SEARCH · Search NASA

Results for “hardware performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Development and implementation of a low cost micro computer system for LANDSAT analysis and geographic data base applications

Since the implementation of the GRID and IMGRID computer programs for multivariate spatial analysis in the early 1970's, geographic data analysis subsequently moved from large computers to minicomputers and now to microcomputers with radical reduction in the costs associated with planning analyses. Programs designed to process LANDSAT data to be used as one element in a geographic data base were used once NIMGRID (new IMGRID), a raster oriented geographic information system, was implemented on the microcomputer. Programs for training field selection, supervised and unsupervised classification, and image enhancement were added. Enhancements to the color graphics capabilities of the microsystem allow display of three channels of LANDSAT data in color infrared format. The basic microcomputer hardware needed to perform NIMGRID and most LANDSAT analyses is listed as well as the software available for LANDSAT processing.

Faust, N.↗

NASA NTRS1983

Digital Instrumentation Analysis and Navigation System (DIANS) for system identification

Hardware, software, and performance features of the Digital Instrumentation and Navigation System (DIANS) designed for NASA research to collect flight data as a strap-down system are detailed. The support software for the system has a cross compiler, a linkage editor, and cross assembler, extended communication capabilities, postflight processing applications, and compilers for PASCAL, FORTRAN, CBASIC and MT. The DIANS microcomputer has a 1 Mbyte RAM module, a fast floating point processor board, a 68000 monoboard computer with 64 RAM, a 128 Kbyte bubble memory card, and a navigation radio. The system also carries a battery for full system operation for over an hour. The support software is also stored on a host mainframe computer, which has a CP/M operating system. Pitch, roll, and heading data are gathered from the on-board system, and communication is possible between the airborne and ground-based computer.

Smyth, R. K.↗

NASA NTRS1984

PASLIB programmer's guide for the finite element machine, revision 2.1-A

PASLIB is a library of Pascal callable subroutines designed to give application programs access to the unique architectural features of the Finite Element Machine and to the software support services provided by the Nodal Exec operating system which runs on it. The PASLIB subroutines are documented and the procedures needed to write Pascal programs for execution on the Finite Element Machine are defined. Considerations for obtaining optimum hardware and software performance are given. A brief overview of debugging and performance analysis capabilities available to the programmer is presented.

Crockett, T. W.↗

NASA NTRS1984

Photovoltaic central-station power conditioner subsystems

The potential of applying new advanced circuit topologies and semiconductors with improved switching characteristics to the design and development of central-station power conditioning subsystems is assessed. State-of-the-art large power conditioners suitable for photovoltaic central-station application are reviewed. Advanced topology power conditioning subsystems, when compared to available production hardware, promise improved performance, significant cost reduction, and lower cost-to-efficiency ratios.

Krauthamer, S.↗

NASA NTRS1987

Color postprocessing for 3-dimensional finite element mesh quality evaluation and evolving graphical workstation

Three general tasks on general-purpose, interactive color graphics postprocessing for three-dimensional computational mechanics were accomplished. First, the existing program (POSTPRO3D) is ported to a high-resolution device. In the course of this transfer, numerous enhancements are implemented in the program. The performance of the hardware was evaluated from the point of view of engineering postprocessing, and the characteristics of future hardware were discussed. Second, interactive graphical tools implemented to facilitate qualitative mesh evaluation from a single analysis. The literature was surveyed and a bibliography compiled. Qualitative mesh sensors were examined, and the use of two-dimensional plots of unaveraged responses on the surface of three-dimensional continua was emphasized in an interactive color raster graphics environment. Finally, a postprocessing environment was designed for state-of-the-art workstation technology. Modularity, personalization of the environment, integration of the engineering design processes, and the development and use of high-level graphics tools are some of the features of the intended environment.

Panthaki, Malcolm J.↗

NASA NTRS1988

Validating the airborne and ground based components of a differential GPS system

A differential GPS mechanization of an external data link concept under development at NASA Ames Research Center is discussed. The system is intended to evaluate the use of differential GPS to support helicopter approach operation. Analytical techniques for static testing and evaluation of the system hardware and software performance in real time are described. Several techniques that have been used to detect and rectify a specific problem encountered during the tests are dicussed. An example of flight test results using the validated system is provided.

