Search NASA⌕ Search

SEARCH · Search NASA

Results for “property predictions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Impact of Pressure-Dependent Interfacial Tension and Contact Angle on Capillary Heterogeneity Trapping of CO2 in Storage Aquifers

Summary Carbon dioxide (CO2) capillary trapping increases the total amount of CO2 that can be effectively immobilized in storage aquifers. This trapping, manifesting itself as accumulated CO2 columns at a continuum scale, is because of capillary threshold effects that occur below low-permeability barriers. Considering that capillary pressure is dictated by heterogeneous pore throat size, the trapped CO2 column height and associated CO2 saturation will vary spatially within a storage aquifer. This variation will be influenced by two pressure-dependent interfacial parameters—CO2/brine interfacial tension (IFT) and CO2/brine/rock contact angle. Our objective is to understand how the pressure dependence of these two parameters affects the heterogeneity of capillary trapped CO2 at a continuum scale. Our conceptual model is a 1D two-zone system with the upper zone being a flow barrier (low permeability) and the lower zone being a flow path (high permeability). The inputs to this model include microfacies-dependent capillary pressure vs. saturation curves and permeability values. The input capillary pressure curves were collected in the literature that represents carbonate microfacies (e.g., dolograinstone) in a prevalent formation in the Permian Basin. We then used the Leverett j-function to scale the capillary pressure curve for the two zones that are assigned with the same or different microfacies. During scaling, we considered the influence of pressure on both the IFT and contact angle of CO2/brine/dolomite systems. We varied the zone permeability contrast ratio from 2 to 50. We then assumed capillary gravity equilibriums and calculated the CO2 saturation buildup corresponding to various trapped CO2 column heights. The CO2 saturation buildup is defined as the CO2 saturation in the lower layer minus that in the upper one. We found that the saturation buildup can be doubled when varying pressure in a storage aquifer, after considering pressure-dependent IFT and contact angles. Thus, assuming these two parameters to be constant across such aquifers would cause large errors in the quantification of capillary trapping of CO2. The whole study demonstrates the importance of considering pressure-dependent interfacial properties in predicting the vertical distribution of capillary trapped CO2. It has important implications in developing a better understanding of leakage risks and consequent storage safety.

Engineering↗
DOE OSTI2022

Excited State Phenomena in Correlated Nanostructures: Transition Metal Oxide Clusters and Nanocrystals

The primary goal of our research program was to apply advanced computational techniques to predict electronic properties of molecular species. These include transition metal monoxide and dioxide clusters and negatively charged copper oxide clusters which are important systems for their utilization in a variety of technological applications. The enhanced electron-electron interactions inherent in these systems make it challenging to model their excited state properties within a parameter-free approach. The excited state properties in question include the interaction of light with these molecules which results in ejection of electrons from the system, or the absorption of light by the molecular system resulting in a molecule in a higher-energy state. Our overall goal was to investigate the impact of various computational and theoretical approaches on such electronic and optical excitations in these systems. Comparing several variants of theoretical approaches with available experimental data, and high-level quantum chemistry computations helped us identify the level of theory and approximations that are needed to achieve a reasonable balance between accuracy and computational demand.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Nanoparticle Mediated Delivery of Therapeutic mRNA for Protection Against Lung Damage

Medical countermeasures (MCMs) based on messenger ribonucleic acid (mRNA) are promising due to their programmability, targeting precision and specificity, predictable physicochemical properties, and amenability to scalable manufacture. However, safe and effective delivery vehicles are needed, especially for targeting the lung. We developed a generalized approach to nanoparticle-mediated mRNA delivery to lung, and used it to evaluate candidate therapies. In initial studies, reporter mRNA was delivered using lipid-coated mesoporous silica nanoparticles (LC-MSNs) and lipid nanoparticles (LNPs), the latter with greater consistency. Then, mRNA encoding known protein therapies were delivered using LNPs. These formulations showed some toxicity in mice with lung damage, but those with IL-1RA, sACE2-Ig, and ANGPT1 mRNA were modestly therapeutic on balance. Our work advances the state of the art for mRNA delivery to lung, and provides a foundation for evaluating and characterizing mRNA-based lung therapies, including three that appear to be exceptionally promising.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Multiscale simulations of novel lithium electrolytes for improved processability and performance of solid-state batteries

In FY23, we performed atomic-scale simulations and developed analysis tools to understand the dynamic behaviors of Li ions and cation/anion components and predict mechanical properties in a new class of Li-ion solid electrolytes (SEs) developed by TRINA. Specifically, we revealed the transport characteristics of Li ions in anion sublattice, rotational dynamics of anion and cation components, and the effect of cation and anion on Li transport as well as interactions between cation and anions. The results imply that the transport characteristics in these soft materials may be affected by processing conditions significantly, which will offer the necessary insights to optimize these future SEs and accelerate the deployment of practical and easily processable Solid-state batteries (SSBs).

