Search NASA⌕ Search

SEARCH · Search NASA

Results for “rectifiers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Rectification properties of n-type nanocrystalline diamond heterojunctions to p-type silicon carbide at high temperatures

Highly rectifying heterojunctions of n-type nanocrystalline diamond (NCD) films to p-type 4H-SiC substrates are fabricated to develop p-n junction diodes operable at high temperatures. In reverse bias condition, a potential barrier for holes at the interface prevents the injection of reverse leakage current from the NCD into the SiC and achieves the high rectification ratios of the order of 10{sup 7} at room temperature and 10{sup 4} even at 570 K. The mechanism of the forward current injection is described with the upward shift of the defect energy levels in the NCD to the conduction band of the SiC by forward biasing. The forward current shows different behavior from typical SiC Schottky diodes at high temperatures.

36 MATERIALS SCIENCE↗

Two-level system in spin baths: Non-adiabatic dynamics and heat transport

We study the non-adiabatic dynamics of a two-state subsystem in a bath of independent spins using the non-interacting blip approximation, and derive an exact analytic expression for the relevant memory kernel. We show that in the thermodynamic limit, when the subsystem-bath coupling is diluted (uniformly) over many (infinite) degrees of freedom, our expression reduces to known results, corresponding to the harmonic bath with an effective, temperature-dependent, spectral density function. We then proceed and study the heat current characteristics in the out-of-equilibrium spin-spin-bath model, with a two-state subsystem bridging two thermal spin-baths of different temperatures. We compare the behavior of this model to the case of a spin connecting boson baths, and demonstrate pronounced qualitative differences between the two models. Specifically, we focus on the development of the thermal diode effect, and show that the spin-spin-bath model cannot support it at weak (subsystem-bath) coupling, while in the intermediate-strong coupling regime its rectifying performance outplays the spin-boson model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, optical and electrical properties of CdS–polyaniline Langmuir–Blodgett films

Structural, optical and electrical properties study of the cadmium sulphide (CdS) incorporated polyaniline (PANI) thin films with varying layers have been carried out. It is seen that layer variation enhances the particle mean sizes with quenching of photoluminescence and an increase in rectifying nature of current-voltage measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced room temperature magnetoresistance in p−La{sub 0.7}Ca{sub 0.3}MnO{sub 3}/SrTiO{sub 3}/n−Si heterostructure: A possible spintronics application

An experimental study of p−La{sub 0.7}Ca{sub 0.3}MnO{sub 3}/SrTiO{sub 3}/n−Si heterostructure in which La{sub 0.7}Ca{sub 0.3}MnO{sub 3} (LCMO) and Si are separated by a thin interfacial SrTiO{sub 3} (STO) layer with typical thickness ∼ 15 nm, has been in situ fabricated with the pulsed laser deposition technique. The junction exhibits good rectifying diode like behavior over the temperature range of 10 - 300 K. The heterostructure also exhibits metal-oxide-semiconductor like behavior with all type of possible current flow mechanisms through the heterojunction. The junction magnetoresistance (JMR) (∼ 30% at 300 K) properties of p-LCMO/STO/n-Si heterostructure have been studied over the temperature range of 100-300 K. The JMR is positive and strongly depends on temperature at an applied forward bias voltage of 3 V. The relation between JMR and external magnetic field is found to be Δρ/ρ≈ α H{sup β} type, having both α and β temperature dependent. We attribute the emergence of positive JMR to the quantum mechanical tunneling transport mechanism across the heterojunction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase-field modeling of switchable diode-like current-voltage characteristics in ferroelectric BaTiO{sub 3}

A self-consistent model has been proposed to study the switchable current-voltage (I-V) characteristics in Cu/BaTiO{sub 3}/Cu sandwiched structure combining the phase-field model of ferroelectric domains and diffusion equations for ionic/electronic transport. The electrochemical transport equations and Ginzburg-Landau equations are solved using the Chebyshev collocation algorithm. We considered a single parallel plate capacitor configuration which consists of a single layer BaTiO{sub 3} containing a single tetragonal domain orientated normal to the plate electrodes (Cu) and is subject to a sweep of ac bias from −1.0 to 1.0 V at 25 °C. Our simulation clearly shows rectifying I-V response with rectification ratios amount to 10{sup 2}. The diode characteristics are switchable with an even larger rectification ratio after the polarization direction is flipped. The effects of interfacial polarization charge, dopant concentration, and dielectric constant on current responses were investigated. The switchable I-V behavior is attributed to the polarization bound charges that modulate the bulk conduction.

