Search NASA⌕ Search

SEARCH · Search NASA

Results for “mass activity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Demonstration of active vibration control on a stirling-cycle cryocooler testbed

SatCon Technology Corporation has demonstrated excellent vibration reduction performance using active control on the JPL Stirling-cycle cryocooler testbed. The authors address the use of classical narrowband feedback control to meet the cryocooler vibration specifications using one cryocooler in a self-cancellation configuration. Similar vibration reduction performance was obtained using a cryocooler back-to-back configuration by actively controlling a reaction mass actuator that was used to mimic the second cooler.

Johnson, Bruce G.↗

A deep atmospheric eclipse of AL Velorum

I have obtained new International Ultraviolet Explorer (IUE) observations in 1992 to search for an accretion column in and to analyze an atmospheric eclipse of AL Vel, a low luminosity zeta Aurigae binary. Rich shell spectra recorded at three phases of atmospheric eclipse give column densities and excitation temperatures for the chromospheric gas. The chromospheric density falls off exponentially with a scale height of 3 solar radius, an order of magnitude greater than expected for support by thermal motions. Excitation temperatures at 2 - 5 scale heights into the chromosphere are approximately 7000 K, with Doppler widths near 17 km/s. Absorption features that could be formed in an accretion column were detected at phases 0.70 and 0.75 in a series of spectra spanning the range 0.63-0.80 in orbital phase. They imply a very slow acceleration of the wind, consistent with results for other zeta Aur binaries, but the wind speed implied is inconsistent with profiles of wind lines. The terminal velocity of this wind, greater than or approximately = 360 km/s, is higher than that in any of the other zeta Aur binaries. Wind and chromospheric features in 1992 were much more prominent than in 1988, which implies that both the wind and chromosphere were much more massive: we seem to have witnessed in 1992 a burst of activity with a mass-loss rate greater than 10(exp -8) solar mass/yr.

Eaton, Joel A.↗

X-Ray Flare Characteristics in the B2e Star Lambda Eridani (ROSAT)

We document the results of a simultaneous wavelength monitoring on the B2e star (lambda) Eri. This campaign was carried out from ground stations and with the ROSAT, ASCA, IUE, and Voyager 2 space platforms during a week in February-March 1995; a smaller follow-up was conducted in September 1995. During the first of these intervals (lambda) Eri exhibited extraordinary wind and disk-ejection activity. The ROSAT/HRI X-ray light curves showed no large flares such as the one the ROSAT/PSCA observed in 1991. However, possible low level fluctuations in the February-March ROSAT data occurred at the same time as unusual activity in H(alpha) He I (lambda)6678, He II (lambda)1640, and the C IV doublet. For example, the hydrogen and helium lines exhibited an emission in the blue half of their profiles, probably lasting several hours. The C IV lines showed a strong high-velocity Discrete Absorption Component (DAC) accompanied by unusually strong absorption at lower velocities. The helium line activity suggests that a mass ejection occurred at the base of the wind while the strong C III (Voyager) and C IV (IUE) lines implies that shock interactions occurred in the wind flow. It is not clear that the X-ray elevations are directly related to the strong C IV absorptions because the former changed on a much more rapid timescale than absorptions in the C IV lines. Within hours of the mild X-ray flux variations found by ROSAT on February 28, the Voyager UVS observed a "ringing" that decayed over three 3-hr. cycles. The amplitude of these fluctuations was strong (50%) at (lambda)(lambda)950-1100, decreased rapidly with wavelength, and faded to nondetection longward of (lambda)1300. Various considerations indicate that these continuum variations were not due to an instrumental pathology in the UVS. Rather, they appear to be due to a time-dependent flux deficit in the (lambda)(lambda)950-1250 region. We outline a scenario in which a dense plasma structure over the star's surface is heated and cooled quasi-periodically to produce such flux changes. Observations of new examples of this phenomenon are badly needed. Amateur astronomers can make a significant contribution to its understanding by searching for ringing in light curves of Be stars during their outburst phases. Finally we draw attention to an increase in the emission of the H(alpha) line that occurred at about the time the FUV ringing started. This increased emission hints that approximately 50,000K plasma near the star's surface can influence the circumstellar disc at approximately 12R. by its increased Lyman continuum flux.

