Search NASA⌕ Search

SEARCH · Search NASA

Results for “angular distribution model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Imaging systematics induced by galaxy subsample fluctuation: New systematics at second order

Imaging systematics refers to the inhomogeneous distribution of a galaxy sample caused by varying observing conditions and astrophysical foregrounds. Current mitigation methods correct the galaxy density fluctuations $n$ gal /$\bar{n}$ gal caused by imaging systematics assuming that all galaxies in a sample have the same $n$ gal /$\bar{n}$ gal . Under this assumption, the corrected sample cannot perfectly recover the true correlation function. Here, we name this effect subsample systematics. For a galaxy sample, even if its overall sample statistics [redshift distribution 𝑛⁡(𝑧), galaxy bias 𝑏⁡(𝑧)], are accurately measured, 𝑛⁡(𝑧), 𝑏⁡(𝑧) can still vary across the observed footprint. It makes the correlation function amplitude of galaxy clustering higher, while correlation functions for galaxy-galaxy lensing and cosmic shear do not have noticeable change. Such a combination could potentially degenerate with physical signals on small angular scales, such as the amplitude of galaxy clustering, the impact of neutrino mass on the matter power spectrum, etc. subsample systematics cannot be corrected using imaging systematics mitigation approaches that rely on the cross-correlation signal between imaging systematics maps and the observed galaxy density field. In this paper, we derive formulated expressions of subsample systematics, demonstrating its fundamental difference with other imaging systematics. We also provide several toy models to visualize this effect. Finally, we discuss a potential method to estimate and mitigate subsample systematics by forward modeling its behavior using synthetic source injection.

Kong, Hui [The Barcelona Institute of Science and ↗
NASA NTRS1976

An evaluation of the method for determining the Whitham F-function using distributions of downwash and sidewash angles

The method of computing the Whitham F function using distributions of downwash and sidewash angles was evaluated with two different models. F functions which were calculated for a half angle cone cylinder at M infinites = 2.01, using theoretically and experimentally derived flow angles, show that the method is sensitive to small inaccuracies in the measured flow angles. An oblique wing transport model was tested at 0 deg angle of attack at M infinitely = 2.01. In this test, two different probes were used at two different distances from the model. The pressure signature derived from the F function was extrapolated and compared to the pressure signature measured at the distance of 0.87 body lengths with the static pressure probe. The agreement between the two pressure signatures was poor due to the many inaccuracies involved in using a probe designed to measure flow angularity.

Mendoza, J. P.↗
NASA NTRS1995

Investigation of wing upper surface flow-field disturbance due to NASA DC-8-72 in-flight inboard thrust-reverser deployment

An investigation of the wing upper surface flow-field disturbance due to in-flight inboard thrust reverser deployment on the NASA DC-8-72, which was conducted cooperatively by NASA Ames, the Federal Aviation Administration (FAA), McDonnell Douglas, and the Aerospace Industry Association (AIA), is outlined and discussed in detail. The purpose of this flight test was to obtain tufted flow visualization data which demonstrates the effect of thrust reverser deployment on the wing upper surface flow field to determine if the disturbed flow regions could be modeled by computational methods. A total of six symmetric thrust reversals of the two inboard engines were performed to monitor tuft and flow cone patterns as well as the character of their movement at the nominal Mach numbers of 0.55, 0.70, and 0.85. The tufts and flow cones were photographed and video-taped to determine the type of flow field that occurs with and without the thrust reversers deployed. In addition, the normal NASA DC-8 onboard Data Acquisition Distribution System (DADS) was used to synchronize the cameras. Results of this flight test will be presented in two parts. First, three distinct flow patterns associated with the above Mach numbers were sketched from the motion videos and discussed in detail. Second, other relevant aircraft parameters, such as aircraft's angular orientation, altitude, Mach number, and vertical descent, are discussed. The flight test participants' comments were recorded on the videos and the interested reader is referred to the video supplement section of this report for that information.

