Search NASA⌕ Search

SEARCH · Search NASA

Results for “Vortex generators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Semiempirical method for predicting vortex-induced rolling moments

A method is described for the prediction of rolling moments on a wing penetrating a vortex velocity field generated by a large aircraft. Rolling moments are determined from lifting pressure coefficients computed with an inviscid-flow linear panel method. Two empirical corrections are included to account for the lifting efficiency of an airfoil section and the local stall on the wing. Predicted rolling moments are compared with those from two windtunnel experiments. Results indicate that experimental rolling moments, for which the Reynolds number of the following wing is low, should be interpreted with caution.

Allison, D. O.↗

Basic studies on delta wing flow modifications by means of apex fences

The effectiveness of apex fences on a 60-deg delta wing at low speeds was experimentally investigated. Resembling highly swept spoilers in appearance, the fences are designed to fold out of the wing apex region upper surface near the leading edges, where they generate a powerful vortex pair. The intense suction of the fence vortices augments lift in the apex region, the resulting positive pitching moment being utilized to trim trailing edge flaps for lift augmentation during approach and landing at relatively low angles of attack. The fences reduce the apex lift at high angles of attack, leading to a desirable nose-down moment. The above projected functions of the apex fence device were validated and quantified through low speed tunnel tests, comprising upper surface pressure surveys on a semispan model and balance measurements on a geometrically similar fully span wing/body configuration. Fence parameters such as area, shape, hinge position and deflection angle were investigated. Typical results are presented indicating the apex fence potential in controlling the longitudinal characteristics of a tail-less delta.

Hoffler, K. D.↗

Experimental and analytical studies in fluids

The first objective was to analyze and design a true airspeed sensor which will replace the conventional pitot-static pressure transducer for small commercial aircraft. The second objective was to obtain a numerical solution and predict the frequency response which is generated by the vortex whistle at a certain airspeed. It was concluded flow rate measurements indicate that the vortex tube sound frequency is linearly proportional to the frequency response. The vortex tube whistle frequency is dependent upon geometrical parameters to such an extent that: an increase in vortex tube length produces a decrease in frequency response and that an increase in the exhaust nozzle length produces an increase in the frequency precession. An increase in the vortex tube diameter produces a decrease in frequency precession. An increase in swirler diameter produces a decrease in frequency. An increase in the location distance of the microphone pickup signal point from the inside edge of the exit nozzle produces an increase in frequency response. The experimental results indicate that those parameters most significantly effecting frequency are in descending order of importance microphone location, vortex tube diameter, exit nozzle length, vortex tube length, and swirler diameter.

Goglia, Gene L.↗

Interaction Of A Helicopter Blade With A Vortex

Measurements in wind tunnel yield data for validation of computations. Report describes experimental investigation of three-dimensional interaction of helicopter rotor blade with vortex like that generated by preceeding rotor blade. Provides theoretical aerodynamicists with data for validation of computer simulations of aerodynamic flow.

Dunagan, Stephen↗

Turbulence modeling for impinging jet flows

The objective of the present work is to improve the accuracy of the k-epsilon turbulence model for flows involving one or more jets impinging on a plate in a crossflow which generate a horseshoe vortex. The k-epsilon model is modified by adding source terms to the epsilon equation, which enables it to more accurately predict the shear stress in flows subject to streamline curvature and vortex stretching (or lateral divergence). Calculations with the modified model predict the ground vortex core to be about 15 percent upstream of its experimental location. This is a significant improvement over the standard model which yields higher errors for calculation of the vortex-core location.

Childs, Robert E.↗

Microphysical Modelling of Polar Stratospheric Clouds During the 1999-2000 Winter

The evolution of the 1999-2000 Arctic winter has been examined using a microphysical/photochemical model run along diabatic trajectories. A large number of trajectories have been generated, filling the vortex throughout the region of polar stratospheric cloud (PSC) formation, and extending from November until the vortex breakup, in order to provide representative sampling of the evolution of PSCs and their effect on stratospheric chemistry. The 1999-2000 winter was particularly cold, allowing extensive PSC formation. Many trajectories have ten-day periods continuously below the Type I PSC threshold; significant periods of Type II PSCs are also indicated. The model has been used to test the extent and severity of denitrification and dehydration predicted using a range of different microphysical schemes. Scenarios in which freezing only occurs below the ice frost point (causing explicit coupling of denitrification and dehydration) have been tested, as well as scenarios with partial freezing at warmer temperatures (in which denitrification can occur independently of dehydration). The sensitivity to parameters such as aerosol freezing rates and heterogeneous freezing have been explored. Several scenarios cause sufficient denitrification to affect chlorine partitioning, and in turn, model-predicted ozone depletion, demonstrating that an improved understanding of the microphysics responsible for denitrification is necessary for understanding ozone loss rates.

