Search NASA⌕ Search

SEARCH · Search NASA

Results for “asteroid sample”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

OSIRIS-REx Extended Mission Trajectory Design & Target Search

After jettisoning its Sample Return Capsule (SRC) containing regolith samples from the near-Earth asteroid (101955) Bennu to Earth in September 2023, the Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) spacecraft will perform a divert maneuver and safely fly by Earth at an altitude of 250 km. SRC return and the divert maneuver officially mark the completion of the spacecraft’s primary mission; however, it will continue on in heliocentric orbit with a nearly fully-functional instrument suite and enough propellant for nearly 600 m/s Delta-V. The post-Earth flyby trajectory fortuitously enables an exciting extended mission opportunity: rendezvous with the near-Earth asteroid (99942)Apophis immediately following its historic Earth close approach in April 2029. In this paper, we detail the discovery, optimization, and analysis of the Apophis rendezvous trajectory for an extended OSIRIS-REx mission. We also present the technical approach for an alternate target search and corresponding results, assessing the alternate trajectories compared to the baseline Apophis rendezvous from a trajectory design standpoint.

Brian Sutter↗
NASA NTRS2024

Primordial Aqueous Alteration Recorded in Water-Soluble Organic Molecules from the Carbonaceous Asteroid (162173) Ryugu

We report primordial aqueous alteration signatures in water-soluble organic molecules from the carbonaceous asteroid (162173) Ryugu by the Hayabusa2 spacecraft of JAXA. Newly identified low-molecular-weight hydroxy acids (HO-R-COOH) and dicarboxylic acids (HOOC-R-COOH), such as glycolic acid, lactic acid, glyceric acid, oxalic acid, and succinic acid, are predominant in samples from the two touchdown locations at Ryugu. The quantitative and qualitative profiles for the hydrophilic molecules between the two sampling locations shows similar trends within the order of ppb (parts per billion) to ppm (parts per million). A wide variety of structural isomers, including α- and β-hydroxy acids, are observed among the hydrophilic molecules. We also identify pyruvic acid and dihydroxy and tricarboxylic acids, which are biochemically important intermediates relevant to molecular evolution, such as the primordial TCA (tricarboxylic acid) cycle. Here, we find evidence that the asteroid Ryugu samples underwent substantial aqueous alteration, as revealed by the presence of malonic acid during keto–enol tautomerism in the dicarboxylic acid profile. The comprehensive data suggest the presence of a series for water-soluble organic molecules in the regolith of Ryugu and evidence of signatures in coevolutionary aqueous alteration between water and organics in this carbonaceous asteroid.

Asteroids, comets and Kuiper belt↗
NASA NTRS2018

Advanced Curation Development of Tools and Methods for Microparticle Curation

The Astromaterials Acquisition and Curation Office at NASA Johnson Space Center is currently developing new tools and methods for the collection, storage, handling and characterization of particles less than 100 microns in diameter, or microparticles. Astromaterials Curation currently maintains four microparticle collections: Cosmic Dust that has been collected in Earth’s stratosphere by ER2 and WB-57 aircraft, Comet 81P/Wild 2 dust returned by NASA’s Stardust spacecraft, interstellar dust that was returned by Stardust, and asteroid Itokawa particles that were returned by the JAXA (Japan Aerospace Exploration Agency)’s Hayabusa spacecraft. NASA Curation is currently preparing for the anticipated return of two new astromaterials collections – asteroid Ryugu regolith to be collected by Hayabusa II spacecraft in 2021 (samples will be provided by JAXA as part of an international agreement), and asteroid Bennu regolith to be collected by the OSIRIS-REx (Origins Spectral Interpretation Resource Identification Security - Regolith Explorer) spacecraft in 2023. In order to maximize the scientific yield from these valuable acquisitions, it will be necessary to develop methods that extend our current microsample handling capabilities. Here we describe recent progress in the development of sample handling techniques that will enhance our microparticle curation capabilities. Further described are: Six-Axis Robot Arms for Particle Manipulation, and Charge-Dissipative Substrates.

Snead, Christopher↗
NASA NTRS1992

Asteroid families - An initial search

A stereo examination was conducted for clusters in three-dimensional proper element space within a sample of both numbered and faint Palomar-Leiden Survey (PLS) asteroids. The clusters were then objectively filtered for small Poisson probability of chance occurrence; 104 were accepted as families with 4- to 12-member populations, and are interpreted as impact-generated. Structure is common in the well-populated families: the better-sampled families are accordingly discussed in terms of their geometry and taxonomy. Some families are very rich in faint PLS members.

