Search NASA⌕ Search

SEARCH · Search NASA

Results for “Test and analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Adaptive flutter suppression, analysis and test

Methods of adaptive control have been applied to suppress a potentially violent flutter condition of a half-span model of a lightweight figher aircraft. This marked the confluence of several technologies with active flutter suppression, digital control and adaptive control theory the primary contributors. The control algorithm was required to adapt both to slowly varying changes, corresponding to changes in the flight condition or fuel loading and to rapid changes, corresponding to a store release or the transition from a stable to an unstable flight condition. The development of the adaptive control methods was followed by a simulation and checkout of the complete system and a wind tunnel demonstration. As part of the test, a store was released from the model wing tip, transforming the model abruptly from a stable configuration to a violent flutter condition. The adaptive algorithm recognized the unstable nature of the resulting configuration and implemented a stabilizing control law in a fraction of a second. The algorithm was also shown to provide system stability over a range of wind tunnel Mach numbers and dynamic pressures.

Johnson, E. H.↗
NASA NTRS1983

Analysis and test for space shuttle propellant dynamics

This report presents the results of a study to develop an analytical model capable of predicting the dynamic interaction forces on the Shuttle External Tank, due to large amplitude propellant slosh during RTLS separation. The report details low-g drop tower and KC-135 test programs that were conducted to investigate propellant reorientation during RTLS. In addition, the development of a nonlinear finite element slosh model (LAMPS2, two dimensional, and one LAMPS3, three dimensional) is presented. Correlation between the model and test data is presented as a verification of the modeling approach.

Berry, R. L.↗
NASA NTRS1983

Design, analysis and test of composite curved frames for helicopter fuselage structure

Curved beam effects in composite frame structures representative of a light helicopter airframe are examined, and currently available analytical methods for studying these effects are briefly reviewed. A finite element study of curved composite frames is then reported, and it is shown that the curved frame effects must be accurately accounted for to avoid premature fracture. The finite element method is shown to be accurate to within 10 percent in accounting for the curved beam effects in composite structures.

Rich, M. J.↗
NASA NTRS1983

The analysis and testing of blade platform friction dampers used in the high pressure fuel turbopump (HPFTP) of the Space Shuttle Main Engine (SSME)

Premature cracking of the first stage turbine blades in HPFTP of the SSME could be alleviated by redesign of the platform friction dampers that are used to reduce the vibration response of the blades. Analytical studies by the lumped mass method of friction damper effectiveness and spin pit tests of a straingaged bladed disk have been performed. Methodologies used in the program are described. Preliminary results show that the effectiveness of the blade platform dampers can be increased if the frequency and amplitude of the most damaging forcing functions can be defined.

Dominic, R. J.↗
NASA NTRS1983

Design, analysis and test verification of advanced encapsulation systems

The analytical methodology for advanced encapsulation designs for the development of photovoltaic modules is presented. Analytical models are developed to test optical, thermal, electrical and structural properties of the various encapsulation systems. Model data is compared to relevant test data to improve model accuracy and develop general principles for the design of photovoltaic modules.

Garcia, A., III↗
NASA NTRS1984

Design, analysis and test verification of advanced encapsulation systems

Investigations into transparent conductive polymers were begun. Polypyrrole was electrochemically deposited, but the film characteristics were poor. A proprietary polymer material supplied by Polaroid was evaluated and showed promise as a readily processable material. A method was developed for calculating the magnitude and location of the maximum electric field for the family of solar-cell-like shapes. A method for calculating the lines of force for three dimensional electric fields was developed and applied to a geometry of interest to the photovoltaic program.

Garcia, A., III↗
NASA NTRS1984

Analysis and testing for rotordynamic coefficients of turbulent annular seals with different, directionally homogeneous surface-roughness treatment for rotor and stator elements

A theory is presented, based on a simple modification of Hirs' turbulent lubrication equations, to account for different but directionally-homogeneous surface roughness treatments for the rotor and stator of annular seals. The theoretical results agree with von Pragenau's predictions that a damper seal which uses a smooth rotor and a rough stator yields more net damping than a conventional seal which has the same roughness for both the rotor and stator. Experimental results for four stators confirm that properly-designed roughened stators yield higher net damping values and substantially less leakage than seals with smooth surfaces. The best seal from both damping and leakage viewpoints uses a round-hole-pattern stator. Initial results for this stator suggest that, within limits, seals can be designed to yield specified ratios of stiffness to damping.

Childs, D. W.↗
NASA NTRS1984

Convergent-tapered annular seals - Analysis and testing for rotordynamic coefficients

A combined analytical-computational method has been developed to calculate the pressure field and dynamic coefficients for tapered high-pressure annular seals. Completely developed turbulent flow is assumed in both the circumferential and axial directions, according to Hirs' (1973) bulk-flow turbulent-lubrication equations. In a numerical experiment with the method, a short bearing approximation is used to derive an analytical expression for the first-order (dynamic) pressure gradient. This expression is integrated numerically to define dynamic coefficients of the seal. Numerical results of the integration are compared with previous results for straight and tapered seals. It is found that direct stiffness and leakage coefficients increase in the present seal, while the remaining coefficients decrease. An optimal taper angle is shown to exist with respect to: (1) the direct stiffness and (2) the ratio of direct stiffness to leakage. On the basis of the optimal taper angle calculations, stiffness increases on the order of 40 to 50 percent are predicted. Experimental results for three taper angles are presented, and are found to be in good agreement with the theoretical predictions.

