Search NASA⌕ Search

SEARCH · Search NASA

Results for “dependence analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

A Thermal Analysis Approach for the Mars Odyssey Spacecraft's Solar Array

There are numerous challenges associated with placing a spacecraft in orbit around Mars. Often. trades must be made such as the mass of the payload and the amount of fuel that can be carried. One technique employed to more efficiently place a spacecraft in orbit while maximizing payload mass (minimizing fuel use) is aerobraking. The Mars Odyssey Spacecraft made use of aerobraking to gradually reduce its orbit period from a highly elliptical insertion orbit to its final science orbit. Aerobraking introduces its own unique challenges, in particular, predicting the thermal response of the spacecraft and its components during each aerobraking drag pass. This paper describes the methods used to perform aerobraking thermal analysis using finite element thermal models of the Mars Odyssey Spacecraft's solar array. To accurately model the complex behavior during aerobraking, the thermal analysis must be tightly coupled to the spatially varying, time dependent aerodynamic heating analysis. Also, to properly represent the temperatures prior to the start of the drag pass. the model must include the orbital solar and planetary heat fluxes. It is critical that the thermal behavior be predicted accurately to maintain the solar array below its structural flight allowable temperature limit. The goal of this paper is to describe a thermal modeling method that was developed for this purpose.

Dec, John A.↗

Temperature-Dependent Characterization, Modeling, and Switching Speed-Limitation Analysis of Third-Generation 10-kV SiC MOSFET

The temperature-dependent characteristics of the third-generation 10-kV/20-A SiC MOSFET including the static characteristics and switching performance are carried out in this paper. The steady-state characteristics, including saturation current, output characteristics, antiparallel diode, and parasitic capacitance, are tested. Here, a double pulse test platform is constructed including a circuit breaker and gate drive with >10-kV insulation and also a hotplate under the device under test for temperature-dependent characterization during switching transients. The switching performance is tested under various load currents and gate resistances at a 7-kV dc-link voltage from 25 to 125 C and compared with previous 10-kV MOSFETs. A simple behavioral model with its parameter extraction method is proposed to predict the temperature-dependent characteristics of the 10-kV SiC MOSFET. The switching speed limitations, including the reverse recovery of SiC MOSFET's body diode, overvoltage caused by stray inductance, crosstalk, heat sink, and electromagnetic interference to the control are discussed based on simulations and experimental results.

10-kV silicon carbide (SiC) metal–oxide–semiconduc↗

View-angle-dependent AIRS Cloudiness and Radiance Variance: Analysis and Interpretation

Upper tropospheric clouds play an important role in the global energy budget and hydrological cycle. Significant view-angle asymmetry has been observed in upper-level tropical clouds derived from eight years of Atmospheric Infrared Sounder (AIRS) 15 um radiances. Here, we find that the asymmetry also exists in the extra-tropics. It is larger during day than that during night, more prominent near elevated terrain, and closely associated with deep convection and wind shear. The cloud radiance variance, a proxy for cloud inhomogeneity, has consistent characteristics of the asymmetry to those in the AIRS cloudiness. The leading causes of the view-dependent cloudiness asymmetry are the local time difference and small-scale organized cloud structures. The local time difference (1-1.5 hr) of upper-level (UL) clouds between two AIRS outermost views can create parts of the observed asymmetry. On the other hand, small-scale tilted and banded structures of the UL clouds can induce about half of the observed view-angle dependent differences in the AIRS cloud radiances and their variances. This estimate is inferred from analogous study using Microwave Humidity Sounder (MHS) radiances observed during the period of time when there were simultaneous measurements at two different view-angles from NOAA-18 and -19 satellites. The existence of tilted cloud structures and asymmetric 15 um and 6.7 um cloud radiances implies that cloud statistics would be view-angle dependent, and should be taken into account in radiative transfer calculations, measurement uncertainty evaluations and cloud climatology investigations. In addition, the momentum forcing in the upper troposphere from tilted clouds is also likely asymmetric, which can affect atmospheric circulation anisotropically.

