Search NASA⌕ Search

SEARCH · Search NASA

Results for “coherent diffraction microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Resistance-Based Ceramic Ho123 Ionic Conductor for Oxygen Gas Sensing

Oxygen sensing properties of HoBa{sub 2}Cu{sub 3}O{sub 7-d}elta ceramic rods utilizing hot-spot phenomenon have been characterized. The rods were prepared from high purity oxides using the conventional solid-state reaction method. I-V characterization showed increase in output current with voltage before the appearance of the hot spot. After the appearance of the hot-spot, the output current strongly depended on oxygen partial pressure. The rod showed stable sensing characteristics with good electrical stability and reproducibility with higher sensitivity at low oxygen partial pressure. The sensing property is associated with the absorption of oxygen and dissociation into holes and oxide ions. Ho123 is more sensitive at pO{sub 2} below 20% compared to Er123 possibly due to differences in oxygen activation energy related to RE ionic radius.

36 MATERIALS SCIENCE↗

Microstructural Characterisation of Giant Magnetoresistive Co/Cu Multilayers

Antiferromagnetically-coupled Co/Cu multilayers prepared by magnetron sputtering exhibit pronounced giant magnetoresistance (GMR) effect at room temperature. Using both diffraction and imaging techniques, we studied the in-plane and out-of-plane crystallographic and layering microstructural features of these multilayers. Dominant characteristic features associated with the multilayers, such as lateral and vertical columnar grain orientations as well as layer undulations and regularity, were identified. By deliberately introducing microstructural changes to the materials system using buffer layer and heat treatment, detailed microstructural analysis have provided an insight into the dependence of GMR on microstructures of the multilayers.

36 MATERIALS SCIENCE↗

Influence of Sintering Temperature on Microstructure and Electrical Properties of La{sub 0.67}Ba{sub 0.33}MnO{sub 3} Ceramic

In this study we report the effect of the sintering temperature of polycrystalline La{sub 0.67}Ba{sub 0.33}MnO{sub 3}(LBMO) manganites synthesized via solid state reaction method. LBMO have been sintered at 900 to 1200 deg. C in intervals of 100 deg. C. X-ray diffraction spectrum confirms that LBMO phase formation starts at 900 deg. C accompany by a minor second phase of BaMnO{sub 3} and fully forms into single phase of LBMO at 1200 degree sign C. SEM images showed that, the grain size increased with sintering temperature and leading to densifications or lower porosity. The T{sub p} was not affected by the sintering temperature. However, the electrical resistances of samples were decreased with the sintering temperature. At higher sintering temperature, due to grain growth and reduction of insulating BaMnO{sub 3} phase, the intergrain connectivity has been improved and the resistance drops.

36 MATERIALS SCIENCE↗

Preparation and Properties of FeCo Nanoparticles

Fe-Co nanoparticles were prepared from the binary Fe-Co oxalate. The formation of FeCo metallic phase begun at 290 deg. C as determined from the X-ray diffraction patterns recorded during heating of the oxalate sample in hydrogen atmosphere. The reduction finished at 500 deg. C by formation of bcc FeCo phase with a mean particle size of about 50 nm. Analysis of the Moessbauer spectra shows that the ferromagnetic FeCo phase is represented by two sextets corresponding to interiors and surfaces of the nanoparticles. In addition, a weak paramagnetic component, represented by the doublet, was observed which was ascribed to fine particles in a superparamagnetic state. TEM images have shown conglomerates of particles with the composition of about 50 at. % Fe and 50 at. % Co.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Mechanical Properties and Microstructure of Plasma Sprayed Ni-Based Metallic Glass Coating

Various developmental research works on the metallic glass have been conducted in order to broaden its application field. Thermal spraying method is one of the potential techniques to enhance the excellent properties such as high toughness and corrosion resistance of the metallic glass material. The gas tunnel type plasma spraying is useful to obtain high quality ceramic coatings such as Al{sub 2}O{sub 3} and ZrO{sub 2} coatings. In this study, the Ni-based metallic glass coatings were produced by the gas tunnel type plasma spraying under various experimental conditions, and their microstructure and mechanical properties were investigated. At the plasma current of 200-300 A, the Ni-based metallic glass coatings of more than 200 {mu}m in thickness were formed densely with Vickers hardness of about Hv = 600.

