Search NASA⌕ Search

SEARCH · Search NASA

Results for “distance map”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

A tale of a tail: a tidally disrupting ultra-diffuse galaxy in the M81 group

ABSTRACT We present the discovery of a giant tidal tail of stars associated with F8D1, the closest known example of an ultra-diffuse galaxy (UDG). F8D1 sits in a region of the sky heavily contaminated by Galactic cirrus and has been poorly studied since its discovery two decades ago. The tidal feature was revealed in a deep map of resolved red giant branch stars constructed using data from our Subaru Hyper Suprime-Cam survey of the M81 Group. It has an average surface brightness of μg ∼ 32 mag arcsec−2 and can be traced for over a degree on the sky (60 kpc at the distance of F8D1) with our current imagery. We revisit the main body properties of F8D1 using deep multiband imagery acquired with MegaCam on CFHT and measure effective radii of 1.7–1.9 kpc, central surface brightnesses of 24.7–25.7 mag, and a stellar mass of ∼7 × 107M⊙. Assuming a symmetric feature on the other side of the galaxy, we calculate that 30–36 per cent of F8D1’s present-day luminosity is contained in the tail. We argue that the most likely origin of F8D1’s disruption is a recent close passage to M81, which would have stripped its gas and quenched its star formation. As the only UDG that has so far been studied to such faint surface brightness depths, the unveiling of F8D1’s tidal disruption is important. It leaves open the possibility that many other UDGs could be the result of similar processes, with the most telling signatures of this lurking below current detection limits.

Žemaitis, Rokas (ORCID:0000000285660491)↗

A reinterpretation of millimeter observations of nearby IRAS excess stars

We analyze new and previously published 1300, 870, and 800 micrometers, single-element bolometer observations of Vega (alpha Lyr), Formalhaut (alpha PsA), epsilon Eri, tau(sup1) Eri, and Beta Leo. We show that these data are consistent with models in which the dust disks around these stars are larger than the radio telescope beams with which they were observed; thus, these disks may be many hundreds of AU in radius or larger. Our interpretation of submillimeter/millimeter measurements of these stars also indicates that for some Infrared Astronomy Satellite (IRAS) IR excess stars the assumption that there is no astrophysical flux in the OFF beams, when using the standard ON-minus-OFF chopping technique and the chop distance is less than 1000AU, may be incorrect. Therefore, for IRAS IR excess stars within approximately 20 pc, virtually all submillimeter/millimeter chopping observations with chop throws less than 100" may have subtracted away some or most of the flux associated with their circumstellar disks. Finally, we present new 1300 micrometers continuum observations of Vega made with chop throws of 500 and 1000 AU. These data are consistent with an interpretation in which Vega has a disk that is at least 1000AU in radius; this disk could have a region with much less material per beam area near 500 AU than at both 100 AU and 1000 AU, corresponding to a gap at the orbital distance of alpha Lyr B. The observations of Vega are also consistent with the assumption that the circumVega dust structure is unresolved. Thus, these new data very effectively illustrate that the 'standard' model of small, unresolved, dust structures around main-sequence IRAS IR excess stars is not unique. Maps of IRAS IR excess stars, which soon will be available from submillimeter/millimeter array detectors, will determine whether the paradigm shift we propose will occur.

Weintraub, David A.↗

High altitude molecular clouds

A population of molecular clouds with a significantly greater scale height than that of giant molecular clouds (GMCs) has been identified by examining maps of the latitude distribution of the (12)CO(1 - 0) emission in the first quadrant of the Galaxy. These clouds are found by identifying emission more than 2.6 times the scale-height away from the Galactic midplane (centroid of CO emission) at the tangent points. Since the distance to the tangent points is known, we know the heights and the sizes of these clouds. They are smaller and fainter than the GMCs and do not seem to be gravitationally bound. These clouds have properties similar to the high-latitude clouds in the solar neighborhood. Although they lie outside the molecular cloud layer, the high-altitude clouds are well within the H I layer in the Galaxy and coincide with distinct peaks in the H I distribution. These clouds represent a Galaxy-wide population of small molecular clouds having a larger scale height. They may be clouds in transition between molecular and atomic phases.