AIRS↗

Band or Polaron: The Hole Conduction Mechanism in the p-Type Spinel Rh 2ZnO4

Given the emerging role of oxide spinels as hole conductors, we discuss in this article the traditional vs. new methodologies of determining the type of conduction mechanism at play - localized polaronic vs. band-like transport. Applying (i) traditional small polaron analysis to our in-situ high temperature four-point conductivity and thermopower measurements, we previously found an activated mobility, which is indicative of the small polaron mechanism. However, (ii) employing the recent developments in correcting density functional methodologies for hole localization, we predict that the self-trapped hole is unstable and that Rh{sub 2}ZnO{sub 4} is instead a band conductor with a large effective mass. The hole mobility measured by high-field room temperature Hall effect also suggests band rather than polaron conduction. The apparent contradiction between the conclusion of the traditional procedure (i) and first-principles theory (ii) is resolved by taking into account in the previous transport analysis the temperature dependence of the effective density of states, which leads to the result that the mobility is actually temperature-independent in Rh{sub 2}ZnO{sub 4}. Our case study on Rh{sub 2}ZnO{sub 4} illustrates the range of experimental and theoretical approaches at hand to determine whether the transport mechanism of a semiconductor is band or small polaron conduction.

14 SOLAR ENERGY↗

Recent N* results from photoproduction experiments at CLAS

The recent breakthroughs in the technology of polarised targets have enabled a new generation of meson photo-production experiments to be carried out. A measurement of a full set of polarisation observables off both polarised proton and neutron targets and in a large number of meson-production channels has come within sight. Such a measurement would very significantly reduce model-dependence in the analysis of the data and thus has the potential to resolve long-standing issues, such as the 'missing resonance' problem, and shed new light on the nucleon excitation spectrum. This has formed the motivation for the recent N* experimental programme of CLAS.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Developing a Multiscale Test Approach for Characterizing Polymer Composites

A systematic series of experimental characterization efforts have been applied to a novel advanced fiber reinforced nanocomposite material composed of carbon fiber doped with carbon nanotubes in a thermoplastic polymer. A novel depositional process has been developed and refined in order to obtain homogeneous and isotropic dispersion of the CNTs onto the interfacial surface of interest. Fracture mechanics characterization efforts under Mode I and Mode II loading have been investigated to quantify critical strain energy release rate values and study the complex fracture processes. Finite element simulations have complimented the fracture analysis in order to elucidate mechanisms at work during the precipitation and propagation. Thermal analytical responses have been measured using differential scanning calorimetry and thermal gravimetric analysis, while temperature dependent viscoelastic properties have been characterized through variable amplitude dynamic mechanical analysis. Significant increases in the energy absorption characteristics during deformation and fracture behavior have been directly measured for this CNT enhanced material system. This CNT modified CFRP material shows extreme promise for improving interply adhesion and inhibiting delamination.

36 MATERIALS SCIENCE↗

Calculation of Moisture-Dependent, Anisotropic Parameters Supporting the Hanford Site's Composite Analysis, Cumulative Impact Evaluation, and Performance Assessments

Variable, moisture (tension) dependent anisotropy (MDA) in unsaturated soils is an effective, large-scale (macroscopic) flow property that results from media heterogeneities at a smaller scale. The purpose of this environmental calculation file (ECF) is to document the variable MDA calculations using a script routine. The accuracy of the script calculations are cross-checked against results using other software. Appendices for this ECF are Appendix A, which documents supporting script use; Appendix B, which provides supporting spreadsheet calculations; and Appendix C, which provides supporting utility calculations. The work is in support of vadose zone flow and transport models used in performance assessment (PA), composite analysis (CA), and cumulative impact evaluation (CIE) at the Hanford Site.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The polarization dependence of γγ absorption—implications for γ-ray bursts and blazars

This paper presents an analysis of the dependence of the opacity for high-energy γ-rays to γγ absorption by low-energy photons on the polarization of the γ-ray and target photons. This process has so far only been considered using the polarization-averaged γγ absorption cross section. It is demonstrated that in the case of polarized γ-ray emission, subject to source-intrinsic γγ absorption by polarized target photons, this may lead to a slight overestimation of the γγ opacity by up to ∼10% in the case of a perfectly ordered magnetic field. Thus, for realistic astrophysical scenarios with partially ordered magnetic fields, the use of the polarization-averaged γγ cross section is justified for practical purposes, such as estimates of minimum Doppler factors inferred for γ-ray bursts and blazars, based on γγ transparency arguments; this paper quantifies the small error incurred by the unpolarized-radiation approximation. Furthermore, it is shown that polarization-dependent γγ absorption of initially polarized γ-rays can lead to a slight increase in the polarization beyond the spectral break caused by γγ absorption. This amount is distinctly different from the change in polarization expected if the same spectral break were produced by a break in the underlying electron distribution. This may serve as a diagnostic of whether γγ absorption is relevant in sources such as γ-ray bursts and blazars where the γ-ray emission may be intrinsically highly polarized.

