Search NASA⌕ Search

SEARCH · Search NASA

Results for “ordered statistics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Asymptotic behavior of a flat plate wake

An experimental study has been conducted to investigate the far-field, self-similar properties of a flat plate wake. A plane turbulent wake was generated at the trailing edge of a smooth splitter plate separating two legs of a Mixing Layer Wind Tunnel, with both initial boundary layers tripped. For the present study, both legs were operated at a free-steam velocity in the test section of 15 m/s, giving a Reynolds number based on wake momentum thickness of about 1750. Single profile measurements were obtained at five streamwise locations using a Pitot probe for the mean velocity measurements and a single cross-wire probe for the turbulence data, which included statistics up to third order. The mean flow data indicated a self-similar behavior beyond a streamwise distance equivalent to about 350 wake momentum thicknesses. However, the turbulence data show better collapse beyond a distance equivalent to about 500 momentum thicknesses, with all the measured peak Reynolds stresses achieving constant, asymptotic levels. The asymptotic mean flow behavior and peak primary stress levels agree well with theoretical predictions based on a constant eddy viscosity model. The present data also agree reasonably well with previous measurements, of which only one set extends into the self-similar region. Detailed comparisons with previous data are presented and discussed in this report.

Weygandt, James H.↗

How much redundancy: Some cost considerations, including examples for spacecraft systems

How much redundancy should be built into a subsystem such as a space power subsystem. How does a reliability or design engineer choose between a power subsystem with 0.990 reliability and a more costly subsystem with 0.995 reliability. How does the engineer designing a power subsystem for a satellite decide between one power subsystem and a more reliable but heavier power subsystem. High reliability is not necessarily an end in itself. High reliability may be desirable in order to reduce the statistically expected loss due to a subsystem failure. However, this may not be the wisest use of funds since the expected loss due to subsystem failure is not the only cost involved. The subsystem itself may be very costly. The cost of the subsystem or the expected loss due to subsystem failure may not be considered separately. Therefore, the total of the two costs is minimized, i.e., the total of the cost of the subsystem plus the expected loss due to subsystem failure. A specific type of redundant system is considered, called a k-out-of-n: G subsystem. Such a subsystem has n modules, of which k are required to be good for the subsystem to be good. Five models are discussed which can be applied in the design of a power subsystem to select the unique redundancy method which will minimize the total of the cost of the power subsystem plus the expected loss due to the power subsystem failure. A BASIC computer program is available.

Suich, Ronald C.↗

Mg II absorption in the spectra of 103 QSOs - Implications for the evolution of gas in high-redshift galaxies

Spectra of 103 low- and intermediate-redshift QSOs with a resolution of 4-6 A were obtained in order to investigate the statistics of the M II 2796, 2803 absorption systems over the redshift range of 0.2-2.2. New emission-line redshifts, based mostly on Mg II 2800 and semiforbidden 1909, were determined for the QSOs. The mean number density of Mg II absorbers per unit redshift range decreased from 0.97 +/-0.10 for a rest equivalent width threshold of 0.3 A to 0.27 +/-0.05 for a threshold of 1.0 A. The results are in agreement with comparable previous work. The observed equivalent width distribution could be fitted with either exponential or power-law analytic distributions, with parameters in line with those found in earlier studies. Statistical tests show that the Mg II absorbers are uniformly distributed in both comoving coordinates and velocity relative to the QSO.

Steidel, Charles C.↗

Estimating the instabilities of N clocks by means of comparison measurements

The estimation of individual instabilities of N clocks, compared by measuring the differences of their readings, is considered without assuming a priori any hypotheses on their uncorrelation. Instabilities of the N clocks are described by a complete (non-diagonal) N x N covariance matrix R. Only differences of clock readings are available in order to estimate R. Statistical processing of these data allows one to calculate the (N-1)x(N-l) covariance matrix S of the differences relative to the N-th(reference) clock. By analyzing the relationships tying R and S, several pieces of information can be inferred and, in particular, the conditions for the validity of the uncorrelation hypothesis are established. The estimation of R from S is not unique: in any case R must be positive definite. A theorem states that R is positive definite if and only if its determinant is positive. Nevertheless infinitely many acceptable choices of R still fulfill the condition of positive definiteness. This paper shows that, by increasing the number N of compared clocks, the amount of arbitrariness in estimating R is reduced. The analysis of some experimental data illustrates the capability of the method.

