Specifically, advanced electrode structures are categorized into five unique architectures for specific functions: (1) macro-patterned electrodes for enhanced macro-scale mass transport, (2) micro-patterned electrodes for enhanced micro-scale mass transport, (3) electrospun electrodes with fiber-based morphology for enhanced in-plane proton transport and through-plane O 2 transport, (4) enhanced-porosity electrodes for improved oxygen transport through selective inclusion of void space, and (5) catalyst film electrodes for elimination of carbon corrosion and ionomer poisoning. The PEMFC performance results achieved from each alternative electrode structure are presented and tabulated for comparison with conventional electrode architectures. Moreover, analysis of mechanisms by which new electrode structures can improve performance is presented and discussed. Finally, an overview of current limitations and future research needs is presented to guide the development of electrode structures for next generation PEMFCs. Graphical Abstract Development of improved electrode architectures with the control of structure on length scales ranging from millimeters to nanometers could enable a new generation of fuel cells with increased performance and reduced cost. This paper presents an in-depth review and critical analysis of recent developments and future outlook on the design of advanced electrode structures.

25 ENERGY STORAGE↗
NASA NTRS2019

Microphone Phased Array NetCDF/HDF5 Archival Files: Application Program Interface Reference

An application program interface (API) has been developed for the creation and access of structured data files generated by microphone phased arrays utilized in aeroacoustics research. Two structured binary file formats are supported, namely NetCDF (Network Common Data Form) and HDF5 (Hierarchical Data Format) files. The API consists of a library of routines callable from C, Fortran or Matlab, with native versions of the API provided for each language. The libraries are divided into categories for file handling, file definition and initialization, data writing, data recovery, and error handling. The API is intended to provide a mechanism for generating self-describing binary files for long-term archiving of raw and processed data generated by phased array systems.

Humphreys, William M., Jr.↗
NASA NTRS1993

Numerical simulation of shock/turbulent boundary layer interaction

Most flows of aerodynamic interest are compressible and turbulent. However, our present knowledge on the structures and mechanisms of turbulence is mostly based on incompressible flows. In the present work, compressibility effects in turbulent, high-speed, boundary layer flows are systematically investigated using the Direct Numerical Simulation (DNS) approach. Three-dimensional, time-dependent, fully nonlinear, compressible Navier-Stokes equations were numerically integrated by high-order finite-difference methods; no modeling for turbulence is used during the solution because the available resolution is sufficient to capture the relevant scales. The boundary layer problem deals with fully-turbulent compressible flows over flat geometries. Apart from its practical relevance to technological flows, turbulent compressible boundary layer flow is the simplest experimentally realizable turbulent compressible flow. Still, measuring difficulties prohibit a detailed experimental description of the flow, especially in the near-wall region. DNS studies provide a viable means to probe the physics of compressible turbulence in this region. The focus of this work is to explore the paths of energy transfer through which compressible turbulence is sustained. The structural similarities and differences between the incompressible and compressible turbulence are also investigated. The energy flow patterns or energy cascades are found to be directly related to the evolution of vortical structures which are generated in the near-wall region. Near-wall structures, and mechanisms which are not readily accessible through physical experiments are analyzed and their critical role on the evolution and the behavior of the flow is documented extensively.

Biringen, Sedat↗
DOE OSTI2024

Transmission-mounted combined energy recovery drive

An energy recovery drive system includes a motor-generator that is structured to selectively operate in a motor mode and a generator mode. A first shaft is operatively coupled to a transmission power take-off shaft. A second shaft is operatively coupled to the motor-generator and to an alternative power source. The energy recovery drive system is controllably operated in a plurality of operating modes. In a first operating mode, the motor-generator is in torque providing engagement with each of the first and second shafts. In a second operating mode, the motor-generator is in torque communicating engagement with each of the first and second shafts. In a third operating mode, which the motor-generator is in torque communicating engagement with the second shaft and is disengaged from transferring torque to the first shaft and from receiving torque from the first shaft.

Correa, Dixon Malcolm↗
DOE OSTI2025

Cavity-Assisted Coherent Phonon Generation and Control in a WSe 2 /Au Structure

Coherent phonons in the Terahertz (THz) regime have gained attention as potential candidates for next-generation high-speed, low-energy information carriers in atomically thin phononic or phonon-integrated on-chip devices. Nevertheless, achieving efficient control over THz coherent phonons continues to pose a considerable challenge. In this work, we explore THz coherent phonon generation in exfoliated van der Waals (vdW) flakes of WSe 2 on Au (WSe 2 /Au) and Si (WSe 2 /Si) using time-resolved pump-probe spectroscopy. The generation of THz coherent phonons was studied as a function of WSe 2 layer thickness and laser wavelength. Notably, a significant enhancement in THz coherent phonon generation was observed in the WSe 2 /Au structure, but only within specific ranges of WSe 2 thickness and laser wavelength. Further, the results from numerical simulations, which consider a self-hybridized optical cavity depending on WSe 2 thickness, along with optical reflectance and Raman spectroscopy measurements, aligned well with the time-domain observations of THz coherent phonon generation. We propose that the observed enhancement in THz coherent phonon generation is strongly influenced by light-matter interaction in the WSe 2 cavity, a mechanism that may be applicable to a broader range of vdW materials. These findings offer promising insights for the development of THz phononic or phonon-integrated devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1994

