Search NASA⌕ Search

SEARCH · Search NASA

Results for “hydrogen R&D”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

High Resolution Study of 40 Ca to Constrain Potassium Nucleosynthesis in NGC 2419

The globular cluster NGC 2419 was the first to exhibit a Mg-K anticorrelation, linked to hydrogen burning at temperatures between 80-260 MK. However, the key K-destroying reaction, 39 K(p,γ) 40 Ca, has a large rate uncertainty in this range. We significantly constrain this rate with a high resolution 39 K( 3 He,d) 40 Ca study. We resolve the $E$$^{c.m.}_{r}$ = 154 keV resonance in 39 K+p for the first time, increasing the previous rate by up to a factor 13 and reducing its 1σ width by up to a factor of 42. As a result, reaction network calculations for NGC 2419 suggest that this could lower temperatures needed to reproduce the Mg-K anticorrelation.

39 ≤ A ≤ 58↗

Dehydration of δ-AlOOH in Earth’s Deep Lower Mantle

δ -AlOOH has been shown to be stable at the pressure–temperature conditions of the lower mantle. However, its stability remains uncertain at the conditions expected for the lowermost mantle where temperature is expected to rise quickly with increasing depth. Our laser-heated diamond-anvil cell experiments show that δ -AlOOH undergoes dehydration at ∼2000 K above 90 GPa. This dehydration temperature is lower than geotherm temperatures expected at the bottom ∼700 km of the mantle and suggests that δ -AlOOH in warm slabs would dehydrate in this region. Our experiments also show that the released H 2 O from dehydration of δ -AlOOH can react with metallic iron, forming iron oxide, iron hydroxide, and possibly iron hydride. Our observations suggest that H 2 O from the dehydration of subducting slabs, if it occurs, could alter the chemical composition of the surrounding mantle and core regions.

58 GEOSCIENCES↗

Generalized pseudopotential approach for electron-atom scattering.

A generalized many-electron pseudopotential approach is presented for electron-neutral-atom scattering problems. A calculation based on this formulation is carried out for the singlet s-wave and p-wave electron-hydrogen phase shifts with excellent results. We compare the method with other approaches as well as discuss its applications for inelastic and rearrangement collision problems.

Zarlingo, D. G.↗

Mass quantity gauging by RF mode analysis

Work done to date is reported concerning Radio Frequency Mass Quantity Gauging. Experimental apparatus has been designed and tested which measures the resonant frequencies of a tank in the time domain. These frequencies correspond to the total mass of fluid within the tank. Experimental results are discussed for nitrogen and hydrogen in normal gravity both in the supercritical state and also in the two phase (liquid-gas) region. Theoretical discussions for more general cases are given.

Collier, R. S.↗

Solar wind and terrestrial atmosphere effects on lunar sample surface composition

Samples returned from the Apollo missions have been shown to have undergone a partial surface oxidation with the degree of oxidation being dependent on the intensity and duration of exposure to a terrestrial or other oxidizing atmosphere. Exposure to atomic hydrogen at room temperature, or molecular hydrogen above 100 C results in a surface reduction. The adsorption of water vapor on a test sample was found to be only slightly dependent on the state of surface oxidation, a situation consistent with the formation of hydroxyl groups on the surface when a sample is exposed to hydrogen. That hydroxyl groups are indeed formed is substantiated by the release of water vapor (and by release of heavy water following exposure to deuterium), indicating that water vapor can be synthesized from solar wind hydrogen and sample oxygen. Observations of trace amounts of methane indicate that the reduction process is by no means restricted to the formation of water vapor.

Cadenhead, D. A.↗

Tensile properties of palladium-silver alloys with absorbed hydrogen

The alloys 90Pd-10Ag, 80Pd-20Ag, 70Pd-30Ag, 60Pd-40Ag, and 50Pd-50Ag containing absorbed hydrogen were tested in tension. The results show the tensile properties to be independent of the phase transition. Also, hydrogen in the lattice does not necessarily cause embrittlement or poor elongation. The changes in the tensile properties appear dependent on the electron to atom site ratio.