36 MATERIALS SCIENCE↗

Transparent Conductive Coating Based on Carbon Nanotubes Using Electric Field Deposition Method

The transparent conductive coating based on carbon nanotubes (CNTs) had been fabricated using the electric field deposition method. The scanning electron microscope (SEM) results show a quite uniform CNTs on Corning glass substrates. Moreover the X-ray Diffraction (XRD) results shows the peak at around 25 deg. which proves the existence of CNT materials. The CNT thin films obtained with different deposition times have different transmittance coefficients at wavelength of 550 nm. I-V measurement results shows higher sheet resistance value which relates with bigger transmittance coefficients and vice versa.

36 MATERIALS SCIENCE↗

Electrical Characteristics CuFe{sub 2}O{sub 4} Thick Film Ceramics Made with Different Screen Size Utilizing Fe{sub 2}O{sub 3} Nanopowder Derived from Yarosite for NTC Thermistor

Fabrication of CuFe{sub 2}O{sub 4} thick film ceramics utilizing Fe{sub 2}O{sub 3} derived from yarosite using screen printing technique for NTC thermistor has been carried out. Effect of thickness variation due to different size of screen (screen 225; 300 and 375 mesh) has been studied. X-ray diffraction analyses (XRD) was done to know crystal structure and phases formation. SEM analyses was carried out to know microstructure of the films. Electrical properties characterization was done through measurement of electrical resistance at various temperatures (room temperature to 100 deg. C). The XRD data showed that the films crystalize in tetragonal spinel. The SEM images showed that the screen with the smaller of the hole size, made the grain size was bigger. Electrical data showed that the larger the screen different size thickness variation (mesh), the larger the resistance, thermistor constant and sensitivity. From the electrical characteristics data, it was known that the electrical characteristics of the CuFe{sub 2}O{sub 4} thick film ceramics followed the NTC characteristic. The value of B and R{sub RT} of the produced CuFe{sub 2}O{sub 4} ceramics namely B = 3241-3484 K and R{sub RT} = 25.6-87.0 M Ohm, fitted market requirement.

36 MATERIALS SCIENCE↗

Structural And Electrical Analysis Of Lead Free BZT-xBCT Ceramics

A comparative study of structural and electric properties of a recently discovered lead free electroceramic, Ba(Zr{sub 0.2}Ti{sub 0.8})O{sub 3}-x(Ba{sub 0.7}Ca{sub 0.3})TiO{sub 3} or BZT-xBCT, was conducted in the entire range from x = 0 to x = 1. This novel ceramic composite is being seen as a genuine understudy for commercially one of the most widely used piezoelectric ceramic, PZT, which is facing worldwide criticism due to its lead toxicity. The new system can be very extensively used like PZT in transduction applications as sensor, actuator and ultrasonic devices apart from numerous other utilities. The XRD, SEM and Ferroelectric studies establish the structural transition and different phases as function of Zr /Ti and Ba /Ca ratios.

36 MATERIALS SCIENCE↗

Perpendicular ferrimagnetism in strained Mn{sub 2}As film

Ferrimagnetic Mn{sub 2}As thin films with perpendicular magnetic anisotropy were successfully grown on Si(100) by molecular-beam epitaxy. From the reflection high-energy electron diffraction and X-ray diffraction patterns, the orientation of the Mn{sub 2}As film on Si was along the c-axis in the tetragonal crystal structure. Mn{sub 2}As film exhibited ferrimagnetic ordering at temperatures greater than 300 K, which differs from antiferromagnetic or paramagnetic behaviors in the bulk form. The magnetic moment of Mn{sub 2}As determined by saturated magnetization was 0.51 {mu}{sub B} per unit cell.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and Characterization of Ba(Zr{sub x}Ti{sub 1-x})O{sub 3} Solid Solutions Using Impedance Spectroscopic Techniques