Edwards, F. G.↗

NASA NTRS1987

Study of sampling systems for comets and Mars

Several aspects of the techniques that can be applied to acquisition and preservation of samples from Mars and a cometary nucleus were examined. Scientific approaches to sampling, grounded in proven engineering methods are the key to achieving the maximum science value from the sample return mission. If development of these approaches for collecting and preserving does not preceed mission definition, it is likely that only suboptimal techniques will be available because of the constraints of formal schedule timelines and the normal pressure to select only the most conservative and least sophisticated approaches when development has lagged the mission milestones. With a reasonable investment now, before the final mission definition, the sampling approach can become highly developed, ready for implementation, and mature enough to help set the requirements for the mission hardware and its performance.

Amundsen, R. J.↗

NASA NTRS1989

Development testing of TSS-1 Deployer tether control system mechanisms

Successful tether deployment and retrieval, consistent with established control laws, is predicated upon statusing real time tether dynamic conditions. This paper reports on the initial phase of engineering tests performed on various components and subassemblies integral to the TSS-1 tether control system as part of the TSS Deployer. The tests were conducted as part of the tether control system development and verification plan to confirm the functionality and map the performance of the hardware in both ambient and environmental test conditions. The result of this development effort is a lessons-learned list and design upgrades to both the flight and test hardware and to the test methods and procedures.

Bentley, D. P.↗

NASA NTRS1989

Instrument description of the airborne microwave temperature profiler

The microwave temperature profiler (MTP) is a passive microwave radiometer installed in the NASA ER-2 aircraft and used to measure profiles of air temperature versus altitude. It operates at 57.3 and 58.8 GHz, where oxygen molecules emit thermal radiation. Brightness temperature is measured at a selection of viewing elevation angles every 14 s. MTP was the only remote sensing experiment aboard the ER-2 during the Airborne Antarctic Ozone Experiment. This paper describes hardware, calibration, and performance aspects of the MTP.

Denning, Richard F.↗

NASA NTRS1989

Visualization of fluid dynamics at NASA Ames

The hardware and software currently used for visualization of fluid dynamics at NASA Ames is described. The software includes programs to create scenes (for example particle traces representing the flow over an aircraft), programs to interactively view the scenes, and programs to control the creation of video tapes and 16mm movies. The hardware includes high performance graphics workstations, a high speed network, digital video equipment, and film recorders.

Watson, Val↗

NASA NTRS1990

Evaluation plan for space station network interface units

Outlined here is a procedure for evaluating network interface units (NIUs) produced for the Space Station program. The procedures should be equally applicable to the data management system (DMS) testbed NIUs produced by Honeywell and IBM. The evaluation procedures are divided into four areas. Performance measurement tools are hardware and software that must be developed in order to evaluate NIU performance. Performance tests are a series of tests, each of which documents some specific characteristic of NIU and/or network performance. In general, these performance tests quantify the speed, capacity, latency, and reliability of message transmission under a wide variety of conditions. Functionality tests are a series of tests and code inspections that demonstrate the functionality of the particular subset of ISO protocols which have been implemented in a given NIU. Conformance tests are a series of tests which would expose whether or not selected features within the ISO protocols are present and interoperable.

Weaver, Alfred C.↗

NASA NTRS1991

Enhancing aeropropulsion research with high-speed interactive computing

NASA-Lewis has committed to a long range goal of creating a numerical test cell for aeropropulsion research and development. Efforts are underway to develop a first generation Numerical Propulsion System Simulation (NPSS). The NPSS will provide a unique capability to numerically simulate advanced propulsion systems from nose to tail. Two essential ingredients to the NPSS are: (1) experimentally validated Computational Fluid Dynamics (CFD) codes; and (2) high performing computing systems (hardware and software) that will permit those codes to be used efficiently. To this end, NASA-Lewis is using high speed, interactive computing as a means for achieving Integrated CFD and Experiments (ICE). The development is described of a prototype ICE system for multistage compressor flow physics research.

Szuch, John R.↗

NASA NTRS1990

Design of optimal correlation filters for hybrid vision systems

Research is underway at the NASA Johnson Space Center on the development of vision systems that recognize objects and estimate their position by processing their images. This is a crucial task in many space applications such as autonomous landing on Mars sites, satellite inspection and repair, and docking of space shuttle and space station. Currently available algorithms and hardware are too slow to be suitable for these tasks. Electronic digital hardware exhibits superior performance in computing and control; however, they take too much time to carry out important signal processing operations such as Fourier transformation of image data and calculation of correlation between two images. Fortunately, because of the inherent parallelism, optical devices can carry out these operations very fast, although they are not quite suitable for computation and control type operations. Hence, investigations are currently being conducted on the development of hybrid vision systems that utilize both optical techniques and digital processing jointly to carry out the object recognition tasks in real time. Algorithms for the design of optimal filters for use in hybrid vision systems were developed. Specifically, an algorithm was developed for the design of real-valued frequency plane correlation filters. Furthermore, research was also conducted on designing correlation filters optimal in the sense of providing maximum signal-to-nose ratio when noise is present in the detectors in the correlation plane. Algorithms were developed for the design of different types of optimal filters: complex filters, real-value filters, phase-only filters, ternary-valued filters, coupled filters. This report presents some of these algorithms in detail along with their derivations.

