Search NASA⌕ Search

SEARCH · Search NASA

Results for “ablators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Langmuir probe characterization of laser ablation plasmas

For laser ablation plumes that are significantly ionized, Langmuir probes have proved to be a useful tool for measuring the plume shape, ion energy distribution, and electron temperature. Typically in laser ablation plasmas the flow velocity is supersonic, which complicates the interpretation of the current-voltage probe characteristic. In this paper we describe some recent developments on the application of Langmuir probes for laser ablation plume diagnosis. We have investigated the behavior of the probe when it is orientated perpendicular, and parallel, to the plasma flow, and show how an analytical model developed for plasma immersion ion implantation, can quantitatively describe the variation of the ion current with probe bias for the case when the plasma flow is along the probe surface. The ion signal recorded by a probe in the parallel position is proportional to the ion density and the square root of the bias voltage. It is shown that the current varies as m{sub i}{sup -1/2} so that by comparing the ion signals from the parallel and perpendicular positions it is possible to estimate the mass of the ions detected. We have also determined the temporal variation of electron temperature. A planar probe oriented parallel to the plasma flow, where the ion current due to the plasma flow is eliminated, gives a more reliable measurement of T{sub e} (<0.6 eV). The measured T{sub e} is consistent with the measured ion current, which is dependent on T{sub e} when the time taken for an element of plasma to traverse the probe is longer than the time taken for the matrix ion sheath extraction phase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ultraviolet laser ablation of polycarbonate and glass in air

The fundamental physical processes that follow ultraviolet laser ablation of polycarbonate and borosilicate glass in air have been investigated using photodeflection as a function of the distance from the surface to probe laser. Four features were observed in the data sets for each material. Two of these features correlate well with gas dynamical predictions for the expansion of the shock wave and gas plume. The third feature is consistent with the propagation of the popping sound of the laser ablation event. The final feature, which occurs at very early times and does not shift significantly in time as the surface to probe distance is increased from 0 to greater than 6 mm, has been tentatively ascribed to the ejection of fast electrons. The final significant observation is complete blocking of the probe laser, only observed during borosilicate ablation, which is attributed to scattering of the probe laser light by macroscopic SiO{sub x} particles that grow in the final stages of plume expansion and cooling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantitative Analysis of Plasma Ablation Using Inverse Wire Array Z-pinches

An inverse (exploding) wire array configuration, in which the wires form a cylinder around a current carrying electrode on axis, was used to study the ablation phase of the pinch. This configuration allows the parameters of the plasma from individual wires of the array to be measured as the ablated plasma streams propagate in the outward radial direction. The density distribution and the evolution of the natural mode of modulation of the ablation was measured with interferometry and soft x-ray imaging. Measurements of the voltage across the array, which in this configuration is determined by the private magnetic flux around the individual wires, allows information on the localisation of the current to be obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mechanisms of the laser plume expansion during the ablation of LiMn{sub 2}O{sub 4}

Films of LiMn{sub 2}O{sub 4} prepared by pulsed laser ablation deposition are typically lithium deficient when grown at background pressures ranging between 10{sup -4} and 20 Pa. The deficiency of light atomic species such as lithium in LiMn{sub 2}O{sub 4} thin films occurs as a result of the different behavior of the species during plume expansion and the deposition of the film at elevated deposition temperatures. The plasma plume evolution in vacuum and 20 Pa oxygen pressure are studied using two spectroscopic techniques: emission spectroscopy and plume imaging. Higher velocities and a wider spatial distribution of lithium atoms are observed in vacuum when compared with manganese and oxygen species. Plume species are slowed down due to collisions with gas molecules when ablating LiMn{sub 2}O{sub 4} in an oxygen atmosphere. As a result, a strong deceleration of the plasma front occurs, and the effect is more pronounced for the light species, e.g., Li. Comparing the spatial manganese and lithium distribution within the plasma, the lithium species are again scattered into a wider angular range. These similar spatial distributions of Li atoms detected in the pressure range between 10{sup -4} and 20 Pa suggest that it is not possible to achieve a congruent lithium transfer to a growing film if the target contains heavier elements besides lithium. The general implications for the ablation of materials containing a combination of light and heavy elements are that as-grown films are inherently deficient with respect to the content of the light elements. If the mass ratio between the light and the heavy elements is not too different, is should be possible to find a set of deposition parameters which will result in the growth of a film with the desired composition.

