Search NASA⌕ Search

SEARCH · Search NASA

Results for “hematite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Iron-stabilized nanocrystalline ZrO{sub 2} solid solutions: Synthesis by combustion and thermal stability

The synthesis of Fe{sup 3+}-stabilized zirconia by the nitrate/urea combustion route was investigated. Using several characterization techniques, including X-ray diffraction, field-emission-gun scanning electron microscopy and notably Moessbauer spectroscopy, it was possible to determine the appropriate amount of urea that allows to obtain a totally stabilized Zr{sub 0.9}Fe{sub 0.1}O{sub 1.95} solid solution. The nanocrystalline zirconia solid solution is mostly tetragonal, but the presence of the cubic phase could not be ruled out. An in-depth study of the thermal stability in air showed that the Fe{sup 3+} solubility in the stabilized solid solution starts to decrease at about 875 deg. C which results in the formation of hematite (possibly containing some Zr{sup 4+}) at the surface of the zirconia grains and further provokes the progressive transformation into the monoclinic zirconia phase.

36 MATERIALS SCIENCE↗

Synthesis and characterization of Fe(III)-silicate precipitation tubes

Fe(III)-silicate precipitation tubes synthesized through 'silica garden' route have been characterized using a number of analytical techniques including X-ray diffraction, infrared spectroscopy, atomic force microscopy, scanning and transmission electron microscopy. These tubes are brittle and amorphous and are hierarchically built from smaller tubes of 5-10 nm diameters. They remain amorphous at least up to 650 {sup o}C. Crystobalite and hematite are the major phases present in Fe(III)-silicate tubes heated at 850 {sup o}C. Morphology and chemical compositions at the external and internal walls of these tubes are remarkably different. These tubes are porous with high BET surface area of 291.2 m{sup 2}/g. Fe(III)-silicate tubes contain significant amount of physically and chemically bound moisture. They show promise as an adsorbent for Pb(II), Zn(II), and Cr(III) in aqueous medium.

36 MATERIALS SCIENCE↗

Structural and magnetic properties of a mechanochemically activated Ti-Fe{sub 2}O{sub 3} solid mixture

The mechanochemical effects on the reactivity and properties of a titanium/hematite powder mixture with molar ratio of 1/2 are investigated. Crystalline-phase structure, composition, hyperfine and magnetic behaviors were analyzed as a function of activation time by means of X-ray diffraction, scanning electron microscopy, Moessbauer spectroscopy and vibrating sample magnetometry. The results showed that at relatively short activation times metallic Ti reduces part of the ferric ions, yielding a complex product formed mainly by a mix of two solid solutions Fe{sub 3-x}Ti{sub x}O{sub 4} (titanomagnetites), both with very different x values (0 < x < 1). Also metallic iron and superparamagnetic hematite particles were detected by Moessbauer spectroscopy. As the mechanical treatment extends the composition of the reactive mixture changes, prevailing in the end the solid solution with higher x value. In contrast, when these activated samples are thermally treated the fraction of the solid solution which is richer in Ti diminishes. This fact produces a significant variation of the saturation magnetization of the obtained material.

36 MATERIALS SCIENCE↗

Synthesis of nanocrystalline iron oxide ultrathin films by thermal decomposition of iron nitropruside: Structural and optical properties

Ultrathin films of nanocrystalline {alpha}-Fe{sub 2}O{sub 3} have been deposited on glass substrates from an inorganic precursor, iron nitropruside. This is a novel route of synthesis for iron oxide thin films on glass substrates, by annealing the precursor thin film in air at 650 {sup o}C for 15 min. The films were characterized using TG-DTA analysis, X-ray diffraction, UV-visible, FESEM, AFM and Raman measurements. X-ray diffraction and Raman analyses revealed that the deposited films contain {alpha}-phase of Fe{sub 2}O{sub 3} (hematite). The synthetic route described here provides a very simple and cost-effective method to deposit {alpha}-Fe{sub 2}O{sub 3} thin films on glass substrates with band gap energy of about 2.75 eV. The deposited films were found to show catalytic effect for the photo-degradation of phenol.