Williams, James G.↗
NASA NTRS2012

Lunar and Meteorite Thin Sections for Undergraduate and Graduate Studies

The Johnson Space Center (JSC) has the unique responsibility to curate NASA's extraterrestrial samples from past and future missions. Curation includes documentation, preservation, preparation, and distribution of samples for research, education, and public outreach. Between 1969 and 1972 six Apollo missions brought back 382 kilograms of lunar rocks, core samples, pebbles, sand and dust from the lunar surface. JSC also curates meteorites collected on US expeditions to Antarctica including rocks from Moon, Mars, and many asteroids including Vesta. Studies of rock and soil samples from the Moon and meteorites continue to yield useful information about the early history of the Moon, the Earth, and the inner solar system.

Allen, J.↗
NASA NTRS1973

Radii and albedos of asteroids 1, 2, 3, 4, 6, 15, 51, 433, and 511

The following radii (in kilometers) and visual geometric albedos are derived for nine asteroids from 10- and 20-micron radiometry: 1 Ceres (540, .06); 2 Pallas (275, .08); 3 Juno (125, .14); 4 Vesta (270, .21); 6 Hebe (110, .16); 15 Eunomia (135, .15); 51 Nemausa (80, .05); 433 Eros (12, .07); and 511 Davida (180, .04). Vesta has the highest albedo measured for an asteroid, while Davida, the lowest-albedo object in the sample, is one of the darkest known objects in the solar system. The median of all asteroid albedos measured to date is 0.1.-

Cruikshank, D. P.↗
NASA NTRS2004

Lunar and Planetary Science XXXV: Missions and Instruments: Hopes and Hope Fulfilled

The titles in this section include: 1) Mars Global Surveyor Mars Orbiter Camera in the Extended Mission: The MOC Toolkit; 2) Mars Odyssey THEMIS-VIS Calibration; 3) Early Science Operations and Results from the ESA Mars Express Mission: Focus on Imaging and Spectral Mapping; 4) The Mars Express/NASA Project at JPL; 5) Beagle 2: Mission to Mars - Current Status; 6) The Beagle 2 Microscope; 7) Mars Environmental Chamber for Dynamic Dust Deposition and Statics Analysis; 8) Locating Targets for CRISM Based on Surface Morphology and Interpretation of THEMIS Data; 9) The Phoenix Mission to Mars; 10) First Studies of Possible Landing Sites for the Phoenix Mars Scout Mission Using the BMST; 11) The 2009 Mars Telecommunications Orbiter; 12) The Aurora Exploration Program - The ExoMars Mission; 13) Electron-induced Luminescence and X-Ray Spectrometer (ELXS) System Development; 14) Remote-Raman and Micro-Raman Studies of Solid CO2, CH4, Gas Hydrates and Ice; 15) The Compact Microimaging Spectrometer (CMIS): A New Tool for In-Situ Planetary Science; 16) Preliminary Results of a New Type of Surface Property Measurement Ideal for a Future Mars Rover Mission; 17) Electrodynamic Dust Shield for Solar Panels on Mars; 18) Sensor Web for Spatio-Temporal Monitoring of a Hydrological Environment; 19) Field Testing of an In-Situ Neutron Spectrometer for Planetary Exploration: First Results; 20) A Miniature Solid-State Spectrometer for Space Applications - Field Tests; 21) Application of Laser Induced Breakdown Spectroscopy (LIBS) to Mars Polar Exploration: LIBS Analysis of Water Ice and Water Ice/Soil Mixtures; 22) LIBS Analysis of Geological Samples at Low Pressures: Application to Mars, the Moon, and Asteroids; 23) In-Situ 1-D and 2-D Mapping of Soil Core and Rock Samples Using the LIBS Long Spark; 24) Rocks Analysis at Stand Off Distance by LIBS in Martian Conditions; 25) Evaluation of a Compact Spectrograph/Detection System for a LIBS Instrument for In-Situ and Stand-Off Detection; 26) Analysis of Organic Compounds in Mars Analog Samples; 27) Report of the Organic Contamination Science Steering Group; 28) The Water-Wheel IR (WIR) - A Contact Survey Experiment for Water and Carbonates on Mars; 29) Mid-IR Fiber Optic Probe for In Situ Water Detection and Characterization; 30) Effects of Subsurface Sampling & Processing on Martian Simulant Containing Varying Quantities of Water; 31) The Subsurface Ice Probe (SIPR): A Low-Power Thermal Probe for the Martian Polar Layered Deposits; 32) Deploying Ground Penetrating Radar in Planetary Analog Sites to Evaluate Potential Instrument Capabilities on Future Mars Missions; 33) Evaluation of Rock Powdering Methods to Obtain Fine-grained Samples for CHEMIN, a Combined XRD/XRF Instrument; 34) Novel Sample-handling Approach for XRD Analysis with Minimal Sample Preparation; 35) A New Celestial Navigation Method for Mars Landers; 36) Mars Mineral Spectroscopy Web Site: A Resource for Remote Planetary Spectroscopy.