Smith, Myron A.↗

The TRMM Precipitation Radar: Opportunities and Challenges

Although studies on the feasibility of spaceborne weather radar date back to the 1960's, it was only with the launch of the Tropical Rainfall Measuring Mission (TRMM) Satellite in November 1997 that the first weather radar was placed into low earth orbit. The long delay between the initial concept and implementation was caused not only by the demanding requirements of active sensors such as mass, power, and reliability, but because of scientific and technological challenges. For example, the demand for adequate spatial resolution arises from the need to resolve the horizontal structure of convective storm cells and to avoid surface contamination of the rain return at off-nadir angles. To achieve a horizontal resolution on the order of 4 km from low earth orbit with a modest antenna size of 2 m requires the use of a much higher frequency (Ku-band) than those typically used for ground-based weather radars (S- and C-band). Higher frequencies are subject to higher attenuation. As Hitschfeld and Bordan (1954) showed in their classic paper, attenuation correction with a single-wavelength radar is inherently unstable at high attenuations unless the drop size distribution and the radar constant are known precisely. Since these conditions are seldom met, much work over the last decade has been devoted to formulating and testing alternative methods of attenuation correction. The operational method used in the TRMM radar processing is discussed in section 3 of the paper.

Meneghini, R.↗

Multi-Megawatt Gas Turbine Power Systems for Lunar Colonies

A concept for development of second generation 10 MWe prototype lunar power plant utilizing a gas cooled fission reactor supplying heated helium working fluid to two parallel 5 MWe closed cycle gas turbines is presented. Such a power system is expected to supply the energy needs for an initial lunar colony with a crew of up to 50 persons engaged in mining and manufacturing activities. System performance and mass details were generated by an author developed code (BRMAPS). The proposed pilot power plant can be a model for future plants of the same capacity that could be tied to an evolutionary lunar power grid.

Juhasz, Albert J.↗

Self-Pressurization and Spray Cooling Simulations of the Multipurpose Hydrogen Test Bed (MHTB) Ground-Based Experiment

This paper presents a CFD (computational fluid dynamics) model for simulating the self-pressurization of a large scale liquid hydrogen storage tank. In this model, the kinetics-based Schrage equation is used to account for the evaporative and condensing interfacial mass flows. Laminar and turbulent approaches to modeling natural convection in the tank and heat and mass transfer at the interface are compared. The flow, temperature, and interfacial mass fluxes predicted by these two approaches during tank self-pressurization are compared against each other. The ullage pressure and vapor temperature evolutions are also compared against experimental data obtained from the MHTB (Multipuprpose Hydrogen Test Bed) self-pressurization experiment. A CFD model for cooling cryogenic storage tanks by spraying cold liquid in the ullage is also presented. The Euler- Lagrange approach is utilized for tracking the spray droplets and for modeling interaction between the droplets and the continuous phase (ullage). The spray model is coupled with the VOF (volume of fluid) model by performing particle tracking in the ullage, removing particles from the ullage when they reach the interface, and then adding their contributions to the liquid. Droplet ullage heat and mass transfer are modeled. The flow, temperature, and interfacial mass flux predicted by the model are presented. The ullage pressure is compared with experimental data obtained from the MHTB spray bar mixing experiment. The results of the models with only droplet/ullage heat transfer and with heat and mass transfer between the droplets and ullage are compared.

cryogenic fluid storage↗

CFD Modeling of the Multipurpose Hydrogen Test Bed (MHTB) Self-Pressurization and Spray Bar Mixing Experiments in Normal Gravity: Effect of the Accommodation Coefficient on the Tank Pressure

