SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This presentation discusses our initial observations about the Chaac-Camaxtli region of Jupiter's moon Io, using Galileo SSI and NIMS data from the February 2000 flyby (orbit I27) and planetary mapping. Additional information is contained in the original extended abstract.
There are numerous challenges associated with placing a spacecraft in orbit around Mars. Often. trades must be made such as the mass of the payload and the amount of fuel that can be carried. One technique employed to more efficiently place a spacecraft in orbit while maximizing payload mass (minimizing fuel use) is aerobraking. The Mars Odyssey Spacecraft made use of aerobraking to gradually reduce its orbit period from a highly elliptical insertion orbit to its final science orbit. Aerobraking introduces its own unique challenges, in particular, predicting the thermal response of the spacecraft and its components during each aerobraking drag pass. This paper describes the methods used to perform aerobraking thermal analysis using finite element thermal models of the Mars Odyssey Spacecraft's solar array. To accurately model the complex behavior during aerobraking, the thermal analysis must be tightly coupled to the spatially varying, time dependent aerodynamic heating analysis. Also, to properly represent the temperatures prior to the start of the drag pass. the model must include the orbital solar and planetary heat fluxes. It is critical that the thermal behavior be predicted accurately to maintain the solar array below its structural flight allowable temperature limit. The goal of this paper is to describe a thermal modeling method that was developed for this purpose.
This report summarizes work undertaken under a one-year grant from the NASA Mars Fundamental Research Program. The goal of the project was to initiate studies of the response of the Martian climate to changes in planetary obliquity and orbital elements. This work was undertaken with a three-dimensional numerical climate model based on the Geophysical Fluid Dynamics Laboratory (GFDL) Skyhi General Circulation Model (GCM). The Mars GCM code was adapted to simulate various obliquity and orbital parameter states. Using a version of the model with a basic water cycle (ice caps, vapor, and clouds), we examined changes in atmospheric water abundances and in the distribution of water ice sheets on the surface. This work resulted in a paper published in the Journal of Geophysical Research - Planets. In addition, the project saw the initial incorporation of a regolith water transport and storage scheme into the model. This scheme allows for interaction between water in the pores of the near subsurface (<3m) and the atmosphere. This work was not complete by the end of the one-year grant, but is now continuing within the auspices of a three-year grant of the same title awarded by the Mars Fundamental Research Program in late 2003.
Mars missions often employ aerobraking upon arrival at Mars as a low-mass method to gradually reduce the orbit period from a high-altitude, highly elliptical insertion orbit to the final science orbit. Two recent missions that made use of aerobraking were Mars Global Surveyor (MGS) and Mars Odyssey. Both spacecraft had solar arrays as the main aerobraking surface area. Aerobraking produces a high heat load on the solar arrays, which have a large surface area exposed to the airflow and relatively low mass. To accurately model the complex behavior during aerobraking, the thermal analysis must be tightly coupled to the flight mechanics, aerodynamics, and atmospheric modeling efforts being performed during operations. To properly represent the temperatures prior to and during the drag pass, the model must include the orbital solar and planetary heat fluxes. The correlation of the thermal model to flight data allows a validation of the modeling process, as well as information on what processes dominate the thermal behavior. This paper describes the thermal modeling method that was developed for this purpose, as well as correlation for two flight missions, and a discussion of improvements to the methodology.
Many of the major issues have been identified for a futuristic capability to protect against impacting comets and asteroids, and a preliminary space-based concept has been envisioned. Some of the basic concept elements, approaches, methodologies, and features have been identified. When contemplating the ability to monitor comets and asteroids continuously, there are many trade-offs between orbiting observatories and detection systems on planetary bodies without an atmosphere. Future orbit modification techniques have the potential for rapid and controlled alteration of NEO orbits, provided that high-power, compatible thermal management systems are developed. Much additional work and analysis are required to identify a final system concept, and many trade studies need to be performed to select the best mix of system capability, reliability, maintainability, and cost. Finally, it is fully appreciated that at the present time space systems are much more costly than terrestrial-based systems. Hopefully, this will change in the future. Regardless, understanding what it would take to defend against a much wider range of the impact threat will foster ideas, innovations, and technologies that could one day enable the development of such a system. This understanding is vital to provide ways of reducing the costs and quantifying the benefits that are achievable with a system like CAPS.