Smith, R. J.↗

Concentrations of CH4, CO, CO2, H2, H2O and N2O in the upper stratosphere

On 23 May 1973 a cryogenic air sampler was flown on an Aerobee rocket from White Sands Missile Range. A large air sample was collected between 40 and 50 km altitude and successfully recovered for water vapor and trace gas analysis. The results were as follows: water vapor, 4.0 (+1.3 or - 0.9) ppmV; methane, 0.37 + or - 0.01 ppmV; molecular hydrogen, 0.47 + or - 0.02 ppmV; carbon monoxide, 0.05 + or - 0.01 ppmV; carbon dioxide, 316.2 + or - 2.8 ppmV; and nitrous oxide, 3 + or - 7 ppb.

Ehhalt, D. H.↗

Air Force nickel hydrogen cells

A 3.5 in. diameter, nominal 15A h cell went into advanced development in 1976 and is still in advanced development. The development of common pressure vessel nickel hydrogen modules is explored. The concept is to put a number of nickel hydrogen cells into one pressure vessel. There is a very modest advantage in terms of weight energy density, but a substantial advantage in both volume energy density and cost.

Warnock, D. R.↗

Trail of the Crab progenitor star

It is proposed that the jet which has been observed protruding from the northern rim of the Crab Nebula is a tubular trail of material lost by the presupernova star during its red giant phase. The movement of the red giant's stellar wind is analyzed to show that the mass profile downstream should be concentrated within a narrow cylinder. The parameters of the tube predicted by this model are presented and an observational test of the model based on the hydrogen-to-helium abundance ratio in the jet and in the Nebula as a whole is suggested; the model predicts that the ratio in the jet should be larger.

Blandford, R. D.↗

Wind Enhanced Escape, Ion Pickup and the Evolution of Water on Mars

Preferential loss of hydrogen over deuterium from Mars has produced a deuterium rich atmosphere possessing a D/B ratio 5.2 times that of terrestrial water. Rayleigh fractionation is applied, constrained by the deuterium enrichment factor, to determine the magnitudes of ancient and present water reservoirs on the planet. The dominant lose mechanisms of R and D from the current atmosphere are thought to be thermal escape and solar wind ion pickup of the neutral and ion forms of theme constituents, respectively. During an earlier martian epoch, only thermal escape was significant because Mars had a terrestrial sized magnetosphere that protected the atmosphere from solar wind scavenging processes. The magnitudes of present and ancient water reservoirs are estimated when thermal escape is considered alone and subsequently when the effects of ion pickup are added. The escape fluxes of R and D are significantly increased above the respective Jeans fluxes when the effects of thermospheric winds and planetary rotation are accounted for at the exobase. Such wind enhanced escape also increases as the mass of an escaping constituent increases; thus, the increase in the escape flux of D is greater than that of H. When the fractionation process is also constrained by the D/H ratio observed in hydrous minerals of SNC meteorites, an ancient crustal reservoir of Martian water in derived, tens of meters in global-equivalent depth, considerably exceeding that obtained with no winds. The reservoir becomes even larger when ion pickup processes are added.

Hartle, Richard↗

The Low Energy Effective Area of the Chandra Low Energy Transmission Grating Spectrograph

The Chandra X-ray Observatory was successfully launched on July 23, 1999, and subsequently began an intensive calibration phase. We present the preliminary results from the in-flight calibration of the low energy response of the High Resolution Camera spectroscopic readout (HRC-S) combined with the Low Energy Transmission Grating (LETG) aboard Chandra. These instruments comprise the Low Energy Transmission Grating Spectrograph (LETGS). For this calibration study, we employ a pure hydrogen non-LTE white dwarf emission model (T = 25000 K and log g = 9.0) for comparison with the Chandra observations of Sirius B. The pre-flight calibration of the LETGS effective area only covered wavelengths shortward of 44 A (E less than 277 eV). Our Sirius B analysis shows that the HRC-S quantum efficiency (QE) model assumed for longer wavelengths leads to an overestimate of the effective area by an average factor of about 1.6. We derive a correction to the low energy HRC-S QE model to match the predicted and observed Sirius B spectra over the wavelength range of 44-185 A. We make an independent test of our results by the comparison of a Chandra LETGS observation of HZ 43 with pure hydrogen model atmosphere predictions and find good agreement.

