Search NASA⌕ Search

SEARCH · Search NASA

Results for “Trigger”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Commissioning Trigger for the SpinQuest/E1039 Experiment

The SpinQuest experiment at Fermilab aims to measure the Sivers asymmetry for the light antiquarks in the nucleon using the Drell-Yan process. If the Sivers asymmetry is not zero, we will have found evidence for non-zero orbital angular momentum of light antiquarks. The commissioning of the SpinQuest experiment has two phases. First, we will trigger on cosmic ray muons to understand the performance of the SpinQuest detector which comprises hodoscopes, wire chambers, and proportional tubes. Second, we will use the 120 GeV Main Injector proton beam to test all the detectors more thoroughly and analyze the data to get prepared for physics running. This poster will present the structure of the commissioning trigger, the timing calibration, and the measured performance of the hodoscopes using cosmic rays.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Photonic-crystal-fiber-delivered laser-triggered high-voltage gas switch

A photonic-crystal-fiber-delivered laser-triggered high-voltage gas switch can deliver a peak irradiance of greater than 5.1×1011 W/cm2 to the AK gap for a laser having a wavelength of 1064 nm. The switch is capable of operating at pressures up to 2200 psi; voltages across the gap of greater than 200 kV; operation at less than 70% self-break voltage; shot-to-shot jitter of less than 3 ns; AK gap distances of 3 mm or smaller; and triggering via a fiber-delivered laser pulse energy of as low as 500 μJ.

42 ENGINEERING↗

Studies on the scintillation light detection in the ProtoDUNE Dual Phase liquid-argon TPC and its capability for the supernova trigger in DUNE

The Deep Underground Neutrino Experiment (DUNE) is a long-baseline neutrino oscillation experiment that aims at addressing key questions in neutrino physics in the next decades. Its scientific program includes the detection of the neutrino flux from a core-collapse supernova. The DUNE far detector will have four 17-kt mass liquid-argon (LAr) time-projection chamber (TPC) modules. ProtoDUNE Dual Phase (DP), a dual-phase LAr TPC with 300 t of active mass and 6 m of drift distance, was operated with cosmic muons in 2019-2020 as part of an R&D program at the CERN Neutrino Platform to demonstrate the feasibility of the technology at such a large scale. In a LAr TPC, the photon detection system (PDS) provides fun- damental timing information and trigger capabilities. The PDS of ProtoDUNE-DP, which consisted of 36 photomultiplier tubes (PMTs), counted on a dedicated light calibration system (LCS) to monitor the PMT response. In this dissertation, the characterization and validation of the ProtoDUNE-DP PDS and LCS components before their installation will be reviewed, highlighting the results of general interest for experiments that use liquid noble gasses as target medium. The results from the stable performance of both systems in the detector during 15 months will be presented next as well as the studies on the scintillation light detection in ProtoDUNE-DP, where the collection of light produced in LAr at 7 m from the photosensors has been achieved for the first time. It is worth pointing out that the excellent LAr purity and the large size of the detector have enabled to develop a unique data-driven investigation on aspects that are critical for LAr- based experiments but that are not completely understood. The analyses cover the characterization of the low-energy background detected by the PDS, the quantification of the electric field impact on the light yield, the evaluation of the Rayleigh scattering affecting the light propagation, and the analysis of the PMT detection efficiency. The effect of the VUV reflectivity of the detector materials will be also discussed. In addition, the estimation of the cosmic muon flux crossing the TPC and the study of the observed light yield by the PDS will be reported. Finally, the results from the simulation-based study of the supernova burst trigger capability with the PDS of a 12.1-kt active mass dual-phase LAr TPC as the one proposed for DUNE will be summarized. Several configurations of reflective foils installed in the TPC to enhance the light collection will be compared