79 ASTRONOMY AND ASTROPHYSICS↗

Defect Parameters Contour Mapping: A Powerful Tool for Lifetime Spectroscopy Data Analysis

Temperature‐ and injection‐dependent lifetime spectroscopy (TIDLS) is extensively used for the characterization of defects in silicon material for photovoltaic applications. By coupling TIDLS measurements with Shockley–Read–Hall recombination models, the most important defects’ parameters can be assessed including the defect energy level E t and the capture cross section ratio k . However, while proving extremely helpful in a variety of studies aiming at the characterization of contaminated silicon, a generalized approach for the analysis of industrially‐relevant material has not yet emerged. In this contribution, we examine in detail the recently introduced defect parameters contour mapping (DPCM) methodology for TIDLS data analysis as a tool for direct visualization of possible lifetime limiting defects. Herein, we showcase the DPCM method's potential by applying it to two representative case studies selected from literature and we demonstrate that, even when data are scarce, invaluable information is obtained in an easy and intuitive way without any a priori assumption needed. We then apply the DPCM method to simulated TIDLS data to evaluate the general characteristics of its response and the optimal conditions for its application. This analysis proves that the temperature dependence of lifetime is the most critical information required toward a really univocal identification of metal impurities.

Bernardini, Simone↗

Search for a high-mass Higgs boson decaying to a W boson pair in pp collisions at √s = 8 TeV with the ATLAS detector

A search for a high-mass Higgs boson H is performed in the H→WW→ℓνℓν and H→WW→ℓνqq decay channels, using pp collision data corresponding to an integrated luminosity of 20.3 fb -1 , collected at √s = 8 TeV by the ATLAS detector at the Large Hadron Collider. No evidence of a high-mass Higgs boson is found. Limits on σ H ×BR(H→WW) as a function of the Higgs boson mass mH are determined in three different scenarios: one in which the heavy Higgs boson has a narrow width compared to the experimental resolution, one a width increasing with the boson mass and modeled by the complex-pole scheme following the same behavior as in the Standard Model, and one for intermediate widths. The upper range of the search is m H =1500 GeV for the narrow-width scenario and m H =1000 GeV for the other two scenarios. The lower edge of the search range is 200-300 GeV and depends on the analysis channel and search scenario. For each scenario, individual and combined limits from the two WW decay channels are presented. At mH=1500 GeV, the highest mass point tested, σ H ∙BR(H→WW) for a narrow-width Higgs boson is constrained to be less than 22 fb and 6.6 fb at the 95% CL for the gluon fusion and vector-boson fusion production modes, respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Computer modeling of pulsed CO2 lasers for lidar applications

The experimental results will enable a comparison of the numerical code output with experimental data. This will ensure verification of the validity of the code. The measurements were made on a modified commercial CO2 laser. Results are listed as following. (1) The pulse shape and energy dependence on gas pressure were measured. (2) The intrapulse frequency chirp due to plasma and laser induced medium perturbation effects were determined. A simple numerical model showed quantitative agreement with these measurements. The pulse to pulse frequency stability was also determined. (3) The dependence was measured of the laser transverse mode stability on cavity length. A simple analysis of this dependence in terms of changes to the equivalent fresnel number and the cavity magnification was performed. (4) An analysis was made of the discharge pulse shape which enabled the low efficiency of the laser to be explained in terms of poor coupling of the electrical energy into the vibrational levels. And (5) the existing laser resonator code was changed to allow it to run on the Cray XMP under the new operating system.

Spiers, Gary D.↗

Seebeck Coefficients of Layered BiCuSeO Phases: Analysis of Their Hole-Density Dependence and Quantum Confinement Effect

