Search NASA⌕ Search

SEARCH · Search NASA

Results for “VAPOR PHASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

1.55-μm mode-locked quantum-dot lasers with 300 MHz frequency tuning range

Passive mode-locking of two-section quantum-dot mode-locked lasers grown by metalorganic vapor phase epitaxy on InP is reported. 1250-μm long lasers exhibit a wide tuning range of 300 MHz around the fundamental mode-locking frequency of 33.48 GHz. The frequency tuning is achieved by varying the reverse bias of the saturable absorber from 0 to −2.2 V and the gain section current from 90 to 280 mA. 3 dB optical spectra width of 6–7 nm leads to ex-facet optical pulses with full-width half-maximum down to 3.7 ps. Single-section quantum-dot mode-locked lasers show 0.8 ps broad optical pulses after external fiber-based compression. Injection current tuning from 70 to 300 mA leads to 30 MHz frequency tuning.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Curvature and bow of bulk GaN substrates

We investigate the bow of free standing (0001) oriented hydride vapor phase epitaxy grown GaN substrates and demonstrate that their curvature is consistent with a compressive to tensile stress gradient (bottom to top) present in the substrates. The origin of the stress gradient and the curvature is attributed to the correlated inclination of edge threading dislocation (TD) lines away from the [0001] direction. A model is proposed and a relation is derived for bulk GaN substrate curvature dependence on the inclination angle and the density of TDs. The model is used to analyze the curvature for commercially available GaN substrates as determined by high resolution x-ray diffraction. The results show a close correlation between the experimentally determined parameters and those predicted from theoretical model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Raman spectroscopy of InGaAs/GaAs nanoheterostructures δ-doped with Mn

The results of complex studies of InGaAs/GaAs nanoheterostructures δ-doped with Mn are reported. The structures are grown by metal-organic vapor-phase epitaxy in combination with laser deposition. By confocal Raman spectroscopy, it is shown that the low-temperature δ-doped GaAs cap layers are of higher crystal quality compared to uniformly doped layers. Scattering of light in the coupled phonon-plasmon mode is observed. The appearance of this mode is conditioned by the diffusion of manganese from the δ-layer. The thickness of the cap layer is found to be d{sub c} ≈ 9–20 nm, optimal for attainment of the highest photoluminescence intensity of the quantum well and the highest layer concentration of holes by doping with manganese.

36 MATERIALS SCIENCE↗

Surface passivation of tellurium-doped GaAs nanowires by GaP: Effect on electrical conduction

We report on the surface passivation of Au-assisted Te-doped GaAs nanowires (NWs) grown by metalorganic vapor phase epitaxy. The electrical properties of individual free standing NWs were assessed using a tungsten nano-probe inside a scanning electron microscope. The diameter independent apparent resistivity of both strained and relaxed passivated NWs suggests the unpinning of the Fermi level and reduction of sidewalls surface states density. Similar current-voltage properties were observed for partially axially relaxed GaAs/GaP NWs. This indicates a negligible contribution of misfit dislocations in the charge transport properties of the NWs. Low temperature micro-photoluminescence (μ-PL) measurements were also carried out for both uncapped and passivated GaAs NWs. The improvement of the integrated (μ-PL) intensity for GaAs/GaP NWs further confirms the effect of passivation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Growth and optical characteristics of high-quality ZnO thin films on graphene layers

We report the growth of high-quality, smooth, and flat ZnO thin films on graphene layers and their photoluminescence (PL) characteristics. For the growth of high-quality ZnO thin films on graphene layers, ZnO nanowalls were grown using metal-organic vapor-phase epitaxy on oxygen-plasma treated graphene layers as an intermediate layer. PL measurements were conducted at low temperatures to examine strong near-band-edge emission peaks. The full-width-at-half-maximum value of the dominant PL emission peak was as narrow as 4 meV at T = 11 K, comparable to that of the best-quality films reported previously. Furthermore, the stimulated emission of ZnO thin films on the graphene layers was observed at the low excitation energy of 180 kW/cm{sup 2} at room temperature. Their structural and optical characteristics were investigated using X-ray diffraction, transmission electron microscopy, and PL spectroscopy.

