Search NASA⌕ Search

SEARCH · Search NASA

Results for “graphite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Tribocorrosion of stainless steel sliding against graphite in FLiNaK molten salt

The molten salt reactor (MSR) concept recently gained renewed interest in developing Generation IV nuclear reactors. One MSR design uses fluoride molten salts to cool tri-structural isotropic particle fuel encapsulated by a carbon matrix into spherical pebbles, which would inevitably contact the reactor's stainless steel container wall during salt circulation. Characterizing this interaction is crucial for reactor safety. Here, in this work, we report the tribocorrosion behavior of graphite sliding against Type 316H stainless steel lubricated by a FLiNaK (LiF:NaF:KF; 46.5:11.5:42 mol %) molten salt in an argon environment. Accelerated wear loss was observed at a higher temperature because of a lower molten salt viscosity and a higher corrosion rate. The graphite had a more rapid material loss at a higher sliding speed than stainless steel because of its higher vulnerability to vibration-induced microfracture. The salt-starved condition caused more material loss than either the no-salt or the salt-flooded condition because neither a graphite transfer film nor stable boundary lubrication could be established at salt starvation. An interesting dual-layer surface film was discovered on the stainless steel worn surface: a chromium-rich top film and a nickel-accumulated but chromium-depleted interlayer. The film composition and structure provide fundamental insights to the mechanochemical interactions between stainless steel and graphite in a molten salt environment.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Phonon Dispersion Relation of Bulk Boron-Doped Graphitic Carbon

In this work, bulk turbostratic graphitic carbon of varying levels of disorder and chemical compositions has been synthesized by a direct synthesis method in the temperature range of 750–1100 °C, with a focus on boron incorporation within the graphitic lattice. The atomistic and electronic/vibrational structures were characterized by X-ray diffraction, energy-dispersive X-ray spectroscopy, Auger electron spectroscopy, X-ray absorption spectroscopy, and Raman spectroscopy. The phonon dispersion relation of graphitic carbon was found to be uniquely sensitive to substitutional boron doping, which perturbs the phonon structure while leaving the lattice structure unchanged. The dispersion relation of the D peak measured by Raman spectroscopy can be used to uniquely identify bulk graphitic materials containing a large content of ordered trigonal planar g-BC 3 units, which are of high interest in applications ranging from hydrogen storage to lithium-ion batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Grain Boundary-Limited Thermal Transport in Suspended Thin Graphite across an Unexplored Thickness Regime

Here, we present systematic thermal conductivity (κ) measurements of suspended thin graphite ribbons, 234–527 nm thick, using a four-probe 3ω method. Unlike recent reports of phonon hydrodynamics and exceptionally high κ in micrometer-thick graphite ( Science, 2020), we observe significantly lower κ and no signatures of collective phonon flow in this intermediate thickness regime. Instead, our measured κ lies between few-layer graphene and bulk graphite. These results agree with a first-principles-informed Peierls–Boltzmann transport model with spatially resolved Monte Carlo sampling. Additionally, the temperature for the peak κ shifts lower with increasing thickness, due to the interplay of phonon-boundary and phonon-isotope scattering. Incorporating grain boundary scattering into simulations is necessary to replicate the experimental trends. These findings delineate the boundary between ballistic, hydrodynamic, and diffusive transport regimes in graphite and underscore the dominant role of disorder and geometry in phonon transport in quasi-two-dimensional materials, offering insights for nanoscale thermal management.

Boltzmann transport model↗

Effect of Fluoroethylene Carbonate Additives on the Initial Formation of the Solid Electrolyte Interphase on an Oxygen-Functionalized Graphitic Anode in Lithium-Ion Batteries

