Search NASA⌕ Search

SEARCH · Search NASA

Results for “mass diffusivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Contactless Growth of ZnSe Single Crystals by Physical Vapor Transport

ZnSe crystals were grown by self-seeded physical vapor transport (PVT) technique in the horizontal configuration. The source materials were heat treated by H2 reduction to remove the oxide followed by baking under dynamic vacuum to adjust the source composition toward that of congruent sublimation. Contactless growth of ZnSe single crystals have been performed consistently using three different source materials. The crystals grew away from the wall during the later stage of the growth with large (110) facets tend to align parallel to the gravity direction. The Scanning Electron Micrography (SEM) micrographs and the Atomic Force Microscope (AFM) images showed that large (110) terraces and steps dominate the as-grown facets. The measured residual gas pressures in the processed ampoules agree well among various source materials and the major components were CO and H2. No preferred growth direction was found. The one-dimensional diffusion model on the mass flux of a multi-species PVT system was employed to analyze the conditions for contactless growth. The calculated thermal profile for supersaturation is very close to the thermal profile measured inside the empty furnace bore in the region of contactless growth. The effects of convective flows in the vapor phase inside the ampoule on the growth processes are discussed.

Su, Ching-Hua↗

Reduction of Acceleration to Effectively Microgravity Levels

Pressure gradients, i.e. pressure head, and buoyancy driven convection can be greatly decreased in experimental systems by acceleration of the laboratory reference frame at a rate consistent with the acceleration due to gravity. This may be done in a number of ways, the best known of which is the use of orbiting spacecraft. Other techniques include the use of aircraft following an appropriate parabolic trajectory or drop towers. The result is an experimental condition in which fluids experience virtually no outside forces relative to the laboratory reference frame. Such conditions are appropriate for the study of processes with diffusion dominated heat and/or mass Under, the study of phase transitions in the absence of pressure gradients, the study of solutal or thermal capillary convection, or containerless processes. Ways of achieving these conditions and complexities that arise in performing experiments in this environment are discussed.

Downey, James Patton↗

Computational Analysis of the Large Scale Low-Boom Supersonic Inlet

This presentation describes two computational fluid dynamic (CFD) analyses done in support of a supersonic inlet test performed at NASA Glenn Research Center in the fall of 2010. The large-scale-low-boom supersonic inlet was designed for a small supersonic aircraft that would cruise at a Mach number of 1.6. It uses an axisymmetric, external compression spike to reduce the Mach number to 0.65 at the fan face. The inlet was tested in the 8x6 supersonic wind tunnel at NASA GRC using conventional pressure probes, pressure sensitive paint, and high-speed schlieren. Two CFD analyses of the inlet were performed before the test, and compared to the experimental data afterwards. Both analyses used the WIND-US code. First, an axisymmetric analysis of the inlet, diffuser, cold pipe, and mass flow plug was performed to predict the performance of the entire system in the wind tunnel. Then a 3-D analysis of the inlet with all its interior struts was performed to predict details of the flow field and effects of angle of attack. Test results showed that the inlet had excellent performance, with a peak total pressure recovery of 96 percent, and a buzz point far outside the engine operating range. The computations agreed very well with the data, with predicted recoveries within 0.3 - 0.5 points of the measurements.

Chima, ROdrick V.↗

Axisymmetric Calculations of a Low-Boom Inlet in a Supersonic Wind Tunnel

This paper describes axisymmetric CFD predictions made of a supersonic low-boom inlet with a facility diffuser, cold pipe, and mass flow plug within wind tunnel walls, and compares the CFD calculations with the experimental data. The inlet was designed for use on a small supersonic aircraft that would cruise at Mach 1.6, with a Mach number over the wing of 1.7. The inlet was tested in the 8-ft by 6-ft Supersonic Wind Tunnel at NASA Glenn Research Center in the fall of 2010 to demonstrate the performance and stability of a practical flight design that included a novel bypass duct. The inlet design is discussed here briefly. Prior to the test, CFD calculations were made to predict the performance of the inlet and its associated wind tunnel hardware, and to estimate flow areas needed to throttle the inlet. The calculations were done with the Wind-US CFD code and are described in detail. After the test, comparisons were made between computed and measured shock patterns, total pressure recoveries, and centerline pressures. The results showed that the dual-stream inlet had excellent performance, with capture ratios near one, a peak core total pressure recovery of 96 percent, and a large stable operating range. Predicted core recovery agreed well with the experiment but predicted bypass recovery and maximum capture ratio were high. Calculations of offdesign performance of the inlet along a flight profile agreed well with measurements and previous calculations.

