Search NASA⌕ Search

SEARCH · Search NASA

Results for “membrane selectivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

A distinct subpopulation of membrane vesicles in Pseudomonas putida is enriched in enzymes for lignin catabolism

Bacterial membrane vesicles (MVs) mediate diverse microbial processes and are emerging as powerful biomedical tools, but MV population heterogeneity remains an open question. Here, we separate, enumerate, and characterize two MV populations from the soil bacterium Pseudomonas putida during growth with or without lignin-derived carbon, a major carbon source from plant cells in the rhizosphere. Small MVs (MV-S, diameter ~100 nm) were produced from all cultures, whereas large MVs (MV-L, diameter ~300 nm) were observed during the late stationary phase of lignin cultivations. MV-S contained selectively packaged proteins with diverse physiological functions, whereas the MV-L proteome was smaller and largely enriched in outer membrane proteins. Interestingly, enzymes known to mediate the catabolism of lignin-derived aromatic compounds were enriched in MV-S. Overall, this study highlights the need for careful consideration of MV populations in microbial systems.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Influence of Ink Formulation and Drying Conditions on Ionomer Distribution in High-Performance Roll-to-Roll-Coated Gas-Diffusion Electrodes

To enable mass production of fuel cell membrane electrode assemblies (MEAs) catalyst layers production will require continuous roll-to-roll (R2R) coating processes. Gas diffusion electrodes (GDEs) are advantageous for mass production because the catalyst layer can be directely coated on the microporous layer of the gas diffusion media without the need for a decal-transfer process. It is known that the water-to-alcohol ratio in the catalyst ink influences the interactions of the ionomer with the catalyst leading to different distributions of ionomer in spray-coated catalyst layers. It is also known that during drying of colloidal mixtures, like fuel cell inks, factors such as drying rate, particle size, and agglomeration influence how the materials distribute themselves throughout the thickness of the dired film. Thus far there have only been limited studies to understand how process conditions such as ink formulation and drying temperature influence the distribution of ionomer and catalyst coated using scalable methods. This understanding is especially important for GDEs since it is known that having a sufficient amount of ionomer at the catalyst layer-membrane interface is critical for high performance. In this study we have focused on determining how the ratio of water to 1-propanol in the catalyst ink ink and drying temperature influence the distribution of ionomer throughout the thickness of the catalyst layer. Using a combination of Kelvin probe and x-ray photoelectron spectroscopy we show that an ionomer-rich surface is promoted by a higher drying rate and a water-rich catalyst ink. In contrast, a 1-propanol catalyst ink leads to a lower concentration of ionomer on the top surface. Using x-ray computed tomography, we are able to characterize the ionomer distribution throughout the thickness of the layer. We find that, in addition to promoting an ionomer-rich top surface, water-rich inks lead to a more homogenous distribution of ionomer, whereas a 1-propanol-rich ink leads to a more irregular distribution. It is found that MEA performance is improved by selecting conditions and ink formulations that promote ionomer enrichment at the top surface to facilitate a good interface with the membrane. MEAs prepared with a 75 wt% water catalyst ink with a 0.9 I/C have equivalent performance to spray-coated GDEs. Critically, these R2R-coated GDEs do not need an additional ionomer overlayer like the spray-coated GDEs do, reducing the number of processing steps in a manufacturing setting. This work shows that with the appropriate selection of materials, ink formulation, and processing conditions gas-diffusion electrodes are a viable pathway for fuel cell manufacturing.

ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION↗
DOE OSTI2021

Crosslinked Matrimid®-like polyimide membranes with unimodal network structure for enhanced stability and gas separation performance

Gas separation membranes have attracted academic and industrial attention, and crosslinking has been identified to be one of the most effective ways to enhance membrane stability. In this paper, a series of crosslinked Matrimid®-like films with unimodal network structures are prepared via thermally end-linking phenylethnyl-terminated BTDA-DAPI oligomers with well-controlled molecular weight (i.e., 3000–15,000 g/mol), wherein the crosslink density (the inter-crosslink chain length) of resulting unimodal networks is systematically varied by using oligomers with various molecular weight. Comprehensive characterizations of chemical structure, thermal properties, microstructures are performed. Pure-gas permeation measurements are performed focusing on H 2 /CH 4 and CO 2 /CH 4 separations as a function of crosslink density. In sharp contrast to the commonly observed permeability reduction in randomly crosslinked networks, all the crosslinked unimodal films, even when densely crosslinked, present markedly enhanced permeability and well-maintained ideal selectivity relative to the uncrosslinked linear counterpart, leading to almost horizontal movements towards upper bounds along with expectedly enhanced membrane stability. In conclusion, it is concluded that introducing bulky groups at the crosslink sites provide a practical means to counteract the densification effect induced by crosslinking and the construction of unimodal networks exemplifies a fundamentally new strategy to regulate the microstructure and property of crosslinked membranes for gas separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Adsorption-based membranes for air separation using transition metal oxides

In this work, we use computational modeling to examine the viability of adsorption-based pore-flow membranes for separating gases when a purely size-based separation strategy is ineffective. Using molecular dynamics simulations of O 2 and N 2 , we model permeation through a nanoporous graphene membrane. Permeation is assumed to follow a five-step adsorption-based pathway, with desorption being the rate-limiting step. Using this model, we observe increased selectivity between O 2 and N 2 , resulting from increased adsorption energy differences. We explore the limits of this strategy, providing an initial set of constraints that need to be satisfied to allow for selectivity. Finally, we provide a preliminary exploration of some transition metal oxides that appear to satisfy those conditions. Using density functional theory calculations, we confirm that these oxides possess adsorption energies needed to operate as adsorption-based pore-flow membranes. These adsorption energies provide a suitable motivation to examine adsorption-based pore-flow membranes as a viable option for air separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Leveraging microfluidic dielectrophoresis to distinguish compositional variations of lipopolysaccharide in E. coli

Lipopolysaccharide (LPS) is the unique feature that composes the outer leaflet of the Gram-negative bacterial cell envelope. Variations in LPS structures affect a number of physiological processes, including outer membrane permeability, antimicrobial resistance, recognition by the host immune system, biofilm formation, and interbacterial competition. Rapid characterization of LPS properties is crucial for studying the relationship between these LPS structural changes and bacterial physiology. However, current assessments of LPS structures require LPS extraction and purification followed by cumbersome proteomic analysis. This paper demonstrates one of the first high-throughput and non-invasive strategies to directly distinguish Escherichia coli with different LPS structures. Using a combination of three-dimensional insulator-based dielectrophoresis (3DiDEP) and cell tracking in a linear electrokinetics assay, we elucidate the effect of structural changes in E. coli LPS oligosaccharides on electrokinetic mobility and polarizability. We show that our platform is sufficiently sensitive to detect LPS structural variations at the molecular level. To correlate electrokinetic properties of LPS with the outer membrane permeability, we further examined effects of LPS structural variations on bacterial susceptibility to colistin, an antibiotic known to disrupt the outer membrane by targeting LPS. Our results suggest that microfluidic electrokinetic platforms employing 3DiDEP can be a useful tool for isolating and selecting bacteria based on their LPS glycoforms. Future iterations of these platforms could be leveraged for rapid profiling of pathogens based on their surface LPS structural identity.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Recent Advances in Functional Materials through Cellulose Nanofiber Templating