25 ENERGY STORAGE↗
DOE OSTI2024

Q4Q: Quantum Computation for Quantum Prediction of Materials and Molecular Properties

We aim at exploring the potential of quantum computation to solve practical problems that are currently targeted by “traditional” high performance computing (HPC). Along the way, we will develop theoretical frameworks and algorithmic strategies. We propose computational research activities that will advance the application of quantum computers to selected materials/molecular properties: (1) Band structure of solids; (2) Molecular electronic/vibronic properties; (3) Free energies and phase transitions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Developing And Scaling an OpenFOAM Model to Study Turbulent Flow in a HFIR Coolant Channel

Improving the understanding of how computational fluid dynamics (CFD) direct numerical simulations (DNS) of flows in the High Flux Isotope Reactor (HFIR) perform when run in parallel using the high performance computing (HPC) platform Summit at the Oak Ridge Leadership Computing Facility (OLCF) is of particular importance to boost the computational tools used to support HFIR conversion to low enriched fuel (LEU). Evaluation of scaling performance was driven by the increasing importance of graphics processing unit (GPU) usage in HPC, which is becoming the standard for modern supercomputers such as Summit. The desired results are to obtain a strong positive correlation between the computational resources dedicated to a problem and the relative speed-up of the simulation in comparison to a benchmark. This capability will allow substantially improvement in HFIR flow analytical capabilities, specifically when predicting turbulence properties at high Reynolds numbers. The study leverages previous simulation results performed with code PHASTA (finite element) on HPC platforms Cori (NERSC) and Theta (ALCF) [1] with computing options provided in the computing platform OpenFOAM (finite volume) at OLCF. Transitioning from PHASTA to OpenFOAM will (1) eliminate dependence on third-party software for mesh generation and manipulation, (2) reduce resource needs by employing modern architectures, and (3) build expertise for future modeling of HFIR-specific problems like heat transfer in involute geometry, entrance effects, flow structure in channel corners, and so on—all important issues when defining the available thermal margins in the transition to LEU. CPUs and GPUs differ significantly in their architecture and utilization, as discussed in the literature [2]. The most important differences are in the approach to computations and their memory. A single GPU contains a large quantity of cores, enabling it to perform with a much higher throughput than a CPU, but execution requires a different approach. GPU codes execute instructions using the Single-Instruction Multiple-Thread (SIMT) approach in which a single instruction is used for groups of threads called warps. A warp typically consists of 32 threads which must execute the same set of instructions, although on separate threads. Alternately, a CPU has far fewer cores that are much more flexible in their operation, excelling at quickly performing more complex serial computations. This is why GPUs have greater throughput when properly utilized. The second important difference is seen when comparing their memory spaces. Limited memory allocations and CPU–GPU communications cause a significant bottleneck in GPU-accelerated programs. Further study was required to properly take advantage of GPU resources. A comprehensive analysis of code performance and the model-specific features of turbulence constitutes the core of this work. In this study, a DNS simulation of HFIR channel turbulence was performed with the finite volume CFD code OpenFOAM v2112 and CUDA v11.0 on Red Hat Enterprise Linux v8.2. The OpenFOAM installation had AMGx integrated to enable GPU acceleration and utilizes the PETSc4FOAM library. The computational resources and the problem size were scaled on CPU and CPU + GPU architectures to gain a better understanding of the performance of a DNS problem on modern computing hardware. The study aimed to analyze the scaling of the code exclusively on CPUs and then to examine the scaling of the codes with GPU acceleration enabled. Scaling studies included CPU and GPU acceleration on a mesh of varying resolution to analyze the impact of problem size relative to computational resources. In the course of preparing the GPU configuration on Summit, mainly using the AMGX solvers, difficulties were encountered stemming from constant changes resulting from extensive ongoing development activities and the changing environment. This resulted in the inability to complete the GPU portion of the work. The code was compiled and tested, but production runs to assess acceleration were not performed because the used discretional compute time allocation expired as year-end approached. The Summit HPC platform is scheduled for decommissioning in 2024, making it unattractive for future use with Nvidia-based GPUs. Therefore, the work will be moved onto NERSC machines in FY24. An application was prepared and submitted, and sufficient node-hours were awarded to continue the research in the next calendar year. This report summarizes work performed thus far, which mostly focused on CPU OpenFOAM computing.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2022

