Search NASA⌕ Search

SEARCH · Search NASA

Results for “Two dimensional flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Analytical estimates of turbulent MHD transport coefficients

Turbulent transfer rates from small-scale MHD excitations to large-scale Fourier modes are calculated algebraically, using the method of Biskamp and Welter. Three cases are considered: two-dimensional Navier-Stokes flows, two-dimensional incompressible MHD, and the weakly three-dimensional Strauss equations. In all cases, an initially large spectral gap between the small-scale and large-scale excitations is assumed, and attention focusses on the initial values of the back-transfer rates. The sign of the transfer is determined by the sign of an analytically calculable eddy viscosity and/or anomalous resistivity. We are able to confirm the results of Biskamp and Welter for the case of two-dimensional MHD, but find some differences for the case of the Strauss equations. It is argued that the Strauss equations may not exhibit an inverse cascade phenomenon for the spatially periodic case unless their initial spectra are such that the behavior is essentially that of two-dimensional MHD.

Montgomery, D.↗
NASA NTRS1981

Experimental and numerical studies of the incompressible viscous flow over a two-dimensional airfoil

Physical and numerical experiments for the low Reynolds number flow over a two-dimensional NACA 66(3)-018 airfoil have been performed. Pressure distributions and smoke flow photographs have been obtained for a Reynolds number based on airfoil chord and free-stream conditions of approximately 40,000 at angles of attack of 0 and 6 deg, and for a Reynolds number based on airfoil chord and free-stream conditions of approximately 400,000 at angles of attack of 0 and 12 deg in a low turbulence wind tunnel. Finite difference numerical experiments, using an approximate factorization method, have been obtained for a Reynolds number of 40,000 at angles of attack of 0 and 6 deg. Although the comparison of the wind tunnel and computer results is encouraging, further studies of this type are clearly necessary.

Mueller, T. J.↗
NASA NTRS1984

Navier-Stokes solutions for two-dimensional subsonic base flow

Methods for determining the effects of mass injection from the trailing edge of a bluff body at low speeds and in transonic flow were numerically studied along with an unmodified blunt-based body to gain insight into the effects of vortex shedding on the base drag. The methodology used to obtain finite-difference solutions to the Navier-Stokes equations for subsonic compressible two-dimensional near-wake flows is presented. The effectiveness of an introduced outflow boundary condition which minimizes reflections back into the computational domain was demonstrated with the solution of a model vortex problem. Calculations of the near-wake flow past a circular cylinder were in excellent agreement with experimental data. Laminar-flow solutions for a blunt-based model with and without a base cavity and with mass injection into the wake agreed qualitatively with experimental observations. The drag reduction capability provided by such base modifications was demonstrated.

Rudy, D. H.↗
NASA NTRS1993

Two-dimensional CFD modeling of wave rotor flow dynamics

A two-dimensional Navier-Stokes solver developed for detailed study of wave rotor flow dynamics is described. The CFD model is helping characterize important loss mechanisms within the wave rotor. The wave rotor stationary ports and the moving rotor passages are resolved on multiple computational grid blocks. The finite-volume form of the thin-layer Navier-Stokes equations with laminar viscosity are integrated in time using a four-stage Runge-Kutta scheme. The Roe approximate Riemann solution scheme or the computationally less expensive Advection Upstream Splitting Method (AUSM) flux-splitting scheme are used to effect upwind-differencing of the inviscid flux terms, using cell interface primitive variables set by MUSCL-type interpolation. The diffusion terms are central-differenced. The solver is validated using a steady shock/laminar boundary layer interaction problem and an unsteady, inviscid wave rotor passage gradual opening problem. A model inlet port/passage charging problem is simulated and key features of the unsteady wave rotor flow field are identified. Lastly, the medium pressure inlet port and high pressure outlet port portion of the NASA Lewis Research Center experimental divider cycle is simulated and computed results are compared with experimental measurements. The model accurately predicts the wave timing within the rotor passage and the distribution of flow variables in the stationary inlet port region.

Welch, Gerard E.↗
NASA NTRS1994

Two-dimensional CFD modeling of wave rotor flow dynamics

A two-dimensional Navier-Stokes solver developed for detailed study of wave rotor flow dynamics is described. The CFD model is helping characterize important loss mechanisms within the wave rotor. The wave rotor stationary ports and the moving rotor passages are resolved on multiple computational grid blocks. The finite-volume form of the thin-layer Navier-Stokes equations with laminar viscosity are integrated in time using a four-stage Runge-Kutta scheme. Roe's approximate Riemann solution scheme or the computationally less expensive advection upstream splitting method (AUSM) flux-splitting scheme is used to effect upwind-differencing of the inviscid flux terms, using cell interface primitive variables set by MUSCL-type interpolation. The diffusion terms are central-differenced. The solver is validated using a steady shock/laminar boundary layer interaction problem and an unsteady, inviscid wave rotor passage gradual opening problem. A model inlet port/passage charging problem is simulated and key features of the unsteady wave rotor flow field are identified. Lastly, the medium pressure inlet port and high pressure outlet port portion of the NASA Lewis Research Center experimental divider cycle is simulated and computed results are compared with experimental measurements. The model accurately predicts the wave timing within the rotor passages and the distribution of flow variables in the stationary inlet port region.