Chima, Rodrick V.↗

Flowfield Analysis of a Small Entry Probe (SPRITE) Tested in an Arc Jet

A novel concept of small size (diameter less than 15 inches) entry probes named SPRITE (Small Probe Re-entry Investigation for TPS Engineering) has been developed at NASA Ames Research Center (ARC). These flight probes have on-board data acquisition systems that have also been developed in parallel at NASA ARC by Greg Swanson1. Flight probes of this size facilitate testing over a wide range of conditions in arc jets available at NASA ARC, thereby fulfilling a 'test what you fly' paradigm. As indicated by the acronym, these probes, with suitably tailored trajectories, are primarily meant to be robotic flight test beds for TPS materials, although the design is flexible enough to accommodate additional objectives of flight-testing other vehicle subsystems. A first step towards establishing the feasibility of the SPRITE concept is to arc-jet test fully instrumented models at flight scale. In a follow-on to the Large-Scale Article Tests (LSAT2) performed in the 60 MW Interaction Heating Facility (IHF) in late 2008/early 2009, a full-scale model of Deep Space-2 (DS23) made of red oak was tested in the 20 MW Aerodynamic Heating Facility (AHF). There were no issues with mass capture by the diffuser for blunt bodies of roughly 15 inches diameter tested in the 18-inch nozzle of the AHF. Building on this initial success, two identical test articles - SPRITE-T1-1 and SPRITE-T1-2 (T1 indicating the choice of back shell geometry) - were fabricated, and one of them, SPRITE-T1-1, was tested in the AHF recently. Both these test articles, 14 inches in diameter, have a 45deg sphere-cone (like DS2) made of PICA bonded on to a 1/8th inch thick aluminum shell using RTV. The aft portion of the test article is a conical frustum (15deg cone angle) with LI-2200 bonded on to the aluminum shell. Each model is fully instrumented with: (a) thermocouples imbedded in plugs in the heat shield, (b) thermocouples bonded to the aluminum substructure; the thermocouples are distributed over the entire shell, and (c) a few strain gages. Data from some of the thermocouples and gages are acquired by the on-board data acquisition system (DAS), while data from the others are routed to the facility-provided DAS, thereby enabling a cross check on the in situ measurement capability. as inputs to v2.6.1 of the in-house materials thermal response code, FIAT

atmospheric entry↗

Vapor Growth of ZnSe-based Compound Semiconductors in Low Gravity environment on International Space Station