36 MATERIALS SCIENCE↗

InAs/GaAs quantum dots on GaAs-on-V-grooved-Si substrate with high optical quality in the 1.3 μm band

We report self-assembled InAs/GaAs quantum dots (QDs) grown on a specially engineered GaAs-on-V-grooved-Si substrate by metal-organic vapor phase epitaxy. Recessed pockets formed on V-groove patterned Si (001) substrates were used to prevent most of the hetero-interfacial stacking faults from extending into the upper QD active region. 1.3 μm room temperature emission from high-density (5.6 × 10{sup 10 }cm{sup −2}) QDs has been obtained, with a narrow full-width-at-half-maximum of 29 meV. Optical quality of the QDs was found to be better than those grown on conventional planar offcut Si templates, as indicated by temperature-dependent photoluminescence analysis. Results suggest great potential to integrate QD lasers on a Si complementary-metal-oxide-semiconductor compatible platform using such GaAs on Si templates.

36 MATERIALS SCIENCE↗

Heavily doped GaAs:Te layers grown by MOVPE using diisopropyl telluride as a source

The capabilities of GaAs epitaxial layers extremely heavily doped with tellurium by metal-organic vapor-phase epitaxy using diisopropyl telluride as a source are studied. It is shown that tellurium incorporation into GaAs occurs to an atomic concentration of 10{sup 21} cm{sup –3} without appreciable diffusion and segregation effects. Good carrier concentrations (2 × 10{sup 19} cm{sup –3}) and specific contact resistances of non-alloyed ohmic contacts (1.7 × 10{sup –6} Ω cm{sup 2}) give grounds to use such layers to create non-alloyed ohmic contacts in electronic devices. A sharp decrease in the electrical activity of Te atoms, a decrease in the electron mobility, and an increase in the contact resistance at atomic concentrations above 2 × 10{sup 20} cm{sup –3} are detected.

36 MATERIALS SCIENCE↗

Elimination of trench defects and V-pits from InGaN/GaN structures

The microstructural evolution of InGaN/GaN multiple quantum wells grown by metalorganic chemical vapor phase epitaxy was studied as a function of the growth temperature of the GaN quantum barriers (QBs). We observed the formation of basal stacking faults (BSFs) in GaN QBs grown at low temperature. The presence of BSFs terminated by stacking mismatch boundaries (SMBs) leads to the opening of the structure at the surface into a V-shaped trench loop. This trench may form above an SMB, thereby terminating the BSF, or above a junction between the SMB and a subsequent BSF. Fewer BSFs and thus fewer trench defects were observed in GaN QBs grown at temperatures higher than 830 °C. Further increase in the growth temperature of the GaN QBs led to the suppression of the threading dislocation opening into V-pits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron channeling contrast imaging investigation of stacking fault pyramids in GaP on Si nucleation layers

Thin gallium phosphide layers were deposited on (0 0 1) Silicon surfaces via organometallic vapor phase epitaxy and characterized by electron channeling contrast imaging (ECCI). Stacking fault pyramids at a density of up to 6 x 10 7 cm -2 were identified in the GaP nucleation layer by varying the diffraction conditions. We show that these defects originate at the GaP/Si interface and propagate on all four {1 1 1} planes. We observed that such stacking fault pyramids interact with the gliding of misfit dislocations during lattice-mismatched growth and enhance the threading dislocation density. The initial pulsing of TEGa and TBP during the nucleation of GaP on Silicon has been found to strongly influence the formation of those pyramidal defects. Changing the number of pulse cycles allowed us to lower their density by two orders of magnitude from 6 x 10 7 cm -2 to 4 x 10 5 cm -2 .

36 MATERIALS SCIENCE↗

Two-band lasing in epitaxially stacked tunnel-junction semiconductor lasers

Epitaxially stacked tunnel-junction laser hetero structures were grown by hydride metalorganic vapor-phase epitaxy in the system of AlGaAs/GaAs/In GaAs alloys. Based on such structures, mesa stripe lasers with an aperture of 150 s- 7 m were fabricated. The possibility of controlling the lasing wavelength by varying the active region thickness in each tunnel-junction laser structure was demonstrated. Independent two-band lasing at wavelengths of 914 and 925 nm (the difference frequency is 2.3 THz) was achieved at a maximum optical radiation power of 20 W in each band of the epitaxially stacked tunnel-junction semiconductor laser.

