Search NASA⌕ Search

SEARCH · Search NASA

Results for “Tectonics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Topography and tectonics of mid-oceanic ridge axes

Numerical fluid dynamic models of mid-oceanic ridge axes were constructed using distributions of material properties constrained by seismic studies and thermal calculations. The calculations indicate that spreading is passive except for forces caused by density differences due to thermal expansion and partial melt. Except for geometric differences due to temperature distribution, one set of mechanical properties can adequately explain central rifts of slow ridges and central peaks of fast ridges. Viscous head loss in the upwelling material dominates at low spreading rates where material ascends through a narrow conduit. Thermal expansion and partial melting dominate at high spreading rates where a wide low viscosity crustal magma chamber is present. The preferred rheology is 10 to the 20th poise for the upwelling lithosphere; less than 5 x 10 to the 17th for the crustal magma chamber and axial intrusion zone at fast ridges, and a yield stress of 200 bars for the lithosphere. The calculation correctly predicts the existence of central peaks at 'hot-spot' ridges, where seismic evidence indicates a large magma chamber.

Sleep, N. H.↗

Radar, an optimum remote-sensing tool for detailed plate tectonic analysis and its application to hydrocarbon exploration (an example in Irian Jaya Indonesia)

Geometric, geomorphic, and structural information derived from the examination of radar imagery and combined with geologic and geophysical evidences strongly indicates that Salawati Island was attached to the Irian Jaya mainland during the time of Miocene lower Pliocene reef development, and that it was separated in middle Pliocene to Pleistocene time, opening the Sele Strait rift zone. The island moved 17.5 km southwestward after an initial counterclockwise rotation of 13 deg. The rift zone is subsequent to the creation of the large left lateral Sorong fault zone that is part of the transitional area separating the westward-moving Pacific plate from the relatively stable Australian plate. The motion was triggered during a widespread magmatic intrusion of the Sorong fault zone, when the basalt infiltrated a right lateral fault system in the area of the present Sele Strait.

Froidevaux, C. M.↗

Evaluation of existing knowledge of the tectonic history and lithospheric structure of South America

While data is available on the lithospheric and crustal structure of the Andes region of South America, there is limited knowledge of these aspects of the eastern portion of the continent. For this reason, a surface wave dispersion study of the area was initiated. Long period seismograms were obtained for a tripartite analysis of dispersion. A flow chart of the analysis to be conducted is presented along with a preliminary geologic/tectonic map that was prepared. Efforts to characterize the provinces identified in terms of their geological and geophysical parameters continue.

Keller, G. R.↗

The tectonics of anorthosite massifs

Anorthosite massifs developed approximately 1.4 to 1.5 billion years ago along an arch which developed parallel to a zone of continental separation as a block which included North America, Europe, and probably Asia separated from a block which included parts of South America, Africa, India, and Australia. Anorthosite massifs also developed at the same time along a belt which runs through the continents which comprise Gondwanaland (South America), Africa, India, Australia, and Antarctica. This was a zone of continental separation which subsequently became a zone of continental collision about 1.2 billion years ago. The northern anorthosite belt also parallels an orogenic belt which was active between 1.8 and 1.7 billion years ago. Heat generated during this mountain building period helped in the formation of the anorthosites.

Seyfert, C. K.↗

Bathymetric and tectonics of Indian Ocean using MAGSAT data

The quality of the MAGSAT data was assessed, especially the characterization of spikes. The spectral passbands of significance to geophysical analysis were analyzed, including computations of spectral coherence between nearby repeating satellite tracks. A spectrum modeling effort was begun which is designed to show the effect of spacecraft attitude on the observability of magnetic anomalies. The data obtained is to be used to compute crustal anomaly maps by modeling the equivalent dipoles in the project area.

Sailor, R. V.↗

Investigating tectonic and bathymetric features of the Indian Ocean using MAGSAT magnetic anomaly data

MAGSAT Investigator-B tapes were preprocessed by (1) removing all data points with obvious erroneous values and location errors; (2) removing smaller spikes (typically 15 nT or more), and deleting data tracks with fewer than 20 points; and (3) removing a linear trend from each track. The remaining data were recorded on tape for use by the equivalent source mapping (ESMAP) program which uses a least squares algorithm to fit the magnetization parameter of the grid of equivalent source dipoles in the crust to satellite data acquired at different times and locations. ESMAP was implemented on the TASC computing system and modified to read preprocessed MAGSAT tapes and interface with TASC plotting software. Some verification of the software was accomplished. Gridded 1-degree mean values of gravity anomaly and sea surface undulation computed from SEASAT radar altimeter were obtained and brought on line.

Lazarewicz, A. R.↗

Late Cenozoic alkaline volcanism in the northwestern Caribbean - Tectonic setting and Sr isotopic characteristics

The northwestern corner of the Caribbean plate has at least sixteen centers of alkalic volcanism, most of which is Quaternary in age. Sr-87/Sr-86 ratios of the rocks in these centers are used to distinguish three geographical groups: a low-ratio group (0.7026-0.7031) at the Nicaraguan Rise, an intermediate-ratio group (0.7036-0.7038) in northeastern Costa Rica, and a high-ratio group (0.7047-0.7063) in Hispaniola. It is suggested that the increased radiogenic strontium in both Costa Rica and Hispaniola may have come from volatile-rich fluids escaping from adjacent subducting slabs of oceanic crust. The isotopic differences between the two areas is explained by the relative longevity and high rate of subduction in Costa Rica compared to that in Hispaniola. The Costa Rican alkaline rocks cover a segment of the Cocos plate which is being subducted at a smaller angle (about 35 deg) than at the rest of the Central American arc.