End-to-end optimization for battery materials and molecules by combining graph neural networks and reinforcement learning

The National Renewable Energy Laboratory (NREL), together with the Colorado School of Mines (CSM) and Colorado State University (CSU), has developed a machine learning-enhanced approach to design new battery materials. Currently, such materials are designed in part via numerous expensive high-fidelity computational simulations that predict the performance of a given composition. Even with computational screening tools, the vast landscape of possible molecular or crystal structures exceeds current and future computational capacity. Improving the efficiency by which new materials can be optimized will therefore disrupt the cost, risk, and time required to bring new energy solutions to the marketplace. Predicting the properties of an organic molecule or periodic crystalline material given its structure has grown increasingly common. These approaches leverage large-scale computational and experimental databases and ML approaches such as graph neural networks. The inverse design problem of finding a material that possesses desired properties is substantially more challenging, since enumerating all valid material structures is not feasible. In this project, we leveraged recent success in reinforcement learning to efficiently navigate this high-dimensional search space. Just as algorithms can find the optimal chess moves from nearly limitless options, we train an approach to evolve a simple starting structure into a complex structure that possess the desired properties. Our solution has been demonstrated by applying it to two related design application tasks for short- and long-term energy storage, respectively: (1) the design of solid-state ion conductors and (2) the design of organic redox-active materials. The project has resulted an open-source software library for material design, documented examples of applying the library to both organic and inorganic material optimization, and peer-reviewed publications detailing the data, computational models, and resulting candidate materials.

25 ENERGY STORAGE↗
DOE OSTI2024

Status Report on Characterization of High Burnup Fuel with Advanced Nondestructive Pulsed Neutron PIE

Characterizing irradiated or spent nuclear fuels with pulsed neutron techniques provides microstructural data such as phase fractions as well as crystallographic data, e.g. lattice parameters, from diffraction analysis. Diffraction characterization is complemented by spatially resolved mapping of isotope densities from energy-resolved neutron imaging, in particular neutron absorption resonance imaging, and overall bulk isotope assay with better sensitivity for minority isotopes from neutron absorption resonance spectroscopy without spatial resolution. Furthermore, after characterization at ambient condition, heating of irradiated or spent fuel will allow to characterize differences of e.g. lattice thermal expansion or phase transition temperature and kinetics compared to fresh fuel as well as enable the study of disappearance of irradiation defects. This data enables benchmarking of predictions of properties of irradiated fuels for which otherwise experimental data is sparse. The effort described here strives to characterize a section cut from a high-burnup fuel. Volumes smaller than entire fuel pellets or rodlets as proposed here, e.g. sections cut from a fuel pellet, to pave the way to characterize entire pellets or rodlets in the future.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Developments in Physics-Based Modeling and Machine Learning for Environmental Effects in Nuclear Materials [Slides]

This presentation is part of an annual review for the new Advanced Materials and Manufacturing Technologies program under the Office of Nuclear Energy within the Department of Energy. This presentation covers advances in physics-based modeling and machine learning for environmental effects in nuclear materials. It discusses efforts in combining density functional theory with machine learning to predict material properties, studying irradiation defect recombination, and improving MOOSE-based tools for crystal plasticity modeling and the Stochastic Tools Module.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

End-to-End Optimization for Battery Materials and Molecules by Combining Graph Neural Networks and Reinforcement Learning

The National Renewable Energy Laboratory (NREL), together with the Colorado School of Mines (CSM) and Colorado State University (CSU), has developed a machine learning-enhanced approach to the design of new battery materials. Currently, such materials are designed in part via numerous expensive high-fidelity computational simulations that predict the performance of a given composition. Even with computational screening tools, the vast landscape of possible molecular or crystal structures exceeds current and future computational capacity. Improving the efficiency by which new materials can be optimized will therefore disrupt the cost, risk, and time required to bring new energy solutions to the marketplace. Predicting the properties of an organic molecule or periodic crystalline material given its structure has grown increasingly common. These approaches leverage large-scale computational and experimental databases and ML approaches such as graph neural networks. The inverse design problem of finding a material that possesses desired properties is substantially more challenging, since enumerating all valid material structures is not feasible. In this project, we leveraged recent success in reinforcement learning to efficiently navigate this high-dimensional search space. Just as algorithms can find the optimal chess moves from nearly limitless options, we train an approach to evolve a simple starting structure into a complex structure that possess the desired properties. Our solution has been demonstrated by applying it to two related design application tasks for short- and long-term energy storage, respectively: (1) the design of solid-state ion conductors and (2) the design of organic redox-active materials. The project has resulted an open-source software library for material design, documented examples of applying the library to both organic and inorganic material optimization, and peer-reviewed publications detailing the data, computational models, and resulting candidate materials.