Six low-gravity experiments of crystal growth of ZnSe-based compound semiconductors by physical vapor transport (PVT) are scheduled to be processed inside Low Gradient Furnace (LGF) on Materials Science Research Rack (MSRR) in Material Science Laboratory (MSL) on International Space Station (ISS) starting from February 27th, 2023. The flight samples consist of three unseeded growths of ZnSe, Cr-doped ZnSe and ZnSeTe as well as growth of ZnSe on top of three single crystal ZnSe seeds with orientation of (100), (110) and (111). The main scientific objective of the flight experiments is to establish the effects of gravity-driven fluid flows on Earth to (i) the non-uniform incorporation of impurities and defects and (ii) the deviation from stoichiometry observed in the grown crystals caused by growth interface fluctuations and evolution as the results of buoyancy-driven convection and irregular fluid-flows. The investigation will also evaluate the effects of gravity on the PVT process by examining (i) the growth kinetics on various seed orientations, (ii) the dopant segregation and distribution in the Cr doped ZnSe, and (iii) the compositional segregation and distribution in the ternary ZnSeTe crystal grown by PVT. Additionally, from X-ray diffraction/topography and by measuring the density and distribution of various crystalline defects it will assess the self-induced strain effects developed during processing at elevated temperatures caused by the weight of the crystals. During the ground-based preparations, the following tasks have been accomplished: • Establish the thermodynamic properties of the ZnSe binary and related ternary systems by measuring the partial pressures of the vapor phase coexisting with the condensed phases and perform phase diagram calculations for comparison. • Evaluate the effects of gravity-driven convection in the growth process by performing experiments under various vapor transport orientations relative to gravity vector, i.e., horizontal, vertically stabilized and destabilized configurations. • Establish a quantitative correlation between growth parameters and the characteristics and properties of the grown crystals by characterizing the crystals using a variety of techniques. • Evaluate the fundamentals of the current theories on vapor transport and crystal growth kinetics by performing in-situ and real-time monitoring techniques during growth. • Develop a one-dimensional diffusion limited theory of mass transport and two- and three-dimensional numerical simulations of both mass transport and heat transfer and thus establish the microgravity requirements for the flight experiments and to predict the characteristics of the grown crystals such as the solid-vapor interface shapes… etc. and establish a fundamental understanding of the crystal growth process from the comparison with experimental results.

ZnSe↗

Modelling the Greenland Ice Sheet's Committed Contribution to Sea Level During the 21st Century

Mass loss from the Greenland Ice Sheet can be partitioned between surface mass balance and discharge due to ice dynamics through its marine-terminating outlet glaciers. A perturbation to a glacier terminus (e.g., a calving event) results in both an instantaneous response in velocity and mass loss and a diffusive response due to the evolution of ice thickness over time. This diffusive response means the total impact of a retreat event can take decades to be fully realized. Here we model the committed response of the Greenland Ice Sheet by applying perturbations to the marine-terminating glacier termini that represent recent observed changes, and simulating the response over the 21st century, while holding the climate forcing constant. The sensitivity of the ice sheet response to model parameter uncertainty is explored within an ensemble framework, and Gravity Recovery and Climate Experiment data is used to constrain the results using a Bayesian calibration approach. We find that the Greenland Ice Sheet's committed contribution to 21st century sea level rise is at least 33.5 [17.5 52.4] mm (25th and 75th percentiles in brackets), with at least 6 mm being attributable directly to terminus retreat that occurred between 2007 and 2015. The spread in our projections is driven by uncertainty in the basal friction coefficient. Our results complement the ISMIP6 Greenland projections, which report the ice sheet response to future forcing, excluding the background response. In this way, we can obtain estimates of Greenland's total contribution to sea level rise in 2100.

Isabel J. Nias↗

Carbon transport in diamond anvil cells

High-pressure-induced carbon transport from diamond anvils into the pressure chamber of diamond anvil cells (DACs) was studied by micro-Raman spectroscopy. Depending on experimental conditions (temperature and pressure), various carbon phases (amorphous carbon, diamond, microcrystalline or nanocrystalline graphite) were detected in the originally carbon-free samples. Temperature-induced growth of a graphite phase at the sample/diamond interface was observed in situ at high pressure in an externally heated DAC. In laser-heated samples inside the pressure-transmitting medium, at pressures above 6 GPa there was transport of carbon from the diamond culet surface into the heated part of the sample. These observations suggest that account should be taken of possible carbon diffusion in high-pressure research with DACs, such as high-pressure melting, element partitioning, phase transformations, chemical reactions, and electrical resistivity.

47 OTHER INSTRUMENTATION↗

A Computational Model of Cell Migration in Response to Biochemical Diffusion

The Computational Sciences and Engineering Division of the Oak Ridge National Laboratory is partnering with the University of Tennessee Graduate School of Medicine to design a computational model describing various factors related to the development of intimal hyperplasia (IH) in response to arterial injury. This research focuses on modeling the chemotactic and haptotactic processes that stimulate vascular smooth muscle cell migration into the intima. A hybrid discrete-continuous mathematical model of cell migration in response to biochemical diffusion was developed in C++. Chemoattractant diffusion is modeled as a continuous partial differential equation, whereas migration of the cells is modeled as a series of discrete events. Results obtained from the discrete state model for cell migration agree with those obtained from Boyden chamber experiments.

