Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantum dot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Controlling the influence of Auger recombination on the performance of quantum-dot light-emitting diodes

Development of light-emitting diodes (LEDs) based on colloidal quantum dots is driven by attractive properties of these fluorophores such as spectrally narrow, tunable emission and facile processibility via solution-based methods. A current obstacle towards improved LED performance is an incomplete understanding of the roles of extrinsic factors, such as nonradiative recombination at surface defects, versus intrinsic processes, such as multicarrier Auger recombination or electron-hole separation due to applied electric field. Here we address this problem with studies that correlate the excited state dynamics of structurally engineered quantum dots with their emissive performance within LEDs. We find that because of significant charging of quantum dots with extra electrons, Auger recombination greatly impacts both LED efficiency and the onset of efficiency roll-off at high currents. Further, we demonstrate two specific approaches for mitigating this problem using heterostructured quantum dots, either by suppressing Auger decay through the introduction of an intermediate alloyed layer, or by using an additional shell that impedes electron transfer into the quantum dot to help balance electron and hole injection.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of CdSe quantum dots dispersed in PVA matrix by chemical route

CdSe quantum dots using polyvinyl alcohol as a capping agent have been synthesized via a simple heat induced thermolysis technique. The structural analysis of CdSe/PVA thin film was studied by X-ray diffraction, which confirms crystalline nature of the prepared film. The surface morphology and particle size of the prepared sample was studied by Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). The SEM studies of CdSe/PVA thin film shows the average size of particles in the form of clusters of several quantum dots in the range of 10-20 nm. The morphology of CdSe/PVA thin film was further examined by TEM. The TEM image shows the fringes of tiny dots with average sizes of 4-7 nm. The optical properties of CdSe/PVA thin film were studied by UV-VIS absorption spectroscopy. The CdSe/PVA quantum dots follow the role of direct transition and the optical band gap is found to be 4.03 eV. From dc conductivity measurement, the observed value of activation energy was found to be 0.71 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stimulated emission from optically pumped quantum dots

Stimulated emission from optically pumped quantum dot arrays has been studied experimentally at room temperature. We have demonstrated stimulated emission on interband transitions from the ground level in a quantum well ({lambda} {approx} 1.31 {mu}m) and from two excited states ({lambda} {approx} 1.21 and 1.12 {mu}m). The gain coefficient of the transitions has been evaluated using exposed strips of variable length. The gain coefficients thus obtained are rather large, up to 15-17 cm{sup -1} (at {lambda} {approx} 1.31 {mu}m). A procedure is discussed for measuring large gain coefficients (above 10 cm{sup -1}) of active media. The stimulated emission from the excited states is found to be sharply suppressed with increasing strip length. (lasers)

74 ATOMIC AND MOLECULAR PHYSICS↗

Ab initio exact diagonalization simulation of the Nagaoka transition in quantum dots

Recent progress of quantum simulators provides insight into the fundamental problems of strongly correlated systems. To adequately assess the accuracy of these simulators, the precise modeling of the many-body physics, with accurate model parameters, is crucially important. In this paper, we employed an ab initio exact diagonalization framework to compute the correlated physics of a few electrons in artificial potentials. We apply this approach to a quantum-dot system and study the magnetism of the correlated electrons, obtaining good agreement with recent experimental measurements in a plaquette. Through control of dot potentials and separation, including geometric manipulation of tunneling, we examine the Nagaoka transition and determine the robustness of the ferromagnetic state. While the Nagaoka theorem considers only a single-band Hubbard model, in this work we perform extensive ab initio calculations that include realistic multiorbital conditions in which the level splitting is smaller than the interactions. In this work, this simulation complements the experiments and provides insight into the formation of ferromagnetism in correlated systems. More generally, our calculation sets the stage for further theoretical analysis of analog quantum simulators at a quantitative level.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Long-Wavelength Infrared (LWIR) Quantum Dot Infrared Photodetector (QDIP) Focal Plane Array