Malhotra, Sangeeta↗

Calibration and Initial Results of Space Radiation Dosimetry Using the iMESA-R

The integrated Miniaturized Electrostatic Analyzer-Reflight (iMESA-R) is a space weather instrument designed to measure plasma density, temperature, and spacecraft charging, along with total ionizing dose and dose rate. A constellation consisting of five nearly identical instruments has been designed and developed to act as science payloads hosted on-board Department of Defense satellites operating in low-Earth orbit. To validate the dosimetry component of the iMESA-R, a radiation test study was performed to calibrate the dosimeter and ascertain the attenuation due to the instrument aluminum housing. An 80 curie Cobalt-60 radioisotope source emitting beta, X-ray, and gamma ray radiation decay products was used to calibrate the dosimeter response as a function of distance and instrument shielding. We present results of the calibration study along with initial on-orbit data presented from the first operational iMESA-R hosted on-board Space Test Program Satellite 5 in a polar Earth orbit. The initial on-orbit data demonstrate the ability to map the radiation environment, particularly the South Atlantic Anomaly and the auroral regions using total ionizing dose rate due to electrons of E > 1.5 MeV and protons of E > 25 MeV.

79 ASTRONOMY AND ASTROPHYSICS↗

Spatial Distribution of Ultraviolet Emission from Cometary Activity at 67P/Churyumov-Gerasimenko

The Alice ultraviolet spectrograph on board the Rosetta orbiter provided the first near-nucleus ultraviolet observations of a cometary coma from arrival at comet 67P/Churyumov-Gerasimenko in 2014 August through 2016 September. The characterization of atomic and molecular emissions in the coma revealed the unexpected contribution of dissociative electron impact emission at large heliocentric distances and during some outbursts. This mechanism also proved useful for compositional analysis, and Alice observed many cases that suggested elevated levels of the supervolatile O{sub 2}, identifiable in part to their emissions resulting from dissociative electron impact. In this paper, we present the first two-dimensional UV maps constructed from Alice observations of atomic emission from 67P during an increase in cometary activity on 2015 November 7–8. Comparisons to observations of the background coma and an earlier collimated jet are used to describe possible changes to the near-nucleus coma and plasma. To verify the mapping method and place the Alice observations in context, comparisons to images derived from the MIRO and VIRTIS-H instruments are made. The spectra and maps we present show an increase in dissociative electron impact emission and an O{sub 2}/H{sub 2}O ratio of ~0.3 for the activity; these characteristics have been previously identified with cometary outbursts seen in Alice data. Further, UV maps following the increases in activity show the spatial extent and emission variation experienced by the near-nucleus coma, informing future UV observations of comets that lack the same spatial resolution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High latitude H I shells in the Galaxy. I

A search has been made for H I shells in the 21-cm maps made by Heiles and Habing (1974) for absolute values of galactic latitude greater than 10 deg. A filter in the velocity dimension was used to enhance shell features over background gas. Positions, expansion velocities, column densities, and angular extents were measured for the 50 shells that were discovered. Incorporating distance estimates, masses and kinetic energies were estimated for the shells. A striking result was the failure of swept-up matter in a standard model for gas in the disk (density at the midplane approximately 1/cu cm; exponential scale height approximately 130 pc) to reproduce the observed shell column densities. While measured shell densities may be insufficiently corrected for background gas, the magnitude of this effect is too large to be explained by such a discrepancy alone. This may suggest that the shells seen in this survey occur in regions of relatively high density. The distribution of H I shells was compared with the distribution of other large-scale features in the Galaxy: H I shell structures are found to correlate with the positions of radio continuum loops I, II, and III, and to show little relation to the distribution of O and B stars.

Hu, E. M.↗

Fiber-Optic Electric-Field Meter

Sensor for measuring electric-field strength does not greatly alter field in which placed. Sensor used to map fields in electric power substation or under high-voltage transmission line. Also used for laboratory measurements. Fused-silica fibers guide light from source to photometer. Light emerges from tip of source fiber, passes through curved coupler, and enters tip of photometer fiber. Attenuation of coupler changes with distance between fiber tips.