36 MATERIALS SCIENCE↗

Crystallization and microstructure of glasses in the system Na{sub 2}O/MnO/SiO{sub 2}/Fe{sub 2}O{sub 3}

Glasses with the compositions (100 - x)(0.16Na{sub 2}O/0.10MnO/0.74SiO{sub 2})/xFe{sub 2}O{sub 3}, (x = 5-30) and 16Na{sub 2}O/10MnO/(74 - y)SiO{sub 2}/yFe{sub 2}O{sub 3} (y = 5-30) were studied using X-ray diffraction and scanning electron microscopy. The effect of the chemical composition and the thermal history on the phase formation and the resulting microstructure was investigated. During cooling, the precipitation of ferrimagnetic solid solutions Fe{sub 3}O{sub 4}/Mn{sub 3}O{sub 4} was observed. These crystals show dendritic or platelet shape, whereby the platelets are ferromagnetic and the dendrites - mainly paramagnetic. The tendency towards crystallization can be suppressed by increasing the Na{sub 2}O-concentration. In contrast to glasses without manganese oxide, the precipitation of hematite is not observed. Therefore, the addition of reducing agents is not required, in order to crystallize large volume concentrations of the ferrimagnetic phase.

36 MATERIALS SCIENCE↗

{alpha}-Fe{sub 2}O{sub 3} as an anode material with capacity rise and high rate capability for lithium-ion batteries

Graphical abstract: Nanosized porous {alpha}-Fe{sub 2}O{sub 3} powder was successfully synthesized via the molten salt method. Electrochemical measurement results demonstrated that the electrode properties of the {alpha}-Fe{sub 2}O{sub 3} could offers excellent cycling performance and high rate capability. The capacity of the product shows two different trends during cycling which are rarely reported in the literature, a decrease in capacity in the first 100 cycles and an increase afterwards up to 600 cycles, with the lowest and highest capacity around 970 and 1972 mAh/g, respectively. Research highlights: {yields} Nanosized {alpha}-Fe{sub 2}O{sub 3} as an anode material for lithium-ion battery. {yields} The nanosized {alpha}-Fe{sub 2}O{sub 3} shows excellent electrochemical performance and exhibits the feature of capacity increase upon cycling. {yields} The porous rhombohedral structures of {alpha}-Fe{sub 2}O{sub 3} could provides the short Li{sup +} diffusion length, decreases the traverse time for electrons and Li{sup +} ions, and reduces the volume expansion to some extent. {yields} The cubic structure of {alpha}-Fe{sub 2}O{sub 3} has been modified to a needle-like structure after prolonged cycling. -- Abstract: We report a simple molten salt method to prepare nanosize {alpha}-Fe{sub 2}O{sub 3}, as well as its electrochemical performance as anode material for lithium ion batteries. The structure and morphology were confirmed by Raman spectroscopy, X-ray diffraction, and transmission electron microscopy. The as-prepared {alpha}-Fe{sub 2}O{sub 3} is a rhombohedral phase of hematite with crystal size in the range of 20-40 nm. The electrochemical measurements were performed using the as-prepared powders as the active material for a lithium-ion cell. The nanosized {alpha}-Fe{sub 2}O{sub 3} shows excellent cycling performance and rate capability. It also exhibits the feature of capacity increase upon cycling. The outstanding electrochemical performance of the {alpha}-Fe{sub 2}O{sub 3} can be related to several factors, namely, the short Li{sup +} diffusion length along the porous rhombohedral structures and the nanosized nature of the materials, which decreases the traverse time for electrons and Li{sup +} ions, and reduces the volume expansion to some extent during charge/discharge reactions.

36 MATERIALS SCIENCE↗

Synthesis and characterization of carbon-coated Fe{sub 3}O{sub 4} nanoflakes as anode material for lithium-ion batteries