The formation of a solid electrolyte interphase (SEI) at the electrode/electrolyte interface substantially affects the stability and lifetime of lithium-ion batteries (LIBs). One of the methods to improve the lifetime of LIBs is by the inclusion of additive molecules to stabilize the SEI. To understand the effect of additive molecules on the initial stage of SEI formation, in this work we compare the decomposition and oligomerization reactions of a fluoroethylene carbonate (FEC) additive on a range of oxygen-functionalized graphitic anodes to those of an ethylene carbonate (EC) organic electrolyte. A series of density functional theory (DFT) calculations augmented by ab initio molecular dynamics (AIMD) simulations reveal that EC decomposition on an oxygen-functionalized graphitic ($11\bar{2}0$) edge facet through a nucleophilic attack on an ethylene carbon site (C E ) of an EC molecule (S2 mechanism) is spontaneous during the initial charging process of LIBs. However, decomposition of EC through a nucleophilic attack on a carbonyl carbon (C C ) site (S1 mechanism) results in alkoxide species regeneration that is responsible for continual oligomerization along the graphitic surface. In contrast, FEC prefers to decompose through an S1 pathway, which does not promote alkoxide regeneration. Including FEC as an additive is thus able to suppress alkoxide regeneration and results in a smaller and thinner SEI layer that is more flexible toward lithium intercalation during the charging/discharging process. In addition, we find that the presence of different oxygen functional groups at the surface of graphite dictates the oligomerization products and the LiF formation mechanism in the SEI.

25 ENERGY STORAGE↗

Versatile Graphitized Carbon Nanofibers in Energy Applications

Graphitized carbon nanofibers (CNFs) are the allotropic forms of carbon that offer exceptional electrical conductivity, high aspect ratio, large surface-to-volume ratio, flexibility, mechanical robustness, and structural stability. These properties render CNFs as useful materials in energy applications, including water electrocatalysis and electrochemical energy storage devices (EESDs). Graphitized CNFs manifest huge versatility in EESDs and have been employed as electrode materials, as supports for other electrode materials, and conductive additives. This perspective summarizes the production methods, structural aspects, and energy applications of graphitized CNFs. Different design strategies have been employed to produce CNFs with diverse and distinct morphologies and structures. Their fabrication methods, along with precursors and dopants or cocatalysts, impact the overall structural, functional, and topographical properties. Recent developments on the state-of-the-art interests of graphitic CNFs in lithium-ion batteries (LIBs), lithium–sulfur (Li–S) batteries, vanadium redox flow batteries (VRFBs), supercapacitors, and water splitting have explored the many possibilities in energy sectors. Finally, the assembly and functioning of CNFs in water splitting and EESDs as well as primary challenges are discussed in this perspective.

36 MATERIALS SCIENCE↗

In situ X-ray Diffraction Study of Graphitic Carbon Formed During Heating and Cooling of Amorphous-C/Ni bilayers

We examine graphitization of amorphous carbon (a-C) in a-C/Ni bilayer samples having the structure Si/SiO{sub 2}/a-C(3-30 nm)/Ni(100 nm). In situ x-ray diffraction (XRD) measurements during heating in He at 3 C/s to 1000 C showed graphitic C formation beginning at temperatures T of 640-730 C, suggesting graphitization by direct metal-induced crystallization, rather than by a dissolution/precipitation mechanism in which C is dissolved during heating and expelled from solution upon cooling. We also find that graphitic C, once formed, can be reversibly dissolved by heating to T > 950 C, and that nongraphitic C can be volatilized by annealing in H{sub 2}-containing ambients.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Molecular dynamics simulation of energy exchanges during hydrogen collision with graphite sheets

Experiments show that the energy of particles incident on divertor plates in fusion devices seldom exceeds 100 eV. Trim code and its variants are not suitable to predict the sputtering yield of carbon-based divertor plates for this energy range and, therefore, a dynamic model, taking into account the C-H bond formation and breaking, and the structure of carbon, is needed. In this paper, the molecular dynamics method is employed to investigate collision processes between incident hydrogen atoms and a graphene sheet. The simulation results demonstrate that the collision processes cannot be adequately described by a simple binary approximation. The energy transfer from the projectile to the graphite sheet exhibits a very complicated behavior when the kinetic energy of the incident hydrogen atom is below 30 eV, strongly depending on the impact position. When its kinetic energy is lower than 0.35 eV, the incident hydrogen is always reflected back from the single, perfect graphite sheet; when its kinetic energy is higher than 0.35 eV, then whether the incident particle penetrates the graphite sheet, is reflected back or is adsorbed depends on the impact position. In certain areas of the graphite sheet, either adsorption or reflection of an incident hydrogen atom can occur in two different energy ranges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Chemical response of lithiated graphite with deuterium irradiation