Hamid, Hedayat U.↗
NASA NTRS2014

Inflation Physics from the Cosmic Microwave Background and Large Scale Structure

Fluctuations in the intensity and polarization of the cosmic microwave background (CMB) and the large-scale distribution of matter in the universe each contain clues about the nature of the earliest moments of time. The next generation of CMB and large-scale structure (LSS) experiments are poised to test the leading paradigm for these earliest moments-the theory of cosmic inflation-and to detect the imprints of the inflationary epoch, thereby dramatically increasing our understanding of fundamental physics and the early universe. A future CMB experiment with sufficient angular resolution and frequency coverage that surveys at least 1% of the sky to a depth of 1 uK-arcmin can deliver a constraint on the tensor-to-scalar ratio that will either result in a 5 sigma measurement of the energy scale of inflation or rule out all large-field inflation models, even in the presence of foregrounds and the gravitational lensing B-mode signal. LSS experiments, particularly spectroscopic surveys such as the Dark Energy Spectroscopic Instrument, will complement the CMB effort by improving current constraints on running of the spectral index by up to a factor of four, improving constraints on curvature by a factor of ten, and providing non-Gaussianity constraints that are competitive with the current CMB bounds.

theoretical paradigm↗
NASA NTRS2002

Dynamical Models of the Solar System Formation and Evolution

Mark Lewis has extended his them is work by completing a series of N-body simulations of a narrow ring that: is in the location of Saturn's F-ring and is perturbed by a single satellite comparable to Prometheus, but on a circular orbit. We had previously shown how the satellite perturbations can cause a broadly distributed sparse population of ring particles to become concentrated into narrow rings that can be maintained outside of any resonance location. For low optical depths, the collisions between ring particles are highly localized in the peaks of the satellite wakes. The inelastic collisions therefore occur at a particular orbital phase angle so as to damp the azimuthal component of the relative velocities. Since particle positions are not changed by collisions, the semimajor axes of the particles are shifted toward the actual particle positions where the collisions occur. Thus, negative radial diffusion can occur while conserving orbital angular momentum so long as the forced eccentricity is continually re-excited by the satellite. We speculated that the separation between the final ringlets was largely determined by the magnitude of the forced eccentricities induced by the satellite at closest approach. We carried out a series of simulations with a variety of different satellite masses in order to vary the magnitude of the forced eccentricity. We found that indeed the final spacing of the ringlets does increase with the magnitude of the forced eccentricity (Lewis and Stewart 2002). This occurs because neighboring eccentric ringlets drift out of phase with one another due to Keplerian shear and eventually collide with one another, leading to a smaller number of more widely spaced ringlets, The time scale required to form narrow ringlets in these simulations is much shorter than one would expect from standard theories based upon the orbit-averaged torque produced by multiple passes by the satellite. We find that the initial ringlets form in less than two synodic periods and the final state is typically reached in 10 to 20 synodic periods. These studies move us closer to understanding the significantly more complex system of Saturn's F ring, where the perturbation magnitude varies over short temporal and spatial time scales due to the orbital eccentricities of the perturbing satellite. We are currently extending the simulation to allow for an eccentric orbit of the satellite.

Stewart, Glen R.↗
NASA NTRS2000

Orbital Measurement and Verification of the Chandra X-Ray Observatory's PSF

The recently launched Chandra x-ray Observatory (CXO) was designed to have the sharpest angular resolution yet of any x-ray telescope. Detailed modeling and metrology of the optics followed by extensive testing at the X-ray Calibration Facility at the Marshall p Space Flight Center in Huntsville, Alabama, indicated that the optics were performing exceedingly well, within our ability to account for distortion of the mirrors due to gravity, and the effects of finite distance and size of the x-ray generator. Thus it was only on-orbit that we expected to directly observe the specified half arcsecond performance. We present here results of the on-orbit calibration of the point spread function (PSF), comparing it with our predictions. We discuss how the PSF varies with source location in the telescope field of view, as well as with the spectral energy distribution of the source.