Advanced templating techniques have enabled delicate control of both nano- and microscale structures and have helped thrust functional materials into the forefront of society. Cellulose nanomaterials are derived from natural polymers and show promise as a templating source for advanced materials. Use of cellulose nanomaterials in templating combines nanoscale property control with sustainability, an attribute often lacking in other templating techniques. Use of cellulose nanofibers for templating has shown great promise in recent years, but previous reviews on cellulose nanomaterial templating techniques have not provided extensive analysis of cellulose nanofiber templating. Cellulose nanofibers display several unique properties, including mechanical strength, porosity, high water retention, high surface functionality, and an entangled fibrous network, all of which can dictate distinctive aspects in the final templated materials. Many applications exploit the unique aspects of templating with cellulose nanofibers that help control the final properties of the material, including, but not limited to, applications in catalysis, batteries, supercapacitors, electrodes, building materials, biomaterials, and membranes. A detailed analysis on the use of cellulose nanofibers templating is provided, addressing specifically how careful selection of templating mechanisms and methodologies, combined toward goal applications, can be used to directly benefit chosen applications in advanced functional materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Structural insights on ligand recognition at the human leukotriene B4 receptor 1

The leukotriene B4 receptor 1 (BLT1) regulates the recruitment and chemotaxis of different cell types and plays a role in the pathophysiology of infectious, allergic, metabolic, and tumorigenic human diseases. Here we present a crystal structure of human BLT1 (hBLT1) in complex with a selective antagonist MK-D-046, developed for the treatment of type 2 diabetes and other inflammatory conditions. Comprehensive analysis of the structure and structure-activity relationship data, reinforced by site-directed mutagenesis and docking studies, reveals molecular determinants of ligand binding and selectivity toward different BLT receptor subtypes and across species. The structure helps to identify a putative membrane-buried ligand access channel as well as potential receptor binding modes of endogenous agonists. These structural insights of hBLT1 enrich our understanding of its ligand recognition and open up future avenues in structure-based drug design.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Facilitated transport membranes for H 2 purification from coal-derived syngas: A techno-economic analysis

A single-stage membrane process has been designed for using facilitated transport membranes (FTMs) to decarbonize the coal-derived syngas from an integrated gasification combined cycle (IGCC) power plant. The necessary process model and costing method have also been developed to assess the technical feasibility and process economics. In order to account for the carrier saturation phenomenon associated with FTMs, a homogeneous reactive diffusion model is integrated into the process model. The techno-economic study reveals that the mitigated carrier saturation upon bulk CO 2 removal can lead to appreciable increases in the CO 2 permeance and CO 2 /H 2 selectivity, which can be utilized to achieve 95% CO 2 purity and 95% H 2 recovery with a CO 2 /H 2 selectivity of 50 at the complete carrier saturation. FTMs with different facilitated transport characteristics can also be arranged in a hybrid membrane configuration to render a H 2 recovery of 99% and a cost of electricity of $\$118.5$ /MWh, which is 12.5% lower than that of the benchmark Selexol process.

42 ENGINEERING↗
DOE OSTI2022

Absolute vs Convective Instabilities and Front Propagation in Lipid Membrane Tubes

Here we analyze the stability of biological membrane tubes, with and without a base flow of lipids. Membrane dynamics are completely specified by two dimensionless numbers: the well-known Föppl-von Kármán number Γ and the recently introduced Scriven-Love number SL, respectively quantifying the base tension and base flow speed. For unstable tubes, the growth rate of a local perturbation depends only on Γ, whereas SL governs the absolute versus convective nature of the instability. Furthermore, nonlinear simulations of unstable tubes reveal an initially localized disturbance result in propagating fronts, which leave a thin atrophied tube in their wake. Depending on the value of Γ, the thin tube is connected to the unperturbed regions via oscillatory or monotonic shape transitions-reminiscent of recent experimental observations on the retraction and atrophy of axons. We elucidate our findings through a weakly nonlinear analysis, which shows membrane dynamics may be approximated by a model of the class of extended Fisher-Kolmogorov equations. Our study sheds light on the pattern selection mechanism in axonal shapes by recognizing the existence of two Lifshitz points, at which the front dynamics undergo steady-to-oscillatory bifurcations.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Superselective Removal of Lead from Water by Two-Dimensional MoS 2 Nanosheets and Layer-Stacked Membranes