Lithium wall conditioning has been found to enhance plasma performance for graphite walled fusion devices such as TFTR, CDX-U, T-11M, TJ-II and NSTX. Among observed plasma enhancements is a reduction in edge density and reduced deuterium recycling. The mechanism by which lithiated graphite retains deuterium is largely unknown. Under controlled laboratory conditions, X-ray photoelectron spectroscopy (XPS) is used to observe the chemical changes that occur on ATJ graphite after lithium deposition. The chemical state of lithiated graphite is found to change upon deuterium irradiation indicating the formation Li-O-D, manifest at 532.9 {+-} 0.6 eV. Lithium-deuterium interactions are also manifest in the C 1s photoelectron energy range and show Li-C-D interactions at 291.2 {+-} 0.6 eV. Post-mortem NSTX tiles that have been exposed to air upon extraction are cleaned and examined, revealing the chemical archaeology that formed during NSTX operations. XPS spectra show strong correlation ({+-} 0.3 eV) in Li-O-D and Li-O peaks from post-mortem and control experiments, thus validating offline experiments. We report findings that show that deuterium is found to interact with lithium after lithium has already reacted with carbon and oxygen.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanostructured carbon films with oriented graphitic planes

Nanostructured carbon films with oriented graphitic planes can be deposited by applying energetic carbon bombardment. The present work shows the possibility of structuring graphitic planes perpendicular to the substrate in following two distinct ways: (i) applying sufficiently large carbon energies for deposition at room temperature (E>10 keV), (ii) utilizing much lower energies for deposition at elevated substrate temperatures (T>200 deg. C). High resolution transmission electron microscopy is used to probe the graphitic planes. The alignment achieved at elevated temperatures does not depend on the deposition angle. The data provides insight into the mechanisms leading to the growth of oriented graphitic planes under different conditions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A molecular dynamics study of diamond and graphite under tritium bombardment

Carbon has proven to be a promising plasma facing material in tokamak reactors because of its high thermal conductivity and limited radiative cooling as a plasma contaminant. It is used in a range of forms, mostly graphitic or amorphous. Diamond, however, has superior thermal properties to other forms of carbon but has been largely overlooked due to fears of graphitisation. Tritium retention is, perhaps, the major disadvantage of using carbon as a plasma facing material in a deuterium-tritium fusion reactor. Here, we use molecular dynamics to study the relative performance of diamond and graphite on exposure to tritium bombardment. We model the cumulative bombarded of diamond and graphitic surfaces with a high flux (10{sup 29} m{sup -2} s{sup -1}) of low energy 15 eV tritium atoms. This was done for substrate temperatures in the range 300-2100 K. Below temperatures of graphitisation ({approx}1000 K) the diamond structure confined tritium to the upper surface, this inhibited further structural damage and resulted in lower total retention. The graphitic surface allowed for deeper tritium penetration and therefore greater retention. These results corroborate with recent experimental evidence.

36 MATERIALS SCIENCE↗

Transforming graphite to nanoscale diamonds by a femtosecond laser pulse

Formation of cubic diamond from graphite following irradiation by a single, intense, ultra-short laser pulse has been observed. Highly oriented pyrolytic graphite (HOPG) samples were irradiated by a 100 fs pulse with a center wavelength of 800 nm. Following laser exposure, the HOPG samples were studied using Raman spectroscopy of the sample surface. In the laser-irradiated areas, nanoscale cubic diamond crystals have been formed. The exposed areas were also studied using grazing incidence x-ray powder diffraction showing a restacking of planes from hexagonal graphite to rhombohedral graphite.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low-temperature, site selective graphitization of SiC via ion implantation and pulsed laser annealing

A technique is presented to selectively graphitize regions of SiC by ion implantation and pulsed laser annealing (PLA). Nanoscale features are patterned over large areas by multi-ion beam lithography and subsequently converted to few-layer graphene via PLA in air. Graphitization occurs only where ions have been implanted and without elevating the temperature of the surrounding substrate. Samples were characterized using Raman spectroscopy, ion scattering/channeling, SEM, and AFM, from which the degree of graphitization was determined to vary with implantation species, damage and dose, laser fluence, and pulsing. Contrasting growth regimes and graphitization mechanisms during PLA are discussed.