Pease, D.↗

Mechanisms of O2 Sputtering from Water Ice by keV Ions

We have conducted experiments on the sputtering of water ice by 100 keV Ar(+) between 20 and 150 K. Our findings indicate that the temperature dependence of the total sputtering yield is heavily influenced by the thermal and irradiation history of the ice, showing a complex dependence on irradiation fluence that is correlated to the ejection of O2 molecules. The results suggest that O2 produced by the ions inside the ice diffuses to the surface where it is trapped and then ejected via sputtering or thermal desorption. A high concentration of O2 can trap in a subsurface layer during bombardment at 130 K, which we relate to the formation of hydrogen and its escape from that region. A simple model allows us to determine the depth profile of the absolute concentration of O2 trapped in the ice.

Teolis, B. D.↗

Photothermal alternative to device fabrication using atomic precision advanced manufacturing techniques

The attachment of dopant precursor molecules to depassivated areas of hydrogen-terminated silicon templated with a scanning tunneling microscope (STM) has been used to create electronic devices with subnanometer precision, typically for quantum physics experiments. This process, which we call atomic precision advanced manufacturing (APAM), dopes silicon beyond the solid-solubility limit and produces electrical and optical characteristics that may also be useful for microelectronic and plasmonic applications. However, scanned probe lithography lacks the throughput required to develop more sophisticated applications. In this work, we demonstrate and characterize an APAM device workflow where scanned probe lithography of the atomic layer resist has been replaced by photolithography. An ultraviolet laser is shown to locally and controllably heat silicon above the temperature required for hydrogen depassivation on a nanosecond timescale, a process resistant to under- and overexposure. STM images indicate a narrow range of energy density where the surface is both depassivated and undamaged. Modeling that accounts for photothermal heating and the subsequent hydrogen desorption kinetics suggests that the silicon surface temperatures reached in our patterning process exceed those required for hydrogen removal in temperature-programmed desorption experiments. A phosphorus-doped van der Pauw structure made by sequentially photodepassivating a predefined area and then exposing it to phosphine is found to have a similar mobility and higher carrier density compared with devices patterned by STM. Lastly, it is also demonstrated that photodepassivation and precursor exposure steps may be performed concomitantly, a potential route to enabling APAM outside of ultrahigh vacuum.

nanoscale devices↗

Sustainable, Net-Zero Carbon Steelmaking Utilizing Nuclear and Renewable-based Integrated Energy Systems

Decarbonizing Steelmaking: Emissions Background Industrial processes (including power) account for 28% of global CO2 emissions dominated by steel, cement, NH3, ethylene. Steel accounts for 7% of global CO2 emissions (25% of Industrial), 2-3 Gigatonnes annually. Given long asset life and large investments in steel industry, recommend: Detailed analysis, materials R&D and pre-pilot technology integration required by 2030 to position U.S. industry for an investment decision for building first net-zero integrated steel plan Symposium site: https://www.aiche.org/cei/conferences/competitive-energy-systems/2021

08 HYDROGEN↗

Filled polymers for bearings and seals used in liquid hydrogen

Filled polytrifluorochloroethylene /PTFCE/ shows better thermal stability, less creep, and higher compressive moduli than filled polytetrafluoroethylene /PTFE/. Bearing and seal materials exhibiting the best characteristics contain a high percentage of PTFCE.

Johnson, R. L.↗

Heat-transfer data for hydrogen

Information is given regarding experimental heat-transfer data compiled for the turbulent flow of hydrogen within straight, electrically heated, round cross section tubes. Tube materials, test conditions, parameters studied, and generalized conclusions are presented.

Mc Carthy, J. R.↗

The helium abundance of Jupiter from Voyager

The helium abundance in the Jovian atmosphere is derived from Voyager 1 data by two methods. The first method uses only infrared spectra from selected locations on the planet while the second method uses a thermal profile independently derived from radio occultation measurements and infrared spectra recorded near the occultation point. A hydrogen mole fraction of 0.897 plus or minus 0.030 is obtained from the first method, while the second method gives 0.880 plus or minus 0.036, corresponding to helium mass fractions of 0.19 plus or minus 0.05 and 0.21 plus or minus 0.06, respectively. The estimated errors for the first method are primarily due to systematic uncertainties in the H2 and He absorption coefficients, while those for the second method result mainly from errors in the radio occultation profile and are less well known. Random errors in the measured infrared spectra are found to be negligible in both cases. The results are consistent with a uniform mix of hydrogen and helium within Jupiter's interior, but a modest amount of helium depletion (Delta Y equal to or less than 0.05) cannot be excluded.

Gautier, D.↗