A CFD model for simulating the self-pressurization of a large scale liquid hydrogen storage tank is utilized in this paper to model the MHTB self-pressurization experiment. The kinetics-based Schrage equation is used to account for the evaporative and condensi ng interfacial mass flows in this model. The effect of the accommodation coefficient for calculating the interfacial mass transfer rate on the tank pressure during tank selfpressurization is studied. The values of the accommodation coefficient which were considered in this study vary from 1.0e-3 to 1.0e-1 for the explicit VOF model and from 1.0e-4 to 1.0e-3 for the implicit VOF model. The ullage pressure evolutions are compared against experimental data. A CFD model for controlling pressure in cryogenic storage tanks by spraying cold liquid into the ullage is also presented. The Euler-Lagrange approach is utilized for tracking the spray droplets and for modeling the interaction between the droplets and the continuous phase (ullage). The spray model is coupled with the VOF model by performing particle tracking in the ullage, removing particles from the ullage when they reach the interface, and then adding their contributions to the liquid. Droplet-ullage heat and mass transfer are modeled. The flow, temperature, and interfacial mass flux, as well as droplets trajectories, size distribution and temperatures predicted by the model are presented. The ul lage pressure and vapor temperature evolutions are compared with experimental data obtained from the MHTB spray bar mixing experiment. The effect of the accommodation coefficient for calculating the interfacial and droplet mass transfer rates on the tank pressure during mixing of the vapor using spray is studied. The values used for the accommodation coefficient at the interface vary from 1.0e-5 to 1.0e-2. The droplet accommodation coefficient values vary from 2.0e-6 to 1.0e-4.

cryogenic fluid storage↗

Modeling Ullage Dynamics of Tank Pressure Control Experiment during Jet Mixing in Microgravity

A CFD model for simulating the fluid dynamics of the jet induced mixing process is utilized in this paper to model the pressure control portion of the Tank Pressure Control Experiment (TPCE) in microgravity1. The Volume of Fluid (VOF) method is used for modeling the dynamics of the interface during mixing. The simulations were performed at a range of jet Weber numbers from non-penetrating to fully penetrating. Two different initial ullage positions were considered. The computational results for the jet-ullage interaction are compared with still images from the video of the experiment. A qualitative comparison shows that the CFD model was able to capture the main features of the interfacial dynamics, as well as the jet penetration of the ullage.

active control↗

Alternating Twist Along an Erupting Prominence

Triangulation measurements using observations from the two Solar Terrestrial Relations Observatory (STEREO) spacecraft, combined with observations from the Solar Dynamics Observatory (SDO), are used to characterize the behavior of a prominence involved in two successive coronal mass ejections 6-7 December 2010. The STEREO separation at the time was 171.6 degrees, which was functionally equivalent to a separation of 8.4 degrees, and thus very favorable for feature co-identification above the limb. The first eruption at approximately 14:16 UT (Universal Time) on 6 December of the middle branch of the prominence starts off a series of magnetic reconfigurations in the right branch, which itself erupts at approximately 2:06 UT the next day, about 12 hours after the first eruption. The cool prominence material seen at 304 angstroms drains back down to the surface, but a flux-rope-like magnetic structure is seen to erupt in both 195 angstroms by the STEREO/Extreme Ultraviolet Imager (EUVI), and in white light by the STEREO/COR1 (Coronagraph 1) inner coronagraph. In between the two eruptions, two different signs of helicity are seen in the measured twist of the right branch. This is interpreted to be caused by the overall prominence channel being composed of different segments with alternating helicity signs. The erupting parts on 6 and 7 December both show positive twist, but negative twist is seen in between these positive sections. Negative twist is consistent with the dextral chirality signs seen in the He II line at 304 angstroms prior to both eruptions. However, during the period between the eruptions, a region of positive twist grows and replaces the region of negative twist, and finally erupts. We interpret these observations in the light of models that predict that helicity cancellation can be an important factor in the triggering of flares and coronal mass ejections.

Prominences↗

The Heraklion Extragalactic Catalogue (HECATE): A Value-added Galaxy Catalogue for Multimessenger Astrophysics

We present the Heraklion Extragalactic Catalogue, or HECATE, an all-sky value-added galaxy catalogue, aiming to facilitate present and future multiwavelength and multi messenger studies in the local Universe. It contains 204 733 galaxies up to a red shift of 0.047 (D200 Mpc), and it is>50 per cent complete in terms of the B-band luminosity density at distances in the0–170 Mpc range. By incorporating and homogenizing data from astronomical data bases and multiwavelength surveys, the catalogue offers positions, sizes, distances, morphological classifications, star formation rates, stellar masses, metallicities, and nuclear activity classifications. This wealth of information can enable a wide range of applications, such as (i) demographic studies of extragalactic sources, (ii) initial characterization of transient events, and (iii) searches for electromagnetic counterparts of gravitational-wave events. The catalogue is publicly available to the community at a dedicated portal, which will also host future extensions in terms of the covered volume and data products.

