Search NASA⌕ Search

SEARCH · Search NASA

Results for “linear dynamical systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Dual characterizations of optimal systems.

The complementary variational principle developed in a Hilbert space setting provides a duality principle in the calculus of variations with dynamic constraints. This concept is adopted in this paper to investigate dual characterizations of optimal control systems. Systems under consideration include those with dynamics governed by linear ordinary differential equations, linear partial differential equations and non-linear ordinary differential equations.

Chan, W. L.↗

Digital adaptive flight control design using single stage model following indices

Simple mechanical linkages are often unable to cope with many control problems associated with high-performance aircraft. This has led to the development of digital fly-by-wire control systems and in particular digital adaptive controllers that can be efficiently adjusted during system operation. To this effect, a control law has been derived based upon the minimization of a single-stage weighted combination of control energy and the squared error between the states of a linear plant and model. This control logic is interfaced with an on-line weighted least-squares estimator and a Kalman state filter. The utility of the resultant control system is illustrated by its application to the linearized dynamics of a typical fighter aircraft.

Alag, G.↗

The generalized pole assignment problem

Two dynamic output feedback problems for a linear, strictly proper system are considered, along with their interrelationships. The problems are formulated in the frequency domain and investigated in terms of linear equations over rings of polynomials. Necessary and sufficient conditions are expressed using genericity.

Djaferis, T. E.↗

Simulation of liquid propellant rocket engine combustion instabilities

A simulation technique for studying the high frequency combustion instabilities of liquid propellant rocket engines has been developed and used to investigate various aspects of instability phenomena. Of importance was investigation of the significance of the method of coupling the combustion and the gas dynamics of the system. Two coupling processes were studied: linear response of the combustion process to pressure fluctuations, and the nature of the resulting instabilities; and nonlinear response of the combustion process to velocity fluctuations, and the nature of the resulting instabilities. For the combustion model studied, nonlinear (velocity) coupling was found to more closely characterize liquid propellant instabilities.

Ventrice, M. B.↗

The generalized pole assignment problem

For some linear, strictly proper system given by its transfer function, two dynamic output feedback problems can be posed. The first one is that of using dynamic-output feedback to assign the closed-loop characteristic polynomial and the second that of assigning the closed-loop invariant factors. These problems and their interrelationships are discussed. The formulation is done in the frequency domain and the investigation carried out from an algebraic point of view, in terms of linear equations over rings of polynomials. Using the notion of genericity, several necessary and sufficient conditions are expressed.

Djaferis, T. E.↗

Principles for problem aggregation and assignment in medium scale multiprocessors

One of the most important issues in parallel processing is the mapping of workload to processors. This paper considers a large class of problems having a high degree of potential fine grained parallelism, and execution requirements that are either not predictable, or are too costly to predict. The main issues in mapping such a problem onto medium scale multiprocessors are those of aggregation and assignment. We study a method of parameterized aggregation that makes few assumptions about the workload. The mapping of aggregate units of work onto processors is uniform, and exploits locality of workload intensity to balance the unknown workload. In general, a finer aggregate granularity leads to a better balance at the price of increased communication/synchronization costs; the aggregation parameters can be adjusted to find a reasonable granularity. The effectiveness of this scheme is demonstrated on three model problems: an adaptive one-dimensional fluid dynamics problem with message passing, a sparse triangular linear system solver on both a shared memory and a message-passing machine, and a two-dimensional time-driven battlefield simulation employing message passing. Using the model problems, the tradeoffs are studied between balanced workload and the communication/synchronization costs. Finally, an analytical model is used to explain why the method balances workload and minimizes the variance in system behavior.

Nicol, David M.↗

Rapid slewing of the orbiting Spacecraft Control Laboratory Experiment (SCOLE) using LQR techniques

The rotational equations of motion, describing the dynamics of the (rigidized) proposed orbiting Spacecraft Control Laboratory Experiment (SCOLE) during the station keeping phase, are derived using the Eulerian formulation. When the attitude angles (roll, pitch, and yaw) are assumed small, a stability analysis is conducted for the system. It is seen that the pitch equation decouples from the roll and yaw equations when the interface between the mast on the reflector is not offset or the offset is only along the Shuttle roll axis. When a second offset is introduced along the pitch axis of the system and when the gravity-gradient torques are present in the dynamics, the system assumes a new equilibrium position. The linear regulator theory is used to derive a control law for the linear model of the rigidized SCOLE. This law is applied to the nonlinear model of the same configuration of the system and preliminary single axis slewing maneuvers (20 deg amplitude) are simulated.