We have exploited the artificial atomlike properties of epitaxially self-assembled quantum dots for the development of high operating temperature long wavelength infrared (LWIR) focal plane arrays. Quantum dots are nanometer-scale islands that form spontaneously on a semiconductor substrate due to lattice mismatch. QDIPs are expected to outperform quantum well infrared detectors (QWIPs) and are expected to offer significant advantages over II-VI material based focal plane arrays. QDIPs are fabricated using robust wide bandgap III-V materials which are well suited to the production of highly uniform LWIR arrays. We have used molecular beam epitaxy (MBE) technology to grow multi-layer LWIR quantum dot structures based on the InAs/InGaAs/GaAs material system. JPL is building on its significant QWIP experience and is basically building a Dot-in-the-Well (DWELL) device design by embedding InAs quantum dots in a QWIP structure. This hybrid quantum dot/quantum well device offers additional control in wavelength tuning via control of dot-size and/or quantum well sizes. In addition the quantum wells can trap electrons and aide in ground state refilling. Recent measurements have shown a 10 times higher photoconductive gain than the typical QWIP device, which indirectly confirms the lower relaxation rate of excited electrons (photon bottleneck) in QDPs. Subsequent material and device improvements have demonstrated an absorption quantum efficiency (QE) of approx. 3%. Dot-in-the-well (DWELL) QDIPs were also experimentally shown to absorb both 45 deg. and normally incident light. Thus we have employed a reflection grating structure to further enhance the quantum efficiency. JPL has demonstrated wavelength control by progressively growing material and fabricating devices structures that have continuously increased in LWIR response. The most recent devices exhibit peak responsivity out to 8.1 microns. Peak detectivity of the 8.1 micrometer devices has reached approx. 1 x 10(exp 10) Jones at 77 K. Furthermore, we have fabricated the first long-wavelength 640x512 pixels QDP focal plane array. This QDIP focal plane may has produced excellent infrared imagery with noise equivalent temperature difference of 40 mK at 60K operating temperature. In addition, we have managed to increase the quantum efficiency of these devices from 0.1% (according to the data published in literature) to 20% in discrete devices. This is a factor of 200 increase in quantum efficiency. With these excellent results, for the first time QDIP performance has surpassed the QWIP performance. Our goal is to operate these long-wavelength detectors at much higher operating temperature than 77K which can be passively achieved in space. This will be a huge leap in high performance infrared detectors specifically applicable to space science instruments.

infrared imaging↗

Production and Targeting of Monovalent Quantum Dots

The multivalent nature of commercial quantum dots (QDs) and the difficulties associated with producing monovalent dots have limited their applications in biology, where clustering and the spatial organization of biomolecules is often the object of study. We describe here a protocol to produce monovalent quantum dots (mQDs) that can be accomplished in most biological research laboratories via a simple mixing of CdSe/ZnS core/shell QDs with phosphorothioate DNA (ptDNA) of defined length. After a single ptDNA strand has wrapped the QD, additional strands are excluded from the surface. Production of mQDs in this manner can be accomplished at small and large scale, with commercial reagents, and in minimal steps. These mQDs can be specifically directed to biological targets by hybridization to a complementary single stranded targeting DNA. We demonstrate the use of these mQDs as imaging probes by labeling SNAP-tagged Notch receptors on live mammalian cells, targeted by mQDs bearing a benzylguanine moiety.

59 BASIC BIOLOGICAL SCIENCES↗

Recovery of Active and Efficient Photocatalytic H 2 Production for CdSe Quantum Dots