36 MATERIALS SCIENCE↗

Theoretical Modeling of Femtosecond Pulsed Laser Ablation of Silicon

Femtosecond (fs) laser ablation yield of semiconductors critically depends on pulse shape in time and space domain, laser wavelength and fluence. We have carried out a theoretical study of fs-pulsed laser interaction with silicon to optimize the ablation process using two-temperature model for laser pulse ({lambda} = 800 nm), which is rectangular in time domain pulse (width = 100 fs) and uniform intensity in circular cross-section of 100 {mu}m diameter. We have calculated ablation threshold, depth of material removal per pulse and refractive index change of silicon after irradiated by laser pulse and compared with the available experimental results. The formation of fs-laser induced periodic sub-wavelength surface grating structures on the silicon is also discussed within the frame work of carrier induced nonlinear effect.

36 MATERIALS SCIENCE↗

Evolution and imaging of nanoparticles observed in laser ablated carbon plume

We report evidence of nanoparticles formation in laser ablated carbon plasma created by irradiating a graphite target with nanosecond neodymium doped yttrium aluminum garnet laser. The temporal evolution and spatial distribution of C{sub 2} molecules in the plasma is studied using optical emission spectroscopy, dynamic imaging and laser induced fluorescence techniques. The laser induced fluorescence spectrum and imaging of C{sub 2} fluorescence corresponding to transition d {sup 3}PI{sub g}-a {sup 3}PI{sub u} (0, 1) (lambda=563.5 nm) is investigated by probing the expanding plume using a dye laser. The temporal evolution of ground state number density of C{sub 2} shows density varying from 2.6x10{sup 20}/m{sup 3} to 1.2x10{sup 22}/m{sup 3} on varying delay between the ablating and probe pulse from 200 to 600 ns. A peculiar bifurcation of carbon plume into two parts at approx270 ns after the formation of plasma is attributed to recombination of carbon species and formation of nanoparticles. This study may help in quantitatively understanding of formation of carbon molecular species and the nanoparticles produced in laser ablated carbon plume.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Azimuthally correlated ablation between z-pinch wire cores

Azimuthally correlated wire core ablation was compared for closely spaced versus widely spaced wires in a 1 MA Z-pinch. X-ray point-projection diagnostics revealed that 240 {mu}m spaced wires exhibited a correlation coefficient approaching unity in both real space and in k-space. This correlated ablation between wires at a fixed axial location is believed to occur due to an enhanced, localized Joule heating. Wires separated by 2.47 mm or greater were uncorrelated in real space, but correlated in k-space, indicating the ablation structure between wires was shifted in phase.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Improved model for the angular dependence of excimer laser ablation rates in polymer materials

Measurements of the angle-dependent ablation rates of polymers that have applications in microdevice fabrication are reported. A simple model based on Beer's law, including plume absorption, is shown to give good agreement with the experimental findings for polycarbonate and SU8, ablated using the 193 and 248 nm excimer lasers, respectively. The modeling forms a useful tool for designing masks needed to fabricate complex surface relief by ablation.

36 MATERIALS SCIENCE↗

Structuring by field enhancement of glass, Ag, Au, and Co thin films using short pulse laser ablation

Single pulse laser ablation of glass, Ag, Au, and Co thin films was experimentally investigated with a laser pulse width of 400 ps at a wavelength of 532 nm both in the far and near fields. In the far-field regime, the electromagnetic field results from a focused laser beam, while the near-field regime is realized by a combination of the focused laser beam incident on a spherical colloidal particle. For the near-field experiments we have used polystyrene colloidal particles of 700 nm diameter self-assembled or spin coated on top of the surfaces. Laser fluences applied are in the range of 0.01-10 J/cm{sup 2}. The diameter and the morphologies of the ablated holes were investigated by optical microscopy, profilometry, scanning electron microscopy, and atomic force microscopy. The dependence of the shape of the holes reflects the fluence regime and the thermophysical properties, i.e., melting temperature and thermal diffusivity of the surfaces involved in the experiments. We give quantitative data about the fluence threshold, diameter, and depth ablation dependence for the far and near fields and discuss their values with respect to the enhancement factor of the intensity of the electromagnetic field due to the use of the colloidal particles. Theoretical estimations of the intensity enhancement were done using the finite-difference time-domain method by using the RSOFT software. The application of near fields allows structuring of the surfaces with structure dimension in the order of 100 nm and even below.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Study of laser-plasma interaction using a physics-based model for understanding the physical mechanism of double-pulse effect in nanosecond laser ablation