Technologically important solid solutions of Ba(Zr{sub x}Ti{sub 1-x})O{sub 3} are synthesized using conventional solid state route. Relatively dense and single phase ceramics are confirmed using X-ray diffraction. Homogeneous and micron size grain growth is characterized using SEM. Impedance spectroscopy is used to study the electrical properties of ceramics. Broad and diffuse impedance loss peak is observed above 250 deg. C, which shifts towards higher frequency with increase in temperature. The distribution of relaxation frequency may be associated with the B-site cationic disorder due to the random distribution of (Zr{sup 4+}/Ti{sup +4}) having different ionic radii. Impedance relaxation obeys the Arrhenius relation with activation energy, E{tau} is 0.31 eV and 0.48 eV for BZT compositions with x = 0.10 and 0.15 respectively. Equivalent circuit representation using two RC element coupled in parallel is used to analyse the impedance response.

36 MATERIALS SCIENCE↗

Sub-pixel high-resolution imaging of high-energy x-rays inspired by sub-wavelength optical imaging

We have developed and demonstrated an image super-resolution method—XR-UNLOC: X-Ray UNsupervised particle LOCalization—for hard x-rays measured with fast-frame-rate detectors that is an adaptation of the principle of photo-activated localization microscopy (PALM) and stochastic optical reconstruction microscopy (STORM), which enabled biological fluorescence imaging at sub-optical-wavelength scales. We demonstrate the approach on experimental coherent Bragg diffraction data measured with 52 keV x-rays from a nanocrystalline sample. From this sample, we resolve the fine fringe detail of a high-energy x-ray Bragg coherent diffraction pattern to an upsampling factor of 16 of the native pixel pitch of 30 μ m of a charge-integrating fastCCD detector. This was accomplished by analysis of individual photon locations in a series of “nearly-dark” instances of the diffraction pattern that each contain only a handful of photons. Central to our approach was the adaptation of the UNLOC photon fitting routine for PALM/STORM to the hard x-ray regime to handle much smaller point spread functions, which required a different statistical test for photon detection and for sub-pixel localization. A comparison to a photon-localization strategy used in the x-ray community (“droplet analysis”) showed that XR-UNLOC provides significant improvement in super-resolution. We also developed a metric by which to estimate the limit of reliable upsampling with XR-UNLOC under a given set of experimental conditions in terms of the signal-to-noise ratio of a photon detection event and the size of the point spread function for guiding future x-ray experiments in many disciplines where detector pixelation limits must be overcome.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

CuO-ZnO heterometallic hollow spheres: Morphology and defect structure

The Cu-ZnO hollow spheres, where CuO nanocrystals were dispersed in the shell of ZnO nanoparticals, were synthesized by using highly uniform and monodispersed Cu-embedded carbon spheres as sacrificial templates via a simple route under hydrothermal conditions. The morphology and structure of the spheres were characterized by FTIR, XRD, SEM, TEM and N{sub 2} adsorption-desorption. It was suggested that the OH and C=O groups in the surface of the Cu-embedded carbon spheres facilitated the adsorption of Zn{sup 2+} in the aqueous solution, giving rise to the final CuO-ZnO hollow structure after these Zn{sup 2+}-adsorbed spheres were calcined in air. Moreover, the photoluminescence (PL) study showed that the as-prepared CuO-ZnO hollow spheres and the annealed counterpart exhibited strong and dramatically weakened emissions, respectively. This remarkably different photoluminescent behavior afforded the evidence regarding the oxygen vacancy defects in the CuO-ZnO hollow spheres. - Graphical abstract: CuO-ZnO hollow spheres were obtained using Cu-embedded carbon spheres as template, and the photoluminescent spectra afforded the evidence regarding the oxygen vacancies in the hollow spheres. Highlights: Black-Right-Pointing-Pointer A approach was presented to prepare carbon spheres in a high yield. Black-Right-Pointing-Pointer The fabrication of CuO-ZnO hollow spheres was a simple route. Black-Right-Pointing-Pointer The photoluminescence afforded the evidence of the oxygen vacancies in the hollows. Black-Right-Pointing-Pointer The synthetic approach might be applicable to preparing other hollow structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

