Interstellar and intergalactic absorption of cosmic X rays.
Interstellar X-ray absorption edges due to K- shell photoionization of oxygen and neon, using element abundances and atomic photoelectric cross section data
X-RAY ABSORPTION↗
SEARCH · Search NASA
Results for “atomic data”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Elementary review of electron microprobe techniques and correction requirements
Report contains requirements for correction of instrumented data on the chemical composition of a specimen, obtained by electron microprobe analysis. A condensed review of electron microprobe techniques is presented, including background material for obtaining X ray intensity data corrections and absorption, atomic number, and fluorescence corrections.
Hart, R. K.↗
Analysis of OGO-6 observations of the 0 I 5577A tropical nightglow
Atomic oxygen green line data from the horizon scanning photometer on OGO-6 was examined. Unfolding the satellite data from the tropical F-region yields altitude and latitude variations of the O(1S) emissions. The spatial variations of the tropical F-region electron density are then calculated by assuming dissociative recombination and using a model atmosphere. Where comparisons to ground-based data are possible the results are good. Thus, the satellite observations constitute a form of topside sounding of the ionosphere below the F-peak and provide synoptic data about this portion of the ionsphere otherwise impractical to obtain.
Thomas, R. J.↗
Analysis of Ogo 6 observations of the O I 5577-A tropical nightglow.
Atomic oxygen green line data from the horizon scanning photometer on Ogo 6 have been examined. Unfolding the satellite data from the tropical F region yields altitude and latitude variations of the O(1S) emissions. The spatial variations of the tropical F-region electron density are then calculated by assuming dissociative recombination and using a model atmosphere. Where comparisons to ground based data are possible the results are good. Thus, the satellite observations constitute a form of topside sounding of the ionosphere below the F peak and provide synoptic data about this portion of the ionosphere that are otherwise impractical to obtain.
Thomas, R. J.↗
Atomic oxygen transport in the thermosphere.
The photodissociation of oxygen in the lower thermosphere is evaluated to obtain its global average value and the hemispheric imbalance. The observed concentrations of atomic oxygen do not reflect this imbalance in production due to the effect of seasonal wind patterns redistributing the atomic oxygen. The wind system necessary to compensate for the imbalance in solar thermal input into the lower thermosphere is found to transport an amount of atomic oxygen sufficient to compensate for the hemispheric imbalance in production. Ionospheric data indicate a winter enhancement in atomic oxygen concentration; to produce this, a higher degree of oxygen dissociation than that normally accepted (i.e., higher than an atomic to molecular oxygen ratio of unity at 120 km) is needed. The concept that the concentrations of atomic oxygen observed over the winter polar region are maintained by transport from lower latitudes requires that eddy diffusion coefficients derived from vertical transport at low latitudes (ignoring horizontal transport) be reduced by about 25%.
Johnson, F. S.↗
A comparison of interstellar Na I, Ca II, and K I absorption
The strongest and generally most useful optical interstellar absorption lines include the D lines of Na I, the H and K lines of Ca II, and the resonance doublet at 7600 A and 7664 A of K I. The interferometric data for these strongest atomic lines are examined in a comprehensive manner. The numerical results pertaining to the total column densities are collected in a table, which lists 82 stars. The correlations among some of the quantities listed in the table are displayed in a number of graphs.
Hobbs, L. M.↗
Composition measurements of the topside ionosphere using a magnetic mass spectrometer, ion mass spectrometer on ISIS-2 spacecraft
The ion mass spectrometer (IMS) on the ISIS-II satellite is described; it measures the composition and distribution of positive ions in the earth's ionosphere in the mass range of 1 to 64 atomic mass units. Significant data were received which show a wide variation in ion composition at night near the equator and in the daytime poleward of the plasmapause. It was found that these data enable further study of the polar wind and that the experiment produced timely data during the August, 1972 magnetic storm to show the development of a unique ionosphere above the plasmapause during the period of the storm. The scientific objectives and results of the experiment, the technical description of the instrument, a bibliography with sample papers attached, and a summary of recommendations for further study are presented.
Hoffman, J. H.↗
Handbook of liquid metals
Metals are described by physical appearance followed by atomic weight, atomic number, and valence. Data includes laboratory handling and safety procedures, heat transfer correlations, diffusion coefficients in liquid gallium/indium solution, melting and boiling points, thermal conductivity, heat capacity, and electrical resistivity.
Ukanwa, A. O.↗
The coronal temperature and nonthermal motions in a coronal hole compared with other solar regions
The coronal lines Si VIII (1446 A), Fe X (1463 A), Fe XI (1467 A), and Fe XII (1242 A and 1349 A) were observed above the limb over a quiet region, a coronal hole, and two active regions. The lines emitted at temperatures greater than 1 million K; i.e., the iron lines, are not observed in the coronal-hole spectra, so the indication is that in the coronal hole most of the plasma is at a temperature of less than 1 million K. The emission measures and column densities of the lines are derived from available atomic cross-section data, and the results are discussed. The nonthermal velocities in the coronal hole and quiet region are about 20 km/s. The velocities in the active regions are substantially less.
Doschek, G. A.↗
The role of drop velocity in statistical spray description
The justification for describing a spray by treating drop velocity as a random variable on an equal statistical basis with drop size was studied experimentally. A double exposure technique using fluorescent drop photography was used to make size and velocity measurements at selected locations in a steady ethanol spray formed by a swirl atomizer. The size velocity data were categorized to construct bivariate spray density functions to describe the spray immediately after formation and during downstream propagation. Bimodal density functions were formed by environmental interaction during downstream propagation. Large differences were also found between spatial mass density and mass flux size distribution at the same location.