59 BASIC BIOLOGICAL SCIENCES↗

MOSCATO Development and Integration in Fiscal Year 2025: Implementation of Multiphase, Multiphysics Modeling Capabilities for Molten Salt Systems

MOSCATO (Molten Salt Chemistry and Transport) is a multiphysics code that provides high-fidelity, coupled simulations of fluid flow, heat transfer, mass transfer, chemistry, electrochemical phenomena, and alloy corrosion for molten salt systems. In FY25, significant developments were made to the code package, enhancing its capabilities for modeling all relevant phenomena within operating moltens salt reactors (MSRs). The developments and activities in FY25 included: 1. Implementation of Level-Set methods to enable modeling of single-bubble behavior in molten salts. In FY25, the Level-Set two-phase flow modeling implementation was improved to simulate single bubble behavior with molten salt media. The large density and viscosity ratios between typical gases and molten salt liquids present challenges for these types of numerical solvers. With enhancements to the pressure projection method, MOSCATO’s Level-Set solver was able to be successfully validated to experiments related to helium bubble rise in stagnant molten salt. The simulated bubble rising velocity showed reasonable good agreement with experimental measurements. The bubble shape and dynamics were also visually compared with experimental snapshots, demonstrating a good qualitative match. 2. Generation of mass transfer correlations for multiphase flow systems. To enable calculations of the tritium transport across the interface between gas bubbles and salt, we modeled high- Schmidt-number mass transfer around a sphere across a broad range of Reynolds numbers. The mesh near the sphere surface was highly refined to resolve steep concentration gradients caused by the low diffusion coefficient. Literature-based mass transfer correlations were compared with the numerical results, and modifications were proposed to improve agreement, particularly at higher Schmidt numbers. These mass transfer correlations were subsequently provided to other national laboratories to help enable high quality mass transfer simulations using lower-order solvers under development within the NEAMS program. 3. Preliminary implementation of a bubbly flow solver. To model bubbly flow in molten salt, we implemented a bubbly flow solver for void fractions less than 5%. To do so, an algebraic relative velocity model that assumes small bubbles with rapid momentum equilibration was added to MOSCATO to compute bubble velocities. Preliminary comparisons with experimental data showed reasonable agreement, and further improvements are underway. 4. Generation of mass transfer correlations for MSRE subchannel The Molten-Salt Reactor Experiment (MSRE) was a landmark historical project that demonstrated the feasibility of molten-salt reactor technology. The MSRE campaign also generated a significant body of experimental data and reports that continue to support molten-salt–related research. In this report, the MSRE core subchannel was used as the reference geometry for a mass transfer study performed with MOSCATO. The geometry and computational mesh were adapted from a previous study, providing adequate resolution for the relatively low Reynolds number in this case. Additional mesh refinement was applied to reach higher Schmidt numbers, enabling the derivation of a reliable mass-transfer correlation for the present scenario. 5. Simulations of oxygen ingressions into molten salt. In the previous fiscal year, we initiated a study to simulate oxygen ingression in stagnant salt. As oxygen enters the salt through its surface, it reacts with Ce 3+ to form solid CeO 2 and other reaction products. To more fully capture the complex diffusion-convection-reaction mechanisms, capabilities for modeling natural convection in the salt vessel were added. These were needed as the flow of the ingressed gas induced flow in the salt caused by surface shear and non-isothermal effects. With these updated physics in place, we were able to successfully reproduce the experimental results for the rate of change of CeCl 3 concentrations versus time. 6. Flow corrosion model validation. In FY24, MOSCATO’s corrosion model was validated against static corrosion experiments. In FY25, this work was extended to a flow corrosion experiment, where FLiNaK salt was driven by natural convection, with initial salt impurities to initiate corrosion. Despite uncertainties in parameters such as elemental diffusion coefficients in the alloy and unknown H + concentrations, the simulations achieved good agreement with experimental results, especially in predicting sample mass losses.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Multiscale Modeling of CO 2 Migration and Trapping in Fractured Reservoirs with Validation by Model Comparison and Real-Site Applications (Final Technical Report)