Source record↗
NASA NTRS2024

Hydrogen Isotopic Composition of Hydrous Minerals in Particles From Bennu

On September 24, 2023, NASA’s OSIRIS-REx mission delivered to Earth ~121 g of pristine carbonaceous regolith from asteroid Bennu. A first series of mineralogical observations and chemical/isotopic analyses of Bennu aggregate samples (fine to coarse particles up to a few mm) revealed that this material resembles the most chemically primitive chondrites and the samples returned by the JAXA’s Hayabusa2 mission from the carbonaceous asteroid Ryugu. Laboratory studies have confirmed the story gleaned from the spacecraft encounter that Bennu’s rock fragments underwent extensive aqueous alteration and are predominantly composed of hydrated minerals (serpentine, smectite) and other secondary minerals (e.g., magnetite, carbonates). The secondary phases were likely formed under the presence of liquid water on Bennu’s parent asteroid. The isotopic compositions of hydrous minerals and secondary phases can increase our understanding of the source and distribution of water and volatile elements in the protoplanetary disk [e.g., 5-8]. However, direct estimates of the hydrogen isotopic ratios (D/H) in hydrous minerals cannot be obtained easily in primitive rocks due to the difficulty in estimating the organic matter (OM) contribution to the whole H budget. In order to obtain hints on the initial constituents of Bennu’s parent asteroid and to test if Bennu's parent asteroid have formed beyond the snow line (hypothesis 4 of [9]), we measured the D/H and C/H ratios in chondritic matrices by secondary ion mass spectrometry (SIMS) and obtain information on the D/H ratio of water retained in the hydrated minerals. The method also gives clues on the hydrogen isotope variability among different Bennu rock fragments made available for measurement.

L Piani↗
NASA NTRS1986

Radar investigation of asteroids

The number of radar detected asteroids has climbed from 6 to 40 (27 mainbelt plus 13 near-Earth). The dual-circular-polarization radar sample now comprises more than 1% of the numbered asteroids. Radar results for mainbelt asteroids furnish the first available information on the nature of these objects at macroscopic scales. At least one object (2 Pallas) and probably many others are extraordinarily smooth at centimeter-to-meter scales but are extremely rough at some scale between several meters and many kilometers. Pallas has essentially no small-scale structure within the uppermost several meters of the regolith, but the rms slope of this regolith exceeds 20 deg., much larger than typical lunar values (approx. 7 deg.). The origin of these slopes could be the hypervelocity impact cratering process, whose manifestations are likely to be different on low-gravity, low-radius-of-curvature objects from those on the terrestrial planets. The range of mainbelt asteroid radar albedoes is very broad and implies big variations in regolith porosity or metal concentration, or both. The highest albedo estimate, for 16 Psyche, is consistent with a surface having porosities typical of lunar soil and a composition nearly completely metallic. Therefore, Psyche might be the collisionally stripped core of a differentiated small plant, and might resemble mineralogically the parent bodies of iron meteorites.

Ostro, S. J.↗
NASA NTRS1993

Spectral evidence of size dependent space weathering processes on asteroid surfaces