K Kovlakas↗

STITCH: A Subgrid-Scale Model for Energy Buildup in the Solar Corona

The solar corona routinely exhibits explosive activity, in particular coronal mass ejections and their accompanying eruptive ares, that have global-scale consequences. These events and their smaller counterparts, coronal jets, originate in narrow, sinuous lament channels. The key processes that form and evolve the channels operate on still smaller spatial scales and much longer time scales, culminating in a vast separation of characteristic lengths and times that govern these explosive phenomena. In this article, we describe implementation and tests of an efficient subgrid-scale model for generating eruptive structures in magnetohydrodynamics (MHD) coronal simulations. STITCH {STatistical InjecTion of Condensed Helicity { is a physics-based, reduced representation of helicity condensation: a process wherein small-scale vortical surface convection forms ubiquitous current sheets, and pervasive reconnection across the sheets mediates an inverse cascade of magnetic helicity and free energy, thereby forming the lament channels. We have developed a formalism, STITCH, that abstracts these complex processes into a single term in Ohm's law and the induction equation that directly injects tangential magnetic flux into the low corona. We show that our approach is in very good agreement with a full helicity-condensation calculation that treats all of the dynamics explicitly, while enabling substantial reductions in temporal duration and spatial resolution. In addition, we illustrate the flexibility of STITCH at forming localized lament channels and at energizing complex surface flux distributions that have sinuous boundaries. STITCH is simple to implement and computationally ecient, making it a powerful technique for physics-based modeling of solar eruptive events.

J T Dahlin↗

Effect of the Heliospheric State on CME Evolution

The culmination of solar cycle 24 by the end of 2019 has created the opportunity to compare the differing properties of coronal mass ejections (CMEs) between two whole solar cycles: solar cycle 23 (SC 23) and solar cycle 24 (SC 24). We report on the width evolution of limb CMEs in SCs 23 and 24 in order to test the suggestion by Gopalswamy et al. that CME flux ropes attain pressure balance at larger heliocentric distances in SC 24. We measure CME width as a function of heliocentric distance for a significantly large number of limb CMEs (∼1000) and determine the distances where the CMEs reach constant width in each cycle. We introduced a new parameter, the transition height (hc) of a CME, defined as the critical heliocentric distance beyond which the CME width stabilizes to a quasi-constant value. Cycle and phase-to-phase comparisons are based on this new parameter. We find that the average value of hc in SC 24 is 62% higher than that in SC 23. SC 24 CMEs attain their peak width at larger distances from the Sun than SC 23 CMEs do. The enhanced transition height in SC 24 is new observational ratification of the anomalous expansion. The anomalous expansion of SC 24 CMEs, which is caused by the weak state of the heliosphere, accounts for the larger heliocentric distance where the pressure balance between CME flux rope and the ambient medium is attained.

Solar coronal mass ejections↗

Application of Semi Active Control Techniques to the Damping Suppression Problem of Solar Sail Booms

Solar sails provide a propellant free form for space propulsion. These are large flat surfaces that generate thrust when they are impacted by light. When attached to a space vehicle, the thrust generated can propel the space vehicle to great distances at significant speeds. For optimal performance the sail must be kept from excessive vibration. Active control techniques can provide the best performance. However, they require an external power-source that may create significant parasitic mass to the solar sail. However, solar sails require low mass for optimal performance. Secondly, active control techniques typically require a good system model to ensure stability and performance. However, the accuracy of solar sail models validated on earth for a space environment is questionable. An alternative approach is passive vibration techniques. These do not require an external power supply, and do not destabilize the system. A third alternative is referred to as semi-active control. This approach tries to get the best of both active and passive control, while avoiding their pitfalls. In semi-active control, an active control law is designed for the system, and passive control techniques are used to implement it. As a result, no external power supply is needed so the system is not destabilize-able. Though it typically underperforms active control techniques, it has been shown to out-perform passive control approaches and can be unobtrusively installed on a solar sail boom. Motivated by this, the objective of this research is to study the suitability of a Piezoelectric (PZT) patch actuator/sensor based semi-active control system for the vibration suppression problem of solar sail booms. Accordingly, we develop a suitable mathematical and computer model for such studies and demonstrate the capabilities of the proposed approach with computer simulations.