Gallego-Ros, Ana↗

Neutronics of Advanced-Fuel Fusion Experiments with DT Triggering

Nuclear fusion studies are currently devoted to the Deuterium-Tritium (DT) fuel cycle, the easiest way to reach ignition. The recent stress on safety by the world community has stimulated the research on other fuel cycles, based on advanced reactions, such as Deuterium-Helium-3 (DHe). With DHe, it is not necessary to breed and fuel tritium. The DHe cycle has a very low presence of energetic fusion neutrons, due to DD and DT side reactions, and it has the possibility to obtain electrical power by direct energy conversion of the protons produced by the fusion reactions. DHe fusion has its own set of problems, such as the availability of {sup 3}He and the attainment of the higher plasma parameters. To explore the possibilities of DHe plasmas, a burning plasma experiment at high magnetic field and high plasma densities is particularly attractive. Ignitor is a proposed compact high-magnetic field tokamak, aimed at studying plasma-burning conditions in Deuterium-Tritium plasmas. The Ignitor experiment is designed to reach ignition under controlled DT burning conditions. The machine parameters have been established, on the basis of existing knowledge of the confinement properties of high density plasmas. The scientific goal of the Ignitor experiment is to approach, for the first time, the ignition conditions of a magnetically confined D-T plasma. However, the plasma density limit in Ignitor being well above the optimal density for DT ignition, is potentially suitable to the higher densities required for DHe burning. In fact, Ignitor has been designed also to explore conditions where 14.7-MeV protons and 3.6-MeV alpha particles produced by the DHe reactions can supply a significant amount of thermal energy to a well-confined plasma. In particular, Ignitor can sustain plasma currents exceeding those required to confine proton orbits at birth, and has more than sufficiently high densities so that the slowing-down time of both the protons and the DT alpha particles is shorter than the electron energy replacement time of the thermal plasma in which they are produced. Preliminary analyses show that a fusion power PF around 2 MW, may be reached. As a start, Ignitor can perform initial studies at the level of approximately 1 MW of power in charged particles from the DHe reaction in a mostly DT plasma. CANDOR, a design evolution of Ignitor in the direction of a reactor using a DHe fuel cycle, has been proposed; it is a feasibility study of a high-field DHe experiment of larger dimensions and higher fusion power than Ignitor, however still based on the core Ignitor technologies. The main characteristics of the CANDOR machine are the following: the major radius Ro is about double than Ignitor, plasma currents up to 25 MA with toroidal magnetic fields B{sub T} = 13 T can be produced. Unlike Ignitor, CANDOR would operate with higher values of poloidal beta around unity and the central part of the plasma column in the Second Stability region. The characteristic times over which the plasma discharge can be sustained are longer by more than a factor of 4 than those of Ignitor. To produce such a strong magnetic field in a larger machine, the toroidal field coils have been divided into two sets of coils and the central solenoid (air core transformer) is placed between them in the inboard part. In CANDOR, the DHe burning regime can be reached, by a combination of ICRF heating and alpha particle heating due to DT fusion reactions, which take the role of a sort of trigger. Thanks to this fact, and unlike other proposed DHe fusion experiments, CANDOR is capable of reaching DHe ignition using the existing technologies, and present knowledge of plasma confinement phenomena. With the initial use of DT, where tritium comprises some 50% of an initial lower density DT plasma, but is not added thereafter, the need for an intense auxiliary heating, which is one of the main technological drawbacks of DHe ignition, would be considerably alleviated, becoming feasible with the present technology. However, this method has the disadvantage of using tritium and of presenting a higher neutron flux (due to DT reactions) than 'pure' DHe plasmas, generating a neutron flux transient when passing from the initial DT trigger reaction to the final DHe burning plasma. However, for an experimental machine one-of-a-kind of relatively small dimensions, this is not an issue. (authors)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Studies on the scintillation light detection in the ProtoDUNE Dual Phase liquid-argon TPC and its capability for the supernova trigger in DUNE

The Deep Underground Neutrino Experiment (DUNE) is a long-baseline neutrino oscillation experiment that aims at addressing key questions in neutrino physics in the next decades. Its scientific program includes the detection of the neutrino flux from a core-collapse supernova. The DUNE far detector will have four 17-kt mass liquid-argon (LAr) time-projection chamber (TPC) modules. ProtoDUNE Dual Phase (DP), a dual-phase LAr TPC with 300 t of active mass and 6 m of drift distance, was operated with cosmic muons in 2019-2020 as part of an R&D program at the CERN Neutrino Platform to demonstrate the feasibility of the technology at such a large scale. In a LAr TPC, the photon detection system (PDS) provides fundamental timing information and trigger capabilities. The PDS of ProtoDUNE-DP, which consisted of 36 photomultiplier tubes (PMTs), counted on a dedicated light calibration system (LCS) to monitor the PMT response. In this dissertation, the characterization and validation of the ProtoDUNE-DP PDS and LCS components before their installation will be reviewed, highlighting the results of general interest for experiments that use liquid noble gasses as target medium. The results from the stable performance of both systems in the detector during 15 months will be presented next as well as the studies on the scintillation light detection in ProtoDUNE-DP, where the collection of light produced in LAr at 7 m from the photosensors has been achieved for the first time. It is worth pointing out that the excellent LAr purity and the large size of the detector have enabled to develop a unique data-driven investigation on aspects that are critical for LAr-based experiments but that are not completely understood. The analyses cover the characterization of the low-energy background detected by the PDS, the quantification of the electric field impact on the light yield, the evaluation of the Rayleigh scattering affecting the light propagation, and the analysis of the PMT detection efficiency. The effect of the VUV reflectivity of the detector materials will be also discussed. In addition, the estimation of the cosmic muon flux crossing the TPC and the study of the observed light yield by the PDS will be reported. Finally, the results from the simulation-based study of the supernova burst trigger capability with the PDS of a 12.1-kt active mass dual-phase LAr TPC as the one proposed for DUNE will be summarized. Several configurations of reflective foils installed in the TPC to enhance the light collection will be compared.