Point-of-use (POU) devices with satisfactory lead (Pb 2+ ) removal performance are urgently needed in response to recent outbreaks of lead contamination in drinking water. This study experimentally demonstrated the excellent lead removal capability of two-dimensional (2D) MoS 2 nanosheets in aqueous form and as part of a layer-stacked membrane. Among all materials ever reported in the literature, MoS 2 nanosheets exhibit the highest adsorption capacity (740 mg/g), and the strongest selectivity/affinity toward Pb 2+ with a distribution coefficient K d that is orders of magnitude higher than that of other lead adsorption materials (5.2 × 10 7 mL/g). Density functional theory (DFT) simulation was performed to complement experimental measurements and to help understand the adsorption mechanisms. The results confirmed that the cation selectivity of MoS 2 follows the order Pb 2+ > Cu 2+ >> Cd 2+ > Zn 2+ , Ni 2+ > Mg 2+ , K + , Ca 2+ . The membrane formed with layer-stacked MoS 2 nanosheets exhibited a high water flux (145 L/m 2 /h/bar), while effectively decreasing Pb 2+ concentration in drinking water from a few mg/L to less than 10 μg/L. The removal capacity of the MoS 2 membrane is a few orders of magnitude higher than that of other literature-reported membrane filters. Therefore, the layer-stacked MoS 2 membrane has great potential for POU removal of lead from drinking water.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Carbon molecular-sieve membranes developed from a Tröger’s base polymer and possessing superior gas-separation performance

Carbon molecular-sieve membranes possess tremendous practical advantages over unary polymer membranes by providing high gas-separation performance levels, coupled with excellent mechanical and chemical stability. Improving their overall effectiveness greatly expands the competitiveness of this class of membranes. In the present study, carbon membranes are fabricated from a Tröger’s base polymer as the precursor. Further, by optimizing the carbonization conditions, the gas-separation performance of the resultant membranes are significantly enhanced. Under optimized conditions, a H 2 permeability of up to 1135 Barrer is achieved, with a corresponding H 2 /CH 4 selectivity of 1170 and a CO 2 /CH 4 selectivity of 238. While increasing the operating temperature slightly reduces the selectivity, it still remains in the high-separation region. Overall, the measured separation performance levels for H 2 -related separations, i.e., H 2 /CH 4 , H 2 /N 2 and H 2 /CO 2 , all substantially exceed the Robeson upper bound. Moreover, the CO 2 /CH 4 separation efficacy also lies above the 2019 upper bound, indicating that the carbon membranes developed in the present work are versatile and promising for many different gas-separation applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Above‐T g Annealing Benefits in Nanoparticle‐Stabilized Carbon Molecular Sieve Membrane Pyrolysis for Improved Gas Separation

Abstract Nanoparticles can suppress asymmetric precursor support collapse during pyrolysis to create carbon molecular sieve (CMS) membranes. This advance allows elimination of standard sol‐gel support stabilization steps. Here we report a simple but surprisingly important thermal soaking step at 400 °C in the pyrolysis process to obtain high performance CMS membranes. The composite CMS membranes show CO 2 /CH 4 (50 : 50) mixed gas feed with an attractive CO 2 /CH 4 selectivity of 134.2 and CO 2 permeance of 71 GPU at 35 °C. Furthermore, a H 2 /CH 4 selectivity of 663 with H 2 permeance of 240 GPU was achieved for promising green energy resource‐H 2 separation processes.

Cao, Yuhe↗
DOE OSTI2022

Electronic Structure Calculations of the Fundamental Interactions in Solvent Extraction Desalination