Welch, Gerard E.↗
NASA NTRS1994

Nonlinear Instability of a Uni-directional Transversely Sheared Mean Flow

It is well known that the presence of a weak cross flow in an otherwise two-dimensional shear flow results in a spanwise variation in the mean streamwise velocity profile that can lead to an amplification of certain three-dimensional disturbances through a kind of resonant-interaction mechanism (Goldstein and Wundrow 1994). The spatial evolution of an initially linear, finite-growth-rate, instability wave in such a spanwise-varying shear flow is considered, The base flow, which is governed by the three-dimensional parabolized Navier-Stokes equations, is initiated by imposing a spanwise- periodic cross-flow velocity on an otherwise two-dimensional shear flow at some fixed streamwise location. The resulting mean-flow distortion initially grows with increasing streamwise distance, reaches a maximum and eventually decays through the action of viscosity. This decay, which coincides with the viscous spread of of the shear layer, means that the local growth rate of the instability wave will eventually decrease as the wave propagates downstream. Nonlinear effects can then become important within a thin spanwise-modulated critical layer once the local instability-wave amplitude and growth rate become sufficiently large and small, respectively. The amplitude equation that describes this stage of evolution is shown to be a generalization of the one obtained by Goldstein and Choi (1989) who considered the related problem of the interaction of two oblique modes in a two-dimensional shear layer.

Wundrow, David W.↗
NASA NTRS1981

Subcritical transition to turbulence in planar shear flows

The two-dimensional steady and time dependent properties of plane Poiseuille and plane Couette flows are analyzed using iterative techniques and full numerical simulation of the Navier-Stokes equations. It is shown that the finite-amplitude two-dimensional states investigated are strongly unstable to very small three-dimensional perturbations. It is also shown, through full numerical simulation, that this explosive secondary instability can explain the subcritical transitions that occur in real flows. Finally, it is shown that the three-dimensional instability can be analyzed by a linear stability analysis of a two-dimensional flow consisting of the basic parallel flow and a steady (or quasi-steady) finite-amplitude two-dimensional cellular motion.

Orszag, S. A.↗
NASA NTRS1986

Two-dimensional nonsteady viscous flow simulation on the Navier-Stokes computer miniNode

The needs of large-scale scientific computation are outpacing the growth in performance of mainframe supercomputers. In particular, problems in fluid mechanics involving complex flow simulations require far more speed and capacity than that provided by current and proposed Class VI supercomputers. To address this concern, the Navier-Stokes Computer (NSC) was developed. The NSC is a parallel-processing machine, comprised of individual Nodes, each comparable in performance to current supercomputers. The global architecture is that of a hypercube, and a 128-Node NSC has been designed. New architectural features, such as a reconfigurable many-function ALU pipeline and a multifunction memory-ALU switch, have provided the capability to efficiently implement a wide range of algorithms. Efficient algorithms typically involve numerically intensive tasks, which often include conditional operations. These operations may be efficiently implemented on the NSC without, in general, sacrificing vector-processing speed. To illustrate the architecture, programming, and several of the capabilities of the NSC, the simulation of two-dimensional, nonsteady viscous flows on a prototype Node, called the miniNode, is presented.

Nosenchuck, Daniel M.↗
NASA NTRS1984

Sound generated by instability waves of supersonic flows. I Two-dimensional mixing layers. II - Axisymmetric jets

An investigation is conducted of the phenomenon of sound generation by spatially growing instability waves in high-speed flows. It is pointed out that this process of noise generation is most effective when the flow is supersonic relative to the ambient speed of sound. The inner and outer asymptotic expansions corresponding to an excited instability wave in a two-dimensional mixing layer and its associated acoustic fields are constructed in terms of the inner and outer spatial variables. In matching the solutions, the intermediate matching principle of Van Dyke and Cole is followed. The validity of the theory is tested by applying it to an axisymmetric supersonic jet and comparing the calculated results with experimental measurements. Very favorable agreements are found both in the calculated instability-wave amplitude distribution (the inner solution) and the near pressure field level contours (the outer solution) in each case.