Gallego Ros, Ana↗

Scintillation light calibrations, systematic uncertainties, and triggering efficiency in the MicroBooNE detector

Scintillation light, produced alongside ionisation charge from particle interactions, plays a critical role in liquid argon time projection chamber (LArTPC) detectors. A detailed understanding of its production and detection mechanisms is essential for robust calibration, systematic uncertainty evaluation, and physics analysis. This article describes the MicroBooNE light simulation, light-based triggering schemes, photomultiplier tube gain calibration, light response stability, and light-based systematic uncertainties over the course of five years of data collection. In addition, we present a measurement of scintillation light triggering efficiency, focusing on the lowest-light regime relevant to rare-event searches and low-energy neutrino interactions. Finally, we discuss two notable observations in MicroBooNE's data, both reported here for the first time: an approximately 50% decline in MicroBooNE's light yield over time, concentrated in the first two years of running; and a higher than expected O(200 kHz) rate of single photoelectron noise. The results presented provide an important benchmark of long-term light detection performance in LArTPC neutrino detectors.

Abratenko, P. [Tufts U.]↗

FPGA-based tracking for the CMS Level-1 trigger using the tracklet algorithm

The high instantaneous luminosities expected following the upgrade of the Large Hadron Collider (LHC) to the High-Luminosity LHC (HL-LHC) pose major experimental challenges for the CMS experiment. A central component to allow efficient operation under these conditions is the reconstruction of charged particle trajectories and their inclusion in the hardware based trigger system. There are many challenges involved in achieving this: a large input data rate of about 20–40 Tb/s; processing a new batch of input data every 25 ns, each consisting of about 15,000 precise position measurements and rough transverse momentum measurements of particles (“stubs”); performing the pattern recognition on these stubs to find the trajectories; and producing the list of trajectory parameters within 4 µs. Here, this paper describes a proposed solution to this problem, specifically, it presents a novel approach to pattern recognition and charged particle trajectory reconstruction using an all-FPGA solution. The results of an end-to-end demonstrator system, based on Xilinx Virtex-7 FPGAs, that meets timing and performance requirements are presented along with a further improved, optimized version of the algorithm together with its corresponding expected performance.

47 OTHER INSTRUMENTATION↗

L1 track triggers for ATLAS in the HL-LHC

The HL-LHC, the planned high luminosity upgrade for the LHC, will increase the collision rate in the ATLAS detector approximately a factor of 5 beyond the luminosity for which the detectors were designed, while also increasing the number of pile-up collisions in each event by a similar factor. This means that the level-1 trigger must achieve a higher rejection factor in a more difficult environment. This presentation discusses the challenges that arise in this environment and strategies being considered by ATLAS to include information from the tracking systems in the level-1 decision. The main challenges involve reducing the data volume exported from the tracking system for which two options are under consideration: a region of interest based system and an intelligent sensor method which filters on hits likely to come from higher transverse momentum tracks.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Register-Like Storage Block Used as Histograms, Cluster Buffers, and Hough Transform Accumulators for HEP Trigger Systems

In high energy physics experiment trigger systems, block memories are utilized for various purposes, especially in binned searching algorithms. In these algorithms, the storages are demanded to perform like a large set of registers. The writing and reading operation must be performed in single clock cycle and once an event is processed, the memory must be globally reset. These demands can be fulfilled with registers but the cost of using registers for large memory is unaffordable. Another common requirement is the boundary coverage feature during reading process. Additionally, when a memory bin is addressed, the stored contents in the addressed bin and its neighboring bin must be output simultaneously. In this paper, a register-like block storage design scheme is described, which allows updating memory locations in single clock cycle, reading two adjacent bins, and effectively refreshing entire memory within a single clock. The implementation and test results are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Performance of the NA62 trigger system

The NA62 experiment at CERN targets the measurement of the ultra-rare $K^{+}→π^{+}ν\bar{ν}$ decay, and carries out a broad physics programme that includes probes for symmetry violations and searches for exotic particles. Data were collected in 2016–2018 using a multi-level trigger system, which is described highlighting performance studies based on 2018 data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The CLAS12 Trigger System

This article describes the CLAS12 Trigger System. The simulation, hardware, and software design, as well as all validation procedures, are discussed here. The firmware development tools used are discussed as well, including our experience with VIVADO High Level Synthesis.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The high level trigger and express data production at STAR