Childs, D. W.↗
NASA NTRS1985

Analysis and test evaluation of the dynamic response and stability of three advanced turboprop models at low forward speed

Results of wind tunnel tests at low forward speed for blade dynamic response and stability of three 62.2 cm (24.5 in) diameter models of the Prop-Fan, advanced turboprop, are presented. Measurements of dynamic response were made with the rotors mounted on an isolated nacelle, with varying tilt for nonuniform inflow. Low speed stall flutter tests were conducted at Mach numbers from 0.0 to 0.35. Measurements are compared to Eigen-solution flutter boundaries. Calculated 1P stress response agrees favorably with experiment. Predicted stall flutter boundaries correlate well with measured high stress regions. Stall flutter is significantly reduced by increased blade sweep. Susceptibility to stall flutter decreases rapidly with forward speed.

Smith, Arthur F.↗
NASA NTRS1986

Space Telescope Antenna Pointing System analysis and test

The Space Telescope (ST), carrying five astronomy instruments, is a long-life spacecraft designed to achieve and maintain ultrafine stabilization jitter performance. The rms jitter specification for pointing performance is 7 marcsec (1sigma) during periods of scientific observation. Spacecraft attitude control is achieved by onboard computer processing of attitude and rate sensor data to generate reaction-wheel torque commands. The ST Antenna Pointing System is used to position a high-gain antenna for relaying science and engineering data from the spacecraft to the ground station.

Dodder, R.↗
NASA NTRS1987

Thermal design, analysis and testing of the Halogen Occultation Experiment

This paper briefly introduces the Halogen Occultation Experiment (HALOE) and describes the thermal requirements in some detail. The thermal design of the HALOE is described, together with the design process and the analytical techniques used to arrive at this design. The flight hardware has undergone environmental testing in a thermal vacuum chamber to validate the thermal design. The HALOE is a unique problem in thermal control due to its variable solar loading, its extremely sensitive optical components and the high degree of pointing accuracy required. This paper describes the flight hardware, the design process and its verification.

Foss, Richard A.↗
NASA NTRS1988

Evaluate the application of modal test and analysis processes to structural fault detection in MSFC-STS project elements

The Space Transportation System (STS) is a very complex and expensive flight system which is intended to carry payloads into low Earth orbit and return. A catastrophic failure of the STS (such as experienced in the 51-L incident) results in the loss of both human life as well as very expensive hardware. One impact of this incident was to reaffirm the need to do everything possible to insure the integrity and reliability of the STS is sufficient to produce a safe flight. One means of achieving this goal is to expand the number of inspection technologies available for use on the STS. The purpose was to begin to evaluate the possible use of assessing the structural integrity of STS components for which Marshall Space Flight Center (MSFC) has responsibility. This entailed reviewing the available literature and determining a low-level experimental program which could be performed by MSFC and would help establish the feasibility of using this technology for structural fault detection.

Springer, William T.↗
NASA NTRS1989

Design, analysis, and testing of a hybrid scale structural dynamic model of a Space Station

The impracticality of testing the fully-assembled on-orbit configurations of future large erectable space platforms fosters an increased reliance on other means for verifying predicted structural dynamic performance. One option is scale modeling. This paper discusses the design of a hybrid scale dynamic test model of the Freedom Space Station and its associated suspension system. Hybrid scaling laws are reviewed, followed by scale factor trades, component design examples, and an analytical evaluation of the overall model fidelity. Component and subassembly test results from a six-bay hybrid scale model truss are presented. Potential interactions of gravity and the suspension system with the free-free dynamics of the scale model are investigated. Suspension system design parameters, such as the number, location, mass, and stiffness of the suspension devices are traded to minimize undesirable interactions and form the basis for an overall suspension system concept for the scale model.

Gronet, Marc J.↗
NASA NTRS1989

Analysis and test of insulated components for rotary engine

The direct-injection stratified-charge (DISC) rotary engine, while attractive for aviation applications due to its light weight, multifuel capability, and potentially low fuel consumption, has until now required a bulky and heavy liquid-cooling system. NASA-Lewis has undertaken the development of a cooling system-obviating, thermodynamically superior adiabatic rotary engine employing state-of-the-art thermal barrier coatings to thermally insulate engine components. The thermal barrier coating material for the cast aluminum, stainless steel, and ductile cast iron components was plasma-sprayed zirconia. DISC engine tests indicate effective thermal barrier-based heat loss reduction, but call for superior coefficient-of-thermal-expansion matching of materials and better tribological properties in the coatings used.

Badgley, Patrick R.↗