Rajan, Periasamy K.↗

NASA NTRS1990

Modeling and simulation of the space platform power system

A comprehensive computer-aided modeling and simulation technique for the space platform power system is described. Large-signal and small-signal modeling is presented for the system components. The component models have been integrated to form the complete power system model. The system model is shown to be a powerful tool in simulating the behavior of the system with variation of illumination level and load. It can be used to study the bus regulation in each mode and to observe mode changes as the solar array is subjected to transitions from sunlight to eclipse and back to sunlight. System simulations show how the bus regulation is maintained by activating the shunt switching unit, the charger, or the discharger, depending on the available illumination level. The system model is suitable for verifying hardware results of for analyzing the performance of a proposed system where hardware testing is not feasible. The EASY5 dynamic analysis program is used as the host software for the modeling and simulation.

Patil, A. R.↗

NASA NTRS1991

Enhancing aeropropulsion research with high-speed interactive computing

Szuch, John R.↗

NASA NTRS1992

Rate 8/9 coded 8-PSK system for downlink applications

An advanced Coded Trellis Modulation (CTM) System which achieves a 2 bits/s/Hz bandwidth efficiency at an information rate of 200 Mbit/s while minimizing satellite power requirements, was developed for downlink earth station applications. The CTM system employs a high-speed rate 8/9 convolutional code with Viterbi decoding and an 8-Phase Shift Keying (PSK) modem. The minimum Euclidean distance between the modulated waveforms corresponding to the information sequences are maximized in order to maximize the noise immunity of the system. Nyquist filters with a square-root of 40 percent roll-off are used at the transmit and receive sides of the modem in order to minimize intersymbol interference, adjacent channel interference, and distortion at the nonlinear satellite power amplifier. The use of a coded system here also minimizes the effects of co-channel interference. The developed performance of the hardware system was measured to achieve within 1.5 dB from theory at a bit error rate of 5 x 10(exp -7) over an additive white Gaussian noise channel.

Fang, Russell↗

NASA NTRS1991

A RAM architecture for concurrent access and on-chip testing

A novel RAM architecture supporting concurrent memory access and on-chip testing (CMAT) is proposed. A large-capacity memory chip is decomposed into test neighborhoods (TNDs), each of which is tested independently. When there are data stored in a TND, the data are saved into a buffer before testing the TND, and the TND's contents are restored using buffered data after testing the TND. If an external request is not made to the TND, the request can be directed to the addressed memory cells. Otherwise, the buffered data can be loaded back into the TND, or the request is detoured to a corresponding buffer. By deriving an analytical model, the performance penalty and hardware overhead of the CMAT architecture are shown to be very small.

Liu, Jyh-Charn↗

NASA NTRS1993

Orbiter Autoland reliability analysis

The Space Shuttle Orbiter is the only space reentry vehicle in which the crew is seated upright. This position presents some physiological effects requiring countermeasures to prevent a crewmember from becoming incapacitated. This also introduces a potential need for automated vehicle landing capability. Autoland is a primary procedure that was identified as a requirement for landing following and extended duration orbiter mission. This report documents the results of the reliability analysis performed on the hardware required for an automated landing. A reliability block diagram was used to evaluate system reliability. The analysis considers the manual and automated landing modes currently available on the Orbiter. (Autoland is presently a backup system only.) Results of this study indicate a +/- 36 percent probability of successfully extending a nominal mission to 30 days. Enough variations were evaluated to verify that the reliability could be altered with missions planning and procedures. If the crew is modeled as being fully capable after 30 days, the probability of a successful manual landing is comparable to that of Autoland because much of the hardware is used for both manual and automated landing modes. The analysis indicates that the reliability for the manual mode is limited by the hardware and depends greatly on crew capability. Crew capability for a successful landing after 30 days has not been determined yet.

Welch, D. Phillip↗