Recently, colloidal semiconductor quantum dots (QDs) have shown great promise as photocatalysts for the production of chemical fuels by sunlight. Here, the efficiency of photocatalytic hydrogen (H 2 ) production for integrated systems of large diameter (4.4 nm) CdSe QDs as light harvesting nanoparticles with varying concentrations of nickel-dihydrolipoic acid (Ni-DHLA) small molecule catalysts was measured. While exhibiting excellent robustness and longevity, the efficiency of H 2 production for equimolar catalyst and QDs was relatively poor. However, the efficiency was found to increase substantially with increasing Ni-DHLA:QD molar ratios Surprisingly, this high activity was only observed with the use of 3-mercaptopropionic acid (MPA) ligands, while CdSe QDs capped with dihydrolipoic acid (DHLA) exhibited poor performance in comparison, indicating that the QD capping ligand has a substantial impact on the catalytic performance. Finally, ultrafast transient absorption spectroscopic measurements of the electron transfer (ET) dynamics show fast ET to the catalyst. Importantly, an increase in ET efficiency is observed as the catalyst concentration is increased. Together, these results suggest that for these large QDs, tailoring the QD surface environment for facile ET and increasing catalyst concentrations increases the probability of ET from QDs to Ni-DHLA, overcoming the relatively small driving force for ET and decreased surface electron density for large diameter QDs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heterogeneity in Local Chemical Bonding Explains Spectral Broadening in Quantum Dots with Cu Impurities

Quantum dots (QDs) with optically active Cu impurities have been proposed as heavy-metal-free alternatives to Cd and Pb chalcogenides. However, the origin of their unusual optical properties is not well understood. In particular, spectral broadening is an issue for their use in high-color-purity light-emitting diodes and reabsorption-free solar windows. In this paper, we show with density functional theory calculations that chemical bonding variations have a major effect on the optical properties of Cu-doped ZnSe QDs. The Cu–Se coordination sphere is highly covalent and therefore sensitive to local variations in electrostatics and bond geometry. Correspondingly, changes in the Cu impurity environment lead to large shifts in their ground-state energy, which causes spectral broadening when multiple Cu impurity bonding environments coexist as subensembles with distinct absorption and emission energies. We conclude that while electron–phonon coupling is stronger for these systems than for typical II–VI QDs, spectral broadening predominantly occurs because of the inhomogeneous spatial distribution of Cu impurities. This is in agreement with a study that has shown narrow (~60 meV) single-particle emission linewidths for Cu x In 2–x Se y S 2–y or “CIS” QDs, which also emit through Cu impurities. Therefore, we predict that narrow ensemble emission in photonic devices can be achieved if heterogeneity is controlled.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning the Dimensionality of Excitons in Colloidal Quantum Dot Molecules

Electrically coupled quantum dots (QDs) can support unique optoelectronic properties arising from the superposition of single-particle excited states. Experimental methods for integrating colloidal QDs within the same nano-object, however, have remained elusive to the rational design. Here, we demonstrate a chemical strategy that allows for the assembling of colloidal QDs into coupled composites, where proximal interactions give rise to unique optoelectronic behavior. The assembly method employing “adhesive” surfactants was used to fabricate both homogeneous (e.g., CdS–CdS, PbS–PbS, CdSe–CdSe) and heterogeneous (e.g., PbS–CdS, CdS–CdSe) nanoparticle assemblies, exhibiting quasi-one-dimensional exciton fine structure. In addition, tunable mixing of single-particle exciton states was achieved for dimer-like assemblies of CdSe/CdS core–shell nanocrystals. The nanoparticle assembly mechanism was explained within the viscoelastic interaction theory adapted for molten-surface colloids. Furthermore, we expect that the present work will provide the synthetic and theoretical foundation needed for building assemblies of many inorganic nanocrystals.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Diabatic error and propagation of Majorana zero modes in interacting quantum dots systems

Motivated by recent experimental progress in realizing Majorana zero modes (MZMs) using quantum dot systems, we investigate the diabatic errors associated with the movement of those MZMs. The movement is achieved by tuning time-dependent gate potentials applied to individual quantum dots, effectively creating a moving potential wall. To probe the optimized movement of MZMs, we calculate the experimentally accessible time-dependent fidelity and local density-of-states using many-body time-dependent numerical methods. Furthermore, our analysis reveals that an optimal potential wall height is crucial to preserve the well-localized nature of the MZM during its movement. Moreover, we analyze diabatic errors in realistic quantum-dot systems, incorporating the effects of repulsive Coulomb interactions and disorder in both hopping and pairing terms. Additionally, we provide a comparative study of diabatic errors arising from the simultaneous versus sequential tuning of multiple gates during the MZMs movement. Finally, we estimate the timescale required for MZM transfer in a six-quantum-dot system, demonstrating that MZM movement is feasible and can be completed well within the qubit's operational lifetime in practical quantum-dot setups.