Johnston, A. R.↗

Universal binding energy relations in metallic adhesion

Rose, Smith, and Ferrante have discovered scaling relations which map the adhesive binding energy calculated by Ferrante and Smith onto a single universal binding energy curve. These binding energies are calculated for all combinations of Al(111), Zn(0001), Mg(0001), and Na(110) in contact. The scaling involves normalizing the energy by the maximum binding energy and normalizing distances by a suitable combination of Thomas-Fermi screening lengths. Rose et al. have also found that the calculated cohesive energies of K, Ba, Cu, Mo, and Sm scale by similar simple relations, suggesting the universal relation may be more general than for the simple free electron metals for which it was derived. In addition, the scaling length was defined more generally in order to relate it to measurable physical properties. Further this universality can be extended to chemisorption. A simple and yet quite accurate prediction of a zero temperature equation of state (volume as a function of pressure for metals and alloys) is presented. Thermal expansion coefficients and melting temperatures are predicted by simple, analytic expressions, and results compare favorably with experiment for a broad range of metals.

Ferrante, J.↗

Remote Sensing by Spaceborne Lidar Aided by Surface Returns

Spaceborne lidar offers the possibility of global mapping of clouds and atmospheric aerosols. Mapping of cloud-top heights, multiple layers of thin clouds and the depth of the planetary boundary layer (PBL), given sufficient aerosols, are applications that should be fairly easy to accomplish from space with even a modest lidar system. However, the constraints imposed on spaceborne lidar by large ranging distances, limited available power/weight, and fast moving platforms present significant challenges to achieving more quantitative retrievals such as extracting aerosol extinction profiles, PBL optical depths and cloud optical depths. Ways to take advantage of the strong signals available from ground/sea reflections to improve upon atmospheric aerosol and cloud retrievals as well as to distinguish certain surface types are explored.

Reagan, J. A.↗

Studies of extra-solar Oort Clouds and the Kuiper disk

In 1991 we detected extended 1.1 mm emission around Fomalhaut (alpha PsA) at distances in order of magnitude beyond previous detections. This emission is plausibly related to the presence of an extended comet cloud, like our Oort Cloud, and may therefore represent indirect evidence for the formation of a planetary system at Fomalhaut. We propose now to extend this work to create a map of the angular and spatial extent of this emission. Fomalhaut is the only known main-sequence, submm-resolved IR excess source besides beta Pic.

Stern, S. Alan↗

Analysis of Heat Transfer from Local Heating and Cooling Sources at Cryogenic Temperatures

Understanding the dispersion of heat around a cryogenic fluid tank, specifically the interaction between the cryogenic fluid and the tank wall is critical in the analysis of long duration cryogen storage in microgravity. The heat transfer interaction between a cryogenic storage tank and heat sources from external spacecraft structures is also one of the many factors that determine how much heat enters a tank. Recent flight experiments with two-phase fluids have indicated that local concentrations of heat input (also known as “hot spots”) can cause unwanted affects including local boiling. Computational fluid dynamic (CFD) models can provide a detailed assessment of the heat transfer occurring across a cryogenic storage system. However, CFD modeling takes time to construct and run. A simpler approach that can act as initial guidance for later CFD modeling analyzes external “hot spots” as point or finite heat sources. A radial, finite element network or a local direct solution can effectively estimate the heat spread across a cryogenic storage tank by calculating the temperature and heat load as a function of distance from the heat source. This calculation accounts for the convective heat transfer between the cryogenic fluid and storage tank surface. Similar approaches can be used to determine the effectiveness of cooling from a cryocooler as a finite, local heat sink. This approach allows for quick approximations of the thermal map across a cryogenic tank as well as sensitivity analysis under a wide range of design parameters including gravitational fields as implied through natural convection coefficients.

Cryogenic Fluid Management↗

CH3OH and HCN in Interstellar Comet 3I/ATLAS Mapped with the ALMA Atacama Compact Array: Distinct Outgassing Behaviors and a Remarkably High CH3OH/HCN Production Rate Ratio