Most compositional characterizations of the minor planets are derived from analysis of visible and near-infrared reflectance spectra. However, such spectra are derived from light which has only interacted with a very thin surface layer. Although regolith processes are assumed to mix all near-surface lithologic units into this layer, it has been proposed that space weathering processes can alter this surface layer to obscure the spectral signature of the bedrock lithology. It has been proposed that these spectral alteration processes are much less pronounced on asteroid surfaces than on the lunar surface, but the possibility of major spectral alteration of asteroidal optical surfaces has been invoked to reconcile S-asteroids with ordinary chondrites. The reflectance spectra of a large subset of the S-asteroid population have been analyzed in a systematic investigation of the mineralogical diversity within the S-class. In this sample, absorption band depth is a strong function of asteroid diameter. The S-asteroid band depths are relatively constant for objects larger than 100 km and increase linearly by factor of two toward smaller sizes (approximately 40 km). Although the S-asteroid surface materials includes a diverse variety of silicate assemblages, ranging from dunites to basalts, all compositional subtypes of the S-asteroids conform to this trend. The A-, R-, and V-type asteroids which are primarily silicate assemblages (as opposed to the metal-silicate mixtures of most S-asteroids) follow a parallel but displaced trend. Some sort of textural or regolith equilibrium appears to have been attained in the optical surfaces of asteroids larger than about 100 km diameter but not on bodies below this size. The relationships between absorption band depth, spectral slope, surface albedo and body size provide an intriguing insight into the nature of the optical surfaces of the S-asteroids and space weathering on these objects.

Gaffey, M. J.↗
NASA NTRS1979

Distant asteroids and outer Jovian satellites

Sixty percent of the sampled objects in the Hilda, Trojan and outer Jovian satellite locations belong to C-type and another 30% belong to a new group called RD-type (reddish and dark), sometimes referred to simply as D-type. Objects in this group have low albedo values between 2 and 4% and steep reflection spectra between 0.7 micron and 0.9 micron. Furthermore, 944 Hidalgo belongs to this group but shows color variation over its surface. Meteoritic minerals with similar optical reflection spectra are discussed. Trojans with sizes down to 15 km in the cloud preceding Jupiter are about 3.5 times more numerous than those in the following cloud. RD-type Trojans appear more often in the preceding cloud. There is a resemblance of spectrum, albedo and phase relation among the majority of Trojans and the outer Jovian satellites.

Degewij, J.↗
NASA NTRSDate not supplied

Photometric Correction of Hayabusa2's NIRS3 Spectra of Asteroid 162173 Ryugu Using Empirical Photometric Models

In 2018, Japanese Aerospace Exploration Agency’s spacecraft Hayabusa2 began a near infrared spectroscopic imaging survey of near-Earth asteroid 162173 Ryugu. Hayabusa2 is a successful sample-return mission with an overarching goal to provide a better understanding of the origin and evolution of our solar system. The target, Ryugu, is a low-albedo carbonaceous asteroid (Cb-type) that is linked to carbonaceous chondrite meteorites. It is thought to have originated in the main asteroid belt and migrated inward to become a near-Earth asteroid, and therefore reachable by spacecraft. Preliminary findings from processed NIRS3data have shown that hydroxyl-bearing minerals are present on the surface of Ryugu, and it is likely the result of impact fragments from an aqueously altered parent body.In this project, we have used newly calibrated and processed NIRS3 data using updated shape models of Ryugu. NIRS3 spectra have both a thermal and reflectance component. The thermal component (beyond 2.5 microns) was modeled and removed from all NIRS3 spectra. Ryugu spectra were taken at different viewing geometries, and a photometric model needed to be developed to normalize all of the spectra at a common geometry for each mission phase. We have used three empirical models: Minnaert, Lommel-Seeliger, and ROLO (RObotic LunarOrbiter). These models were chosen for their ability to relate the surface reflectance to the viewing geometry, as well as their compatibility with the asteroid’s albedo range. The three models provide the global light scattering properties of Ryugu’s surface and subsequently enable us to calculate the geometric albedo, phase integral, spherical bond albedo, and the average surface normal albedo for Ryugu.

Lucille Grace Williamson↗
NASA NTRS2014

Nanoscale Analysis of Space-Weathering Features in Soils from Itokawa

Space weathering alters the spectral properties of airless body surface materials by redden-ing and darkening their spectra and attenuating characteristic absorption bands, making it challenging to characterize them remotely [1,2]. It also causes a discrepency between laboratory analysis of meteorites and remotely sensed spectra from asteroids, making it difficult to associate meteorites with their parent bodies. The mechanisms driving space weathering include mi-crometeorite impacts and the interaction of surface materials with solar energetic ions, particularly the solar wind. These processes continuously alter the microchemical and structural characteristics of exposed grains on airless bodies. The change of these properties is caused predominantly by the vapor deposition of reduced Fe and FeS nanoparticles (npFe(sup 0) and npFeS respectively) onto the rims of surface grains [3]. Sample-based analysis of space weathering has tra-ditionally been limited to lunar soils and select asteroidal and lunar regolith breccias [3-5]. With the return of samples from the Hayabusa mission to asteroid Itoka-wa [6], for the first time we are able to compare space-weathering features on returned surface soils from a known asteroidal body. Analysis of these samples will contribute to a more comprehensive model for how space weathering varies across the inner solar system. Here we report detailed microchemical and microstructal analysis of surface grains from Itokawa.