Graphical abstract: - Highlights: • Carbon-coated Fe{sub 3}O{sub 4} nanoflakes have been synthesized by hydrothermal method. • The nanocomposite electrode shows a large reversible capacity up to 740 mAh g{sup −1}. • The nanocomposite electrode shows promising cycling stability and rate capability. - Abstract: The carbon-coated Fe{sub 3}O{sub 4} nanoflakes were synthesized by partial reduction of monodispersed hematite (Fe{sub 2}O{sub 3}) nanoflakes with carbon coating. The carbon-coated Fe{sub 3}O{sub 4} nanoflakes were characterized by X-ray diffraction, Raman spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, and galvanostatic charge/discharge measurements. It has been demonstrated that Fe{sub 2}O{sub 3} can be completely converted to Fe{sub 3}O{sub 4} during the reduction process and carbon can be successfully coated on the surface of Fe{sub 3}O{sub 4} nanoflakes, forming a conductive matrix. As anode material for lithium-ion batteries, the carbon-coated Fe{sub 3}O{sub 4} nanoflakes exhibit a large reversible capacity up to 740 mAh g{sup −1} with significantly improved cycling stability and rate capability compared to the bare Fe{sub 2}O{sub 3} nanoflakes. The superior electrochemical performance of the carbon-coated Fe{sub 3}O{sub 4} nanoflakes can be attributed to the synthetic effects between small particle size and highly conductive carbon matrix.

36 MATERIALS SCIENCE↗

Size dependent structural and magnetic properties of Al substituted Co–Mg ferrites synthesized by the sol–gel auto-combustion method

Highlights: • Well-crystalline Co{sub 0.7}Mg{sub 0.3}AlFeO{sub 4} nanoparticles with small grain size were obtained. • The approach is sol–gel auto-combustion technique for obtained nanoparticles. • The prepared Co{sub 0.7}Mg{sub 0.3}AlFeO{sub 4} ferrites are decent soft materials with low coercivity. • The minor decrease in lattice parameter with increase of temperature was observed. - Abstract: Single phased nanocrystalline Co{sub 0.7}Mg{sub 0.3}FeAlO{sub 4} ferrites having low coercivity were synthesized by the sol–gel auto-combustion route. The subsequent powder materials were sintered in a temperature range of 800–1200 °C for 2 h. The effects of sintering temperatures on the structure, morphology and magnetic properties of the prepared soft magnetic material were studied. X-ray diffractometer (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), and magnetic property measurement system (MPMS) were used to characterize the samples. X-ray diffraction analysis confirmed a single-phase cubic spinel structure and ruled out the presence of impurities like hematite. The higher sintering temperatures have caused in enhanced mark of crystallinity and bigger average grain size of the nanocrystals. A slight decrease in lattice parameters was noticed with a rise of grain size. Magnetic measurements revealed that grain size increase led to a decrease in the coercivity and, in difference, an increase in the saturation magnetization.

36 MATERIALS SCIENCE↗

Synthesis of α-Fe{sub 2}O{sub 3}-functionalised graphene oxide nanocomposite by a facile low temperature method and study of its magnetic and hyperfine properties

Highlights: • Synthesis of reduced graphene oxide (rGO)/α-Fe{sub 2}O{sub 3} nanocomposites (NCs) by sol–gel method. • Samples exhibited ferromagnetism originated due to surface canted spins. • rGO enhanced the value of saturation magnetization and coercivity of the bare nanoparticle. • RKKY coupling between the isolated rGO spins and the magnetic nanoparticles. - Abstract: Reduced graphene oxide/α-Fe{sub 2}O{sub 3} nanocomposites were synthesized by a simple sol–gel method. Initially, the samples were investigated by X-ray diffraction, high resolution transmission electron microscopy and Raman spectroscopy. High resolution transmission electron micrographs indicate that the magnetic nanoparticles are well dispersed in the reduced graphene oxide sheet-like structure. Fourier transform infrared spectroscopy studies corroborate the results obtained by X-ray diffraction. Temperature as well as field dependent magnetic measurements revealed ferromagnetism in the pristine α-Fe{sub 2}O{sub 3} as well as in the nanocomposite sample that is attributed to surface canted spins and defects present in the samples. The enhanced value of coercivity in case of the nanocomposite sample could be ascribed to the Ruderman–Kittel–Kasuya–Yosida type of interaction between the isolated reduced graphene oxide spin and the magnetic ions. Presence of super paramagnetic doublet as well as sextet patterns related to hematite phase is confirmed by the {sup 57}Fe-Mössbauer spectroscopy.