Drdla, Katja↗

Analytical Assessment of Simultaneous Parallel Approach Feasibility from Total System Error

In a simultaneous paired approach to closely-spaced parallel runways, a pair of aircraft flies in close proximity on parallel approach paths. The aircraft pair must maintain a longitudinal separation within a range that avoids wake encounters and, if one of the aircraft blunders, avoids collision. Wake avoidance defines the rear gate of the longitudinal separation. The lead aircraft generates a wake vortex that, with the aid of crosswinds, can travel laterally onto the path of the trail aircraft. As runway separation decreases, the wake has less distance to traverse to reach the path of the trail aircraft. The total system error of each aircraft further reduces this distance. The total system error is often modeled as a probability distribution function. Therefore, Monte-Carlo simulations are a favored tool for assessing a "safe" rear-gate. However, safety for paired approaches typically requires that a catastrophic wake encounter be a rare one-in-a-billion event during normal operation. Using a Monte-Carlo simulation to assert this event rarity with confidence requires a massive number of runs. Such large runs do not lend themselves to rapid turn-around during the early stages of investigation when the goal is to eliminate the infeasible regions of the solution space and to perform trades among the independent variables in the operational concept. One can employ statistical analysis using simplified models more efficiently to narrow the solution space and identify promising trades for more in-depth investigation using Monte-Carlo simulations. These simple, analytical models not only have to address the uncertainty of the total system error but also the uncertainty in navigation sources used to alert an abort of the procedure. This paper presents a method for integrating total system error, procedure abort rates, avionics failures, and surveillance errors into a statistical analysis that identifies the likely feasible runway separations for simultaneous paired approaches.

Madden, Michael M.↗

A Piezoelectric Shear Stress Sensor

In this paper, a piezoelectric sensor with a floating element was developed for shear stress measurement. The piezoelectric sensor was designed to detect the pure shear stress suppressing effects of normal stress generated from the vortex lift-up by applying opposite poling vectors to the: piezoelectric elements. The sensor was first calibrated in the lab by applying shear forces and it showed high sensitivity to shear stress (=91.3 +/- 2.1 pC/Pa) due to the high piezoelectric coefficients of PMN-33%PT (d31=-1330 pC/N). The sensor also showed almost no sensitivity to normal stress (less than 1.2 pC/Pa) because of the electromechanical symmetry of the device. The usable frequency range of the sensor is 0-800 Hz. Keywords: Piezoelectric sensor, shear stress, floating element, electromechanical symmetry

Kim, Taeyang↗

Aeroacoustic Analysis using Dynamic Mode Decomposition of Unsteady Pressure-Sensitive Paint Measurements

In this paper, we present a new method for the diagnosis and analysis of aeroacoustic phenomena. Taking advantage of the well-known property that the measurements of the Unsteady Pressure-Sensitive Paint (uPSP) have much higher spatial resolution compared to those of the conventional pressure transducers, the method is based on the visualization and analysis of the outputs of the Dynamic Mode Decomposition (DMD) of the uPSP measurements. The uPSP measurements were collected with four Phantom high-speed cameras in the Ascent Transient Aerodynamics Test (ATAT) of the Space Launch System (SLS) Block 1 cargo vehicle in the 11-by-11-foot transonic test section of the Unitary Plan Wind Tunnel (UPWT) at NASA Ames Research Center in September 2019. The method presented in this paper is demonstrated by investigating an interesting phenomenon observed in the SLS ATAT – the vortex shedding tone generated by the forward attachment of the Solid Rocket Booster (SRB). As examples, the DMD outputs of the uPSP measurements in a subsonic test in the SLS ATAT are presented. It is shown the information retrieved from the DMD outputs of the uPSP measurements can be effectively used in the identification and diagnosis of the aeroacoustic phenomena. The work described in this paper is a part of NASA’s development of a new state-of-the-art uPSP capability in production wind tunnels. Funding was provided by the NASA Aerosciences Evaluation and Test Capabilities Portfolio Office.

acoustics↗

Aeroacoustic Analysis using Dynamic Mode Decomposition of Unsteady Pressure-Sensitive Paint Measurements