36 MATERIALS SCIENCE↗

Microstructure and micro-Raman studies of nitridation and structure transition of gallium oxide nanowires

Here we present a detailed study on nitridation and structure transition in monoclinic gallium oxide ({beta}-Ga{sub 2}O{sub 3}) nanowires grown on Si substrates with chemical vapor phase epitaxy. The nanowires were systematically nitridated at different temperatures. Their morphologies and microstructures were precisely characterized using field-emission scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), and confocal micro-Raman spectroscopy. It is found that heat treatment of Ga{sub 2}O{sub 3} nanowires in the gas of ammonia results in rich substructures including the Ga{sub 2}O{sub 3} phase, the crystalline GaN phase, and other meta structures. The identification of these structures helps to understand some interesting phenomena observed in nanostructures, such as the microstructural origin of the unknown Raman lines in GaN nanowires. - Highlights: Black-Right-Pointing-Pointer Nitridation and structure transition of Ga{sub 2}O{sub 3} significantly depend on temperature. Black-Right-Pointing-Pointer G-N bonds form at lower temperatures but the Ga{sub 2}O{sub 3} lattice is still dominant. Black-Right-Pointing-Pointer Amorphous GaN coexists with crystalline Ga{sub 2}O{sub 3} at higher temperatures. Black-Right-Pointing-Pointer Crystalline GaN with distinct morphology is obtained at much higher temperatures.

36 MATERIALS SCIENCE↗

Study of minority carrier diffusion lengths in photoactive layers of multijunction solar cells

A technique for determining a minority carrier's diffusion length in photoactive III-V layers of solar cells by approximating their spectral characteristics is presented. Single-junction GaAs, Ge and multi-junction GaAs/Ge, GaInP/GaAs, and GaInP/GaInAs/Ge solar cells fabricated by hydride metal-organic vapor-phase epitaxy (H-MOVPE) have been studied. The dependences of the minority carrier diffusion length on the doping level of p-Ge and n-GaAs are determined. It is shown that the parameters of solid-state diffusion of phosphorus atoms to the p-Ge substrate from the n-GaInP nucleation layer are independent of the thickness of the latter within 35-300 nm. It is found that the diffusion length of subcells of multijunction structures in Ga(In)As layers is smaller in comparison with that of single-junction structures.

36 MATERIALS SCIENCE↗

Electroluminescence in p-InAs/AlSb/InAsSb/AlSb/p(n)-GaSb type II heterostructures with deep quantum wells at the interface

Luminescent characteristics of asymmetric p-InAs/AlSb/InAsSb/AlSb/p-GaSb type II heterostructures with deep quantum wells at the heterointerface are studied. The heterostructures were grown by metalorganic vapor phase epitaxy. Intense positive and negative luminescence was observed in the range of photon energies of 0.3-0.4 eV with a forward and reverse bias, respectively. Dependences of the spectra and intensities for positive and negative luminescence on the pumping current and on the temperature are studied in the range of 77-380 K. It is established that, at a temperature higher than 75 deg. C, intensity of negative luminescence surpasses that of positive luminescence by 60%. The suggested heterostructures can be used as lightemitting diodes (photodiodes) with switched positive and negative luminescence in the mid-IR spectral range of 3-4 {mu}m.

36 MATERIALS SCIENCE↗

Highly efficient non-degenerate four-wave mixing under dual-mode injection in InP/InAs quantum-dash and quantum-dot lasers at 1.55 μm

This work reports on non-degenerate four-wave mixing under dual-mode injection in metalorganic vapor phase epitaxy grown InP/InAs quantum-dash and quantum dot Fabry-Perot laser operating at 1550 nm. High values of normalized conversion efficiency of −18.6 dB, optical signal-to-noise ratio of 37 dB, and third order optical susceptibility normalized to material gain χ{sup (3)}/g{sub 0} of ∼4 × 10{sup −19} m{sup 3}/V{sup 3} are measured for 1490 μm long quantum-dash lasers. These values are similar to those obtained with distributed-feedback lasers and semiconductor optical amplifiers, which are much more complicated to fabricate. On the other hand, due to the faster gain saturation and enhanced modulation of carrier populations, quantum-dot lasers demonstrate 12 dB lower conversion efficiency and 4 times lower χ{sup (3)}/g{sub 0} compared to quantum dash lasers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetoresistance effects and spin-valve like behavior of an arrangement of two MnAs nanoclusters