Measurements and modeling of flow structure in the wake of a low profile wishbone vortex generator

The results of an experimental examination of the vortex structures shed from a low profile 'wishbone' generator are presented. The vortex generator height relative to the turbulent boundary layer was varied by testing two differently sized models. Measurements of the mean three-dimensional velocity field were conducted in cross-stream planes downstream of the vortex generators. In all cases, a counter-rotating vortex pair was observed. Individual vortices were characterized by three descriptors derived from the velocity data; circulation, peak vorticity, and cross-stream location of peak vorticity. Measurements in the cross plane at two axial locations behind the smaller wishbone characterize the downstream development of the vortex pairs. A single region of stream wise velocity deficit is shared by both vortex cores. This is in contrast to conventional generators, where each core coincides with a region of velocity deficit. The measured cross-stream velocities for each case are compared to an Oseen model with matching descriptors. The best comparison occurs with the data from the larger wishbone.

Wendt, B. J.↗
DOE OSTI2025

Design of facilitated dissociation enables timing of cytokine signalling

Protein design has focused on the design of ground states, ensuring that they are sufficiently low energy to be highly populated. Designing the kinetics and dynamics of a system requires, in addition, the design of excited states that are traversed in transitions from one low-lying state to another. This is a challenging task because such states must be sufficiently strained to be poorly populated, but not so strained that they are not populated at all, and because protein design methods have focused on generating near-ideal structures. Here we describe a general approach for designing systems that use an induced-fit power stroke to generate a structurally frustrated and strained excited state, allosterically driving protein complex dissociation. X-ray crystallography, double electron–electron resonance spectroscopy and kinetic binding measurements show that incorporating excited states enables the design of effector-induced increases in dissociation rates as high as 5,700-fold. We highlight the power of this approach by designing rapid biosensors, kinetically controlled circuits and cytokine mimics that can be dissociated from their receptors within seconds, enabling dissection of the temporal dynamics of interleukin-2 signalling.

deformation dynamics↗
NASA NTRS2006

Forces Generated by High Velocity Impact of Ice on a Rigid Structure

Tests were conducted to measure the impact forces generated by cylindrical ice projectiles striking a relatively rigid target. Two types of ice projectiles were used, solid clear ice and lower density fabricated ice. Three forms of solid clear ice were tested: single crystal, poly-crystal, and "rejected" poly-crystal (poly-crystal ice in which defects were detected during inspection.) The solid ice had a density of approximately 56 lb/cu ft (0.9 gm/cu cm). A second set of test specimens, termed "low density ice" was manufactured by molding shaved ice into a cylindrical die to produce ice with a density of approximately 40 lb/cu ft (0.65 gm/cu cm). Both the static mechanical characteristics and the crystalline structure of the ice were found to have little effect on the observed transient response. The impact forces generated by low density ice projectiles, which had very low mechanical strength, were comparable to those of full density solid ice. This supports the hypothesis that at a velocity significantly greater than that required to produce fracture in the ice, the mechanical properties become relatively insignificant, and the impact forces are governed by the shape and mass of the projectile.

Pereira, J. Michael↗
DOE OSTI2024

Deactivation of Cu/ZSM-5 Catalysts during the Conversion of 2,3-Butanediol to Butenes

This work determines the deactivation mechanisms of Cu/ZSM-5 catalysts used for the conversion of 2,3-butanediol to butene as part of an alcohol-to-jet route. The deactivation of the catalyst, reflected by a drop in the rate of the limiting hydrogenation step by over 90% in 24 h at a weight hourly space velocity of 5.92 h−1, proceeds via both the agglomeration of copper particles and the obstruction of copper surfaces due to carbonaceous deposits, although the former has less impact on the decrease in the hydrogenation rate. To reduce the detrimental effect of carbonaceous deposits on catalytic activity, ZMS-5 is modified through desilication of the HZSM-5 support with NaOH and CsOH solutions to generate a hierarchical structure with mesopores. The catalyst with the CsOH-treated support generates the highest overall yield of desired olefin products and experiences the slowest deactivation. This is a result of the lower Brønsted acidity and larger mesopores found in the CsOH-treated catalyst, leading to the slower formation of carbonaceous deposits and the faster diffusion of their precursors out of the pores.

