SEARCH · Search NASA

Results for “implicit solvers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

Nonlinear Nonmodal Analysis of Hypersonic Flow over Blunt Cones

The linear amplification of modal disturbances that lead to boundary-layer transition in two-dimensional/axisymmetric hypersonic configurations is strongly reduced by the presence of a blunt nosetip, and the mechanisms underlying the observed onset of transition over the cone frustum are currently unknown. Linear nonmodal analysis has shown that both planar and oblique traveling disturbances that peak within the entropy layer experience appreciable energy amplification for moderate to large nosetip bluntness. The present study extends the previous linear analysis by including the nonlinear effects. Specifically, the perturbation form of the 2D, harmonic Navier-Stokes equations (HNSE) are solved with a fully implicit formulation and the Newton-Raphson method. The increased number of degrees of freedom for the nonlinear system presents difficulties for solution strategies based on direct solution of the linearized system. Such difficulties are overcome by using the GMRES iterative method with a preconditioner corresponding to a simplified Jacobian without the cross derivative terms. The HNSE solver is verified by comparing with nonlinear parabolized stability equation (NPSE) results for the nonlinear evolution of planar waves in an incompressible Blasius boundary layer and in a Mach 6 flow over a blunt cone. Finally, nonlinear nonmodal results are presented for planar traveling disturbances over the blunt cone. The nonmodal analysis demonstrates that entropy-layer disturbances generated close to the nose tip can seed the amplification of higher frequency Mack’s second-mode instabilities further downstream.

boundary layer transition↗

NASA NTRS1992

Quality assessment of two- and three-dimensional unstructured meshes and validation of an upwind Euler flow solver

Quality assessment procedures are described for two-dimensional unstructured meshes. The procedures include measurement of minimum angles, element aspect ratios, stretching, and element skewness. Meshes about the ONERA M6 wing and the Boeing 747 transport configuration are generated using an advancing front method grid generation package of programs. Solutions of Euler's equations for these meshes are obtained at low angle-of-attack, transonic conditions. Results for these cases, obtained as part of a validation study demonstrate accuracy of an implicit upwind Euler solution algorithm.

Woodard, Paul R.↗

DOE OSTI2015

Partitioned coupling strategies for multi-physically coupled radiative heat transfer problems

This article aims to propose new aspects concerning a partitioned solution strategy for multi-physically coupled fields including the physics of thermal radiation. Particularly, we focus on the partitioned treatment of electro–thermo-mechanical problems with an additional fourth thermal radiation field. One of the main goals is to take advantage of the flexibility of the partitioned approach to enable combinations of different simulation software and solvers. Within the frame of this article, we limit ourselves to the case of nonlinear thermoelasticity at finite strains, using temperature-dependent material parameters. For the thermal radiation field, diffuse radiating surfaces and gray participating media are assumed. Moreover, we present a robust and fast partitioned coupling strategy for the fourth field problem. Stability and efficiency of the implicit coupling algorithm are improved drawing on several methods to stabilize and to accelerate the convergence. To conclude and to review the effectiveness and the advantages of the additional thermal radiation field several numerical examples are considered to study the proposed algorithm. In particular we focus on an industrial application, namely the electro–thermo-mechanical modeling of the field-assisted sintering technology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2023

A sharp immersed method for 2D flow-body interactions using the vorticity-velocity Navier-Stokes equations

Immersed methods discretize boundary conditions for complex geometries on background Cartesian grids. Here, this makes such methods especially suitable for two-way coupled flow-body problems, where the body mechanics are partially driven by hydrodynamic forces. However, for the vorticity-velocity form of the Navier-Stokes equations, existing immersed geometry discretizations for two-way coupled problems only achieve first order spatial accuracy near solid boundaries. Here we introduce a sharp-interface approach based on the immersed interface method to handle the one- and two-way coupling between an incompressible flow and one or more rigid bodies using the 2D vorticity-velocity Navier-Stokes equations. Our main contributions are three-fold. First, we develop and analyze a moving boundary treatment for sharp immersed methods that can be applied to PDEs with implicitly defined boundary conditions, such as those commonly imposed on the vorticity field. Second, we develop a two-way coupling methodology for the vorticity-velocity Navier-Stokes equations based on control-volume momentum balance that does not require the pressure field. Third, we show through extensive testing and validation that our resulting flow-body solver reaches second-order accuracy for most practical scenarios, and provides significant efficiency benefits compared to a representative first-order approach.