Jerius, D.↗
NASA NTRS2008

An Analytical Model for the Prediction of a Micro-Dosimeter Response Function

A rapid analytical procedure for the prediction of a micro-dosimeter response function in low Earth orbit (LEO), correlated with the Space Transportation System (STS, shuttle) Tissue Equivalent Proportional Counter (TEPC) measurements is presented. The analytical model takes into consideration the energy loss straggling and chord length distribution of the detector, and is capable of predicting energy deposition fluctuations in a cylindrical micro-volume of arbitrary aspect ratio (height/diameter) by incoming ions through both direct and indirect (ray) events. At any designated (ray traced) target point within the vehicle, the model accepts the differential flux spectrum of Galactic Cosmic Rays (GCR) and/or trapped protons at LEO as input. On a desktop PC, the response function of TEPC for each ion in the GCR/trapped field is computed at the average rate of 30 seconds/ion. The ionizing radiation environment at LEO is represented by O'Neill fs GCR model (2004), covering charged particles in the 1 less than or equal to Z less than or equal to 28. O'Neill's free space GCR model is coupled with the Langley Research Center (LaRC) angular dependent geomagnetic cutoff model to compute the transmission coefficient in LEO. The trapped proton environment is represented by a LaRC developed time dependent procedure which couples the AP8MIN/AP8MAX, Deep River Neutron Monitor (DRNM) and F10.7 solar radio frequency measurements. The albedo neutron environment is represented by the extrapolation of the Atmospheric Ionizing Radiation (AIR) measurements. The charged particle transport calculations correlated with STS 51 and 114 flights are accomplished by using the most recent version (2005) of the LaRC deterministic High charge (Z) and Energy TRaNsport (HZETRN) code. We present the correlations between the TEPC model predictions (response function) and TEPC measured differential/integral spectra in the lineal energy (y) domain for both GCR and trapped protons, with the conclusion that the model correctly accounts for the increase in flux at low y values where energetic ions are the primary contributor. We further discuss that, even with the incorporation of angular dependency in the cutoffs, comparison of the GCR differential/integral flux between STS 51 and 114 TEPC measured data and current calculations indicates that there still exists an underestimation by the simulations at low to mid range y values. This underestimation is partly related the exclusion of the secondary pion particle production from the current version of HZETRN.

Badavi, Francis F.↗
NASA NTRS2010

James Webb Space Telescope Studies of Dark Energy

The Hubble Space Telescope (HST) has contributed significantly to studies of dark energy. It was used to find the first evidence of deceleration at z=1.8 (Riess et al. 2001) through the serendipitous discovery of a type 1a supernova (SN1a) in the Hubble Deep Field. The discovery of deceleration at z greater than 1 was confirmation that the apparent acceleration at low redshift (Riess et al. 1998; Perlmutter et al. 1999) was due to dark energy rather than observational or astrophysical effects such as systematic errors, evolution in the SN1a population or intergalactic dust. The GOODS project and associated follow-up discovered 21 SN1a, expanding on this result (Riess et al. 2007). HST has also been used to constrain cosmological parameters and dark energy through weak lensing measurements in the COSMOS survey (Massey et al 2007; Schrabback et al 2009) and strong gravitational lensing with measured time delays (Suyu et al 2010). Constraints on dark energy are often parameterized as the equation of state, w = P/p. For the cosmological constant model, w = -1 at all times; other models predict a change with time, sometimes parameterized generally as w(a) or approximated as w(sub 0)+(1-a)w(sub a), where a = (1+z)(sup -1) is the scale factor of the universe relative to its current scale. Dark energy can be constrained through several measurements. Standard candles, such as SN1a, provide a direct measurement of the luminosity distance as a function of redshift, which can be converted to H(z), the change in the Hubble constant with redshift. An analysis of weak lensing in a galaxy field can be used to derive the angular-diameter distance from the weak-lensing equation and to measure the power spectrum of dark-matter halos, which constrains the growth of structure in the Universe. Baryonic acoustic oscillations (BAO), imprinted on the distribution of matter at recombination, provide a standard rod for measuring the cosmological geometry. Strong gravitational lensing of a time-variable source gives the angular diameter distance through measured time delays of multiple images. Finally, the growth of structure can also be constrained by measuring the mass of the largest galaxy clusters over cosmic time. HST has contributed to the study of dark energy through SN1a and gravitational lensing, as discussed above. HST has also helped to characterize galaxy clusters and the HST-measured constraints on the current Hubble constant H(sub 0) are relevant to the interpretation of dark energy measurements (Riess et al 2009a). HST has not been used to constrain BAO as the large number of galaxy redshifts required, of order 100 million, is poorly matched to HST's capabilities. As the successor to HST, the James Webb Space Telescope (JWST; Gardner et al 2006) will continue and extend HST's dark energy work in several ways.