36 MATERIALS SCIENCE↗

Iron-oxide Aerogel and Xerogel Catalyst Formulations: Characterization by 57Fe Mössbauer and XAFS Spectroscopies

Iron in various iron-oxide aerogel and xerogel catalyst formulations ({ge}85% Fe{sub 2}O{sub 3}; {le}10% K, Co, Cu, or Pd) developed for possible use in Fischer-Tropsch synthesis (FTS) or the water-gas-shift (WGS) reaction has been examined by {sup 57}Fe Moessbauer spectroscopy. The seventeen samples consisted of both as-prepared and calcined aerogels and xerogels and their products after use as catalysts for FTS or the WGS reaction. Complementary XAFS spectra were obtained on the occurrence of the secondary elements in some of the same materials. A broad, slightly asymmetric, two-peak Moessbauer spectrum was obtained from the different as-prepared and calcined catalyst formulations in the majority of cases. Such spectra could only be satisfactorily fit with three quadrupole doublet components, but no systematic trends in the isomer shift and quadrupole splitting parameters and area ratios of the individual components could be discerned that reflected variations in the composition or preparation of the aerogel or xerogel materials. However, significant reductions were noted in the Moessbauer effective thickness (recoilless absorption effect per unit mass of iron) parameter, {chi}{sub eff}/g, determined at room temperature, for aerogels and xerogels compared to bulk iron oxides, reflecting the openness and lack of rigidity of the aerogel and xerogel structures. Moessbauer measurements for two aerogels over the range from 15 to 292 K confirmed the greatly diminished nature of this parameter at room temperature. Major increases in the effective thickness parameter were observed when the open structure of the aerogel or xerogel collapsed during calcination resulting in the formation of iron oxides (hematite, spinel ferrite). Similar structural changes were indicated by increases in this parameter after use of iron-oxide aerogels as catalysts for FTS or the WGS reaction, during which the iron-oxide aerogel was converted to a mixture of nonstoichiometric magnetite and the Haegg carbide, {chi}-Fe{sub 5}C{sub 2}, or nonstoichiometric magnetite, respectively.

01 COAL, LIGNITE, AND PEAT↗

Low Temperature Oxidation of Fe2+ Surface Sites on the (2x1) Reconstructed Surface of α-Fe2O3(01(1) over-bar2)

Temperature programmed desorption (TPD), electron energy loss spectroscopy (ELS) and low energy electron diffraction (LEED) were used to study the interaction of molecular oxygen with the (2x1) reconstructed surface of hematite α-Fe2O3(011bar2) under UHV conditions. The (2x1) surface is formed from vacuum annealing of the ‘ideal’ (1x1) surface and likely possesses Fe2+ surface sites. While O2 does not stick to the (1x1) surface at 120 K and high temperature, the amount of O2 adsorbed at 120 K on the (1x2) surface that can be recovered in TPD was estimated to be ~0.5 ML, with additional O2 irreversibly adsorbed based on subsequent H2O TPD. Molecularly and dissociatively adsorbed O2 is seen to modify the surface chemistry of H2O both in the form of stabilized OH groups and blocking of H2O adsorption sites. While O2 adsorption at low temperature does not transform the (2x1) surface into the (1x1) surface, the influence of O2 on the (2x1) surface involves both charge transfer from surface Fe2+ sites and formation of an ordered c(2x2) structure resulting from O2 dissociation.

36 MATERIALS SCIENCE↗

X-ray Microdiffraction from α-Ti 0.04 Fe 1.96 O 3 (0001) Epitaxial Film Grown Over α-Cr 2 O 3 Buffer Layer Boundary

Ti-doped hematite (α-Ti 0.04 Fe 1.96 O 3 ) film grown over patterned α-Cr 2 O 3 buffer layer on α-Al 2 O 3 (0001) substrate was characterized with synchrotron X-ray microdiffraction. The film was grown by oxygen plasma assisted molecular beam epitaxy method. The film growth mode was correlated to buffer layer boundary and Ti concentration variation. Epitaxial α-Ti 0.04 Fe 1.96 O 3 film was formed on bare substrate adjacent to the buffer layer. The epitaxial film was connected laterally to a strain-relaxed epitaxial α-Ti 0.04 Fe 1.96 O 3 film grown on the buffer layer. On bare α-Al2O3 substrate with diminished Ti concentration only a small portion of α-Ti x Fe 1-x O 3 film was epitaxial either as coherent to the substrate or strain-relaxed form.