Density of states↗

Quantum-dot-induced phase shift in a pillar microcavity

We perform high-resolution reflection spectroscopy of a quantum dot resonantly coupled to a pillar microcavity. We show the change in reflectivity as the quantum dot is tuned through the cavity resonance and measure the quantum-dot-induced phase shift using an ultrastable interferometer. The macroscopic phase shift we measure could be extended to the study of charged quantum dot pillar microcavity systems, where it could be exploited to realize a high-efficiency spin photon interface for hybrid quantum information schemes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Rashba coupling in three-electron-quantum dot under cylindrical symmetry: An exact solution

The application of quantum dots in advanced technology goes beyond doubt. Here, based on an analytical methodology, investigate a three-electron-quantum dot in the presence of Rashba spin-orbit interaction under cylindrical symmetry. Both eigenvalues and eigenfunctions of the system are reported and the problem is numerically discussed. - Graphical abstract: Display Omitted Highlights: > We theoretically investigate a three-electron-quantum dot in the presence of Rashba spin-orbit interaction by an exact analytical methodology. > By using the Jacobi transformations as well as the hyperspherical coordinates we calculate the wavefunction and the energy spectra. > Our obtained energy relation reveals that the Rashba interaction appears solely in the center of mass section.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Perovskite Quantum Dots. A New Absorber for Perovskite-Perovskite Tandem Solar Cells

The nanoscale properties of CsPbI 3 quantum dots allows for the advantageous manipulation of its phase diagram. We show that these all-inorganic halide perovskite nanocrystals can be used to fabricate colloidal perovskite quantum dot solar cells with low voltage losses. Despite only recently emerging on the photovoltaic scene, CsPbI 3 quantum dot solar cells have already achieved approximately 85% of their Shockley-Quessier limit open-circuit voltage, among the lowest voltage loss achieved for any material with a band gap of 1.7 eV, excepting III-V semiconductors. The low losses in these devices recently led to a world record certified quantum dot solar cell efficiency of 13.4%. While single junction thin film perovskite solar cells have surpassed 22% power conversion efficiency, perovskite-perovskite tandem solar cells offer the potential for power conversion efficiencies exceeding 30%. However, to accomplish this ambitious goal, perovskite solar cells must be designed with low losses and the appropriate band gaps, which differ from the ideal band gap for single junction perovskite solar cells. In this respect, the incredibly low voltage loss and tunable band gap of CsPbI 3 quantum dots make them ideally suited for all-perovskite tandem solar cell applications.

14 SOLAR ENERGY↗

Synthesis of cadmium telluride quantum wires and the similarity of their band gaps to those of equidiameter cadmium telluride quantum dots

High-quality colloidal CdTe quantum wires having purposefully controlled diameters in the range of 5-11 nm are grown by the solution-liquid-solid (SLS) method, using Bi-nanoparticle catalysts, cadmium octadecylphosphonate and trioctylphosphine telluride as precursors, and a TOPO solvent. The wires adopt the wurtzite structure, and grow along the [002] direction (parallel to the c axis). The size dependence of the band gaps in the wires are determined from the absorption spectra, and compared to the experimental results for high-quality CdTe quantum dots. In contrast to the predictions of an effective-mass approximation, particle-in-a-box model, and previous experimental results from CdSe and InP dot-wire comparisons, the band gaps of CdTe dots and wires of like diameter are found to be experimentally indistinguishable. The present results are analyzed using density functional theory under the local-density approximation by implementing a charge-patching method. The higher-level theoretical analysis finds the general existence of a threshold diameter, above which dot and wire band gaps converge. The origin and magnitude of this threshold diameter is discussed.