Hole-doped layered BiCuSeO phases include substitutionally doped Bi 1–x AxCuSeO (A = alkali, alkaline earth) as well as vacancy-doped Bi 1-δ Cu 1-γ SeO and Bi 1-δ CuSeO. To probe how their Seebeck coefficients are related to their hole density p, we calculated the Seebeck coefficient for defect-free BiCuSeO as a function of the hole density, which is generated by lowering the Fermi level from the valence band maximum (VBM). In addition, we calculated the Seebeck coefficient for Bi 1-δ CuSeO (δ = 1/32, 1/16) with a large number of Bi vacancies. The Seebeck coefficients of the hole-doped BiCuSeO phases are governed by the electronic states lying within ~0.5 eV from the VBM. These states are composed of largely Cu 3d xz/yz and Se 4p x/y states and possess the character of a uniform one-dimensional (1D) chain rather than a uniform two-dimensional (2D) lattice expected for a layered phase. The observed S-vs-p relationship for Bi 1–x A x CuSeO (A = alkali, alkaline earth) as well as Bi 1-δ Cu 1-γ SeO (δ = 0, 0.025; γ = 0, 0.025) and Bi 1-δ CuSeO (δ = 0.0, 0.025) is very well reproduced by the calculated relationship for defect-free BiCuSeO within the rigid band approximation. The observed S-vs-p relationship reflects the quantum confinement effect of uniform 1D chains, despite that the hole-doped BiCuSeO phases consist of 2D layers, (Cu 2 Se 2 ) 2– and (Bi 2 O 2 ) 2+ . The drastic decrease in the S values of Bi 1-δ CuSeO with large δ (= 0.05, 0.075, 0.10) arises from the loss of the quantum confinement effect in the (Cu 2 Se 2 ) 2– layers; that is, the uniform 1D chain character is lost because of their geometry distortion induced by a large number of Bi vacancies.

Lee, Changhoon↗

A systematic investigation into the extraction of aluminum from coal spoil through kaolinite

This research has applied kaolin and active carbon (AC) to the investigation of the recovery of aluminium from coal spoil (CS). The kaolin, AC-containing kaolin mixture, and CS have been calcined at 500, 600, 700, 800, and 900{degree}C for 15, 30, 60, and 120 min. The transformation of kaolinite and aluminium extraction that occurred in each calcined sample have been characterized using XRD, TG, IR, and hydrochloric acid leaching methods. The dehydroxylation of kaolinite and the decomposition of metakaolin were influenced by thermal treatment temperature and time. The metakaolin had kept a portion of OH- in its structure until it was calcined at a temperature of 800{degree}C. Under 60 min treatment, new SiO{sub 2} phase was able to be formed at 500{degree}C, kaolinite was totally converted to metakaolin at 600{degree}C, and the SiO{sub 2} rejoined the reaction at 800{degree}C. The decompositions of CS were similar to those of kaolin mixture containing 20 wt % AC (MKC). The combustion of combustible matter accelerated the decomposition of kaolinite in the CS and MKC. Higher AC content led to lower aluminum extraction. The treatment at 600{degree}C was optimal for both CS and MKC. 28 refs., 7 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Systematic multi-machine analysis of the exhaust time-dependent behavior in tokamaks

The understanding of the time-scales and associated transient behavior of fusion exhaust plasmas plays a crucial role in its dynamic modeling and its control. This work presents an overview of experimental investigations of the exhaust dynamics in TCV, MAST-U, ASDEX-Upgrade, WEST, DIII-D, and JET. From the presented experiments, a clear picture arises on properties of the exhaust dynamics across machines. Particularly, we observe that the scrape-off layer equilibrates on fast time-scales ($>$ 70 Hz) and that exhaust dynamics measured in response to gas valve modulations mostly behave smoothly and linearly, with similarities across devices, across scenarios (H-mode, L-mode), injected species, and injection locations. The measurements presented have formed the basis for systematic exhaust control on the considered devices. We now present this database for the essential validation of dynamic exhaust models for reactor design and control.

control↗

It Depends - An Overview of Probabilistic Risk Analysis Concepts

How do you understand the data and assumptions in your probabilistic analysis? The PRA analyst needs to understand the data and input assumptions to effectively communicate the system/mission's risks. The decision maker also needs to understand conservatisms and how to interpret uncertainty in the PRA results. Properties such as assumptions on the distributions, uncertainty, use of test data, and common cause modeling can be the subject of much discussion, but often are the leading drivers of a risk profile.

risk assessment↗

An Analysis of the Temperature and Field Dependence of the RF Surface Resistance of Nitrogen-Doped Niobium SRF Cavities with Respect to Existing Theoretical Models

Recent progress with the reduction of rf surface resistance (R s ) of niobium SRF cavities via the use of high temperature surface doping by nitrogen has opened a new regime for energy efficient accelerator applications. For particular doping conditions one observes dramatic decreases in R s with increasing surface magnetic fields. The observed variations as a function of temperature may be analyzed in the context of recent theoretical treatments in hopes of gaining insight into the underlying beneficial mechanism of the nitrogen treatment. Systematic data sets of Q 0 vs. E acc vs. temperature acquired during the high Q 0 R&D work of the past year will be compared with theoretical model predictions..

43 PARTICLE ACCELERATORS↗