36 MATERIALS SCIENCE↗

Resolving atomic transport through iron oxide under irradiation using isotopic tracers

Structural materials in nuclear environments are exposed to complex and harsh conditions, including high temperatures, corrosive solutions, and irradiation. Material stability and likewise degradation are fundamentally controlled by atomic transport mechanisms. Here, we investigate the influence of radiation-induced, non-equilibrium point defect populations on mass transport within model oxide systems using isotopic tracers and atom probe tomography. An isotopically labelled hematite (a-Fe2O3) film was synthesized with 16O- and 18O-rich layers (>30nm and 10 nm, respectively) sequentially deposited via molecular beam epitaxy. One region of the film was proton irradiated to ~0.1 dpa at 450°C, and regions outside the beam spot provided a non-irradiated control of thermal annealing only. 3D APT was used to directly visualize the elemental and O-isotopic redistribution following both thermal and combined thermal and irradiation conditions. Complementary scanning transmission electron microscopy (STEM) was also employed to study the microstructural evolution. Error function fits of the 18O-concentration profiles enabled quantification of diffusion coefficients.

isotopic tracers, diffusion, proton irradiation, h↗

Hydrogen Diffusion in Slit Pores: Role of Temperature, Pressure, Confinement, and Roughness

Diffusion of hydrogen (H 2 ) is important to understand the leakage risk and transport behavior for H 2 geologic storage. We applied molecular dynamics simulations to investigate the influencing factors of H2 diffusion in the slit pores of calcite, hematite, and quartz, owing to their abundance. It is revealed that the H2 self-diffusion coefficient increases with the temperature, regardless of the type of pore minerals. The diffusion of H 2 in the 20 nm slit pores falls into the bulk diffusion regime when the pressure is 10 MPa. The self-diffusion of H 2 decreases with pressure in all three types of slit pores, following a power law model with the exponents ranging from -0.825 to -0.964. Furthermore, the impact of confinement on H 2 diffusion is more pronounced for the slit pores with stronger interactions with H 2 -like calcite. The role of surface roughness in H 2 diffusion depends on the slit aperture. The rough surface enhances H 2 diffusion in the larger slit pores due to the enlarged effective pore space, whereas it weakens H 2 diffusion in the small slit pores due to stronger adsorption. These findings will fill the knowledge gap on the coupling effect of different factors influencing H 2 diffusion.

08 HYDROGEN↗

Wildfire Produces Transient Minerals: Speciation, Reactivity, and Fate of Iron and Manganese in Surface Soils Post Wildfire

Wildfire leads to the deposition of an ash layer at the land surface. This material typically has alkaline properties, abundant pyrogenic carbon, and elevated metal concentrations compared to surface soils. Here, we compare ash and surface soils collected three weeks and two years after the Glass Fire (St. Helena, California, USA) to determine how wildfire affects the speciation and reactivity of iron (Fe) and manganese (Mn), two micronutrients that influence many soil processes. Synchrotron-based analyses revealed that wildfire generated stable Fe oxides like maghemite (γ-Fe 2 O 3 ) and hematite (α-Fe 2 O 3 ) that likely derived from surface soil or mineral dust rather than the vegetation, and Mn oxides such as hausmannite (Mn 3 O 4 ) and bixbyite (Mn 2 O 3 ) that derived primarily from aboveground biomass. However, these pyrogenic minerals were absent in soils collected two years after the fire. Their loss from the soil surface may result from a combination of erosion, translocation to deeper soil layers, and chemical weathering. The latter hypothesis is supported by the enhanced mobilization of Fe and Mn from ash upon the addition of pyoverdine, a model biogenic ligand. The increased mobility of micronutrients from fire-derived minerals in ash in response to microbial and root exudation may facilitate postfire soil and vegetation recovery.

bixbyite↗

Competitive and Cooperative Effects during Nickel Adsorption to Iron Oxides in the Presence of Oxalate