V{sub 2.38}Nb{sub 10.7}O{sub 32.7}: A V{sub 2}O{sub 5}-Nb{sub 2}O{sub 5} mixed oxide tunnel structure related to the tetragonal tungsten bronzes

A crystal structural model for the orthorhombic compound V{sub 2.38}Nb{sub 10.7}O{sub 32.7}, which is known as 'V{sub 2}Nb{sub 9}O{sub 27.5}', was developed by means of selected area electron diffraction (SAED), Rietveld refinement and high resolution electron microscopy (HREM). The metastable compound is obtained by thermal decomposition of freeze-dried precursors as chain-like agglomerated nanoparticles or by reaction of V{sub 2}O{sub 5} with fresh-precipitated Nb{sub 2}O{sub 5} as more compact micro-scaled crystals. With the latter, it was possible to identify its structure for the first time (space group Cmmm). The tetragonal tungsten bronze (TTB)-type structure shows high potential for ionic intercalation, since easily reducible [V{sup 5+}{sub 2}O{sup 2-}] units are implemented in the tunnels of a rigid niobium oxide framework. - Graphical abstract: A crystal structural model for the orthorhombic compound V{sub 2.38}Nb{sub 10.7}O{sub 32.7}, which is known as 'V{sub 2}Nb{sub 9}O{sub 27.5}', was developed by means of selected area electron diffraction, Rietveld refinement and high resolution electron microscopy. In dependence on the synthesis method the metastable compound is obtained as chain-like agglomerated nanoparticles or as more compact micro-scaled crystals. V{sub 2.38}Nb{sub 10.7}O{sub 32.7} is the first and only example of a compound with a TTB-type structure (space group Cmmm) in the system V{sub 2}O{sub 5}-Nb{sub 2}O{sub 5}.

36 MATERIALS SCIENCE↗

Relaxation of crystal lattice parameters and structural ordering in In{sub x}Ga{sub 1-x}As epitaxial alloys

Epitaxial In{sub x}Ga{sub 1-x}As/GaAs(100) heterostructures grown by the MOC-hydride method with a considerable lattice mismatch are studied by X-ray diffraction and scanning electron microscopy. The relaxation coefficient of the crystal lattice of the epitaxial alloy is calculated and the deformation energy is evaluated. It is shown that, at a concentration of the In atoms in metal sublattice close to x = 0.5, the superstructural phase formed on the surface of the epitaxial In{sub x}Ga{sub 1-x}As alloy is the InGaAs{sub 2} compound with a layered tetragonal crystal lattice and ordered arrangement of the atoms of the metal sublattice in the growth plane of the epitaxial film.

36 MATERIALS SCIENCE↗

Towards high-resolution ptychographic x-ray diffraction microscopy

Ptychographic x-ray diffraction microscopy is a lensless imaging technique with a large field of view and high spatial resolution, which is also useful for characterizing the wavefront of an x-ray probe. The performance of this technique is degraded by positioning errors due to the drift between the sample and illumination optics. We propose an experimental approach for correcting the positioning errors and demonstrate success by two-dimensionally reconstructing both the wavefront of the focused x-ray beam and the complex transmissivity of the weakly scattering objects at the pixel resolution of better than 10 nm in the field of view larger than 5 {mu}m. This method is applicable to not only the observation of organelles inside cells or nano-mesoscale structures buried within bulk materials but also the characterization of probe for single-shot imaging with x-ray free electron lasers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electromechanical properties of A-site (LiCe)-modified sodium bismuth titanate (Na{sub 0.5}Bi{sub 4.5}Ti{sub 4}O{sub 15}) piezoelectric ceramics at elevated temperature