Chemistry↗
NASA NTRS2011

TPSAS-NF1676L-12587-DND

Increased use of integral structures and sensory materials in new aerospace vehicles provides potential to reduce assembly time, reduce damage initiation features, and enhance identification of damage as compared to current built up structures. In this work the nondestructive evaluation requirements of these next generation materials and structures is examined. In particular, electromagnetic methods are explored for the characterization of residual stresses in integral structures and for the characterization embedded sensory alloy particles in an aluminum alloy matrix.

Russell A Wincheski↗
NASA NTRSDate not supplied

An Initial Vibro-Acoustic Model for Predicting Electric Motor Noise

A system-level tool to predict electric motor noise, suitable for trade studies of eVTOL and UAM aircraft, does not exist. This work describes the ongoing effort to develop such a tool. It utilizes a 3 phase prediction routine that models the electro-magnetic interactions of the electric motor, the resulting structural vibrations of the motor rotor, and finally the acoustic propagation generated by those structural vibrations.

Electric Motor Noise↗
NASA NTRS1988

Reliability Model Generator for fault-tolerant systems

This paper discusses an analysis tool, the Reliability Model Generator, that reasons from structural and functional system design specifications to generate a reliability model for the system under investigation. The resultant model defines a system state space sufficient to characterize the effects of single and multiple component failures. This model may then be examined by the analyst or used as input to an existing reliability evaluation tool, the Semi-Markov Unreliability Range Evaluator (SURE), to compute numeric bounds for system reliability (i.e., safety, mission success, availability, etc.). In defining the input to the Reliability Model Generator, a separation of the component function from structural specification is proposed to allow easy modification for analysis of alternative architectures. A hierarchical system description paradigm promotes multiple abstractions, thereby enabling analysis at all phases of the design process. The work described in this paper has been supported under NASA contract NAS1-10899, Integrated Airframe/Propulsion Control System Architecture (IAPSA II). IAPSA II promotes a system engineering methodology and supporting analytical tools to evaluate flight control architecture configuration alternatives during early phases of the design cycle when the cost and schedule impact of design revisions is minimal. Emphasis is placed on traceability to ensure that the requirements drive the resulting design.

Catherine M McCann↗
NASA NTRS2006

Generating a 2D Representation of a Complex Data Structure

A computer program, designed to assist in the development and debugging of other software, generates a two-dimensional (2D) representation of a possibly complex n-dimensional (where n is an integer >2) data structure or abstract rank-n object in that other software. The nature of the 2D representation is such that it can be displayed on a non-graphical output device and distributed by non-graphical means.

James, Mark↗
DOE OSTI2020

Deep learning to generate in silico chemical property libraries and candidate molecules for small molecule identification in complex samples

Comprehensive and unambiguous identification of small molecules in complex samples will revolutionize our understanding of the role of metabolites in biological systems. Existing and emerging technologies have enabled measurement of chemical properties of molecules in complex mixtures and, in concert, are sensitive enough to resolve even stereoisomers. Despite these experimental advances, small molecule identification is inhibited by (i) chemical reference libraries (e.g. mass spectra, collision cross section, and other measurable property libraries) representing <1% of known molecules, limiting the number of possible identifications, and (ii) the lack of a method to generate candidate matches directly from experimental features (i.e. without a library). To this end, we developed a variational autoencoder (VAE) to learn a continuous numerical, or latent, representation of molecular structure to expand reference libraries for small molecule identification. We extended the VAE to include a chemical property decoder, trained as a multitask network, in order to shape the latent representation such that it assembles according to desired chemical properties. The approach is unique in its application to metabolomics and small molecule identification, with its focus on properties that can be obtained from experimental measurements (m/z, CCS) paired with its training paradigm, which involved a cascade of transfer learning iterations. First, molecular representation is learned from a large dataset of structures with m/z labels. Next, in silico property values are used to continue training, as experimental property data is limited. Finally, the network is further refined by being trained with the experimental data. This allows the network to learn as much as possible at each stage, enabling success with progressively smaller datasets without overfitting. Once trained, the network can be used to predict chemical properties directly from structure, as well as generate candidate structures with desired chemical properties. Our approach is orders of magnitude faster than first-principles simulation for CCS property prediction. Additionally, the ability to generate novel molecules along manifolds, defined by chemical property analogues, positions DarkChem as highly useful in a number of application areas, including metabolomics and small molecule identification, drug discovery and design, chemical forensics, and beyond.

Colby, Sean M.↗
DOE OSTI2025

Towards next-generation optical potentials for nuclear reactions and structure calculations

Optical-model potentials (OMPs) are critical ingredients for basic and applied nuclear physics. Present-day computational capabilities allow us to generate data-driven nucleon-nucleus OMPs that are non-local and exactly dispersive (as theoretically required to be), include statistically-sound uncertainty quantification, and are trained on both scattering and bound-state data from a wide area of the nuclear chart. Combined together, these features allow for significant improvement in fidelity and extrapolative power of the model. Here, we present preliminary work toward the development and training of such an OMP. The capability of the model to describe data at this first stage is encouraging.

Perrotta, Salvatore Simone [Lawrence Livermore Nat↗