Aerobraking is an efficient technique for orbit adjustment of planetary spacecraft, such as Magellan (Venus), Mars Global Surveyor, and Mars Odyssey. Determination of the vehicle state during the aerobraking phase has conventionally been performed using only radiometric tracking data prior to and following the atmospheric drag pass. This approach is sufficiently accurate and timely to meet current mission operational requirements; however, it is expensive in terms of ground support and leads to delayed results because ofthe need for post-drag pass data. This research presents a new approach to estimation of the vehicle state during the atmospheric pass that sequentially incorporates observations from an Inertial Measurement Unit (IMU) and models of the vehicle and environment. The approach, called Inertial Measurements for Aerobraking Navigation (IMAN), is shown to perform at a level comparable to the conventional methods in terms of navigation accuracy and superior to them in terms of availability of the results immediately after completion ofthe pass. Furthermore, the research shows that IMAN can be used to reliably predict subsequent periapsis times and locations over all aerobraking regimes. IMAN also yields accurate peak dynamic pressure and heating rates, critical for a successful corridor control strategy, comparable to navigation team reconstructed values. This research also provides the first instance of the utilization of the Unscented Kalman Filter for the purpose of estimating an actual spacecraft trajectory arc about another planet.
The EVA Robotic Assistant is a prototype for an autonomous rover designed to assist human astronauts. The primary focus of the research is to explore the interaction between humans and robots, particularly in extreme environments, and to develop a software infrastructure that could be applied to any type of assistant robot, whether for planetary exploration or orbital missions. This paper describes the background and current status of the project, the types of scenarios addressed in field demonstrations, the hardware and software that comprise the current prototype, and future research plans.
Aerobraking has been used four times to decrease the apoapsis of a spacecraft in a captured orbit around a planetary body with a significant atmosphere utilizing atmospheric drag to decelerate the spacecraft. While aerobraking requires minimum fuel, the long time required for aerobraking requires both a large operations staff, and large Deep Space Network resources. A study to automate aerobraking has been sponsored by the NASA Engineering and Safety Center to determine initial feasibility of equipping a spacecraft with the onboard capability for autonomous aerobraking, thus saving millions of dollars incurred by a large aerobraking operations workforce and continuous DSN coverage. This paper describes the need for autonomous aerobraking, the development of the Autonomous Aerobraking Development Software that includes an ephemeris estimator, an atmospheric density estimator, and maneuver calculation, and the plan forward for continuation of this study.
A crewed mission to Mars poses a signi cant challenge in dealing with the physiolog- ical issues that arise with the crew being exposed to a near zero-gravity environment as well as signi cant solar and galactic radiation for such a long duration. While long sur- face stay missions exceeding 500 days are the ultimate goal for human Mars exploration, short round trip, short surface stay missions could be an important intermediate step that would allow NASA to demonstrate technology as well as study the physiological e ects on the crew. However, for a 1-year round trip mission, the outbound and inbound hy- perbolic velocity at Earth and Mars can be very large resulting in a signi cant propellant requirement for a high thrust system like Nuclear Thermal Propulsion (NTP). Similarly, a low thrust Nuclear Electric Propulsion (NEP) system requires high electrical power lev- els (10 megawatts electric (MWe) or more), plus advanced power conversion technology to achieve the lower speci c mass values needed for such a mission. A Bimodal Nuclear Thermal Electric Propulsion (BNTEP) system is examined here that uses three high thrust Bimodal Nuclear Thermal Rocket (BNTR) engines allowing short departure and capture maneuvers. The engines also generate electrical power that drives a low thrust Electric Propulsion (EP) system used for ecient interplanetary transit. This combined system can help reduce the total launch mass, system and operational requirements that would otherwise be required for equivalent NEP or Solar Electric Propulsion (SEP) mission. The BNTEP system is a hybrid propulsion concept where the BNTR reactors operate in two separate modes. During high-thrust mode operation, each BNTR provides 10's of kilo- Newtons of thrust at reasonably high speci c impulse (Isp) of 900 seconds for impulsive trans-planetary injection and orbital insertion maneuvers. When in power generation / EP mode, the BNTR reactors are coupled to a Brayton power conversion system allowing each reactor to generate 100's of kWe of electrical power to a very high Isp (3000 s) EP thruster system for sustained vehicle acceleration and deceleration in heliocentric space.