42 ENGINEERING↗

DOE OSTI2025

The latent variable proximal point algorithm for variational problems with inequality constraints

The latent variable proximal point (LVPP) algorithm is a framework for solving infinite-dimensional variational problems with pointwise inequality constraints. The algorithm is a saddle point reformulation of the Bregman proximal point algorithm. At the continuous level, the two formulations are equivalent, but the saddle point formulation is more amenable to discretization because it introduces a structure-preserving transformation between a latent function space and the feasible set. Working in this latent space is much more convenient for enforcing inequality constraints than the feasible set, as discretizations can employ general linear combinations of suitable basis functions, and nonlinear solvers can involve general additive updates. LVPP yields numerical methods with observed mesh-independence for obstacle problems, contact, fracture, plasticity, and others besides; in many cases, for the first time. The framework also extends to more complex constraints, providing means to enforce convexity in the Monge–Ampère equation and handling quasi-variational inequalities, where the underlying constraint depends implicitly on the unknown solution. Here, in this paper, we describe the LVPP algorithm in a general form and apply it to ten problems from across mathematics.

Inequality constraints↗

NASA NTRS1992

Quality assessment of two- and three-dimensional unstructured meshes and validation of an upwind Euler flow solver

Quality assessment procedures are described for two-dimensional and three-dimensional unstructured meshes. The procedures include measurement of minimum angles, element aspect ratios, stretching, and element skewness. Meshes about the ONERA M6 wing and the Boeing 747 transport configuration are generated using an advancing front method grid generation package of programs. Solutions of Euler's equations for these meshes are obtained at low angle-of-attack, transonic conditions. Results for these cases, obtained as part of a validation study demonstrate the accuracy of an implicit upwind Euler solution algorithm.

Woodard, Paul R.↗

NASA NTRS1992

Investigation of upwind, multigrid, multiblock numerical schemes for three dimensional flows. Volume 1: Runge-Kutta methods for a thin layer Navier-Stokes solver

A state-of-the-art computer code has been developed that incorporates a modified Runge-Kutta time integration scheme, upwind numerical techniques, multigrid acceleration, and multi-block capabilities (RUMM). A three-dimensional thin-layer formulation of the Navier-Stokes equations is employed. For turbulent flow cases, the Baldwin-Lomax algebraic turbulence model is used. Two different upwind techniques are available: van Leer's flux-vector splitting and Roe's flux-difference splitting. Full approximation multi-grid plus implicit residual and corrector smoothing were implemented to enhance the rate of convergence. Multi-block capabilities were developed to provide geometric flexibility. This feature allows the developed computer code to accommodate any grid topology or grid configuration with multiple topologies. The results shown in this dissertation were chosen to validate the computer code and display its geometric flexibility, which is provided by the multi-block structure.

Cannizzaro, Frank E.↗

DOE OSTI2015

Assessing a mini-application as a performance proxy for a finite element method engineering application

The performance of a large-scale, production-quality science and engineering application (‘app’) is often dominated by a small subset of the code. Even within that subset, computational and data access patterns are often repeated, so that an even smaller portion can represent the performance-impacting features. If application developers, parallel computing experts, and computer architects can together identify this representative subset and then develop a small mini-application (‘miniapp’) that can capture these primary performance characteristics, then this miniapp can be used to both improve the performance of the app as well as provide a tool for co-design for the high-performance computing community. However, a critical question is whether a miniapp can effectively capture key performance behavior of an app. This study provides a comparison of an implicit finite element semiconductor device modeling app on unstructured meshes with an implicit finite element miniapp on unstructured meshes. The goal is to assess whether the miniapp is predictive of the performance of the app. Finally, single compute node performance will be compared, as well as scaling up to 16,000 cores. Results indicate that the miniapp can be reasonably predictive of the performance characteristics of the app for a single iteration of the solver on a single compute node.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2013

Generalized fictitious methods for fluid–structure interactions: Analysis and simulations

We present a new fictitious pressure method for fluid–structure interaction (FSI) problems in incompressible flow by generalizing the fictitious mass and damping methods we published previously in [1]. The fictitious pressure method involves modification of the fluid solver whereas the fictitious mass and damping methods modify the structure solver. We analyze all fictitious methods for simplified problems and obtain explicit expressions for the optimal reduction factor (convergence rate index) at the FSI interface [2]. This analysis also demonstrates an apparent similarity of fictitious methods to the FSI approach based on Robin boundary conditions, which have been found to be very effective in FSI problems. We implement all methods, including the semi-implicit Robin based coupling method, in the context of spectral element discretization, which is more sensitive to temporal instabilities than low-order methods. However, the methods we present here are simple and general, and hence applicable to FSI based on any other spatial discretization. In numerical tests, we verify the selection of optimal values for the fictitious parameters for simplified problems and for vortex-induced vibrations (VIV) even at zero mass ratio (“for-ever-resonance”). We also develop an empirical a posteriori analysis for complex geometries and apply it to 3D patient-specific flexible brain arteries with aneurysms for very large deformations. We demonstrate that the fictitious pressure method enhances stability and convergence, and is comparable or better in most cases to the Robin approach or the other fictitious methods.