Adetona, O.↗

Astrophysical Insights into Radial Velocity Jitter from an Analysis of 600 Planet-search Stars

Radial velocity (RV) detection of planets is hampered by astrophysical processes on the surfaces of stars that induce a stochastic signal, or “jitter,” which can drown out or even mimic planetary signals. Here, we empirically and carefully measure the RV jitter of more than 600 stars from the California Planet Search sample on a star by star basis. As part of this process, we explore the activity–RV correlation of stellar cycles and include appendices listing every ostensibly companion-induced signal we removed and every activity cycle we noted. We then use precise stellar properties from Brewer et al. to separate the sample into bins of stellar mass and examine trends with activity and with evolutionary state. We find that RV jitter tracks stellar evolution and that in general, stars evolve through different stages of RV jitter: the jitter in younger stars is driven by magnetic activity, while the jitter in older stars is convectively driven and dominated by granulation and oscillations. We identify the “jitter minimum”—where activity-driven and convectively driven jitter have similar amplitudes—for stars between 0.7 and 1.7 M {sub ⊙} and find that more-massive stars reach this jitter minimum later in their lifetime, in the subgiant or even giant phases. Finally, we comment on how these results can inform future RV efforts, from prioritization of follow-up targets from transit surveys like TESS to target selection of future RV surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

A Prospective Method for Predicting Coronal Mass Ejections From Vector Magnetograms

Two quantitative measures of the global nonpotentiality of predominantly bipolar active regions are explored for their usefulness as indicators of whether an active region is likely to produce coronal mass ejections (CMEs). The two measures, length of strong-field strong-shear main neutral line (Lss) and global net current (IN), are obtained directly from vector magnetograms of the regions. From measurements of Lss and IN in four active regions for which the global nonpotentiality and CME productivity are assessed independently of Lss and IN, it appears that Lss and IN are each a useful indicator of an active region's likely CME productivity. The results also suggest that Lss and IN may be more reliable predictors of the CME productivity of active regions than is the presence or absence of sigmoidal structure in coronal X-ray images of the regions and that there might be threshold values of Lss and IN above which CME production is likely and below which CME production is unlikely. While these results need to be certified by an expansion of this pilot study to more active regions, they show the promise of Lss and IN as quantitative measures of global nonpotentiality for CME prediction.

Falconer, D. A.↗

Mapping Hsp104 interactions using cross‐linking mass spectrometry

Molecular machines from the AAA+ (ATPases Associated with diverse cellular Activity) superfamily of protein disaggregases play important roles in protein folding, disaggregation and DNA processing. Recent cryo-EM structures of AAA+ molecular machines have uncovered nuanced changes in their conformation that underlie their specialized functions. Structural knowledge of these molecular machines in complex with substrates begins to explain their mechanism of activity. Here, we explore how cross-linking mass spectrometry (XL-MS) can be used to interpret changes in conformation induced by ATP in Hsp104 and how a substrate may interact with Hsp104. We applied a panel of cross-linking reagents to produce cross-linking maps of Hsp104 and interpret our data on previously determined X-ray and cryo-EM structures of Hsp104 from a thermophilic yeast, Calcarisporiella thermophila. We developed an analysis pipeline to differentiate between intra-subunit and inter-subunit contacts within the hexameric homo-oligomer. We identify cross-links that break the asymmetry that is present in Hsp104 in an ATP-hydrolysis competent conformation but is absent in an ATP-hydrolysis-defective mutant. Finally, we identify contacts between Hsp104 and a selected protein (proprotein convertase subtilisin/kexin type 9 PCSK9) to reveal contacts on the central channel of Hsp104 across the length of this protein indicating that we might have trapped interactions consistent with its translocation. Our simple and robust XL-MS-based experiments and methods help interpret how these molecular machines change conformation and bind to other proteins even in the context of homo-oligomeric assemblies enabling coupling state-of-the-art modeling approaches with XL-MS.

60 APPLIED LIFE SCIENCES↗