36 MATERIALS SCIENCE↗

Ice and water droplets on graphite: A comparison of quantum and classical simulations

Ice and water droplets on graphite have been studied by quantum path integral and classical molecular dynamics simulations. The point-charge q-TIP4P/F potential was used to model the interaction between flexible water molecules, while the water-graphite interaction was described by a Lennard-Jones potential previously used to reproduce the macroscopic contact angle of water droplets on graphite. Several energetic and structural properties of water droplets with sizes between 10{sup 2} and 10{sup 3} molecules were analyzed in a temperature interval of 50–350 K. The vibrational density of states of crystalline and amorphous ice drops was correlated to the one of ice Ih to assess the influence of the droplet interface and molecular disorder on the vibrational properties. The average distance of covalent OH bonds is found 0.01 Å larger in the quantum limit than in the classical one. The OO distances are elongated by 0.03 Å in the quantum simulations at 50 K. Bond distance fluctuations are large as a consequence of the zero-point vibrations. The analysis of the H-bond network shows that the liquid droplet is more structured in the classical limit than in the quantum case. The average kinetic and potential energy of the ice and water droplets on graphite has been compared with the values of ice Ih and liquid water as a function of temperature. The droplet kinetic energy shows a temperature dependence similar to the one of liquid water, without apparent discontinuity at temperatures where the droplet is solid. However, the droplet potential energy becomes significantly larger than the one of ice or water at the same temperature. In the quantum limit, the ice droplet is more expanded than in a classical description. Liquid droplets display identical density profiles and liquid-vapor interfaces in the quantum and classical limits. The value of the contact angle is not influenced by quantum effects. Contact angles of droplets decrease as the size of the water droplet increases which implies a positive sign of the line tension of the droplet.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sintered tantalum carbide coatings on graphite substrates: Highly reliable protective coatings for bulk and epitaxial growth

Highly reliable low-cost protective coatings have been sought after for use in crucibles and susceptors for bulk and epitaxial film growth processes involving wide bandgap materials. Here, we propose a production technique for ultra-thick (50–200 μmt) tantalum carbide (TaC) protective coatings on graphite substrates, which consists of TaC slurry application and subsequent sintering processes, i.e., a wet ceramic process. Structural analysis of the sintered TaC layers indicated that they have a dense granular structure containing coarse grain with sizes of 10–50 μm. Furthermore, no cracks or pinholes penetrated through the layers, i.e., the TaC layers are highly reliable protective coatings. The analysis also indicated that no plastic deformation occurred during the production process, and the non-textured crystalline orientation of the TaC layers is the origin of their high reliability and durability. The TaC-coated graphite crucibles were tested in an aluminum nitride (AlN) sublimation growth process, which involves extremely corrosive conditions, and demonstrated their practical reliability and durability in the AlN growth process as a TaC-coated graphite. The application of the TaC-coated graphite materials to crucibles and susceptors for use in bulk AlN single crystal growth, bulk silicon carbide (SiC) single crystal growth, chemical vapor deposition of epitaxial SiC films, and metal-organic vapor phase epitaxy of group-III nitrides will lead to further improvements in crystal quality and reduced processing costs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Graphite to ultrafine nanocrystalline diamond phase transition model and growth restriction mechanism induced by nanosecond laser processing

To have a clear insight into nanocrystal growth from graphite to diamond upon high energy pulsed laser irradiation of graphite suspension, synthesis of ultrafine nanocrystalline diamonds with laser energy set up from 0.3 J to 12 J, repetition rate of 10 Hz has been studied. The method allows synthesizing ultrafine nanocrystalline particles continuously at the ambient temperature and normal pressure. The particle size is shown independent of laser energy, which is ultrafine and ranges in 2–6 nm. The theoretical grown size of nano-diamonds is found in well agreement with the experiment results. Four kinds of production were found: nano-diamond, spherical carbon nano-particles, flocculent amorphous carbon, and graphene nano-ribbon rolls. A solid-vapor-plasma-liquid coexistence model describing phase transition from graphite to diamond induced by nanosecond laser processing was proposed. Graphene nano-ribbon rolls might be the intermediate phase in the conversion from graphite to diamond.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lifetime experimental study of graphite cathode for relativistic backward wave oscillator