This report documents the accomplishments achieved during the project titled “Multiscale Modeling of CO 2 Migration and Trapping in Fractured Reservoirs with Validation by Model Comparison and Real-Site Applications” funded by the US Department of Energy, Office of Fossil Energy. The objectives of the project were to develop modeling capabilities for predicting CO 2 and brine migration in fractured reservoirs during geologic carbon storage and to investigate the feasibility of carbon storage in fractured reservoirs using the newly developed modeling capabilities. To achieve these objectives new mass transfer functions were developed to adapt existing dual-continuum approaches – a commonly used approach in hydrocarbon reservoir modeling – to the CO 2 -brine system. In the dual-continuum approach the undisturbed rock matrix and the fractures are modeled as two separate continua, which are coupled through mass exchange of CO 2 and brine between the two continua. Mass transfer functions represent the mass exchange between fractures and the rock matrix, without requiring highly resolved numerical grids of individual fractures, thus allowing large modeling domains relevant to geologic carbon storage questions (tens of meters to hundreds of kilometers). Mass transfer functions for the exchange of both free-phase CO 2 and brine between fractures and rock matrix were developed for both the injection phase and the post-injection phase. During the injection phase the fractures are filled with CO 2 , while the rock matrix is initially filled with brine. Therefore, a mass transfer function was developed that is based on vertical displacement of brine by CO 2 in the rock matrix due to gravitational forces. Once CO 2 injection ceases and CO 2 migrates away from the direct vicinity of the injection site, the fractures will begin to re-fill with brine, while the rock matrix will have high CO 2 saturations. For these conditions a mass transfer functions was developed that is based on spontaneous imbibition, as the pore spaces in the rock matrix are much smaller than in the fractures. For formations with low permeability or high capillary entry pressure of the rock matrix, free-phase CO 2 may not be able to enter the rock matrix. However, free-phase CO 2 at the interface between fractures and rock matrix can dissolve into brine resident in the rock matrix. Therefore, additional mass transfer functions were developed based on aqueous-phase diffusion of CO 2 through the rock matrix. These mass transfer functions are based on existing solutions for diffusion and were expanded to be applicable to a variety of block shapes relevant to dual-continuum modeling. Implementations of the newly developed mass transfer functions showed that they give accurate results when compared to highly resolved models. In addition to developing new transfer functions, a new vertically-integrated dual-continuum modeling framework was developed. This development takes advantage of fast vertical segregation of CO 2 and brine in the fractures due to the density difference between CO 2 and brine and the high permeability of the fractures. Therefore, a vertically-integrated vertical equilibrium model for the fractures is coupled with a vertically-distributed model for the rock matrix. The newly developed approach significantly reduces the computational effort, but is only accurate for fracture permeabilities of 100 mD or higher. Finally, the newly developed models were applied to real and hypothetical geologic carbon storage sites to investigate the feasibility of using fractured reservoirs for carbon storage. The general results were, that storage of CO 2 – both as free-phase and dissolved – is feasible, but that storage capacities are likely lower than in unfractured systems. While the high permeability of the fractures reduces the injection pressure (or permits higher injection rates), fast migration of CO 2 may limit the overall storage volume, because CO 2 may escape laterally with not enough of the rock matrix being swept for effective storage.