We report the detection of methanol (CH3OH) toward interstellar comet 3I/ATLAS using the At-acama Compact Array of the Atacama Large Millimeter/Submillimeter Array (ALMA) on UT 2025 August 28, September 18 and 22, and October 1, and of hydrogen cyanide (HCN) on September 12 and 15. These observations spanned pre-perihelion heliocentric distances (r H ) of 2.6 – 1.7 au. The molecules showed outgassing patterns distinct from one another, with HCN production being depleted in the sunward hemisphere of the coma, whereas CH3OH was enhanced in that direction. Statistical analysis of molecular scale lengths in 3I/ATLAS indicated that CH3OH included production from coma sources at Lp > 258 km at 99% confidence. However low signal-to-noise on long baselines, which sample emission on small spatial scales closest to the nucleus, prevented definitively ruling out CH3OH as purely a parent species. In contrast, HCN production was indistinguishable from direct nucleus sublimation. The CH3OH production rate increased sharply from August through October, including an uptick near the inner edge of the H2O sublimation zone at rH = 2 au. Compared to comets measured to date at radio wavelengths, the derived CH3OH/HCN ratios in 3I/ATLAS of 124+30−34 and 79+11−14on September 12 and 15, respectively, are among the most enriched values measured in any comet, surpassed only by anomalous solar system comet C/2016 R2 (PanSTARRS)

Comae↗

A new trajectory concept for exploring the earth's geomagnetic tail

An innovative trajectory technique for a magnetotail mapping mission is described which can control the apsidal rotation of an elliptical earth orbit and keep its apogee segment inside the tail region. The required apsidal rotation rate of approximately 1 deg/day is achieved by using the moon to carry out a prescribed sequence of gravity-assist maneuvers. Apogee distances are alternately raised and lowered by the lunar-swingby maneuvers; several categories of the 'sun-synchronous' swingby trajectories are identified. The strength and flexibility of the new trajectory concept is demonstrated by using real-world simulations showing that a large variety of trajectory shapes can be used to explore the earth's geomagnetic tail between 60 and 250 R sub E.

Farquhar, R. W.↗

Microarcsecond proper motions of extragalactic water vapor masers in M33

A second-epoch spectral line VLBI synthesis map of the H2O maser associated with the H II region IC 133 in the galaxy M33 is presented. Thirty-two spatially distinct maser features were identified, and a second center of maser activity within the IC 133 complex, IC 133 West, which is displaced about 0.3 arcsec from IC 133 Main, was discovered. A comparison of the two available maps of IC 133 is used to estimate the right ascension components of proper motion over a period of 479 d for five maser features to accuracies of between 7 and 16 micro-as. The dispersions in transverse and radial velocities for the maser features are consistent with the accepted distance to M33 of 720 kpc, where the data admit a fractional uncertainty in distance of 50 percent.

Greenhill, L. J.↗

Topographic Evidence for Eruptive Style Changes and Magma Evolution of Small Plains-style Volcanoes on Earth and Mars

Topographic profiles and surface characteristics of small (5 - 25 km diameter) plains-style shield volcanoes on the eastern Snake River Plain (ESRP) provide a method to evaluate eruptive processes and magmatic evolution on Martian volcanic plains. The ESRP is an ideal place to observe Mars-like volcanic features where hundreds of small monogenetic basaltic shields dominate the volcanic-sedimentary depositional sequence, and numerous planetary analogues are evident: coalescent mafic shields, hydromagmatic explosive eruptions, the interaction of lava flows with surficial water and glacial ice, and abundant eolian sand and loess. Single flows cannot be correlated over great distances, and are spatially restricted. These relations are useful for planetary exploration when inferring volcanic evolutionary patterns in lava plains represented by numerous eruptive vents. High spatial resolution imagery and digital topographic data for Mars from MOC, MOLA, and THEMIS is allowing for improvements in the level of detail of stratigraphic mapping of fields of small (< 25 km in diameter) volcanoes as well as studies of the morphological characteristics of individual volcanoes. In order to compare Mars and Earth volcanic features, elevation data from U.S.G.S. 10-meter digital elevation models (DEMs) and high-precision GPS field measurements are used in this study to generate approx. 20m spacing topographic profiles from which slope and surface morphology can be extracted. Average ESRP flank and crater slopes are calculated using 100 - 200 m spacing for optimum comparison to MOLA data, and to reduce the effects of surface irregularities.