Thompson, M. S.↗
NASA NTRS1997

Origin and Evolution of the Unusual Object 1996 PW: Asteroids from the Oort Cloud?

The unusual object 1996 PW was discovered on 1996 August 9 by the Near-Earth Asteroid Tracking automated search camera operating from Haleakala in Hawaii. Although asteroidal in appearance, it was soon determined that the object is in a near-parabolic orbit similar to that of a long-period comet. No object that was not an active comet has ever been discovered on such an eccentric orbit. The discovery of 1996 PW prompted us to examine and evaluate its possible origins, including the intriguing possibility that it is an asteroid from the Oort cloud. Current models for the formation of the Oort cloud argue that most of the material there should be from the Uranus-Neptune region and thus cometary, not asteroidal, in composition. We better quantify these models and show that approximately 1% of the Oort Cloud population should be asteroids. We find that 1996 PW has almost certainly been a resident of the Oort cloud. However, we find it equally likely that 1996 PW is an extinct comet or an asteroid. Although not conclusive, our results represent a significant change in our understanding of the Oort cloud, because they suggest that the ejection process sampled material from as close to the Sun as the asteroid belt in the primordial solar nebula and hence much warmer formation temperatures than previously thought. This diverse sample is preserved in the Oort cloud.

Weissman, Paul R.↗
NASA NTRSDate not supplied

OSIRIS-REx Earth Return & Entry: Targeting Strategy and Maneuver Performance

The OSIRIS-REx sample return capsule landed safely in the Utah desert on September 24, 2023. Starting with the departure from asteroid Bennu in May 2021 through the release of the sample capsule and its arrival at the edge of Earth’s atmosphere hours later, this phase of the mission was planned and analyzed thoroughly to optimize the probability of a successful sample return in a large number of nominal and off-nominal scenarios, all while emphasizing spacecraft safety. This paper discusses the spacecraft and sample capsule Earth return and atmospheric entry trajectory design, maneuver analysis, and flight performance, which ultimately helped lead to a successful sample return and initiation of the OSIRIS-APEX extended mission.

Daniel R. Wibben↗
NASA NTRS2021

Trajectory Design and Maneuver Performance of the OSIRIS-REx Low-Altitude Reconnaissance of Bennu

With more than a year of asteroid proximity operations, the OSIRIS-REx team was able to identify one primary and one backup site for sample collection. The next step was to finalize on-board, localized image libraries and site-specific terrain information prior to attempting sample acquisition. Collecting this information required additional, low-altitude asteroid flyby reconnaissance activities. These activities, referred to as ‘sorties’, involved special maneuver and trajectory designs, unique from any other OSIRIS-REx maneuver activity. In order to minimize time between flybys and decrease the total number of maneuvers required, this trajectory design departed from and returned to a frozen Sun-terminator plane orbit within the span of a few hours. This work discusses the trajectory design and performance of the four flybys that were used to collect key topographic science observations of the primary and backup sample sites, which helped lead to a successful sample collection.

Andrew Levine↗
NASA NTRS2012

Analysis of the Touch-And-Go Surface Sampling Concept for Comet Sample Return Missions

This paper studies the Touch-and-Go (TAG) concept for enabling a spacecraft to take a sample from the surface of a small primitive body, such as an asteroid or comet. The idea behind the TAG concept is to let the spacecraft descend to the surface, make contact with the surface for several seconds, and then ascend to a safe location. Sampling would be accomplished by an end-effector that is active during the few seconds of surface contact. The TAG event is one of the most critical events in a primitive body sample-return mission. The purpose of this study is to evaluate the dynamic behavior of a representative spacecraft during the TAG event, i.e., immediately prior, during, and after surface contact of the sampler. The study evaluates the sample-collection performance of the proposed sampling end-effector, in this case a brushwheel sampler, while acquiring material from the surface during the contact. A main result of the study is a guidance and control (G&C) validation of the overall TAG concept, in addition to specific contributions to demonstrating the effectiveness of using nonlinear clutch mechanisms in the sampling arm joints, and increasing the length of the sampling arms to improve robustness.

Touch-and-Go (TAG)↗