The difficulty in making global measurements in orbit close to planetary bodies (and in particular the Moon) seriously constrains our ability to collect crucial, high-resolution data. We describe a unique and groundbreaking approach using tethered subsatellites to make measurements arbitrarily close to planetary surfaces, particularly those with no atmosphere, and to determine altitude profiles of geophysical parameters. The approach is feasible with current technology, and the subsatellite could be as small as a CubeSat. The initial results of a feasibility study and mission design for a tethered lunar CubeSat indicate that it is achievable.
The monolithic steel plate traditionally used to intercept sabot pieces during light-gas gun operations was replaced by low density material. The idea was to decrease the shock stress in these plastic sabot pieces to values below the vaporization threshold, thereby reducing the prominent soot-deposits that characterize typical target surfaces. The project was a collaboration between Orbital Debris and Planetary Science interests at JSC/ARES.
PILS (Photovoltaic Investigation on the Lunar Surface) short presentation to the Lunar Reconnaissance Orbiter (LRO) virtual Planetary Science Working Group (PSWG) meeting. The presentation provides a general overview of the PILS project and the current status of the hardware.
Arcjet and ion propulsion offer potentially significant reductions in the mass of propulsion systems required for Earth orbiting satellites and planetary spacecraft. For this reason, they have been the subject of validation and demonstration programs. After examining the benefits of electric propulsion, this paper discusses the technology base for the Electric propulsion Space Experiment (ESEX) arcjet demonstration experiment and the NASA SEP Technology Application Readiness (NSTAR) ion propulsion validation program. As part of the Advanced Research and Global Observation Spacecraft (ARGOS), ESEX will perform ten 15-minute firings of a 30 kW ammonia arcjet. NASA's validation program, NSTAR, consists of two major elements: a ground-test element and an in-space experiment. The ground-test element will validate the life, intergrability, and performance of low-power ion propulsion. The in-space element will demonstrate the feasibility of integrating and flying an ion propulsion system. The experiment will measure the interactions among the ion propulsion system, the host spacecraft, and the surrounding space plasma; and it will provide a quantitative assessment of the ability of ground testing to replicate the in-space performance of ion thrusters. By involving industry in NSTAR, a commercial source for this technology will be ensured. Furthermore, the successful completion of the NSTAR validation program will stimulate commercial and government (both civilian and military) uses of this technology.
In-spiraling supermassive black holes should emit gravitational waves, which would produce characteristic distortions in the pulse time of arrival residuals from millisecond pulsars. There are multiple national and regional consortia that have constructed pulsar timing arrays by precise timing of different sets of millisecond pulsars. An essential aspect of precision timing is the transfer of the pulsar times of arrival to a (quasi-)inertial reference frame, conventionally taken to be the solar system barycenter. The solar system barycenter is determined from the knowledge of the planetary masses and orbits, which has been re ned over the course of the past 50 years by multiple spacecraft missions. Within the North American Nanohertz Observatory for Gravitational Waves (NANOGrav), uncertainties on the solar system barycenter are emerging as an important element of the overall NANOGrav noise budget. We describe what is known about the solar system barycenter, touch upon how uncertainties in it affect gravitational wave studies with pulsar timing arrays, and consider future trends in spacecraft navigation.