Diarra, Cheick M.↗

Enhanced Spectral Anisotropies Near the Proton-Cyclotron Scale: Possible Two-Component Structure in Hall-FLR MHD Turbulence Simulations

Recent analysis of the magnetic correlation function of solar wind fluctuations at 1 AU suggests the existence of two-component structure near the proton-cyclotron scale. Here we use two-and-one-half dimensional and three-dimensional compressible MHD models to look for two-component structure adjacent the proton-cyclotron scale. Our MHD system incorporates both Hall and Finite Larmor Radius (FLR) terms. We find that strong spectral anisotropies appear adjacent the proton-cyclotron scales depending on selections of initial condition and plasma beta. These anisotropies are enhancements on top of related anisotropies that appear in standard MHD turbulence in the presence of a mean magnetic field and are suggestive of one turbulence component along the inertial scales and another component adjacent the dissipative scales. We compute the relative strengths of linear and nonlinear accelerations on the velocity and magnetic fields to gauge the relative influence of terms that drive the system with wave-like (linear) versus turbulent (nonlinear) dynamics.

Ghosh, Sanjoy↗

Online Output-Based Inertia Estimation of Modern Power Systems

The overall inertia of modern power systems is drastically impacted by the penetration level of converter-based resources (CBRs). The intermittent output of CBRs and their dependence on the weather conditions affirm the need for a realtime inertia estimation approach. This can help the transmission system operators(TSOs) to be continuously aware of the changes in the system inertia and to take suitable control actions. This paper is a step forward to a totally data-driven framework for power system inertia estimation using the available measurements from the phasor measurement units (PMUs). This inertia estimation is done based on the spectral analysis of the so-called Koopman linear operator. Koopman operator considers the relationship between the system's inertia and its dynamical response to slight disturbances in the load. Simulation results show that Koopman operator can approximate the system behavior in a reconstructed linear space hence inertia constant is estimated accurately.

data-driven↗

Stirling System Modeling for Space Nuclear Power Systems

A dynamic model of a high-power Stirling convertor has been developed for space nuclear power systems modeling. The model is based on the Component Test Power Convertor (CTPC), a 12.5-kWe free-piston Stirling convertor. The model includes the fluid heat source, the Stirling convertor, output power and heat rejection. The Stirling convertor model includes the Stirling cycle thermodynamics, heat flow, mechanical mass-spring damper systems, and the linear alternator. The model was validated against test data. Both nonlinear and linear versions of the model were developed. The linear version algebraically couples two separate linear dynamic models; one model of the Stirling cycle and one model of the thermal system, through the pressure factors. Future possible uses of the Stirling system dynamic model are discussed. A pair of commercially available 1-kWe Stirling convertors is being purchased by NASA Glenn Research Center. The specifications of those convertors may eventually be incorporated into the dynamic model and analysis compared to the convertor test data. Subsequent potential testing could include integrating the convertors into a pumped liquid metal hot-end interface. This test would provide more data for comparison to the dynamic model analysis.

Lewandowski, Edward J.↗

Stirling System Modeling for Space Nuclear Power Systems

A dynamic model of a high-power Stirling convertor has been developed for space nuclear power systems modeling. The model is based on the Component Test Power Convertor (CTPC), a 12.5-kWe free-piston Stirling convertor. The model includes the fluid heat source, the Stirling convertor, output power, and heat rejection. The Stirling convertor model includes the Stirling cycle thermodynamics, heat flow, mechanical mass-spring damper systems, and the linear alternator. The model was validated against test data. Both nonlinear and linear versions of the model were developed. The linear version algebraically couples two separate linear dynamic models; one model of the Stirling cycle and one model of the thermal system, through the pressure factors. Future possible uses of the Stirling system dynamic model are discussed. A pair of commercially available 1-kWe Stirling convertors is being purchased by NASA Glenn Research Center. The specifications of those convertors may eventually be incorporated into the dynamic model and analysis compared to the convertor test data. Subsequent potential testing could include integrating the convertors into a pumped liquid metal hot-end interface. This test would provide more data for comparison to the dynamic model analysis.

Lewandowski, Edward J.↗

The uncertainty threshold principle - Fundamental limitations of optimal decision making under dynamic uncertainty

The fundamental limitations of the optimal control of dynamic systems with random parameters are analyzed by studying a scalar linear-quadratic optimal control example. It is demonstrated that optimum long-range decision making is possible only if the dynamic uncertainty (quantified by the means and covariances of the random parameters) is below a certain threshold. If this threshold is exceeded, there do not exist optimum decision rules. This phenomenon is called the 'uncertainty threshold principle'. The implications of this phenomenon to the field of modelling, identification, and adaptive control are discussed.