Graphite cathodes are widely used due to their good emission properties, especially their long lifetime. Some previous papers have researched their lifetime under certain conditions and uncovered some important phenomena. This paper is dedicated to research the lifetime of the graphite cathode under higher power. In the lifetime test, the voltage and current amplitudes are about 970 kV and 9.7 kA, respectively. The repetition rate is 20 Hz. An X-band relativistic backward wave oscillator is used to generate high power microwave by utilizing the electron beam energy. The experimental results demonstrate that the emission property of the graphite cathode remains quite stable during 10{sup 5} pulses, despite some slight deteriorations regarding the beam and microwave parameters. The macroscopic morphology change of the cathode blade due to material evaporation is observed by a laser microscope. The mass loss of the graphite cathode is about 60 μg/C. Meanwhile, the observation by a scanning electron microscope uncovers that the original numerous flaky micro-structures are totally replaced by a relatively smooth surface at the mid region of the cathode blade and a large number of new micro-protrusions at the blade edges during the lifetime test.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Negative pressure and spallation in graphite targets under nano- and picosecond laser irradiation

We present the results of experiments on the spallation phenomena in graphite targets under shock-wave nano- and picosecond irradiation, which have been performed on Kamerton-T (GPI, Moscow, Russia) and PHELIX (GSI, Darmstadt, Germany) laser facilities. In the range of the strain rates of 10{sup 6} – 10{sup 7} s{sup -1}, the data on the dynamic mechanical strength of the material at rapure (spallation) have been for the first time obtained. With a maximal strain rate of 1.4 × 10{sup 7} s{sup -1}, the spall strength of 2.1 GPa is obtained, which constitutes 64% of the theoretical ultimate tensile strength of graphite. The effect of spallation is observed not only on the rear side of the target, but also on its irradiated (front) surface. With the use of optical and scanning electron microscopes, the morphology of the front and rear surfaces of the targets is studied. By means of Raman scattering of light, the graphite structure both on the target front surface under laser exposure and on its rear side in the spall zone is investigated. A comparison of the dynamic strength of graphite and synthetic diamond is performed. (extreme light fields and their applications)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ne ISOTOPES IN INDIVIDUAL PRESOLAR GRAPHITE GRAINS FROM THE MURCHISON METEORITE TOGETHER WITH He, C, O, Mg-Al ISOTOPIC ANALYSES AS TRACERS OF THEIR ORIGINS

Ne isotopes measured in individual presolar graphite grains, solid samples of extinct stars preserved in primitive meteorites, provide information on the type of stellar sources of the grains and on nucleosynthetic mixing and ion-trapping processes which were operating. We present Ne and He isotope analyses of single presolar graphite grains from the KFB1 density fraction extracted from the carbonaceous chondrite Murchison. In addition, we measured isotopes of C, O, and Mg-Al with the NanoSIMS ion microprobe to better constrain the origin of the grains. Eleven out of 51 presolar graphite grains contain nucleosynthetic {sup 22}Ne above our detection limit. This fraction of {sup 22}Ne-rich grains is similar to the one reported by Nichols et al. although we have a lower {sup 22}Ne detection limit. We detected rare He-shell {sup 20}Ne in one {sup 22}Ne-rich grain and obtained the {sup 20}Ne/{sup 22}Ne ratio (0.03 {+-} 0.02) of the He-shell of an Asymptotic Giant Branch (AGB) star with 1.5-2 M {sub sun} and subsolar metallicity. We also detected {sup 4}He in this grain, while in the other grains, which originally acquired He, He-loss seems to be significant. We found unequivocal evidence for radiogenic {sup 22}Ne (Ne-R) in another graphite grain, which likely condensed in a core-collapse supernova and which incorporated live radioactive {sup 22}Na (t {sub 1/2} = 2.6 yr). For the other grains, a clear assignment to a stellar source is more difficult to make. Putative stellar sources are supernovae, AGB stars, born-again AGB stars, J-type carbon stars, and CO novae.

79 ASTRONOMY AND ASTROPHYSICS↗