The Aurivillius-type bismuth layer-structured (NaBi){sub 0.46}(LiCe){sub 0.04}Bi{sub 4}Ti{sub 4}O{sub 15} (NBT-LiCe) piezoelectric ceramics were synthesized using conventional solid-state processing. Phase analysis was performed by x-ray diffraction and microstructural morphology was assessed by scanning electron microscopy. The dielectric, piezoelectric, ferroelectric, and electromechanical properties of NBT-LiCe ceramics were investigated. The piezoelectric activities were found to be significantly enhanced compared to NBT ceramics, which can be attributed to the lattice distortion and the presence of bismuth vacancies. The dielectric and electromechanical properties of NBT-LiCe ceramics at elevated temperature were investigated in detail. The excellent piezoelectric, dielectric, and electromechanical properties, coupled with high Curie temperature (T{sub c}=660 deg. C), demonstrated that the NBT-LiCe ceramics are the promising candidates for high temperature applications.

36 MATERIALS SCIENCE↗

Use of Brazilian sugarcane bagasse ash in concrete as sand replacement

Sugarcane today plays a major role in the worldwide economy, and Brazil is the leading producer of sugar and alcohol, which are important international commodities. The production process generates bagasse as a waste, which is used as fuel to stoke boilers that produce steam for electricity cogeneration. The final product of this burning is residual sugarcane bagasse ash (SBA), which is normally used as fertilizer in sugarcane plantations. Ash stands out among agroindustrial wastes because it results from energy generating processes. Many types of ash do not have hydraulic or pozzolanic reactivity, but can be used in civil construction as inert materials. The present study used ash collected from four sugar mills in the region of Sao Carlos, SP, Brazil, which is one of the world's largest producers of sugarcane. The ash samples were subjected to chemical characterization, sieve analysis, determination of specific gravity, X-ray diffraction, scanning electron microscopy, and solubilization and leaching tests. Mortars and concretes with SBA as sand replacement were produced and tests were carried out: compressive strength, tensile strength and elastic modulus. The results indicated that the SBA samples presented physical properties similar to those of natural sand. Several heavy metals were found in the SBA samples, indicating the need to restrict its use as a fertilizer. The mortars produced with SBA in place of sand showed better mechanical results than the reference samples. SBA can be used as a partial substitute of sand in concretes made with cement slag-modified Portland cement.

09 BIOMASS FUELS↗

Crystal defects and related stress in Y{sub 2}O{sub 3} thin films: Origin, modeling, and consequence on the stability of the C-type structure

We study the impact that the crystal defects have on the C-type structure of rare earth sesquioxide thin films grown by ion-beam sputtering, through the example of Y{sub 2}O{sub 3}. By monitoring the energy of the argon beam used in the sputter deposition process (between 600 and 1200 eV), we show that it is possible to control the microstructure (defects concentration, stress state and phase) in the oxide layer. Two main types of defects, ascribed to the 'atomic peening effect', are evidenced by high-resolution transmission electron microscopy, Rutherford backscattering spectroscopy, and nuclear reaction analysis experiments: anti-Frenkel pairs, leading to a disorder on the oxygen-vacancy network, and oxygen-vacancy dislocations loops, to accommodate the strong nonstoichiometry. From a macroscopic measurement of the residual stresses in the as-deposited and the annealed layers, through x-ray diffraction and the sin{sup 2}{Psi} method, we have modeled the related stress state using an enhanced triaxial stress model. In the as-grown films, we evidence the coexistence of a biaxial and a hydrostatic stress, due to inclusions of atomic size defects. Quantitative information of the concentration and the nature of each type of defect (size effect) have also been determined, in good agreement with experiments. Interestingly, in the most energetic growth conditions corresponding to the highest degree of disorder on the oxygen-vacancy network and to the highest stress field in the film, we demonstrate that it is possible to stabilize an unexpected and metastable non equilibrium fluorite-like phase (X-type).

36 MATERIALS SCIENCE↗