This paper studies the double-pulse effect in high-intensity ({>=}{approx}GW/cm{sup 2}) nanosecond (ns) laser ablation, which refers to the significant material removal rate enhancement for ablation by two ns laser pulses (often separated by a delay time of {approx}10 to 100 ns). The early-stage interaction of the second laser pulse with the plasma plume created by the first pulse is very important for understanding the physical mechanism of the double pulse effect. However, the plasma properties in the early stage (during a laser pulse or within 20 to 30 ns after the completion of the pulse) are very difficult to measure experimentally. In this letter, a physics-based predictive model is used as the investigation tool, which was previously verified based on experiments on plasma properties in the late stage, which are relatively easy to measure. The study shows that the second laser pulse does not directly strike the target condensed phase. Instead, it mainly interacts with the plasma plume created by the first laser pulse, heats and accelerates the ablated material in the plume lingering above the target surface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bow shocks in ablated plasma streams for nested wire array z-pinches: A laboratory astrophysics testbed for radiatively cooled shocks

Astrophysical observations have demonstrated many examples of bow shocks, for example, the head of protostellar jets or supernova remnants passing through the interstellar medium or between discrete clumps in jets. For such systems where supersonic and super-Alfvenic flows and radiative cooling are all important, carefully scaled laboratory experiments can add insight into the physical processes involved. The early stage of a wire array z-pinch implosion consists of the steady ablation of material from fine metallic wires. Ablated material is accelerated toward the array axis by the JxB force. This flow is highly supersonic (M>5) and becomes super-Alfvenic (M{sub A}>2). Radiative cooling is significant in this flow and can be controlled by varying the material in the ablated plasma. The introduction of wires as obstructions in this steady flow leads to the formation of bow shocks, which can be used as a laboratory testbed for astrophysical bow shocks. The magnetic field associated with this obstruction wire can be controlled by varying the current through it. Differences in the shock for different cooling rates and different magnetic fields associated with the obstruction will be discussed, along with comparisons of dimensionless parameters in the experiments to astrophysical systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Models For Laser Ablation Mass Removal And Impulse Generation In Vacuum

To the present day, literature efforts at modeling laser propulsion impulse often used empirical models. Recently, a simple physical approach was demonstrated to be effective for predicting many practical properties of laser ablative impulse generation under vacuum. The model used photochemical mass removal and energy conservation to predict parameters such as the peak momentum coupling coefficient, the optimal fluence position at which this maximum is reached, and various critical properties related to the laser ablation threshold. Although the current model understanding is not complete, improvements in the treatment of mass removal and ambient pressure are expected to allow this type of model to be broadly applicable to many diverse applications using laser ablation impulse generation. In this paper, we also introduce an alternative formulation of the model incorporating photothermal mass removal. Implications and limitations of the model formulation in its initial stage of development are discussed, particularly concerning critical fluence effects and directions for improvement.

42 ENGINEERING↗

Critical Fluences And Modeling Of CO{sub 2} Laser Ablation Of Polyoxymethylene From Vaporization To The Plasma Regime

A CO{sub 2} laser was operated at pulse energies up to 10 J to ablate polyoxymethylene targets in air and vacuum conditions. Critical effects predicted by ablation models are discussed in relation to the experimental data, including specifically the threshold fluences for vaporization and critical plasma formation, and the fluence at which the optimal momentum coupling coefficient is found. Finally, we discuss a new approach for modeling polymers at long wavelengths, including a connection formula that links the vaporization and plasma regimes for laser ablation propulsion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimization of La{sub 0.7}Ba{sub 0.3}MnO{sub 3-{delta}} complex oxide laser ablation conditions by plume imaging and optical emission spectroscopy

The properties of thin films of complex oxides, such as La{sub 1-x}D{sub x}MnO{sub 3-{delta}} (D=Ba, Ca, Sr, etc.), produced by pulsed laser deposition depend critically on the experimental parameters in which laser ablation is carried out. Here, we report a comparative analysis of the pulsed laser ablation process of La{sub 0.7}Ba{sub 0.3}MnO{sub 3-{delta}}, in oxygen background, in the ambient pressure range from 10{sup -2} to 1 mbar, typically employed in pulsed laser deposition of manganites. The laser ablation plume was studied by using time-gated imaging and optical emission spectroscopy techniques. It was found that at a pressure of {approx_equal}10{sup -2} mbar, the plume species arriving at the substrate are characterized by hyperthermal kinetic energy ({approx_equal}10 eV), and high degree of excitation. On the contrary, at larger oxygen pressure (0.1-1 mbar), the velocity of plume species reaching the substrate, and their degree of excitation are much reduced by the confining effects of the background gas. These features explain why an appropriate choice of the experimental conditions in which the deposition process is carried out leads to better quality films, providing helpful indications to improve control over the growth process of both La{sub 1-x}D{sub x}MnO{sub 3-{delta}} and other perovskitic oxides.