Solvent extraction desalination (SED) is a promising membrane-free desalination technology, but new solvents are still needed that can improve the molecular-level water selectivity, while minimizing solvent contamination in the aqueous phase. Improvements in solvent design for SED require a fundamental understanding of the molecular interactions governing solvation behavior. Herein, quantum chemical calculations are used to delineate different fundamental interactions in water-solvent systems involving 38 different solvents, with a particular focus on the role of the electrostatic potential characteristics. Furthermore, these interactions are rigorously analyzed using the independent gradient model based on Hirshfeld partition (IGMH), Symmetry-Adapted Perturbation Theory (SAPT), as well as the energy decomposition analysis based on force field (EDA-FF) to compare against a standard force field model. The solvation free energies and partition coefficients are also calculated to estimate water extraction performance in a bulk solvent system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Improved Rate for the Oxygen Reduction Reaction in a Sulfuric Acid Electrolyte using a Pt(111) Surface Modified with Melamine

The feasible commercialization of alkaline, phosphoric acid and polymer electrolyte membrane fuel cells depends on the development of oxygen reduction reaction (ORR) electrocatalysts with improved activity, stability, and selectivity. The rational design of surfaces to ensure these improved ORR catalytic requirements relies on the so-called "descriptors" (e.g., the role of covalent and noncovalent interactions on platinum surface active sites for ORR). Here, we demonstrate that through the molecular adsorption of melamine onto the Pt(111) surface [Pt(111)-M ad ], the activity can be improved by a factor of 20 compared to bare Pt(111) for the ORR in a strongly adsorbing sulfuric acid solution. Additionally, the M ad moieties act as "surface-blocking bodies," selectively hindering the adsorption of (bi)sulfate anions (well-known poisoning spectator of the Pt(111) active sites) while the ORR is unhindered. This modified surface is further demonstrated to exhibit improved chemical stability relative to Pt(111) patterned with cyanide species (CN ad ), previously shown by our group to have a similar ORR activity increase compared to bare Pt(111) in a sulfuric acid electrolyte, with Pt(111)-M ad retaining a greater than ninefold higher ORR activity relative to bare Pt(111) after extensive potential cycling as compared to a greater than threefold higher activity retained on a CN ad -covered Pt(111) surface. We suggest that the higher stability of the Pt(111)-M ad interface stems from melamine's ability to form intermolecular hydrogen bonds, which effectively turns the melamine molecules into larger macromolecular entities with multiple anchoring sites and thus more difficult to remove.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Towards rational control of seed oil composition: dissecting cellular organization and flux control of lipid metabolism

Plant lipids represent a fascinating field of scientific study, in part due to a stark dichotomy in the limited fatty acid (FA) composition of cellular membrane lipids vs the huge diversity of FAs that can accumulate in triacylglycerols (TAGs), the main component of seed storage oils. With few exceptions, the strict chemical, structural, and biophysical roles imposed on membrane lipids since the dawn of life have constrained their FA composition to predominantly lengths of 16–18 carbons and containing 0–3 methylene-interrupted carbon-carbon double bonds in cis-configuration. However, over 450 “unusual” FA structures can be found in seed oils of different plants, and we are just beginning to understand the metabolic mechanisms required to produce and maintain this dichotomy. Here we review the current state of plant lipid research, specifically addressing the knowledge gaps in membrane and storage lipid synthesis from 3 angles: pathway fluxes including newly discovered TAG remodeling, key acyltransferase substrate selectivities, and the possible roles of “metabolons.”

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Engineering well-expressed, V2-immunofocusing HIV-1 envelope glycoprotein membrane trimers for use in heterologous prime-boost vaccine regimens