36 MATERIALS SCIENCE↗

Improved luminescence and thermal stability of semipolar (11-22) InGaN quantum dots

Semipolar (11-22)-oriented InGaN/GaN quantum dots (QDs) emitting in the 380-620 nm spectral range were synthesized by plasma-assisted molecular-beam epitaxy. The influence of the growth temperature on the properties of InGaN QDs has been investigated by photoluminescence and transmission electron microscopy. Growth temperatures low enough to prevent indium desorption provide a favorable environment to semipolar plane (11-22) to enhance the internal quantum efficiency of InGaN/GaN nanostructures.

36 MATERIALS SCIENCE↗

Metamorphic quantum dots: Quite different nanostructures

In this work, we present a study of InAs quantum dots deposited on InGaAs metamorphic buffers by molecular beam epitaxy. By comparing morphological, structural, and optical properties of such nanostructures with those of InAs/GaAs quantum dot ones, we were able to evidence characteristics that are typical of metamorphic InAs/InGaAs structures. The more relevant are: the cross-hatched InGaAs surface overgrown by dots, the change in critical coverages for island nucleation and ripening, the nucleation of new defects in the capping layers, and the redshift in the emission energy. The discussion on experimental results allowed us to conclude that metamorphic InAs/InGaAs quantum dots are rather different nanostructures, where attention must be put to some issues not present in InAs/GaAs structures, namely, buffer-related defects, surface morphology, different dislocation mobility, and stacking fault energies. On the other hand, we show that metamorphic quantum dot nanostructures can provide new possibilities of tailoring various properties, such as dot positioning and emission energy, that could be very useful for innovative dot-based devices.

36 MATERIALS SCIENCE↗

Nontrivial fusion of Majorana zero modes in interacting quantum-dot arrays

Motivated by recent experimental reports of Majorana zero modes (MZMs) in quantum-dot systems at the “sweet spot,” where the electronic hopping t ℎ is equal to the superconducting coupling Δ, we study the time-dependent spectroscopy corresponding to the nontrivial fusion of MZMs. The term “nontrivial” refers to the fusion of Majoranas from different original pairs of MZMs, each with well-defined parities. We employ an experimentally accessible time-dependent real-space local density-of-states (LDOS) method to investigate the nontrivial MZM fusion outcomes in canonical chains and in a Y-shaped array of interacting electrons. In the case of quantum-dot chains where two pairs of MZMs are initially disconnected, after fusion we find equal-height peaks in the electron and hole components of the LDOS, signaling nontrivial fusion into both the vacuum I and fermion Ψ channels with equal weight. For π-junction quantum-dot chains, where the superconducting phase has opposite signs on the left and right portions of the chain, after the nontrivial fusion we observed the formation of an exotic two-site MZM near the center of the chain, coexisting with another single-site MZM. Furthermore, we also studied the fusion of three MZMs in the Y-shaped geometry. In this case, after the fusion we observed the novel formation of another exotic multisite MZM, with properties depending on the connection and geometry of the central region of the Y-shaped quantum-dot array.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photoconductivity of Si/Ge multilayer structures with Ge quantum dots pseudomorphic to the Si matrix

Longitudinal photoconductivity spectra of Si/Ge multilayer structures with Ge quantum dots grown pseudomorphically to the Si matrix are studied. Lines of optical transitions between hole levels of quantum dots and Si electronic states are observed. This allowed us to construct a detailed energy-level diagram of electron-hole levels of the structure. It is shown that hole levels of pseudomorphic Ge quantum dots are well described by the simplest 'quantum box' model using actual sizes of Ge islands. The possibility of controlling the position of the long-wavelength photosensitivity edge by varying the growth parameters of Si/Ge structures with Ge quantum dots is determined.

36 MATERIALS SCIENCE↗