36 MATERIALS SCIENCE↗

Numerical study of the ablative Richtmyer-Meshkov instability of laser-irradiated deuterium and deuterium-tritium targets

The Richtmyer-Meshkov instability (RMI) at the ablation front of laser-irradiated planar targets is investigated by two-dimensional numerical hydrodynamics simulations. The linear evolution of perturbations seeded either by surface roughness or target inhomogeneity is studied for perturbation wavelengths in the range 10{<=}{lambda}{<=}400 {mu}m and laser intensity 4x10{sup 12{<=}}I{<=}4x10{sup 14} W/cm{sup 2} (with laser wavelength {lambda}{sub laser}=0.35 {mu}m). Thin and thick cryogenic deuterium or deuterium-tritium (DT) planar targets are considered. For targets irradiated at constant intensity, it is found that perturbations with wavelength below a given threshold perform damped oscillations, while perturbations above such a threshold are unstable and oscillate with growing amplitude. This is qualitatively in agreement with theoretical predictions by Goncharov et al. [Phys. Plasmas 13, 012702 (2006)], according to which ablation related processes stabilize perturbations with kD{sub c}>>1, where D{sub c} is the distance between the ablation front and critical density for laser propagation. For kD{sub c}<1 a weakly growing Landau-Darrieus instability (LDI) is instead excited. The stability threshold increases substantially with laser intensity, given the dependence of D{sub c} on laser intensity I (roughly D{sub c{proportional_to}}I, according to the present simulations). Direct-drive laser fusion targets are irradiated by time-shaped pulses, with a low intensity initial foot. In this case, perturbations with wavelengths below some threshold (about 10 {mu}m, for typical ignition-class all-DT targets) are damped after an initial growth. In a thin target, initial perturbations, either damped or amplified by RMI and LDI, seed the subsequent Rayleigh-Taylor instability. Finally, it is shown that RMI growth of fusion targets can be reduced by using laser pulses including an initial adiabat-shaping picket (originally proposed to reduce the growth of Rayleigh-Taylor instability).

36 MATERIALS SCIENCE↗

Simulation of Double-Pulse Laser Ablation

We investigate the physical reasons of a strange decrease in the ablation depth observed in femtosecond double-pulse experiments with increasing delay between the pulses. Two ultrashort pulses of the same energy produce the crater which is less than that created by a single pulse. Hydrodynamic simulation shows that the ablation mechanism is suppressed when the delay between the pulses exceeds the electron-ion relaxation time. In this case, the interaction of the second laser pulse with the expanding target material leads to the formation of the second shock wave suppressing the rarefaction wave created by the first pulse. The modeling of the double-pulse ablation for different delays between pulses confirms this explanation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Linear stability analysis of double ablation fronts in direct-drive inertial confinement fusion

A linear stability theory of double ablation fronts is developed for direct-drive inertial confinement fusion targets. The so-called electron radiative ablation front [S. Fujioka et al., Phys. Rev. Lett. 92, 195001 (2004)] is studied with a self-consistent model. Numerical results are presented as well as an analytical approach for the radiation dominated regime of very steep double ablation front structure. Dispersion relation formula is tackled by means of a sharp boundary model.

36 MATERIALS SCIENCE↗

Synthesis of higher diamondoids by pulsed laser ablation plasmas in supercritical CO{sub 2}

Pulsed laser ablation (wavelength 532 nm; fluence 18 J/cm{sup 2}; pulse width 7 ns; repetition rate 10 Hz) of highly oriented pyrolytic graphite was conducted in adamantane-dissolved supercritical CO{sub 2} with and without cyclohexane as a cosolvent. Micro-Raman spectroscopy of the products revealed the presence of hydrocarbons possessing sp{sup 3}-hybridized carbons similar to diamond structures. The synthesis of diamantane and other possible diamondoids consisting of up to 12 cages was confirmed by gas chromatography-mass spectrometry. Furthermore, gas chromatography-mass spectrometry measurements of samples before and after pyrolysis treatment indicate the synthesis of the most compact decamantane, namely, superadamantane. It is thought that oxidant species originating from CO{sub 2} during pulsed laser ablation might lead to the selective dissociation of C-H bonds, enabling the synthesis of low H/C ratio molecules. Therefore, laser ablation in supercritical CO{sub 2} is proposed as a practical method for synthesizing diamondoids.

36 MATERIALS SCIENCE↗