25 ENERGY STORAGE↗
DOE OSTI2025

Acceleration of Thermochemistry Solves in MOOSE and Pronghorn

This work focuses on the development and implementation of strategies to accelerate thermochemical calculations within MOOSE-based multiphysics simulations, particularly for applications in MSRs. We highlight the inherent complexity of nuclear materials, which require a multiscale approach to accurately model their behavior across various physical domains, including mechanical, chemical, and thermal phenomena. Thermochemical equilibrium calculations are crucial for predicting material properties and enhancing the fidelity of these simulations. The integration of Thermochimica, a Gibbs energy minimizer, into MOOSE allows for the direct minimization of Gibbs energy at every point on the mesh. However, the computational cost of such integration is significant. To address this, we explored acceleration strategies such as multi-threading support and the use of a thermodynamic ValueCache to reduce redundant calculations. Additionally, we investigated modifications to Thermochimica to enable phase constraints and improve its coupling with phase-field models, which are essential for simulating microstructural evolution and corrosion in MSR. These efforts aim to optimize the computational efficiency and accuracy of multiphysics simulations, thereby supporting the development of reliable and efficient nuclear materials for next-generation reactor technologies.

36 - MATERIALS SCIENCE↗
DOE OSTI2020

Investigation of Mixing Law Efficacy for Gaseous Hydrodynamic Simulations

A computational simulation of various mixing laws for gaseous equations of state using planar traveling shocks for multiple mixtures in three dimensions is analyzed against nominal experimental data. Numerical simulations utilize the Sandia National Laboratories shock hydrodynamic code CTH and other codes including the thermochemical equilibrium code TIGER and the uncertainty qualification and sensitivity analysis code DAKOTA. The mixtures are a 1:1 and a 1:3 molar mixture of helium and sulfur hexafluoride. The mixing laws to be analyzed are the ideal gas law, Amagat's Law, Dalton's Law, the BKW EOS, the EXP6 EOS, and the JCZ3 EOS. Examination of the experimental data with TIGER revealed that the shock strength should not be strong enough to turn the mixture non-ideal as the compressibility factor z was essentially unity (z ≈ 1.02). Experimental results show that none of the equations of state are able to accurately predict the properties of the shocked mixture; similar discrepancies have been observed in previous works. Kinetic molecular theory appears to introduce a parameter which offers an explanation regarding the discrepancies. Implementation of the KMT pararneter into the EOS is left for future work.

42 ENGINEERING↗
DOE OSTI2021

Artificial Intelligence for Autonomous Molecular Design: A Perspective

Domain-aware artificial intelligence has been increasingly adopted in recent years to expedite molecular design in various applications, including drug design and discovery. Recent advances in areas such as physics-informed machine learning and reasoning, software engineering, high-end hardware development, and computing infrastructures are providing opportunities to build scalable and explainable AI molecular discovery systems. This could improve a design hypothesis through feedback analysis, data integration that can provide a basis for the introduction of end-to-end automation for compound discovery and optimization, and enable more intelligent searches of chemical space. Several state-of-the-art ML architectures are predominantly and independently used for predicting the properties of small molecules, their high throughput synthesis, and screening, iteratively identifying and optimizing lead therapeutic candidates. However, such deep learning and ML approaches also raise considerable conceptual, technical, scalability, and end-to-end error quantification challenges, as well as skepticism about the current AI hype to build automated tools. To this end, synergistically and intelligently using these individual components along with robust quantum physics-based molecular representation and data generation tools in a closed-loop holds enormous promise for accelerated therapeutic design to critically analyze the opportunities and challenges for their more widespread application. This article aims to identify the most recent technology and breakthrough achieved by each of the components and discusses how such autonomous AI and ML workflows can be integrated to radically accelerate the protein target or disease model-based probe design that can be iteratively validated experimentally. Taken together, this could significantly reduce the timeline for end-to-end therapeutic discovery and optimization upon the arrival of any novel zoonotic transmission event. Our article serves as a guide for medicinal, computational chemistry and biology, analytical chemistry, and the ML community to practice autonomous molecular design in precision medicine and drug discovery.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Disentangling the AGN and Star formation Contributions to the Radio–X-Ray Emission of Radio-loud Quasars at 1 < Z < 2