36 MATERIALS SCIENCE↗

A normal metal tunnel-junction heat diode

We propose a low-temperature thermal rectifier consisting of a chain of three tunnel-coupled normal metal electrodes. We show that a large heat rectification is achievable if the thermal symmetry of the structure is broken and the central island can release energy to the phonon bath. The performance of the device is theoretically analyzed and, under the appropriate conditions, temperature differences up to ∼200 mK between the forward and reverse thermal bias configurations are obtained below 1 K, corresponding to a rectification ratio R∼2000. The simplicity intrinsic to its design joined with the insensitivity to magnetic fields make our device potentially attractive as a fundamental building block in solid-state thermal nanocircuits and in general-purpose cryogenic electronic applications requiring energy management.

36 MATERIALS SCIENCE↗

Temperature effect on optical spectra of monolayer molybdenum disulfide

Recently, measured optical absorption and photoluminescence spectra reveal substantial frequency shifts of both exciton and trion peaks as monolayer molybdenum disulfide, MoS{sub 2}, is cooled from 363 K to 4 K. First-principles simulations using the GW-Bethe-Salpeter equation approach satisfactorily reproduce these frequency shifts by incorporating the thermal expansion effect. Studying these temperature effects in monolayer MoS{sub 2} is crucial for rectifying the results of available experiments with the previous predictions of zero-temperature-limit simulations. Moreover, our estimated thermal expansion coefficient of monolayer MoS{sub 2} is less than that of bulk counterpart by tracking the frequency shifts of the exciton peaks in optical spectra. This may serve as a convenient way to estimate thermal expansion coefficients of general two-dimensional chalcogenides.

36 MATERIALS SCIENCE↗

Impact of the GaN nanowire polarity on energy harvesting

We investigate the piezoelectric generation properties of GaN nanowires (NWs) by atomic force microscopy equipped with a Resiscope module for electrical measurements. By correlating the topography profile of the NWs with the recorded voltage peaks generated by these nanostructures in response to their deformation, we demonstrate the influence of their polarity on the rectifying behavior of the Schottky diode formed between the NWs and the electrode of measurement. These results establish that the piezo-generation mechanism crucially depends on the structural characteristics of the NWs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Facile synthesis, structural characterization, and photoluminescence mechanism of Dy{sup 3+} doped YVO{sub 4} and Ca{sup 2+} co-doped YVO{sub 4}:Dy{sup 3+} nano-lattices

Light plays a vital role in the evolution of life. From sunlight to candle-light and then to other form of lighting devices, human beings are utilizing light since time immemorial. Lighting devices such as conventional incandescent lamp and fluorescent lamp have been replaced by Light Emitting Diodes (LEDs) for the later is cheap, durable, etc. Now-a-days, phosphor converted LEDs have been burning issues in the fabrication of lighting devices. Especially, lanthanide ion(s) doped phosphors are of great interest for the same. However, doped phosphors have a limitation of luminescence quenching, i.e., instead of increasing luminescence on increasing dopant concentration, the luminescence decreases. Therefore, it must be rectified by one or other means so as to get maximum desirable intensity for uses in display or lighting devices. In the present work, YVO{sub 4}:Dy{sup 3+} and YVO{sub 4}:Dy{sup 3+}/Ca{sup 2+} nano-lattices are synthesized by a facile technique. Structural characterizations such as x-ray diffraction, SEM, TEM, HRTEM, and Selected Area Electron Diffraction (SAED) of the samples are reported. Photoluminescence (PL) excitation and emission, enhanced mechanism, and lifetime are thoroughly discussed. PL intensity of the quenched YVO{sub 4}:Dy{sup 3+} is made increased up to 432.63% by Ca{sup 2+} co-doping. Role of the Ca{sup 2+} on the luminescence enhanced mechanism of YVO{sub 4}:Dy{sup 3+}/Ca{sup 2+} is elucidated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin transport properties of partially edge-hydrogenated MoS{sub 2} nanoribbon heterostructure