We report on magnetotransport measurements on a MnAs nanocluster arrangement consisting of two elongated single-domain clusters connected by a metal spacer. The arrangement was grown on GaAs(111)B-substrates by selective-area metal organic vapor phase epitaxy. Its structural properties were investigated using scanning-electron microscopy and atomic-force microscopy, while its magnetic domain structure was analyzed by magnetic-force microscopy. The magnetoresistance of the arrangement was investigated at 120 K for two measurement geometries with the magnetic field oriented in the sample plane. For both geometries, discrete jumps of the magnetoresistance of the MnAs nanocluster arrangement were observed. These jumps can be explained by magnetic-field induced switching of the relative orientation of the magnetizations of the two clusters which affects the spin-dependent scattering in the interface region between the clusters. For a magnetic field orientation parallel to the nanoclusters' elongation direction a spin-valve like behavior was observed, showing that ferromagnetic nanoclusters may be suitable building blocks for planar magnetoelectronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dislocation-related trap levels in nitride-based light emitting diodes

Deep level transient spectroscopy was performed on InGaN/GaN multiple quantum well light emitting diodes (LEDs) in order to determine the effect of the dislocation density on the deep intragap electronic levels. The LEDs were grown by metalorganic vapor phase epitaxy on GaN templates with a high dislocation density of 8 × 10{sup 9} cm{sup −2} and a low dislocation density of 3 × 10{sup 8} cm{sup −2}. Three trapping levels for electrons were revealed, named A, A1, and B, with energies E{sub A} ≈ 0.04 eV, E{sub A1} ≈ 0.13 eV, and E{sub B} ≈ 0.54 eV, respectively. The trapping level A has a much higher concentration in the LEDs grown on the template with a high density of dislocations. The logarithmic dependence of the peak amplitude on the bias pulse width for traps A and A1 identifies the defects responsible for these traps as associated with linearly arranged defects. We conclude that traps A and A1 are dislocation-related intragap energy levels.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Machine Learning Model for Predicting Composition of Catalytic Coprocessing Products from Molecular Beam Mass Spectra

Demand for the development of an automated and integrated refining process for biofuels has increased in recent years due to the lack of generalized process inspection tools. In bio-oil upgrading processes, all process variables are maintained based on the offline specification of intermediates and products. A lack of real-time product specifications in batch-wise monitoring can cause process failure and wasted resources. Therefore, there is a need for a fast and accurate intermediates/product specification tool that can be used for real-time specification to reduce waste and mitigate the risk of process failure. Here, to address this gap, we developed a machine learning (ML) model for predicting speciated bio-oil composition, including paraffin, iso-paraffins, olefins, naphthene, and aromatics. The model is trained using the mass spectra from upgraded products collected in the vapor phase before condensation and predicts the composition of the condensed product. Training ML models using raw mass spectra is challenging due to numerous overlapped peaks originating from different parent compounds. With this in mind, we propose a protocol that (i) transforms raw mass spectra to chemistry-inspired predefined features and (ii) trains decision tree-based models using these features. Our results show that the random forest model was robust against overfitting and had the highest accuracy compared to other models. Moreover, a stochastic ablation method determined the eight most significant features while maximizing the accuracy. Our protocol facilitates real-time compositional analysis of upgraded bio-oils and thus real-time process monitoring. Additionally, this protocol enables the rational design of efficient catalysts and the determination of optimal process conditions.

09 BIOMASS FUELS↗

Semipolar single component GaN on planar high index Si(11h) substrates

We present metal organic vapor phase epitaxy growth of polarization reduced, single component GaN on nonpatterned Si(112), Si(113), Si(114), Si(115), and Si(116) substrates. We find that the inclination angle of GaN c-axis with respect to the surface normal depends on the angle between Si(111) and above mentioned Si(11h)-surfaces. The growth of the GaN layer is essentially performed as c-axis oriented growth on the naturally occurring Si(111) facets of these Si(11h)-surfaces. The c-axis tilt-angle of GaN crystallites depends on the Si-surface direction and increases from Si(112) to Si(116) planes. GaN layers are investigated by x-ray analysis and scanning electron microscopy.

36 MATERIALS SCIENCE↗