We constrain the emission mechanisms responsible for the prodigious electromagnetic output generated by active galactic nuclei (AGNs) and their host galaxies with a novel state-of-the-art AGN radio-to-X-ray spectral energy distribution model fitting code (ARXSED). ARXSED combines multiple components to fit the spectral energy distributions (SEDs) of AGNs and their host galaxies. Emission components include radio structures such as lobes and jets, infrared emission from the AGN torus, visible-to-X-ray emission from the accretion disk, and radio-to-ultraviolet emission from the host galaxy. Applying ARXSED to the radio SEDs of 20 3CRR quasars at 1 < z < 2 verifies the need for more than a simple power law when compact radio structures are present. The nonthermal emission contributes 91%–57% of the observed-frame 1.25 mm to 850 μm flux, and this component must be accounted for when using these wavelengths to estimate star formation properties. We predict the presence of strong radio-linked X-ray emission in more than half the sample sources. ARXSED estimates median (and the associated first and third quartile ranges) BH mass of ${2.9}_{1.7}^{6.0}\times {10}^{9}\,{M}_{\odot }$ , logarithm of Eddington ratio of $-{1.0}_{-1.2}^{-0.6}$ , and spin of ${0.98}_{0.94}^{0.99}$ for our sample. The inferred AGN torus and accretion disk parameters agree with those estimated from spectroscopic analyses of similar samples in the literature. We present the median intrinsic SED of the luminous radio-loud quasars at 1 < z ≲ 2; this SED represents a significant improvement in the way each component is modeled.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Global Framework for Emulation of Nuclear Calculations

We introduce a hierarchical framework that combines ab initio many-body calculations with a Bayesian neural network, developing emulators capable of accurately predicting nuclear properties across isotopic chains simultaneously and being applicable to different regions of the nuclear chart. We benchmark our developments using the oxygen isotopic chain, achieving accurate results for ground-state energies and nuclear charge radii, while providing robust uncertainty quantification. Our framework enables global sensitivity analysis of nuclear binding energies and charge radii with respect to the low-energy constants that describe the nuclear force.

FOS: Computer and information sciences↗
DOE OSTI2020

Gasification and Techno-Economic Analysis of High-Impact Biomass Feedstocks for the Synthesis of High-Octane Gasoline

Five economically advantaged biomass feedstocks identified in the US Department of Energy's 2016 Billion Ton Study were gasified and the syngas reformed at the bench scale to study the feedstock price-performance relationship. The distribution of reformed syngas compositions, heating values, and yields were similar across the different feedstocks and blends thereof, which ranged from inexpensive residual wastes to more expensive and higher quality biomass, revealing that feedstock performance was mostly insensitive to its price. Custom blended feedstocks produced syngas with characteristics resembling linear combinations of syngas from single-component feedstocks, supporting the ability to customize and predict blended properties based on single-feedstock data. A techno-economic analysis of specific feedstock costs for producing high-octane gasoline showed that miscanthus and forest residues were the most cost-effective with gas yields consistent with experimental gasification data. A field-to-wheels life-cycle assessment of greenhouse gas emissions showed that forest residues was the most environmentally benign feedstock of those studied.

09 BIOMASS FUELS↗
DOE OSTI2020

Experimental, Economic, and Environmental Assessment of Feedstock Gasification for High-Octane Fuel Production

Five economically advantaged biomass feedstocks identified in the US Department of Energy's 2016 Billion Ton Study were gasified and the syngas reformed at the bench scale to study the feedstock price-performance relationship. The distribution of reformed syngas compositions, heating values, and yields were similar across the different feedstocks and blends thereof, which ranged from inexpensive residual wastes to more expensive and higher quality biomass, revealing that feedstock performance was mostly insensitive to its price. Custom blended feedstocks produced syngas with characteristics resembling linear combinations of syngas from single-component feedstocks, supporting the ability to customize and predict blended properties based on single-feedstock data. A techno-economic analysis of specific feedstock costs for producing high-octane gasoline showed that miscanthus and forest residues were the most cost-effective. A field-to-wheels life-cycle assessment of greenhouse gas emissions showed that forest residues was the most environmentally benign feedstock of those studied.

09 BIOMASS FUELS↗