Athans, M.↗

Indirect learning control for nonlinear dynamical systems

In a previous paper, learning control algorithms were developed based on adaptive control ideas for linear time variant systems. The learning control methods were shown to have certain advantages over their adaptive control counterparts, such as the ability to produce zero tracking error in time varying systems, and the ability to eliminate repetitive disturbances. In recent years, certain adaptive control algorithms have been developed for multi-body dynamic systems such as robots, with global guaranteed convergence to zero tracking error for the nonlinear system euations. In this paper we study the relationship between such adaptive control methods designed for this specific class of nonlinear systems, and the learning control problem for such systems, seeking to converge to zero tracking error in following a specific command repeatedly, starting from the same initial conditions each time. The extension of these methods from the adaptive control problem to the learning control problem is seen to be trivial. The advantages and disadvantages of using learning control based on such adaptive control concepts for nonlinear systems, and the use of other currently available learning control algorithms are discussed.

Ryu, Yeong Soon↗

Use of a Linear Paul Trap to Study Random Noise-Induced Beam Degradation in High-Intensity Accelerators

A random noise-induced beam degradation that can affect intense beam transport over long propagation distances has been experimentally studied by making use of the transverse beam dynamics equivalence between an alternating-gradient (AG) focusing system and a linear Paul trap system. For the present studies, machine imperfections in the quadrupole focusing lattice are considered, which are emulated by adding small random noise on the voltage waveform of the quadrupole electrodes in the Paul trap. It is observed that externally driven noise continuously produces a nonthermal tail of trapped ions, and increases the transverse emittance almost linearly with the duration of the noise.

43 PARTICLE ACCELERATORS↗

Modeling of multi-rotor torsional vibrations in rotating machinery using substructuring

The application of FEM modeling techniques to the analysis of torsional vibrations in complex rotating systems is described and demonstrated, summarizing results reported by Soares (1985). A substructuring approach is used for determination of torsional natural frequencies and resonant-mode shapes, steady-state frequency-sweep analysis, identification of dynamically unstable speed ranges, and characterization of transient linear and nonlinear systems. Results for several sample problems are presented in diagrams, graphs, and tables. STORV, a computer code based on this approach, is in use as a preliminary design tool for drive-train torsional analysis in the High Altitude Wind Tunnel at NASA Lewis.

Soares, Fola R.↗

Fermionic mean-field dynamics for spin systems beyond free fermions

We introduce the fermionized time-dependent Hartree–Fock (fTDHF), a real-time quantum dynamics method for spin-1/2 Hamiltonians following their mapping to fermions via the Jordan-Wigner transformation. fTDHF is formally equivalent to exact dynamics in the case of free fermions, and can efficiently handle non-local string operators arising from long-range interactions via transition matrix elements between non-orthogonal Slater determinants. We show that the fTDHF method can be implemented on a classical computer with a cost that scales polynomially with system size, and linearly with the time steps. We benchmark fTDHF against exact dynamics on three separate spin-1/2 models, representing adiabatic preparation of states with long-range correlations, disorder-driven observation of many-body localization, and particle production in the Schwinger model. For each of these systems, fTDHF is shown to reproduce the qualitative dynamics generated by the exact evolutions, while maintaining a simple physical picture due to its mean-field nature.

Dutta, Rishab↗

Synchronous dynamics of a coupled shaft/bearing/housing system with auxiliary support from a clearance bearing: Analysis and experiment

This study examines the response of a flexible rotor supported by load sharing between linear bearings and an auxiliary clearance bearing. The objective of the work is to develop a better understanding of the dynamical behavior of a magnetic bearing supported rotor system interacting with auxiliary bearings during a critical operating condition. Of particular interest is the effect of coupling between the bearing/housing and shaft vibration on the rotordynamical responses. A simulation model is developed and a number of studies are performed for various parametric configurations. An experimental investigation is also conducted to compare and verify the rotordynamic behavior predicted by the simulation studies. A strategy for reducing synchronous shaft vibration through appropriate design of coupled shaft/bearing/housing vibration modes is identified. The results are presented and discussed.

Lawen, James, Jr.↗

Control of systems with tiered actuators with application to interferometer optical delay line control

High accuracy feedback control systems might employ tiers of actuators with different properties. Such systems performance can be estimated in advance using Bode integrals. The systems can be made globally stable with good transient responses and close to the best possible disturbance rejection when controllers include high-order linear links and multiple nonlinear dynamic links. The design approach is exemplified by designing conb-ol system for an interferometer optical delay line.

delay line control↗