Premoli, Amedeo↗

Assessment of Error in Synoptic-Scale Diagnostics Derived from Wind Profiler and Radiosonde Network Data

A topic of current practical interest is the accurate characterization of the synoptic-scale atmospheric state from wind profiler and radiosonde network observations. We have examined several related and commonly applied objective analysis techniques for performing this characterization and considered their associated level of uncertainty both from a theoretical and a practical standpoint. A case study is presented where two wind profiler triangles with nearly identical centroids and no common vertices produced strikingly different results during a 43-h period. We conclude that the uncertainty in objectively analyzed quantities can easily be as large as the expected synoptic-scale signal. In order to quantify the statistical precision of the algorithms, we conducted a realistic observing system simulation experiment using output from a mesoscale model. A simple parameterization for estimating the uncertainty in horizontal gradient quantities in terms of known errors in the objectively analyzed wind components and temperature is developed from these results.

Mace, Gerald G.↗

Multifractal scaling of the kinetic energy flux in solar wind turbulence

The geometrical and scaling properties of the energy flux of the turbulent kinetic energy in the solar wind have been studied. By present experimental technology in solar wind measurements, we cannot directly measure the real volumetric dissipation rate, epsilon(t), but are constrained to represent it by surrogating the energy flux near the dissipation range at the proton gyro scales. There is evidence for the multifractal nature of the so defined dissipation field epsilon(t), a result derived from the scaling exponents of its statistical q-th order moments. The related generalized dimension D(q) has been determined and reveals that the dissipation field has a multifractal structure. which is not compatible with a scale-invariant cascade. The associated multifractal spectrum f(alpha) has been estimated for the first time for MHD turbulence in the solar wind. Its features resemble those obtained for turbulent fluids and other nonlinear multifractal systems. The generalized dimension D(q) can, for turbulence in high-speed streams, be fitted well by the functional dependence of the p-model with a comparatively large parameter, p = 0.87. indicating a strongly intermittent multifractal energy cascade. The experimental value for D(p)/3, if used in the scaling exponent s(p) of the velocity structure function, gives an exponent that can describe some of the observations. The scaling exponent mu of the auto correlation function of epsilon(t) has also been directly evaluated. It has the value of 0.37. Finally. the mean dissipation rate was determined, which could be used in solar wind heating models.

Marsch, E.↗

An Intercomparison of the Dynamical Cores of Global Atmospheric Circulation Models for Mars

This is a Final Report for a Joint Research Interchange (JRI) between NASA Ames Research Center and San Jose State University, Department of Meteorology. The focus of this JRI has been to evaluate the dynamical "cores" of two global atmospheric circulation models for Mars that are in operation at the NASA Ames Research Center. The two global circulation models in use are fundamentally different: one uses spherical harmonics in its horizontal representation of field variables; the other uses finite differences on a uniform longitude-latitude grid. Several simulations have been conducted to assess how the dynamical processors of each of these circulation models perform using identical "simple physics" parameterizations. A variety of climate statistics (e.g., time-mean flows and eddy fields) have been compared for realistic solstitial mean basic states. Results of this research have demonstrated that the two Mars circulation models with completely different spatial representations and discretizations produce rather similar circulation statistics for first-order meteorological fields, suggestive of a tendency for convergence of numerical solutions. Second and higher-order fields can, however, vary significantly between the two models.

Hollingsworth, Jeffery L.↗

An Intercomparison of the Dynamical Cores of Global Atmospheric Circulation Models for Mars

This is a Final Report for a Joint Research Interchange (JRI) between NASA Ames Research Center and San Jose State University, Department of Meteorology. The focus of this JRI has been to evaluate the dynamical 'cores' of two global atmospheric circulation models for Mars that are in operation at the NASA Ames Research Center. The two global circulation models in use are fundamentally different: one uses spherical harmonics in its horizontal representation of field variables; the other uses finite differences on a uniform longitude-latitude grid. Several simulations have been conducted to assess how the dynamical processors of each of these circulation models perform using identical 'simple physics' parameterizations. A variety of climate statistics (e.g., time-mean flows and eddy fields) have been compared for realistic solstitial mean basic states. Results of this research have demonstrated that the two Mars circulation models with completely different spatial representations and discretizations produce rather similar circulation statistics for first-order meteorological fields, suggestive of a tendency for convergence of numerical solutions. Second and higher-order fields can, however, vary significantly between the two models.

Hollingsworth, Jeffery L.↗

An Intercomparison of the Dynamical Cores of Global Atmospheric Circulation Models for Mars

This is a Final Report for a Joint Research Interchange (JRI) between NASA Ames Research Cen- ter and San Jose State University, Department of Meteorology. The focus of this JRI has been to evaluate the dynamical "cores" of two global atmospheric circulation models for Mars that are in operation at the NASA Ames Research Center. ne two global circulation models in use are fundamentally different: one uses spherical harmonics in its horizontal representation of field variables; the other uses finite differences on a uniform longitude-latitude grid. Several simulations have been conducted to assess how the dynamical processors of each of these circulation models perform using identical "simple physics" parameterizations. A variety of climate statistics (e.g., time-mean flows and eddy fields) have been compared for realistic solstitial mean basic states. Results of this research have demonstrated that the two Mars circulation models with completely different spatial representations and discretizations produce rather similar circulation statistics for first-order meteorological fields, suggestive of a tendency for convergence of numerical solutions. Second and higher-order fields can, however, vary significantly between the two models.