Tam, C. K. W.↗
NASA NTRS1989

A block-corrected subdomain solution procedure for recirculating flow calculations

This paper describes a robust and efficient subdomain solution procedure for two-dimensional recirculating flows. The solution domain is divided into a number of overlapping subdomains, and a direct fully coupled solution is obtained for each subdomain using a sparse matrix form of LU decomposition. An effective parabolic block correction procedure, which calculates global corrections to the tentative solution by a marching technique similar to that used for boundary layer flows, is used to accelerate the convergence of the basic procedure. The use of effective block correction is found to be essential for the success of the subdomain approach on strongly recirculating flows. In a number of laminar two-dimensional flows, the new block-corrected method performed extremely well, rivaling the best direct methods in execution time, while requiring substantially less computer storage. The new method proved to be from two to ten times faster than conventional iterative methods, while requiring only a moderate increase in storage.

Braaten, M. E.↗
NASA NTRS1979

A model of transverse fuel injection applied to the computation of supersonic combustor flow

A two-dimensional, nonreacting flow model of the aerodynamic interaction of a transverse hydrogen jet within a supersonic mainstream has been developed. The model assumes profile shapes of mass flux, pressure, flow angle, and hydrogen concentration and produces downstream profiles of the other flow parameters under the constraints of the integrated conservation equations. These profiles are used as starting conditions for an existing finite difference parabolic computer code for the turbulent supersonic combustion of hydrogen. Integrated mixing and flow profile results obtained from the computer code compare favorably with existing data for the supersonic combustion of hydrogen.

Rogers, R. C.↗
NASA NTRS1972

Numerical solutions of the Navier-Stokes equations for the supersonic laminar flow over a two-dimensional compression corner

Numerical solutions have been obtained for the supersonic, laminar flow over a two-dimensional compression corner. These solutions were obtained as steady-state solutions to the unsteady Navier-Stokes equations using the finite difference method of Brailovskaya, which has second-order accuracy in the spatial coordinates. Good agreement was obtained between the computed results and wall pressure distributions measured experimentally for Mach numbers of 4 and 6.06, and respective Reynolds numbers, based on free-stream conditions and the distance from the leading edge to the corner. In those calculations, as well as in others, sufficient resolution was obtained to show the streamline pattern in the separation bubble. Upstream boundary conditions to the compression corner flow were provided by numerically solving the unsteady Navier-Stokes equations for the flat plate flow field, beginning at the leading edge. The compression corner flow field was enclosed by a computational boundary with the unknown boundary conditions supplied by extrapolation from internally computed points.

Carter, J. E.↗
NASA NTRS1986

Efficient solutions of two-dimensional incompressible steady viscous flows

A simple, efficient, and robust numerical technique is provided for solving two dimensional incompressible steady viscous flows at moderate to high Reynolds numbers. The proposed approach employs an incremental multigrid method and an extrapolation procedure based on minimum residual concepts to accelerate the convergence rate of a robust block-line-Gauss-Seidel solver for the vorticity-stream function Navier-Stokes equations. Results are presented for the driven cavity flow problem using uniform and nonuniform grids and for the flow past a backward facing step in a channel. For this second problem, mesh refinement and Richardson extrapolation are used to obtain useful benchmark solutions in the full range of Reynolds numbers at which steady laminar flow is established.

Morrison, J. H.↗
NASA NTRS1988

Efficient solutions of two-dimensional incompressible steady viscous flows

A simple, efficient, and robust numerical technique is provided for solving two dimensional incompressible steady viscous flows at moderate to high Reynolds numbers. The proposed approach employs an incremental multigrid method and an extrapolation procedure based on minimum residual concepts to accelerate the convergence rate of a robust block-line-Gauss-Seidel solver for the vorticity-stream function Navier-Stokes equations. Results are presented for the driven cavity flow problem using uniform and nonuniform grids and for the flow past a backward facing step in a channel. For this second problem, mesh refinement and Richardson extrapolation are used to obtain useful benchmark solutions in the full range of Reynolds numbers at which steady laminar flow is established.

Morrison, J. H.↗
NASA NTRS1978

A computer program for calculating laminar and turbulent boundary layers for two-dimensional time-dependent flows

A computer program is described which provides solutions of two dimensional equations appropriate to laminar and turbulent boundary layers for boundary conditions with an external flow which fluctuates in magnitude. The program is based on the numerical solution of the governing boundary layer equations by an efficient two point finite difference method. An eddy viscosity formulation was used to model the Reynolds shear stress term. The main features of the method are briefly described and instructions for the computer program with a listing are provided. Sample calculations to demonstrate its usage and capabilities for laminar and turbulent unsteady boundary layers with an external flow which fluctuated in magnitude are presented.

Cebeci, T.↗