We report ab initio calculations of electronic transport properties of heterostructure based on MoS{sub 2} nanoribbons. The heterostructure consists of edge hydrogen-passivated and non-passivated zigzag MoS{sub 2} nanoribbons (ZMoS{sub 2}NR-H/ZMoS{sub 2}NR). Our calculations show that the heterostructure has half-metallic behavior which is independent of the nanoribbon width. The opening of spin channels of the heterostructure depends on the matching of particular electronic orbitals in the Mo-dominated edges of ZMoS{sub 2}NR-H and ZMoS{sub 2}NR. Perfect spin filter effect appears at small bias voltages, and large negative differential resistance and rectifying effects are also observed in the heterostructure.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High performance TiN gate contact on AlGaN/GaN transistor using a mechanically strain induced P-doping

High performance titanium nitride sub-100 nm rectifying contact, deposited by sputtering on AlGaN/GaN high electron mobility transistors, shows a reverse leakage current as low as 38 pA/mm at V{sub GS} = −40 V and a Schottky barrier height of 0.95 eV. Based on structural characterization and 3D simulations, it is found that the polarization gradient induced by the gate metallization forms a P-type pseudo-doping region under the gate between the tensile surface and the compressively strained bulk AlGaN barrier layer. The strain induced by the gate metallization can compensate for the piezoelectric component. As a result, the gate contact can operate at temperatures as high as 700 °C and can withstand a large reverse bias of up to −100 V, which is interesting for high-performance transistors dedicated to power applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature dependent electrical transport studies of self-aligned ZnO nanorods/Si heterostructures deposited by sputtering

Self-aligned ZnO nanorods (NRs) were grown on n-Si(100) substrate by RF sputtering techniques. The NRs are uniformly grown on 2-inch wafer along [0001] direction. Single-crystalline wurtzite structure of ZnO NRs was confirmed by X-ray diffraction. The average diameter, height, and density of NRs are found 48 nm, 750 nm, and 1.26 × 10{sup 10} cm{sup −2}, respectively. The current-voltages (I-V) characteristics of ZnO NRs/Si heterojunction (HJ) were studied in the temperature range of 120–300 K and it shows a rectifying behavior. Barrier height (ϕ{sub B}) and ideality factor (η) were estimated from thermionic emission model and found to be highly temperature dependent in nature. Richardson constant (A{sup *}) was evaluated using Richardson plot of ln(I{sub o}/T{sup 2}) versus q/kT plot by linear fitting in two temperature range 120–180 K and 210–300 K. Large deviation in Richardson constant from its theoretical value of n-Si indicates the presence of barrier inhomogeneities at HJ. Double Gaussian distribution of barrier height with thermionic equation gives mean barrier heights of 0.55 ± 0.01 eV and 0.86 ± 0.02 eV for two different temperature regions 120–180 K and 210–300 K, respectively. Modified Richardson plot provided two values of Richardson constant for two temperature regions. However, for higher temperature range (210–300 K), the calculated value of Richardson constant ∼123 A cm{sup −2} K{sup −2} was close to the ideal Richardson constant for n-Si.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of the GaN-on-GaAs interface for vertical power device applications

GaN layers were grown onto (111) GaAs by molecular beam epitaxy. Minimal band offset between the conduction bands for GaN and GaAs materials has been suggested in the literature raising the possibility of using GaN-on-GaAs for vertical power device applications. I-V and C-V measurements of the GaN/GaAs heterostructures however yielded a rectifying junction, even when both sides of the junction were heavily doped with an n-type dopant. Transmission electron microscopy analysis further confirmed the challenge in creating a GaN/GaAs Ohmic interface by showing a large density of dislocations in the GaN layer and suggesting roughening of the GaN/GaAs interface due to etching of the GaAs by the nitrogen plasma, diffusion of nitrogen or melting of Ga into the GaAs substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improving metal/semiconductor conductivity using AlO{sub x} interlayers on n-type and p-type Si