In this paper, we present a new method for the diagnosis and analysis of aeroacoustic phenomena. Taking advantage of the well-known property that the measurements of the Unsteady Pressure-Sensitive Paint (uPSP) have much higher spatial resolution compared to those of the conventional pressure transducers, the method is based on the visualization and analysis of the outputs of the Dynamic Mode Decomposition (DMD) of the uPSP measurements. The uPSP measurements were collected with four Phantom high-speed cameras in the Ascent Transient Aerodynamics Test (ATAT) of the Space Launch System (SLS) Block 1 cargo vehicle in the 11-by-11-foot transonic test section of the Unitary Plan Wind Tunnel (UPWT) at NASA Ames Research Center in September 2019. The method presented in this paper is demonstrated by investigating an interesting phenomenon observed in the SLS ATAT – the vortex shedding tone generated by the forward attachment of the Solid Rocket Booster (SRB). As examples, the DMD outputs of the uPSP measurements in a subsonic test in the SLS ATAT are presented. It is shown the information retrieved from the DMD outputs of the uPSP measurements can be effectively used in the identification and diagnosis of the aeroacoustic phenomena. The work described in this paper is a part of NASA’s development of a new state-of-the-art uPSP capability in production wind tunnels. Funding was provided by the NASA Aerosciences Evaluation and Test Capabilities Portfolio Office.

acoustics↗

Vortex Beam Sidelobe Suppression via Bayliss Synthesis from a Rectangular Phased Array

We demonstrate the application of the Bayliss synthesis method for suppression of sidelobes in an OAM vortex beam, when generated by a commercial-of-the-shelf, rectangular phased array. The method is optimized for the current application and simulated for a 26.5 GHz signal in CST Microwave Studio. Sidelobes are notably reduced by 16.9 dB, with minimal reduction in gain and increase in beamwidth, as compared to a uniformed stimulated phased array. Further, the OAM modes are found to have greater purity that that of the uniformly stimulated array, as well as for other amplitude tapering methods. The Bayliss synthesis is then applied to a phased array in a test range, verifying the simulation results that demonstrate sidelobe suppression. These results indicate that OAM may be applied to existing phased arrays with minimal effort.

Orbital Angular Momentum (OAM)↗

Vortex Beam Sidelobe Suppression via Bayliss Synthesis from a Rectangular Phased Array

We demonstrate the application of the Bayliss synthesis method for suppression of sidelobes in an OAM vortex beam, when generated by a commercial-of-the-shelf, rectangular phased array. The method is optimized for the current application and simulated for a 26.5 GHz signal in CST Microwave Studio. Sidelobes are notably reduced by 16.9 dB, with minimal reduction in gain and increase in beamwidth, as compared to a uniformed stimulated phased array. Further, the OAM modes are found to have greater purity that that of the uniformly stimulated array, as well as for other amplitude tapering methods. The Bayliss synthesis is then applied to a phased array in a test range, verifying the simulation results that demonstrate sidelobe suppression. These results indicate that OAM may be applied to existing phased arrays with minimal effort.

Orbital Angular Momentum (OAM)↗

Flow visualization of vortices locked by spanwise blowing over wings featuring a unique leading and trailing-edge flap system

Flow visualization studies were conducted to qualitatively determine the effects of active generation and augmentation of vortex flow over wings by blowing a discrete jet in a spanwise direction in the channel formed by extension of upper surface leading- and trailing-edge flaps. Spanwise blowing from a reflection plane over a rectangular wing was found to generate and lock a dual corotating vortex system within the channel and, at sufficient blowing rates, cause the separated flow off the upper end of the leading-edge flap to reattach to the trailing-edge flap. Test parameters included wing angle of attack, jet momentum coefficient, leading- and trailing-edge flap deflection angle, and jet location above the wing surface. Effects due to removal of the leading- and trailing-edge flap were also investigated.

Erickson, G. E.↗

Identification of vortex-induced clear-air turbulence using airline flight records

The nature and cause of clear-air turbulence is being investigated, in cooperation with the National Transportation Safety Board, using the flight records available from airline encounters with severe turbulence. This paper presents two case studies of severe turbulence which indicate that the airplanes involved encountered vortex arrays which were generated by destabilized wind-shear layers near the tropopause. In order to identify and analyze vortex patterns (i.e., vortex strength, size, and spacings), potential-flow models of vortex arrays were developed that describe reasonably well the wind patterns derived from the airliner flight records. The results of this analysis indicate that in the two cases studied, the vortex cores had diameters in the range of 900 to 1,200 ft with tangential velocities in the range of 70 to 85 ft/sec. This study presents the first identification and analysis of vortex arrays from airline flight data. The results are compared with theoretical predictions and previous observations.