20 FOSSIL-FUELED POWER PLANTS↗

Initial stages of the growth of barium strontium titanate films on a semi-isolating silicon carbide substrate

The initial stages of the growth of ferroelectric barium strontium titanate films on single-crystal silicon carbide substrates have been studied for the first time. The choice of a substrate with high thermal conductivity has been due to the possibility of applying these structures in powerful microwave devices. The temperature ranges separating the mechanism of the surface diffusion of deposited atoms from the diffusion via a gaseous phase during the growth of multicomponent films have been determined. The studies show that the mass transfer by means of surface diffusion leads to the formation of small-height nuclei that cover a large area of the substrate, whereas the mass transfer via a gaseous phase leads to the formation of a “columnar” islandtype structure with small percentage of covering the substrate and larger island heights.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Realistic multisite lattice-gas modeling and KMC simulation of catalytic surface reactions: Kinetics and multiscale spatial behavior for CO-oxidation on metal (100) surfaces

A realistic molecular-level description of catalytic reactions on single-crystal metal surfaces can be provided by stochastic multisite lattice-gas (msLG) models. This approach has general applicability, although in this report, we will focus on the example of CO-oxidation on the unreconstructed fcc metal (100) or M(100) surfaces of common catalyst metals M = Pd, Rh, Pt and Ir (i.e., avoiding regimes where Pt and Ir reconstruct). These models can capture the thermodynamics and kinetics of adsorbed layers for the individual reactants species, such as CO/M(100) and O/M(100), as well as the interaction and reaction between different reactant species in mixed adlayers, such as (CO + O)/M(100). The msLG models allow population of any of hollow, bridge, and top sites. This enables a more flexible and realistic description of adsorption and adlayer ordering, as well as of reaction configurations and configuration-dependent barriers. Adspecies adsorption and interaction energies, as well as barriers for various processes, constitute key model input. The choice of these energies is guided by experimental observations, as well as by extensive Density Functional Theory analysis. Model behavior is assessed via Kinetic Monte Carlo (KMC) simulation. We also address the simulation challenges and theoretical ramifications associated with very rapid diffusion and local equilibration of reactant adspecies such as CO. These msLG models are applied to describe adsorption, ordering, and temperature programmed desorption (TPD) for individual CO/M(100) and O/M(100) reactant adlayers. In addition, they are also applied to predict mixed (CO + O)/M(100) adlayer structure on the nanoscale, the complete bifurcation diagram for reactive steady-states under continuous flow conditions, temperature programmed reaction (TPR) spectra, and titration reactions for the CO-oxidation reaction. Extensive and reasonably successful comparison of model predictions is made with experimental data. Furthermore, we discuss the possible transition from traditional mean-field-type bistability and reaction kinetics for lower-pressure to multistability and enhanced fluctuation effects for moderate- or higher-pressure. Behavior in the latter regime reflects a stronger influence of adspecies interactions and also lower diffusivity in the higher-coverage mixed adlayer. We also analyze mesoscale spatiotemporal behavior including the propagation of reaction diffusion fronts between bistable reactive and inactive states, and associated nucleation-mediated transitions between these states. This behavior is controlled by complex surface mass transport processes, specifically chemical diffusion in mixed reactant adlayers for which we provide a precise theoretical formulation. The msLG models together with an appropriate treatment of chemical diffusivity enable equation-free heterogeneous coupled lattice-gas (HCLG) simulations of spatiotemporal behavior. In addition, msLG + HCLG modeling can describe coverage variations across polycrystalline catalysts surfaces, pressure variations across catalyst surfaces in microreactors, and could be incorporated into a multiphysics framework to describe mass and heat transfer limitations for high-pressure catalysis. (C) 2013 Elsevier Ltd. All rights reserved.

36 MATERIALS SCIENCE↗

Chemical stratification in white dwarf atmospheres and envelopes

Theoretical arguments supporting a new mechanism maintaining a homogeneously mixed composition in white dwarf atmospheres with traces of helium are presented. Diffusion time scales, meridional circulation, mass loss, accretion of interstellar matter, convection, and radiative levitation are discussed. Theoretically, layered envelopes, with hydrogen on top of helium and an abundance profile in the transition layer determined by diffusion equilibrium, are expected. In cases with observed helium and hydrogen in the atmosphere this means that the total hydrogen mass must be very small. The empirical evidence for such atmospheres are assessed, using a new grid of model atmospheres with stratified element abundances and applying it to typical mixed abundance cases at the hot end of the white dwarf temperature sequence.