Hughes, S. S.↗

Use of Remote Sensing/Geographical Information Systems (RS/GIS) to Identify the Distributional Limits of Soil-Transmitted Helminths (STHs) and Their Association to Prevalence of Intestinal Infection in School-Age Children in Four Rural Communities in Boaco, Nicaragua

STHs can infect all members of a population but school-age children living in poverty are at greater risk. Infection can be controlled with drug treatment, health education and sanitation. Helminth control programs often lack resources and reliable information to identify areas of highest risk to guide interventions and to monitor progress. Objectives: To use RS/GIS to identify the environmental variables that correlate with the ecology of STHs and with the prevalence of STH infections. Methods: Geo-referenced in situ prevalence data will be overlaid over an ecological map derived from the RS environmental data using ESRI s ArcGIS 9.3. Prevalence data and RS environmental data matching at the same geographical location will be analyzed for correlation and those RS environmental variables that better correlate with prevalence data will be included in a multivariate regression model. Temperature, vegetation, and distance to bodies of water will be inferred using data from the Moderate-Resolution Imaging Spectroradiometer (MODIS) onboard the Terra and Aqua satellites, and Thematic Mapper (TM) and Enhance Thematic Mapper Plus (ETM+) satellite sensors onboard Landsat 5 and Landsat 7 respectively. Elevation will be estimated with data from The Shuttle Radar Topography Mission (SRTM). Prevalence and intensity of infections will be determined by parasitological survey (Kato Katz) of children enrolled in rural schools in Boaco, Nicaragua, in the communities of El Roblar, Cumaica Norte, Malacatoya 1, and Malacatoya 2). Expected Results: Associations between RS environmental data and prevalence in situ data will be determined and their applications to public health will be discussed. Discussion/Conclusions: The use of RS/GIS data to predict the prevalence of STH infections could be useful for helminth control programs, providing improved geographical guidance of interventions while increasing cost-effectiveness. Learning Objectives: (1) To identify the RS environmental variables that can help predict the prevalence of STH infections. (2) To understand potential applications of RS/GIS to national helminth control programs. (3) To asses the applicability of RS/GIS to control STH infections.

Moreno, Max J.↗

A Super-Resolution Laser Altimetry Concept

A super-resolution laser altimetry technique has been proposed to provide improved lidar altimetry from Cloud Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) lidar data, and it is applicable to other similar atmospheric profiling lidar with low-pass filters. To achieve high altimetry resolution, the new technique relies on an empirical relationship between the peak signal ratio and the distance between land surface and the peak signal range bin center, which is directly derived from the CALIPSO lidar measurements and does not require the CALIPSO's transient response. The CALIPSO surface elevation results in Northern America retrieved by the new technique agree with the National Elevation Database high resolution elevation maps, and the comparisons suggest that the precision of the technique is much better than 1.4 m. The preliminary data product of land surface elevation retrieved by the new technique from CALIPSO lidar measurements is available to the altimetry community for evaluation.

Lu, Xiaomei↗

Inferring the Energy and Distance Distributions of Fast Radio Bursts Using the First CHIME/FRB Catalog

Abstract Fast radio bursts (FRBs) are brief, energetic, typically extragalactic flashes of radio emission whose progenitors are largely unknown. Although studying the FRB population is essential for understanding how these astrophysical phenomena occur, such studies have been difficult to conduct without large numbers of FRBs and characterizable observational biases. Using the recently released catalog of 536 FRBs published by the Canadian Hydrogen Intensity Mapping Experiment/Fast Radio Burst (CHIME/FRB) collaboration, we present a study of the FRB population that also calibrates for selection effects. Assuming a Schechter function, we infer a characteristic energy cut-off of E char = 2.38 − 1.64 + 5.35 × 10 41 erg and a differential power-law index of γ = − 1.3 − 0.4 + 0.7 . Simultaneously, we infer a volumetric rate of [ 7.3 − 3.8 + 8.8 (stat.) − 1.8 + 2.0 ( sys . ) ] × 10 4 Gpc −3 yr −1 above a pivot energy of 10 39 erg and below a scattering timescale of 10 ms at 600 MHz, and find we cannot significantly constrain the cosmic evolution of the FRB population with star-formation rate. Modeling the host’s dispersion measure (DM) contribution as a log-normal distribution and assuming a total Galactic contribution of 80 pc cm −3 , we find a median value of DM host = 84 − 49 + 69 pc cm −3 , comparable with values typically used in the literature. Proposed models for FRB progenitors should be consistent with the energetics and abundances of the full FRB population predicted by our results. Finally, we infer the redshift distribution of FRBs detected with CHIME, which will be tested with the localizations and redshifts enabled by the upcoming CHIME/FRB Outriggers project.

79 ASTRONOMY AND ASTROPHYSICS↗