Gardner, Jonathan P.↗
NASA NTRS2016

Impacts of the Angular Dependence of the Solar Diffuser BRDF Degradation Factor on the SNPP VIIRS Reflective Solar Band On-Orbit Radiometric Calibration

Using an onboard sunlit solar diffuser (SD) as the primary radiance source, the visible infrared imaging radiometer suite (VIIRS) on the Suomi National Polar-orbiting Partnership satellite regularly performs radiometric calibration of its reflective solar bands (RSBs). The SD bidirectional reflectance distribution function (BRDF) value decreases over time. A numerical degradation factor is used to quantify the degradation and is determined by an onboard SD stability monitor (SDSM), which observes the sun and the sunlit SD at almost the same time. We had shown previously that the BRDF degradation factor was angle-dependent. Consequently, due to that the SDSM and the RSB view the SD at very different angles relative to both the solar and the SD surface normal vectors, directly applying the BRDF degradation factor determined by the SDSM to the VIIRS RSB calibration can result in large systematic errors. We develop a phenomenological model to calculate the BRDF degradation factor for the RSB SD view from the degradation factor for the SDSM SD view. Using the yearly undulations observed in the VIIRS detector gains for the M1-M4 bands calculated with the SD BRDF degradation factor for the SDSM SD view and the difference between the VIIRS detector gains calculated from the SD and the lunar observations, we obtain the model parameter values and thus establish the relation between the BRDF degradation factors for the RSB and the SDSM SD view directions.

Lei, Ning↗
NASA NTRS1984

NGC 2024 - Far-infrared and radio molecular observations

New far-infrared continuum and millimeter-wave molecular observations of NGC 2024 are presented. The measurements were obtained at relatively high angular resolution making it possible to describe the source energetics and mass distribution in greater detail than previously reported. The object appears to be dominated by a dense ridge of material, extended in the north-south direction and centered on the dark lane that is seen in visual photographs. The maps of the source using the 'high-density' molecules CS and HCN confirm this picture and makes it possible to describe the core structure and molecular abundances. The radio molecular and infrared observations support the idea that an important exciting star in NGC 2024 has yet to be identified and is centered on the dense ridge about 1 arcmin south of the bright mid-infrared source IRS 2. The data presented here, along with other observations, make it possible to describe a model for the source.

Thronson, H. A., Jr.↗
NASA NTRS1987

Spacecraft external heating variations in orbit

The results of an evaluation of variations in on-orbit external heating of spacecraft surfaces are presented. The analyzed time-varying components are the direct solar, the latitude-dependent shortwave reflected, and the latitude-dependent longwave planetary-emitted radiation. Differences in instantaneous heating rates at a given latitude among the different model environments are found to be much larger than are differences in orbital mean heating rates. The discrepancies are found to increase with the orbit inclination angle. The ratio of Northern Hemisphere winter-to-summer orbital mean heating rates for a nadir-facing node is near unity and shows only a slight dependence on large variations in node absorptance. Mean orbital albedo and emission values for low-inclination orbits are found to differ significantly from global values obtained in meteorological studies. Algorithms relating mean orbital albedos and emissions to orbit inclination are developed. The relative importance of more realistic nondiffuse over diffuse reflections is evaluated for spacecraft heating and found to be negligible. The sun-spacecraft-earth angular configuration is such that, for reception of the peak intensities in the nondiffuse reflectance angular distribution, the albedo heating rate is more than adequately suppressed by an extremely small view factor from the spacecraft to the sunlit 'crescent' earth.

Leffler, J. M.↗
NASA NTRS1992

The relation of local measures of Hubble's constant to its global value

The distributions of fractional deviations of local values form global H0 that observers with perfect distance data would find if they surveyed specified volumes of the universe are examined here using new very large scale calculations of cold dark matter (CDM) and primordial isocurvature baryonic (PIB) scenarios for the origin of structure. It is found that the expected deviations due to large-scale motions are larger than quoted observational errors unless very large volumes are surveyed. Even perfect sampling and distances of all galaxies within a sphere extending out to the distances of the Virgo and Coma clusters would leave 45 percent and 3 percent rms uncertainties, respectively, in the global value of H0 in the CDM model. It is shown that the local versus global error in an H0 determination can be roughly estimated by the angular variance seen over the sky in the expansion rate, and that a very rough correction from the local to the global H0 value can be derived.