Computer Science↗

NASA NTRS1989

Supersonic flow computations by two-equation turbulence modeling

In the present work a solver for the Reynolds averaged compressible Navier-Stokes equations, to compute high speed turbulent flows characterized by interacting shock waves and viscous layers, is presented. A k-epsilon turbulence model that accounts for compressibility effects is developed. The numerical algorithm is based on a finite volume multistage Runge Kutta technique that is explicit for the solution of the mean flow variables, and implicit for the solution of the k-epsilon equations. The model is validated by extensive comparison with experimental results of flows over compression ramps characterized by interacting shock waves/boundary layers.

Grasso, Francesco↗

NASA NTRS2019

Streamlined Convergence Acceleration for CFD Codes

Enigma, a simplified interface to the PETSc library, is shown to enable the rapid solution of discrete partial differential equations. Two CFD codes, LAURA and HyperSolve, use Enigma to compute steady solutions of the Navier-Stokes equations. Using PETSc, Enigma is shown to provide a Jacobian-Free Newton-Krylov method (JFNK), globalized with pseudotransient continuation, that improves efficiency over the point-implicit relaxation method traditionally used by LAURA. It is shown that iterative error has a large impact on surface heat transfer predicted by LAURA on an axisymmetric sphere-cone geometry. Also, the convergence rate of HyperSolve simulating subsonic flow over a delta wing geometry with the JFNK method is shown to be more efficient than employing a defect correction method as the nonlinear solver.

Thompson, Kyle B.↗

DOE OSTI2022

Extension of the high-resolution thermal-hydraulics code ESCOT to hexagonal core geometries for multi-physics calculations

The extension of the capabilities of the pin-level nuclear reactor core thermal-hydraulics (T/H) code ESCOT to analyze hexagonal fueled cores and its performance are presented. ESCOT is an accurate yet fast core thermal-hydraulics solution aiming at high-fidelity and high-resolution multi-physics core analysis in the framework of massively parallel computing platforms. Its algorithm solution is based on the four-equation drift-flux model for two-phase calculations, these are numerically solved by applying the Finite Volume Method (FVM) and the Semi-Implicit Method for Pressure-Linked Equation (SIMPLE)-like algorithm in a staggered grid system. Constitutive models such as turbulent mixing, pressure drop, and vapor generation are employed to simulate key phenomena in subchannel-scale analysis. ESCOT is parallelized by a double (radial and axial) domain decomposition that enables its highly parallelized execution. The coupling of the code with the neutronics whole core solver for hexagonal geometries nTRACER is described. The newly implemented ESCOT features are validated by comparing single assembly and full core steady state nTRACER-ESCOT solutions with nTRACER standalone internal one-dimensional T/H solver results. The validation problems are based on the VVER 440 and VVER 1000 cores. ESCOT results show differences within an acceptable range with respect to the simple 1D nTRACER built-in solver. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

NASA NTRS1990

Investigation of advanced counterrotation blade configuration concepts for high speed turboprop systems, task 1: Ducted propfan analysis

The time-dependent three-dimensional Euler equations of gas dynamics were solved numerically to study the steady compressible transonic flow about ducted propfan propulsion systems. Aerodynamic calculations were based on a four-stage Runge-Kutta time-marching finite volume solution technique with added numerical dissipation. An implicit residual smoothing operator was used to aid convergence. Two calculation grids were employed in this study. The first grid utilized an H-type mesh network with a branch cut opening to represent the axisymmetric cowl. The second grid utilized a multiple-block mesh system with a C-type grid about the cowl. The individual blocks were numerically coupled in the Euler solver. Grid systems were generated by a combined algebraic/elliptic algortihm developed specifically for ducted propfans. Numerical calculations were initially performed for unducted propfans to verify the accuracy of the three-dimensional Euler formulation. The Euler analyses were then applied for the calculation of ducted propfan flows, and predicted results were compared with experimental data for two cases. The three-dimensional Euler analyses displayed exceptional accuracy, although certain parameters were observed to be very sensitive to geometric deflections. Both solution schemes were found to be very robust and demonstrated nearly equal efficiency and accuracy, although it was observed that the multi-block C-grid formulation provided somewhat better resolution of the cowl leading edge region.