Wadge, G.↗

Schiaparelli Basin, Mars - Morphology, Tectonics and infilling history

Schiaparelli Basin (an elliptical basin 460 x 400 km in diameter) is the best preserved large impact structure on Mars. Multiple periods of basin infilling by lava and eolian material can be recognized. Numerous ridges within the basin show a strong northwest-southeast orientation, consistent with a regional stress field induced by the loading of the lithosphere by Tharsis. Ridge location is, however, apparently dominated by a buried peak ring. Earth-based radar measurements of Schiaparelli indicate that the ejecta deposits are best preserved on topographic highs southeast of the basin, while eolian materials have preferentially accumulated in the lower (western) side of the basin. Lyot (215 km diameter) is believed to be a good analogue to the pre-infilled Schiaparelli, and indicates that Schiaparelli probably had an initially hummocky floor topography and both ballistic and ground-flow ejecta deposits.

Mouginis-Mark, P. J.↗

Seismicity and active tectonics of the Andes and the origin of the Altiplano

Large earthquakes and active deformation on the Andes were studied. Earthquakes on the east side of the Andes were generally found to reflect east-west crustal shortening. These earthquakes seem to occur throughout the crust and do not reflect a detachment and low angle thrusting of the sedimentary cover onto the Brazilian shield. Instead they imply deformation of the basement. The rate of shortening is compatible with construction of the Andes by crustal shortening since the late Cretaceous, and the surface geology, at least qualitatively, is considered to reflect this process. Andean margins are considered to be a result of crustal shortening. The crustal shortening in the sub-Andes occurs concurrently with normal faulting at high elevations in parts of the Andes. The normal faulting is associated with the buoyancy of the thick crust. Crustal shortening thickens the crust and work is done against gravity. When the crustal thickness and elevation reach limiting values, the range grows laterally by further thrusting on the margins.

Molnar, P.↗

Investigating tectonic and bathymetric features of the Indian Ocean using MAGSAT magnetic anomaly data

An equivalent source anomaly map and a map of the relative magnetization for the investigation region were produced. Gravimetry, bathymetry, and MAGSAT anomaly maps were contoured in pseudocolor displays. Finally, an autoregressive spectrum estimation technique was verified with synthetic data and shown to be capable of resolving exponential power spectra using small samples of data. Interpretations were made regarding the relationship between MAGSAT data spectra and crustal anomaly spectra.

Sailor, R. V.↗

Mechanisms for lithospheric heat transport on Venus Implications for tectonic style and volcanism

The mechanisms of plate recycling, lithospheric conduction, and hot spot volcanism are each evaluated to determine which is the dominant mode of lithospheric heat transfer on Venus, with attention given to the implications of each mechanism for the interpretation of Venus surface features. It is thought that plate recycling on Venus cannot be excluded on the basis of either theoretical arguments or present observations on topography and radar backscatter. Landforms caused by plate convergence and divergence on Venus, it is noted, would differ substantially from those on the earth owing to the high surface temperature and the absence of oceans on Venus, the lack of free or hydrated water in subducted material, the possibility that subduction would more commonly be accompanied by lithospheric delamination, and the rapid spreading rates that would be required if plate recycling removed a significant fraction of the internal heat. The possibility that the dominant mechanism early in the history of the planet was different from the one at work now is thought to merit consideration.

Solomon, S. C.↗

Thick shell tectonics on one-plate planets - Applications to Mars

Using the zero frequency equations of a self-gravitating elastic spherical shell overlying a strengthless fluid, a theory for stress distribution in thick lithospheric shells on one-plate planets is developed. For both the compensated and flexural modes, stress distributions in lithospheres are reviewed. For compensated modes, surface stresses depend only on surface topography, whereas for flexural modes it is shown that, for long wavelengths, stress trajectories are mainly dependent on the lithospheric lateral density distribution and not on elastic properties. Computational analyses are performed for Mars, and it is found that isostatically compensated models correctly predict the graben structure in the immediate Tharsis region and a flexural loading model is satisfactory in explaining the graben in the regions surrounding Tharsis. A three-stage model for the evolution of Tharsis is hypothesized: isostasy with north-south graben formation on Tharsis, followed by flexural loading and radial graben formation on the perimeter of Tharsis, followed by a last stage of loading with little or no regional deformation.

Banerdt, W. B.↗

The evolution of tectonic features on Ganymede

The bands of bright resurfaced terrain on Ganymede are probably broad grabens formed by global expansion and filled with deposits of ice. Grooves within the bands are thought to be extensional features formed during the same episode of expansion. The crust of Ganymede is modeled as a viscoelastic material subjected to extensional strain. With sufficiently high strain rates and stresses, deep normal faulting will occur, creating broad grabens that may then be filled. Continuing deformation at high strain rates and stresses will cause propagation of deep faults up into the flood deposits and normal faulting at the surface, while lower strain rates and stresses will cause formation of open extension fractures or, if the crustal strength is very low, grabens at the surface. The spacing between adjacent fractures may reflect the geothermal gradient at the time of deformation. Surface topography resulting from fracturing and normal faulting will decay with time as a result of viscous relaxation and mass-wasting.

Squyres, S. W.↗