Parks, E. K.↗

Three-dimensional simulation of the free shear layer using the vortex-in-cell method

We present numerical simulations of the evolution of a mixing layer from an initial state of uniform vorticity with simple two- and three-dimensional small perturbations. A new method for tracing a large number of three-dimensional vortex filaments is used in the simulations. Vortex tracing by Biot-Savart interaction originally implied ideal (non-viscous) flow, but we use a 3-d mesh, Fourier transforms and filtering for vortex tracing, which implies 'modeling' of subgrid scale motion and hence some viscosity. Streamwise perturbations lead to the usual roll-up of vortex patterns with spanwise uniformity maintained. Remarkably, spanwise perturbations generate streamwise distortions of the vortex filaments and the combination of both perturbations leads to patterns with interesting features discernable in the movies and in the records of enstrophy and energy for the three components of the flow.

Couet, B.↗

Flight test investigation of the vortex wake characteristics behind a Boeing 727 during two-segment and normal ILS approaches (A joint NASA/FAA report)

Flight tests were performed to evaluate the vortex wake characteristics of a Boeing 727 aircraft during conventional and two-segment instrument landing approaches. Smoke generators were used for vortex marking. The vortex was intentionally intercepted by a Lear Jet and a Piper Comanche aircraft. The vortex location during landing approach was measured using a system of phototheodolites. The tests showed that at a given separation distance there are no readily apparent differences in the upsets resulting from deliberate vortex encounters during the two types of approaches. The effect of the aircraft configuration on the extent and severity of the vortices is discussed.

Barber, M. R.↗

Spectral Characteristics of Wake Vortex Sound During Roll-Up

This report presents an analysis of the sound spectra generated by a trailing aircraft vortex during its rolling-up process. The study demonstrates that a rolling-up vortex could produce low frequency (less than 100 Hz) sound with very high intensity (60 dB above threshold of human hearing) at a distance of 200 ft from the vortex core. The spectrum then drops o rapidly thereafter. A rigorous analytical approach has been adopted in this report to derive the spectrum of vortex sound. First, the sound pressure was solved from an alternative treatment of the Lighthill s acoustic analogy approach [1]. After the application of Green s function for free space, a tensor analysis was applied to permit the removal of the source term singularity of the wave equation in the far field. Consequently, the sound pressure is expressed in terms of the retarded time that indicates the time history and spacial distribution of the sound source. The Fourier transformation is then applied to the sound pressure to compute its spectrum. As a result, the Fourier transformation greatly simplifies the expression of the vortex sound pressure involving the retarded time, so that the numerical computation is applicable with ease for axisymmetric line vortices during the rolling-up process. The vortex model assumes that the vortex circulation is proportional to the time and the core radius is a constant. In addition, the velocity profile is assumed to be self-similar along the aircraft flight path, so that a benchmark vortex velocity profile can be devised to obtain a closed form solution, which is then used to validate the numerical calculations for other more realistic vortex profiles for which no closed form solutions are available. The study suggests that acoustic sensors operating at low frequency band could be profitably deployed for detecting the vortex sound during the rolling-up process.

Booth, Earl R., Jr.↗

High Order Difference Method for Low Mach Number Aeroacoustics

A high order finite difference method with improved accuracy and stability properties for computational aeroacoustics (CAA) at low Mach numbers is proposed. The Euler equations are split into a conservative and a symmetric non- conservative portion to allow the derivation of a generalized energy estimate. Since the symmetrization is based on entropy variables, that splitting of the flux derivatives is referred to as entropy splitting. Its discretization by high order central differences was found to need less numerical dissipation than conventional conservative schemes. Owing to the large disparity of acoustic and stagnation quantities in low Mach number aeroacoustics, the split Euler equations are formulated in perturbation form. The unknowns are the small changes of the conservative variables with respect to their large stagnation values. All nonlinearities and the conservation form of the conservative portion of the split flux derivatives can be retained, while cancellation errors are avoided with its discretization opposed to the conventional conservative form. The finite difference method is third-order accurate at the boundary and the conventional central sixth-order accurate stencil in the interior. The difference operator satisfies the summation by parts property analogous to the integration by parts in the continuous energy estimate. Thus, strict stability of the difference method follows automatically. Spurious high frequency oscillations are suppressed by a characteristic-based filter similar to but without limiter. The time derivative is approximated by a 4-stage low-storage second-order explicit Runge-Kutta method. The method has been applied to simulate vortex sound at low Mach numbers. We consider the Kirchhoff vortex, which is an elliptical patch of constant vorticity rotating with constant angular frequency in irrotational flow. The acoustic pressure generated by the Kirchhoff vortex is governed by the 2D Helmholtz equation, which can be solved analytically using separation of variables.

Mueller, B.↗