Groeneweg, J. F.↗
Line-by-line transport calculations for Jupiter entry probes
Line-by-line calculations of the radiative transport for a condition near peak heating for entry of the Galileo probe into the Jovian atmosphere are described. The discussion includes a thorough specification of the atomic and molecular input data used in the calculations that could be useful to others working in the field. The results show that the use of spectrally averaged cross sections for diatomic absorbers such as CO and C2 in the boundary layer can lead to an underestimation (by as much as 29%) of the spectral flux at the stagnation point. On the other hand, for the turbulent region near the cone frustum on the probe, the flow tends to be optically thin, and the spectrally averaged results commonly used in coupled radiative transport-flow field calculations are in good agreement with the present line-by-line results. It is recommended that these results be taken into account in sizing the final thickness of the Galileo's heat shield.
Arnold, J. O.↗
A new sunspot umbral model and its variation with the solar cycle
Semiempirical model atmospheres are presented for the darkest parts of large sunspot umbrae, regions have called umbral cores. The approach is based on general-purpose computational procedures that are applicable to different types of stellar atmospheres. It is shown that recent umbral intensity measurements of the spectral energy distribution may be accounted for by an umbral core atmospheric model that varies with time during the solar cycle; the observed center-limb variation can be accounted for by the properties of the model. Three umbral core models are presented, corresponding to the early, middle, and late phases of the solar cycle. These three models also may be regarded as having the properties of dark, average, and bright umbral cores respectively. The effects of atomic, opacity, and abundance data uncertainties on the model calculations are briefly discussed. For comparison, a new reference model for the average quiet solar photosphere is given.
Maltby, P.↗
A hydrogen maser with cavity auto-tuner for timekeeping
A hydrogen maser frequency standard for timekeeping was worked on at the Shanghai Observatory. The maser employs a fast cavity auto-tuner, which can detect and compensate the frequency drift of the high-Q resonant cavity with a short time constant by means of a signal injection method, so that the long term frequency stability of the maser standard is greatly improved. The cavity auto-tuning system and some maser data obtained from the atomic time comparison.
C. F. Lin↗
Atomic oxygen effects on SiO(x) coated Kapton for photovoltaic arrays in low earth orbit
Commercially applied SiOx was evaluated as a protective coating for the polyimide Kapton solar array blankets for Space Station Freedom. Three different rolls of coated material were tested in a plasma asher to determine their durability to attack by atomic oxygen. Mass loss data indicated that all of the coatings tested would structurally survive for 15 years in LEO (low earth orbit), except for one which had several uncoated lines across the sample which were caused by ridgelanes in the Kapton. It appears that the size rather than number of defects alone effects the mass loss the most. Careful handling of the material after coating and during processing may be critical for array survival.
Rutledge, Sharon K.↗
Fuels irradiation testing for the SP-100 program
An SP-100 fuel pin irradiation testing program is well on the way to providing data for performance correlations and demonstrating the lifetime and safety of the fuel system of the compact lithium-cooled reactor. Key SP-100 fuel performance issues addressed are the need for low fuel swelling and low fission gas release to minimize cladding strain, and the need for barrier integrity to prevent fuel/cladding chemical interaction. This paper provides a description of the irradiation test program that addresses these key issues and summarizes recent results of posttest examinations including data obtained at 6 atom percent goal burnup.
Makenas, Bruce J.↗
Experimental and Calculational Studies of the Interactions of BF3 with Fluoroethers
BF3 was co-condensed with (C2H5)2O, (CF3CH2)2O and (C2F5)2O in excess argon at 15 K. Infrared spectra of the matrices showed a definite Lewis acid-base interaction between BF3 and diethyl ether; a weak but definite interaction with bis(2,2,2,-trifluorodiethyl)ether, and no observable interaction with perfluorodiethyl ether. Molecular orbital (MO) calculations complemented the experimental observations by revealing that fluorine atoms on the ethers decreased electron localization about the oxygen atom. Thus, the experimental data and MO calculations indicated a clear trend between strength of interaction with BF3 and the degree of ether F substitution. The implications of the results for commercial perfluoro ether lubricant/metal oxide surface interactions are discussed.
Zehe, Michael J.↗
Analysis of Metallized Teflon(trademark) Film Materials Performance on Satellites
Laboratory and on-orbit performance data for two common thermal control materials, silver- and aluminum-backed (metallized) fluorinated ethyl-propylene (TER) was collected from a variety of sources and analyzed. This paper demonstrates that the change in solar absorptance, alpha, is a strong function of particulate radiation for these materials. Examination of additional data shows that the atomic oxygen recession rate is a strong function of solar exposure with an induction period of between 25 to 50 equivalent solar hours. The relationships determined in this analysis were incorporated into an electronic knowledge base, the 'Spacecraft Materials Selector,' under NASA contract NAS8-98213.
Pippin, H. Gary↗
Effect of LEO Exposure on Aromatic Polymers Containing Phenylphosphine Oxide Groups
As part of the Materials on The International Space Station Experiment (MISSE), aromatic polymers containing phenylphosphine oxide groups were exposed to low Earth orbit (LEO) for approximately 4 years. All of the aromatic polymers containing phenylphosphine oxide groups survived the exposure despite the high fluence of atomic oxygen that completely eroded other polymer films such as Kapton and Mylar of comparable or greater thickness. The samples consisted of a colorless polyimide film and a poly(arylene ether benzimidazole) film and thread. The samples were characterized for changes in physical properties, thermal/optical properties (i.e. solar absorptivity and thermal emissivity), surface chemistry (X-ray photoelectron spectroscopy), and surface topography (atomic force microscopy). The data from the polymer samples on MISSE were compared to samples from the same batch of material stored under ambient conditions on Earth. In addition, comparisons were made between the MISSE samples and those subjected to shorter term space flight exposures. The results of these analyses will be presented.
Watson, K. A.↗