Koester, D.↗

Sorption Behavior of Cationic Radionuclides on Biotite Flakes at pH 5 - 17326

Biotite contained in crystalline rock (granite) is a notable mineral because of its high sorption effects for cationic radionuclides. To date, studies on the sorption effects of rocks have focused on the powder form of minerals. However, the form of a mineral will seriously affect its sorption of radionuclides. This study examined the sorption of Cs, Sr, and Eu by biotite in the flake form. Biotite flakes (5 mm x 6 mm) were prepared for the sorption experiments. The initial concentrations of the tracer ions were set to 1 mM for Sr and Eu and 2 mM for Cs. The sorption experiments for Cs, Sr, and Eu were conducted by mixing 0.6 g of biotite flakes and 6 mL of trace solution at pH 5 for 7 days. As a result, the sorption of tracer ions gradually increased with continuous diffusion into the biotite flakes. The diffusion of the tracer ions into the layer structure of biotite was also observed by secondary ion-microprobe mass spectrometry (SIMS) analysis. The apparent diffusion coefficient of Eu into the biotite flakes was estimated to be 3.0 x 10-12 m{sup 2}/s by applying the experimental data to a theoretical model. This estimated diffusion coefficient is smaller than that for matrix diffusion in granite. Therefore, these diffusion and sorption behaviors may be important factors to consider to more reliably estimate the migration rates of radionuclides in host rock. (authors)

58 GEOSCIENCES↗

Multiple main sequence of globular clusters as a result of inhomogeneous big bang nucleosynthesis

A new mechanism for enhancing the helium abundance in the blue main sequence stars of {omega} Centauri and NGC 2808 is investigated. We suggest that helium enhancement was caused by the inhomogeneous big bang nucleosynthesis. Regions with extremely high baryon-to-photon ratios are assumed to be caused by the baryogenesis. Its mass scale is also assumed to be 10{sup 6}M{sub {center_dot}.} An example of the mechanisms to realize these two things was already proposed as the Affleck-Dine baryogenesis. As the baryon-to-photon ratio becomes larger, the primordial helium abundance is enhanced. We calculated the big bang nucleosynthesis and found that there exists a parameter region yielding enough helium to account for the split of the main sequence in the aforementioned globular clusters while keeping the abundance of other elements compatible with observations. Our mechanism predicts that heavy elements with the mass number of around 100 is enhanced in the blue main sequence stars. We estimate the time scales of diffusion of the enhanced helium and mass accretion in several stages after the nucleosynthesis to investigate whether these processes diminish the enhancement of helium. We found that the diffusion does not influence the helium content. A cloud with a sufficiently large baryon-to-photon ratio to account for the multiple main sequence collapsed immediately after the recombination. Subsequently, the cloud accreted the ambient matter with the normal helium content. If the star formation occurred both in the collapsed core and the accreted envelope, then the resultant star cluster has a double main sequence.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Model of Inclusion Evolution During Calcium Treatment in the Ladle Furnace

Calcium treatment of steel is typically employed to modify alumina inclusions to liquid calcium aluminates. However, injected calcium also reacts with the dissolved sulfur to form calcium sulfide. The current work aims to develop a kinetic model for the evolution of oxide and sulfide inclusions in Al-killed alloyed steel during Ca treatment in the ladle refining process. The model considers dissolution of the calcium from the calcium bubbles into the steel and reduction of calcium oxide in the slag to dissolved calcium. A steel–inclusion kinetic model is used for mass transfer to the inclusion interface and diffusion within the calcium aluminate phases formed on the inclusion. The inclusion–steel kinetic model is then coupled with a previously developed steel–slag kinetic model. The coupled inclusion–steel–slag kinetic model is applied to the chemical composition changes in molten steel, slag, and evolution of inclusions in the ladle. The result of calculations is found to agree well with an industrial heat for species in the steel as well as inclusions during Ca treatment.

36 MATERIALS SCIENCE↗