Hollingsworth, Jeffery L.↗

VEXT: A Virtual Observatory Exploration Toolkit

This final report consists of two main parts. The first is taken from a paper by the PiCA (Pittsburgh Computational Astrostatistics) Group which describes our ongoing work in fast computation of n-point correlation functions. We present here a new algorithm for the fast computation of N-point correlation functions in large astronomical data sets. The algorithm is based on kd-trees which are decorated with cached sufficient statistics thus allowing for orders of magnitude speed-ups over the naive non-tree-based implementation of correlation functions. We further discuss the use of controlled approximations within the computation which allows for further acceleration. In summary, our algorithm now makes it possible to compute exact, all-pairs, measurements of the two, three and four-point correlation functions for cosmological data sets like the Sloan Digital Sky Survey and the next generation of Cosmic Microwave Background experiments. The second part summarizes the progress made by the PiCA Group in this area through the AISR grant.

Schneider, Jeff↗

Comparison of IC and MEMS packaging reliability approaches

This paper reviews the current status of IC and MEMS packaging technology with emphasis on reliability, compares the norm for IC packaging reliability evaluation and identifies challenges for development of reliability methodologies for MEMS, and finally, proposes the use of COTS MEMS in order to start generating statistically meaningful reliability data as a vehicle for future standardization of reliability test methodology for MEMS packaging.

microelectromechanical systems (MEMS) chip scale p↗

Interim Findings of ACTS Ka-Band Propagation Campaign

The ACTS propagation campaign is focusing on two broad areas: 1) Rain/signal attenuation data collection at seven sites in North America, 2) Theoretical and empirical consideratons for a global model to predict first & second order temporal and spatial statistics on attenuation, scintillation, conherence bandwidth, and depolarization due to weather (precipitation and atmospheric including interaction of weather with the antenna) for satellite systems at Ka-band.

propagation beacons Ka-Band satellite communicatio↗

The Miniaturized Moessbauer Spectrometers MIMOS II on MER: Four Years of Operation - A Summary

The two Miniaturized Moessbauer Spectrometers (MIMOS II) on board the two Mars Exploration Rovers Spirit and Opportunity have now been collecting important scientific data for more than four years. The spectrometers provide information about Fe-bearing mineral phases and determine Fe oxidation states. The total amount of targets analized exceeds 600, the total integration time exceeds 260 days for both rovers. Since landing, more than five half-lives of the Co-57 MB sources have past (intensity at the time of landing approx. 150 mCi). Current integration times are about 50 hours in order to achieve reasonable statistics as opposed to 8 hours at the beginning of the mission. In total, 13 different mineral phases were detected: Olivine, pyroxene, hematite, magnetite and nanophase ferric oxide were detected at both landing sites. At Gusev, ilmenite, goethite, a ferric sulfate phase and a yet unassigned phase (in the rock Fuzzy Smith) were detected. At Meridiani, jarosite, metallic iron in meteoritic samples (kamacite), troilite, and an unassigned ferric phase were detected. Jarosite and goethite are of special interest, as these minerals are indicators for water activity. In this abstract, an overview of Moessbauer results will be given, with a focus on data obtained since the last martian winter. The MER mission has proven that Moessbauer spectroscopy is a valuable tool for the in situ exploration of extraterrestrial bodies and for the study of Febearing samples. The experience gained through the MER mission makes MIMOS II a obvious choice for future missions to Mars and other targets. Currently, MIMOS II is on the scientific payload of two approved future missions: Phobos Grunt (Russian Space Agency; 2009) and ExoMars (European Space Agency; 2013).

Fleischer, I.↗

Analysis Resistant Cipher Method and Apparatus

A system for encoding and decoding data words including an anti-analysis encoder unit for receiving an original plaintext and producing a recoded data, a data compression unit for receiving the recoded data and producing a compressed recoded data, and an encryption unit for receiving the compressed recoded data and producing an encrypted data. The recoded data has an increased non-correlatable data redundancy compared with the original plaintext in order to mask the statistical distribution of characters in the plaintext data. The system of the present invention further includes a decryption unit for receiving the encrypted data and producing a decrypted data, a data decompression unit for receiving the decrypted data and producing an uncompressed recoded data, and an anti-analysis decoder unit for receiving the uncompressed recoded data and producing a recovered plaintext that corresponds with the original plaintext.