To meet the demands of the Beam Energy Scan phase-II (BES-II) program, the STAR experiment at the Relativistic Heavy Ion Collider (RHIC) developed a dual real-time framework consisting of a High Level Trigger (HLT) and an Express Data Production system (xProduction). The HLT operates online within the Data Acquisition (DAQ) chain on a dedicated multi-core CPU cluster with the option to offload compute-intensive kernels to Xeon Phi coprocessors. It uses parallelized algorithms, such as the Cellular Automaton (CA) Track Finder, to perform rapid tracking, vertexing, and event filtering. This allows it to select events of interest in real time and provide immediate feedback on detector and beam conditions. In contrast, the xProduction workflow runs concurrently and independently of the DAQ loop. It applies near offline-quality calibration and reconstruction within hours of data collection. The xProduction input is the express data stream, whose content can be enriched by HLT trigger/priority selections under DAQ/HLT resource constraints, and it uses the STAR calibration/conditions framework, incorporating online calibration/QA information when available. This enables early preliminary physics analysis, including the reconstruction of rare signals, such as hyperons and hypernuclei. It also provides collaboration-wide access to analysis-ready datasets. Together, the HLT and xProduction systems form a complementary architecture: the HLT performs online event selection while the xProduction chain delivers high-quality results within a short amount of time. This integrated framework has enabled the prompt reconstruction of the $^5_Λ$ He hypernucleus with high statistical significance and the efficient processing of hundreds of millions of heavy-ion collision events. In conclusion, its demonstrated scalability and robustness establish a model for future high-luminosity experiments requiring both online event filtering and rapid access to analysis-quality data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Activation and Assembly of Plasmonic-Magnetic Nanosurfactants for Encapsulation and Triggered Release

Multifunctional surfactants hold great potentials in catalysis, separation, and biomedicine. Highly active plasmonic-magnetic nanosurfactants are developed through a novel acid activation treatment of Au–Fe 3 O 4 dumbbell nanocrystals. The activation step significantly boosts nanosurfactant surface energy and enables the strong adsorption at interfaces, which reduces the interfacial energy one order of magnitude. Mediated through the adsorption at the emulsion interfaces, the nanosurfactants are further constructed into free-standing hierarchical structures, including capsules, inverse capsules, and two-dimensional sheets. The nanosurfactant orientation and assembly structures follow the same packing parameter principles of surfactant molecules. Furthermore, nanosurfactants demonstrate the capability to disperse and encapsulate homogeneous nanoparticles and small molecules without adding any molecular surfactants. The assembled structures are responsive to external magnetic field, and triggered release is achieved using an infrared laser by taking advantage of the enhanced surface plasmon resonance of nanosurfactant assemblies. Finally, solvent and pH changes are also utilized to achieve the cargo release.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A readout digitization system for the ATLAS muon spectrometer phase-I tRPC trigger upgrade

The front-end digitization electronics for thin-Resistive Plate Chambers to be installed as part of the ATLAS Muon Spectrometer Phase-I upgrade project is described. Here, the design is based on the CERN HPTDC and GOL chips. In this paper, the design of the digitization system is presented, including power, connection interfaces to front-end amplifier-shaper-discriminator board and to the low level trigger processor board. System performance tests were conducted and validated with a prototype which includes one HPTDC/GOL pair.

Digital electronic circuits↗

Signal processing in the neutral-trigger system of the CMD-3 detector

A method for calorimeter-signal processing intended for deriving input signals for the neutral trigger is considered. An algorithm for digitizing signals is described in detail, along with a simulation of its operation. A brief account of data obtained in tests of a prototype of the signal-processing module that employs the developed algorithm is given.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High-Power Microwave Switch Employing Electron Beam Triggering

A high-power active microwave pulse compressor is described that modulates the quality factor Q of the energy storage cavity by a new means involving mode conversion controlled by a triggered electron-beam discharge through a switch cavity. The electron beam is emitted from a diamond-coated molybdenum cathode. This report describes the principle of operation, the design of the switch, the configuration used for the test, and the experimental results. The pulse compressor produced output pulses with 140 - 165 MW peak power, power gain of 16 - 20, and pulse duration of 16 - 20 ns at a frequency of 11.43 GHz.

43 PARTICLE ACCELERATORS↗

Taus and the Trigger for Discovery at ATLAS

This five year grant allowed Yale Professor Sarah Demers and her students and postdocs to contribute to the ATLAS Experiment at CERN's Large Hadron Collider. We worked on a particular mode of the Higgs Boson decay, contributing to the discovery of this particle as well as measuring the particle's properties. We also performed a "first of its kind" measurement at a hadron collider in the measurement of tau polarization, which increased the sensitivity of ATLAS in a number of exciting ways, both for making measurements of known particles and for hunting for new ones. We also contributed to the tau trigger - the real-time selection that chooses data that includes the signature of the tau lepton. Four PhD students in the Yale Physics Department received their PhDs during the term of this grant, with at least partial support from the grant.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