Turner, Edwin L.↗
NASA NTRS1991

Anisotropic inverse Compton emission

The angular distribution of the power and spectrum of Compton-scattered radiation in the case of an anisotropic distribution of soft photons is considered. Results obtained show that both the intensity and spectrum of the scattered radiation are a function of the Lorentz factor of the electrons, the geometry of the soft X-ray source and the viewing angle. The intensity of the hard X-rays scattered back into the bowl can be significantly greater (by a factor of up to 5.5) than that scattered toward the observer for an isotropic distribution of relativistic electrons at the center of a hemispherical bowl of soft X-ray emission. This factor is increased as the solid angle of the soft X-ray source subtended at the location of the electrons is reduced. The results obtained here have inmplications for models invoking a further 'reflection' of the resultant hard X-rays from the surface of a disk.

Ghisellini, G.↗
NASA NTRS1975

Production of hard X rays in a plasma focus

A model of a plasma focus is examined wherein large axial electric fields are produced by an imploding current sheet during the final nanoseconds of the collapse phase and where the fields provide a mechanism for creating a beam of electrons of highly suprathermal energies. The expected bremsstrahlung radiation above 100 keV is calculated for such a beam, which has a power-law spectrum, both from electron-deuteron collisions in the focused plasma and when the beam reaches the wall of the device. It is concluded that, since the experimental results indicate little or no radiation above 100 keV originating in the walls, that the electrons in the beam must be decelerated after leaving the plasma and before reaching the wall. Comparisons with the results and the total energy of the device yield qualitative agreement with the expected angular distribution of hard X-rays and reasonable agreement with the total energy in accelerated electrons required to produce the observed total energy in hard X-rays by this mechanism.

Newman, C. E.↗
DOE OSTI2026

Nonmonotonic-potential description of polarization effects, fusion, and nuclear rainbows in elastic scattering of 6 Li + 12 C at 4.5–600 MeV

The experimental differential cross-section (CS) and analyzing power (AP) data of the 6 Li + 12 C elastic scattering over a wide laboratory energy scale (4.5MeV≤𝐸 lab ≤600MeV) are analyzed within the framework of the optical model (OPM) using nonmonotonic (NM) nucleus–nucleus potentials. The real part of the NM potentials is derived from the Pauli-embodied energy density-functional (EDF) formalism with the sudden approximation. The real part of the noncentral spin-orbit and tensor terms, as well as the imaginary parts, are treated phenomenologically. The effect of the radius of sensitivity on the CS and AP data is found to be more important at lower energies. The diffractive and refractive scattering with Airy structures in the whole angular region of the elastic scattering across the studied energy range is successfully described within the OPM using the NM 6 Li + 12 C potential. The near- and far-side (N and F) decomposition of the total elastic-scattering amplitudes has also been studied using our NM potentials. The evolution of the Airy minima in the angular distributions, coupled with the fitting of the AP data, provides an accurate description of Airy minima of different orders. The OPM calculations with the NM potentials describe exceptionally well the CS, vector analyzing power (VAP), and tensor analyzing power data at 𝐸 lab =9.0,19.24,20,30, and 50MeV. In agreement with our past successful descriptions of CS and the opposite signs of the VAP data for the 6 Li and 7 Li elastic scattering using NM potentials in OPM, the present results appear to provide a better fit, so far, than those obtained from the coupled-channels method. The fusion cross sections of 6 Li + 12 C have been predicted in the energy range (4.5MeV≤𝐸 lab ≤20MeV), fitting the experimental data well in the range 𝐸 lab =2.97–11.77MeV. The EDF potential without any energy dependence and renormalization is also found to describe satisfactorily the experimental CS and AP data at energies up to several hundreds of MeV.