Oakley, Ernest C.↗

InSight Entry, Descent and Landing Pre-Flight Performance Predictions

On November 26, 2018, the Interior Exploration using Seismic Investigations, Geodesy and Heat Transport (InSight) lander successfully touched down on the surface of Mars. Over its seven-plus year development, NASA Langley Research Center’s (LaRC) Program to Optimize Simulated Trajectories II (POST2) was used to assess the mission’s Entry, Descent and Landing (EDL) vehicle system performance against related requirements across the full range of possible environmental and spacecraft conditions. Much of the simulation code was derived from the Phoenix mission, for which this vehicle is very similar. The InSight six degree-of-freedom simulation included models for Mars atmosphere, gravity and digital elevation maps of the landing location. Additionally, vehicle specific aerodynamic, parachute, engine, navigation sensor, flight software and landing radar models were also included. A set of dispersions for each model, as well as for additional simulation input parameters, were also included in order to provide a statistical, Monte Carlo prediction of the EDL system performance. An overview of the pre-flight performance assessments completed, including the various simulation campaigns used, will be provided. Ultimately, this work was critical in the assessment of readiness for InSight launch. A brief description of the use of this simulation in support of flight operations is also discussed.

Robert W Maddock↗

Investigation on the Origins of Comets as Revealed through IR High Resolution Spectroscopy: I. Molecular Abundances

We report and analyze molecular abundances updatedin twenty comets by employingmodern data reduction procedures and molecular models. Using boxplots and scatterplots, we examine how the different molecular species are distributed among the comet population, while by means of pie charts we investigate the relative proportions of these molecular species in each comet. We compare these results with the orbital parametersof the selected targets in order to identify trends related to the dynamical history of each comet. In this way, we identify at least three chemical classes based mainly on relative abundances of CO, CH3OH, CH4, C2H6, HCN and NH3. The combination of relative abundances and orbital parameters is then compared with chemical models of planetary system formation and may offer an alternative approach to investigate the origin and evolution of the material in cometary nuclei.Our study also confirms the need to add more objects to our sample in order to improve the statistics, especially for hyper-volatiles (i.e. CH4and CO) in Jupiter Family comets.

M Lippi↗

A LASER INTERFERENCE-BASED SURFACE TREATMENT OF AL AND CARBON FIBER POLYMER COMPOSITES FOR ENHANCED BONDING

Due to its increased use in the automotive and aerospace industries, joining of Carbon Fiber-reinforced Polymer matrix Composites (CFPC) to metals demands enhanced surface preparation and control of surface morphology prior to joining. In this study, surfaces of both composite and aluminum were prepared for joining using a new laser based technique, in which the laser interference power profile was created by splitting the beam and guiding those beams to the sample surface by overlapping each other with defined angles to each other. Results were presented for the overlap shear testing of single-lap joints made with Al 5182 and CFPC specimens whose surfaces prepared by (a) surface abrasion and solvent cleaning; and (b) laser-interference structured surfaces by rastering with a 4 mm laser beam at approximately 3.5 W power. CFPC specimens of T700S carbon fiber, Prepreg T70 epoxy, 4 or 5 ply thick, 0/90o plaques were used. Adhesive DP810 was used to bond Al and CFPC. The bondline was 0.25mm and the bond length was consistent among all joints produced. First, the effect of the laser speed on the joint performance was evaluated by laser-interference structure Al and CFPC surfaces with a beam angle of 3o and laser beam speeds of 3, 5, and 10 mm/s. For this sensitivity study, 3 joint specimens were used per each joint type. Based on the results for minimum, maximum, and mean values for the shear lap strength and maximum load for all the 9 joint types, two joint types were selected for further evaluations. Six additional joint specimens were prepared for these two joint types in order to obtain better statistics and the shear test data was presented for the range, mean, and standard deviation. The results for the single-lap shear tests obtained for six joint specimens, indicate that the shear lap strength, maximum load, and displacement at maximum load for those joints made with laser-interference structured surfaces were increased by approximately 14.8%, 16%, and 100%, respectively over those measured for the baseline joints.

Sabau, Adrian S↗

Statistical methodologies for the control of dynamic remapping

Following an initial mapping of a problem onto a multiprocessor machine or computer network, system performance often deteriorates with time. In order to maintain high performance, it may be necessary to remap the problem. The decision to remap must take into account measurements of performance deterioration, the cost of remapping, and the estimated benefits achieved by remapping. We examine the tradeoff between the costs and the benefits of remapping two qualitatively different kinds of problems. One problem assumes that performance deteriorates gradually, the other assumes that performance deteriorates suddenly. We consider a variety of policies for governing when to remap. In order to evaluate these policies, statistical models of problem behaviors are developed. Simulation results are presented which compare simple policies with computationally expensive optimal decision policies; these results demonstrate that for each problem type, the proposed simple policies are effective and robust.

Saltz, J. H.↗