Iron oxides are ubiquitous in soils and sediments and play a critical role in the geochemical distribution of trace elements and heavy metals via adsorption and coprecipitation. The presence of organic acids may potentially alter how metals associate with iron oxide minerals through a series of cooperative or competitive processes: solution complexation, ternary surface complexation, and surface site competition. The macroscopic and molecular-scale effects of these processes were investigated for Ni adsorption to hematite and goethite at pH 7 in the presence of oxalate. The addition of this organic acid suppresses Ni uptake on both minerals. Aqueous speciation suggests that this is dominantly the result of oxalate complexing and solubilizing Ni. Comparison of the Ni surface coverage to the concentration of free (uncomplexed) Ni 2+ in solution suggests that the oxalate also alters Ni adsorption affinity. EXAFS and ATR-FTIR spectroscopies indicate that these changes in binding affinity are due to the formation of Ni–oxalate ternary surface complexes. Here, these observations demonstrate that competition between dissolved oxalate and the mineral surface for Ni overwhelms the enhancement in adsorption associated with ternary complexation. Oxalate thus largely enhances Ni mobility, thereby increasing micronutrient bioavailability and inhibiting contaminant sequestration.

54 ENVIRONMENTAL SCIENCES↗

Understanding Anomalous Gas-Phase Peak Shifts in Dip-and-Pull Ambient Pressure XPS Experiments

Dip-and-pull ambient pressure X-ray photoelectron spectroscopy (AP-XPS) holds promise to uncover elementary processes of (photo)electrochemistry. We show, however, that the sample for such experiments should preferably be nonporous and the potential on the surface homogeneous. We carried out dip-and-pull AP-XPS experiments on a hematite thin film sample under the photoelectrochemical oxygen evolution reaction (OER) and find unexpected O 1s core level shifts. Upon electrochemical biasing under simulated solar light illumination, the gas-phase water peak shifted more than the electrolyte peak. To uncover the origin of the unexpected larger shift of the gas-phase peak, we performed electrostatic simulations using COMSOL, to map the potential field in the relevant volume between the sample and the first aperture of the XPS spectrometer. A number of geometric models were considered. We find that when the potential on the sample surface is inhomogeneous, e.g., with ionically isolated electrolyte patches, the gas-phase peak of the spectrum can shift more than the peak due to the electrolyte film. This suggests that at the measured sample position, the local potential was not as set by the potentiostat. Despite this, we find reversible consumption and replenishment of hydroxide in the spectra, which, due to OH– being the reactant of the OER in alkaline electrolyte, makes sense chemically. We propose that this is linked to OH– diffusion across the measured sample position, driven by the potential dependent consumption and replenishment of OH– at the nearby well-connected surface regions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of α-Fe 2 O 3 Nanoparticles/g-C 3 N 4 Direct Z-Scheme Heterojunction of Durable Photocatalytic Activity

The fabrication of a nanohybrid photocatalyst that combines α-Fe 2 O 3 nanoparticles with graphitic carbon nitride (g-C 3 N 4 ) is reported. The ensuing direct Z-scheme heterojunction greatly boosts the photocatalytic activity of the α-Fe 2 O 3 /g-C 3 N 4 nanohybrids. This results in organic dye degradation rates more than two times higher than its individual components, promoted by the efficient charge separation and transfer of the Z-scheme heterojunction mechanism of the nanohybrid photocatalyst. In addition, recyclability tests show an outstanding stability of the nanohybrids spanning five consecutive dye degradation experiments, during which the degradation rate is slightly improved. The origin of the improved photocatalytic performance of the nanohybrid lies in the intimate interaction between α-Fe 2 O 3 and g-C 3 N 4 afforded by the two-step fabrication process, which enables the direct and controlled growth of α-Fe 2 O 3 nanoparticles on g-C 3 N 4 . A first ultrasound impregnation step promotes the effective anchoring of stable Fe species via Fe–N and C–N/C–O bonding, while a second microwave phase conversion step induces the subsequent growth of α-Fe 2 O 3 nanoparticles on the g-C 3 N 4 sheets. Careful control of the FeCl 3 precursor concentration up to a threshold value of 0.25 M during impregnation enables complete control over their size and phase. This approach clearly highlights the benefits of microwave reactor systems in the fabrication of hematite-based Z-scheme photocatalytic, overcoming the limitations of conventional thermal treatment technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