6 ≤ A ≤ 19↗
NASA NTRS1993

Atomic oxygen interaction at defect sights in protective coatings on polymers flown on LDEF

Although the Long Duration Exposure Facility (LDEF) has exposed materials with a fixed orientation relative to the ambient low-Earth-orbital environment, arrival of atomic oxygen is angularly distributed as a result of the atomic oxygen's high temperature Maxwellian velocity distribution and the LDEF's orbital inclination. Thus, atomic oxygen entering defects in protective coatings on polymeric surfaces can cause wider undercut cavities than the size of the defect in the protective coating. Because only a small fraction of atomic oxygen reacts upon first impact with most polymeric materials, secondary reactions with lower energy thermally accommodated atomic oxygen can occur. The secondary reactions of scattered and/or thermally accommodated atomic oxygen also contribute to widening the undercut cavity beneath the protective coating defect. As the undercut cavity enlarges, exposing more polymer, the probability of atomic oxygen reacting with underlying polymeric material increases because of multiple opportunities for reaction. Thus, the effective atomic oxygen erosion yield for atoms entering defects increases above that of the unprotected material. Based on the results of analytical modeling and computational modeling, aluminized Kapton multilayer insulation exposed to atomic oxygen on row 9 lost the entire externally exposed layer of polyimide Kapton, yet based on the results of this investigation, the bottom surface aluminum film must have remained in place, but crazed. Atomic oxygen undercutting at defect sites in protective coatings on graphite epoxy composites indicates that between 40 to 100 percent of the atomic oxygen thermally accommodates upon impact, and that the reaction probability of thermally accommodated atomic oxygen may range from 7.7 x 10(exp -6) to 2.1 x 10(exp -3), depending upon the degree of thermal accommodation upon each impact.

Banks, Bruce A.↗
NASA NTRS1993

On the tidal interaction between protostellar disks and companions

Formation of protoplanets and binary stars in a protostellar disk modifies the structure of the disk. Through tidal interactions, energy and angular momentum are transferred between the disk and protostellar or protoplanetary companion. We summarize recent progress in theoretical investigations of the disk-companion tidal interaction. We show that low-mass protoplanets excite density waves at their Lindblad resonances and that these waves are likely to be dissipated locally. When a protoplanet acquires sufficient mass, its tidal torque induces the formation of a gap in the vicinity of its orbit. Gap formation leads to the termination of protoplanetary growth by accretion. For proto-Jupiter to attain its present mass, we require that (1) the primordial solar nebula is heated by viscous dissipation; (2) the viscous evolution time scale of the nebula is comparable to the age of typical T Tauri stars with circumstellar disks; and (3) the mass distribution in the nebula is comparable to that estimated from a minimum-mass nebula model.

Lin, D. N. C.↗
NASA NTRS2007

Staggering Inflation To Stabilize Attitude of a Solar Sail

A document presents computational-simulation studies of a concept for stabilizing the attitude of a spacecraft during deployment of such structures as a solar sail or other structures supported by inflatable booms. Specifically, the solar sail considered in this paper is a square sail with inflatable booms and attitude control vanes at the corners. The sail inflates from its stowed configuration into a square sail with four segments and four vanes at the tips. Basically, the concept is one of controlling the rates of inflation of the booms to utilize in mass-distribution properties to effect changes in the system s angular momentum. More specifically, what was studied were the effects of staggering inflation of each boom by holding it at constant length for specified intervals between intervals of increasing length until full length is reached. The studies included sensitivity analyses of effects of variations in mass properties, boom lengths, rates of increase in boom length, initial rates of rotation of the spacecraft, and several asymmetries that could arise during deployment. The studies led to the conclusion that the final attitude of the spacecraft could be modified by varying the parameters of staggered inflation. Computational studies also showed that by feeding back attitude and attitude-rate measurements so that corrective action is taken during the deployment, the final attitude can be maintained very closely to the initial attitude, thus mitigating the attitude changes incurred during deployment and caused by modeling errors. Moreover, it was found that by optimizing the ratio between the holding and length-increasing intervals in deployment of a boom, one could cause deployment to track a desired deployment profile to place the entire spacecraft in a desired attitude at the end of deployment.

Quadrelli, Marco↗