Hall, Edward J.↗

NASA NTRS1993

A global multilevel atmospheric model using a vector semi-Lagrangian finite-difference scheme. I - Adiabatic formulation

An adiabatic global multilevel primitive equation model using a two time-level, semi-Lagrangian semi-implicit finite-difference integration scheme is presented. A Lorenz grid is used for vertical discretization and a C grid for the horizontal discretization. The momentum equation is discretized in vector form, thus avoiding problems near the poles. The 3D model equations are reduced by a linear transformation to a set of 2D elliptic equations, whose solution is found by means of an efficient direct solver. The model (with minimal physics) is integrated for 10 days starting from an initialized state derived from real data. A resolution of 16 levels in the vertical is used, with various horizontal resolutions. The model is found to be stable and efficient, and to give realistic output fields. Integrations with time steps of 10 min, 30 min, and 1 h are compared, and the differences are found to be acceptable.

Bates, J. R.↗

DOE OSTI2017

A scalable nonlinear fluid–structure interaction solver based on a Schwarz preconditioner with isogeometric unstructured coarse spaces in 3D

Nonlinear fluid-structure interaction (FSI) problems on unstructured meshes in 3D appear many applications in science and engineering, such as vibration analysis of aircrafts and patient-specific diagnosis of cardiovascular diseases. In this work, we develop a highly scalable, parallel algorithmic and software framework for FSI problems consisting of a nonlinear fluid system and a nonlinear solid system, that are coupled monolithically. The FSI system is discretized by a stabilized finite element method in space and a fully implicit backward difference scheme in time. To solve the large, sparse system of nonlinear algebraic equations at each time step, we propose an inexact Newton-Krylov method together with a multilevel, smoothed Schwarz preconditioner with isogeometric coarse meshes generated by a geometry preserving coarsening algorithm. Here ''geometry'' includes the boundary of the computational domain and the wet interface between the fluid and the solid. We show numerically that the proposed algorithm and implementation are highly scalable in terms of the number of linear and nonlinear iterations and the total compute time on a supercomputer with more than 10,000 processor cores for several problems with hundreds of millions of unknowns.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2024

A fast, matrix-based method to perform omnidirectional pressure integration

Abstract Experimentally-measured pressure fields play an important role in understanding many fluid dynamics problems. Unfortunately, pressure fields are difficult to measure directly with non-invasive, spatially resolved diagnostics, and calculations of pressure from velocity have proven sensitive to error in the data. Omnidirectional line integration methods are usually more accurate and robust to these effects as compared to implicit Poisson equations, but have seen slower uptake due to the higher computational and memory costs, particularly in 3D domains. This paper demonstrates how omnidirectional line integration approaches can be converted to a matrix inversion problem. This novel formulation uses an iterative approach so that the boundary conditions are updated each step, preserving the convergence behavior of omnidirectional schemes while also keeping the computational efficiency of Poisson solvers. This method is implemented in Matlab and also as a GPU-accelerated code in CUDA-C++. The behavior of the new method is demonstrated on 2D and 3D synthetic and experimental data. Three-dimensional grid sizes of up to 125 million grid points are tractable with this method, opening exciting opportunities to perform volumetric pressure field estimation from 3D PIV measurements.

42 ENGINEERING↗

DOE OSTI2013

Adaptive Implicit Non-Equilibrium Radiation Diffusion

We describe methods for accurate and efficient long term time integra- tion of non-equilibrium radiation diffusion systems: implicit time integration for effi- cient long term time integration of stiff multiphysics systems, local control theory based step size control to minimize the required global number of time steps while control- ling accuracy, dynamic 3D adaptive mesh refinement (AMR) to minimize memory and computational costs, Jacobian Free Newton-Krylov methods on AMR grids for efficient nonlinear solution, and optimal multilevel preconditioner components that provide level independent solver convergence.

Philip, Bobby↗

DOE OSTI2018

Verification of iterative matrix solutions for multipoint kinetics equations

Multipoint kinetic equation systems have been solved numerically using matrix algebra software and 1st to 4th order implicit schemes based on single-step matrix propagators. These matrix schemes have been validated successfully on demanding point kinetics benchmarks with various prescribed reactivity insertions. Verification tests have also been performed on a simple 3-region fast reactor core model with asymmetric step or ramp reactivity insertions and cross-checked with the multipoint kinetics SACRE code developed at INL and based on existing and validated stiff ODE solver packages. Accurate results can be obtained at a limited time expense. The reason for intriguing results obtained in some transients has been elucidated and linked to the multipoint matrix coefficient interpolation method during the transient.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