HIV-1 vaccine immunofocusing strategies may be able to induce broadly-reactive neutralizing antibodies (NAbs). Here, we engineered a panel of diverse, membrane-resident native HIV-1 trimers vulnerable to two broad targets—the V2 apex and fusion peptide (FP). Selection criteria included i) high expression and ii) infectious function, so that trimer neutralization sensitivity can be profiled in pseudovirus (PV) assays. Initially, we boosted the expression of 17 candidate trimers by truncating gp41 and introducing a gp120-gp41 SOS disulfide to prevent gp120 shedding. "Repairs" were made to fill glycan holes and eliminate other strain-specific aberrations. A new neutralization assay allowed PV infection when our standard assay was insufficient. Trimers with exposed V3 loops, a target of non-NAbs, were discarded. To try to increase V2-sensitivity, we removed clashing glycans and modified the C-strand. Notably, a D167N mutation improved V2-sensitivity in several cases. Glycopeptide analysis of JR-FL trimers revealed near complete sequon occupation and that filling the N197 glycan hole was well-tolerated. In contrast, sequon optimization and inserting/removing glycans at other positions frequently had global "ripple" effects on glycan maturation and sequon occupation throughout the gp120 outer domain and gp41. V2 MAb CH01 selectively bound to trimers with small high mannose glycans near the base of the V1 loop, thereby avoiding clashes. Knocking in a rare N49 glycan was found to perturb gp41 glycans, increasing FP NAb sensitivity—and sometimes improving expression. Finally, a biophysical analysis of VLPs revealed that i) ~25% of particles bear Env spikes, ii) spontaneous particle budding is high and only increases 4-fold upon Gag transfection, and iii) Env+ particles express ~30–40 spikes. Taken together, we identified 7 diverse trimers with a range of sensitivities to two targets to allow rigorous testing of immunofocusing vaccine concepts.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2026

Dataset for Top Model Decision Tree: Selecting Segmentation Models for Reliable Quantitative Analysis in Low- and Ultralow-Dose CryoEM

Motivation Multiple deep learning model architectures can be used to segment bacterial membranes in cryoEM images. However, an AI-based tool advancement is often presented with only a single segmentation model for broad use, and this single model may show inconsistent results across datasets from different users. Here, we present the Top Model Decision Tree, a model screening framework to screen for the best model to generate bacterial inner and outer membrane masks based on user priorities. We use pre-trained segmentation models from YOLOv11, YOLO26, U-Net, Detectron2 and SAM3 fine-tuned on bacterial inner and outer membranes imaged with cryoEM. Run the Framework This notebook must be opened in Google Colab. Mount Google Drive and run with a GPU-based runtime. Open the notebook and follow steps to git clone in folders and files within this repository. There will be a repeating top_model_decision_tree.ipynb (notebook clone) that will not be used. Save your .png binary mask files and .csv table outputs within your Google Drive or download before closing the notebook. The models and all analysis/training scripts are available at [GitHub: https://github.com/Lynnicia/CryoEM_membranes_top_model_decision_tree and https://github.com/Sireesiru/Semantic-Segmentation-of-bacterial-cell-envelope-using-U-Nets.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

New directions and principles for solvent extraction for recovery of lithium from aqueous brines and mineral leachates: A brief review

Increasing demand for lithium for manufacturing of batteries is fueling the unprecedented search for improved recovery and alternative sources. Wider source distribution, lower energy consumption, and greater sustainability make extraction of lithium from brines, both natural and process-derived, an attractive alternative to mineral ores. Solvent extraction, used industrially for production of metals, salts, and pharmaceuticals, has been investigated as a methodology for lithium recovery for several decades. However, industrial application of solvent extraction for lithium recovery has so far been limited. In contrast, direct lithium extraction using adsorbents based on inorganic minerals has rapidly advanced from research to commercialization. A comparison of solvent extraction processes to adsorption highlights these issues and explains the preference for adsorbents. Although the application of solvent extraction has been criticized for use of large amounts of acid, alkali, and organic solvents, steady progress has been made to improve its potential for industrial lithium production, spurred on generally by the advantages of solvent extraction in selectivity and throughput. Previously developed beta-diketone, organophosphate, and crown ether ligands are being adapted and improved. Their novel use with ionic liquids, deep eutectic solvents, and membrane technologies promises to expand capabilities for extraction of lithium from dilute aqueous sources while improving sustainability. Possibilities for further discovery and innovation abound. In this review, we provide a unique perspective from the field of solvent extraction starting with fundamentals such as ion-transfer theory and apply them to understanding lithium selectivity and extraction behavior. In conclusion, the results are cast in the light of the practical realities of developing economical solvent extraction processes.

Brine↗