Aerodynamic characteristics of an aerocapture system intended to deliver a flagship-class orbiter and probe planetary science mission to Uranus are presented. The aeroshell of the Mars Science Laboratory and Mars 2020 entry vehicles is proposed as a baseline for this system to reduce the amount of necessary technology development. Direct Simulation Monte Carlo and Navier-Stokes computational fluid dynamics solutions are used to characterize the aerodynamic performance of the Mars-heritage vehicle for aerocapture flight at Uranus. These results are incorporated into an aerodatabase for use in six degree-of-freedom trajectory studies and mission design. Updates are made to the Mars-heritage aerodynamic uncertainty model based on observations in the Uranus-specific computational data to ensure the model is conservatively bounding for the proposed flight space. Necessary modifications to the aeroshell for system packaging are found to have minimal effect on aerodynamic performance. The resulting aerodatabase and uncertainty model are used to show the existing Mars-heritage entry vehicles have sufficient aerodynamic performance to achieve required control margin for Uranus aerocapture.
Aerodynamic characteristics of an aerocapture system intended to deliver a flagship-class orbiter and probe planetary science mission to Uranus are presented. The aeroshell of the Mars Science Laboratory and Mars 2020 entry vehicles is proposed as a baseline for this system to reduce the amount of necessary technology development. Direct Simulation Monte Carlo and Navier-Stokes computational fluid dynamics solutions are used to characterize the aerodynamic performance of the Mars-heritage vehicle for aerocapture flight at Uranus. These results are incorporated into an aerodatabase for use in six degree-of-freedom trajectory studies and mission design. Updates are made to the Mars-heritage aerodynamic uncertainty model based on observations in the Uranus-specific computational data to ensure the model is conservatively bounding for the proposed flight space. Necessary modifications to the aeroshell for system packaging are found to have minimal effect on aerodynamic performance. The resulting aerodatabase and uncertainty model are used to show the existing Mars-heritage entry vehicles have sufficient aerodynamic performance to achieve required control margin for Uranus aerocapture.
BACKGROUND As NASA’s mission programs begin to shift from Low Earth Orbit (LEO) to planetary mission profiles, the importance of understanding the phenomena a human experience when returning from spaceflight is of increased importance. The purpose of this study was to assess trends across individuals in the symptoms experienced during the landing process of long duration ISS missions. METHODS Data for this study is an aggregation of mission level data from forms used by crew surgeons at R+0, electronic medical records, notes from weekly Space Medicine Operation Team meetings, records in the Shuttle Mission Data Archive, and data collected by research teams in the Human Research Program (HRP). Aggregated data was used in descriptive analysis of the trends in medical events and countermeasure use. The data was also used to identify high value targets for emphasis in on going surveillance efforts. RESULTS Completeness of reporting varied greatly over time and across missions dependent on information sources available for data extraction. Landing forms provided the most complete data but still missed or left unconfirmed, several, common symptoms, and countermeasures. Data aggregation did show to cover gaps within individual data sources. Commonly reported symptoms included nystagmus, vertigo, and nausea. Common protocols for fluid loading and meclizine are reflected within the data set. DISCUSSION The data set generated in this project provides a foundation that show how symptoms of astronauts as they return to Earth varies across the long duration ISS missions. While there is an abundance of information provided within the data set, there are still inconsistencies in reporting especially in the absence of the landing day form. Further data collection practices should be standardized to ease the burden on crew surgeons during R+0 exams and better collect high value variables.
After nearly 16 years in low Earth orbit (LEO), the Wide Field Planetary Camera-2 (WFPC2) was recovered from the Hubble Space Telescope (HST) in May 2009, during the 12 day shuttle mission designated STS-125. The WFPC-2 radiator had been struck by approximately 700 impactors producing crater features 300 microns and larger in size. Following optical inspection in 2009, agreement was reached for joint NASA-ESA study of crater residues, in 2011. Over 480 impact features were extracted at NASA Johnson Space Center's (JSC) Space Exposed Hardware clean-room and curation facility during 2012, and were shared between NASA and ESA. We describe analyses conducted using scanning electron microscopy (SEM) - energy dispersive X-ray spectrometry (EDX): by NASA at JSC's Astromaterials Research and Exploration Science (ARES) Division; and for ESA at the Natural History Museum (NHM), with Ion beam analysis (IBA) using a scanned proton microbeam at the University of Surrey Ion Beam Centre (IBC).