Thermal atomic layer deposition was used to form ultra-thin interlayers in metal/interlayer/ semiconductor Ohmic contacts on n-type and p-type Si. AlO{sub x} of thickness 1–2 nm was deposited at 120 °C on Si substrates prior to metallization, forming Ni/AlO{sub x}/Si contacts. Conductivity improved by two orders of magnitude but the contacts remained rectifying. When they were annealed at 200 °C, the conductivity increased by another order of magnitude and the samples became Ohmic. A minimum specific contact resistivity of 1.5 × 10{sup −4} Ω-cm{sup 2} was obtained for structures based on lightly doped (10{sup 15 }cm{sup −3}) Si substrates. Existing models that describe Fermi level de-pinning do not fully explain our results, which are however consistent with other experimental data in the literature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Understanding and engineering of NiGe/Ge junction formed by phosphorus ion implantation after germanidation

Modulation of the effective electron Schottky barrier height (eSBH) of NiGe/Ge contacts induced by phosphorus ion implantation after germanide formation was investigated by considering local inhomogeneity in the eSBH. Systematic studies of NiGe/Ge contact devices having various germanide thicknesses and ion implantation areas indicated the threshold dopant concentration at the NiGe/Ge interface required for eSBH modulation and negligible dopant diffusion even at NiGe/Ge interface during drive-in annealing, leading to variation in the eSBH between the bottom and sidewall portions of the NiGe regions. Consequently, this method makes it possible to design source/drain contacts with low-resistivity Ohmic and ideal rectifying characteristics for future Ge-based transistors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

From Schottky to Ohmic graphene contacts to AlGaN/GaN heterostructures: Role of the AlGaN layer microstructure

The electrical behaviour of graphene (Gr) contacts to Al{sub x}Ga{sub 1−x}N/GaN heterostructures has been investigated, focusing, in particular, on the impact of the AlGaN microstructure on the current transport at Gr/AlGaN interface. Two Al{sub 0.25}Ga{sub 0.75}N/GaN heterostructures with very different quality in terms of surface roughness and defectivity, as evaluated by atomic force microscopy (AFM) and transmission electron microscopy, were compared in this study, i.e., a uniform and defect-free sample and a sample with a high density of typical V-defects, which locally cause a reduction of the AlGaN thickness. Nanoscale resolution current voltage (I-V) measurements by an Au coated conductive AFM tip were carried out at several positions both on the bare and Gr-coated AlGaN surfaces. Rectifying contacts were found onto both bare AlGaN surfaces, but with a more inhomogeneous and lower Schottky barrier height (Φ{sub B} ≈ 0.6 eV) for AlGaN with V-defects, with respect to the case of the uniform AlGaN (Φ{sub B} ≈ 0.9 eV). Instead, very different electrical behaviours were observed in the presence of the Gr interlayer between the Au tip and AlGaN, i.e., a Schottky contact with reduced barrier height (Φ{sub B} ≈ 0.4 eV) for the uniform AlGaN and an Ohmic contact for the AlGaN with V-defects. Interestingly, excellent lateral uniformity of the local I-V characteristics was found in both cases and can be ascribed to an averaging effect of the Gr electrode over the AlGaN interfacial inhomogeneities. Due to the locally reduced AlGaN layer thickness, V defect act as preferential current paths from Gr to the 2DEG and can account for the peculiar Ohmic behaviour of Gr contacts on defective AlGaN.

36 MATERIALS SCIENCE↗

High-performance zero-bias ultraviolet photodetector based on p-GaN/n-ZnO heterojunction

Lattice-match p-GaN and n-ZnO bilayers were heteroepitaxially grown on the c-sapphire substrate by metal organic chemical vapor deposition and molecular beam epitaxy technique, respectively. X-ray diffraction and photoluminescence investigations revealed the high crystal quality of the bilayer films. Subsequently, a p-GaN/n-ZnO heterojunction photodetector was fabricated. The p-n junction exhibited a clear rectifying I-V characteristic with a turn-on voltage of 3.7 V. At zero-bias voltage, the peak responsivity was 0.68 mA/W at 358 nm, which is one of the best performances reported for p-GaN/n-ZnO heterojunction detectors due to the excellent crystal quality of the bilayer films. These show that the high-performance p-GaN/n-ZnO heterojunction diode is potential for applications of portable UV detectors without driving power.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theoretical investigation of La monopnictides: Electronic properties and pressure-induced phase transition

The NaCl-type La monopnictides are proper reference materials for the study of strongly correlated rare-earth pnictides. Yet, despite the simple crystal structure of this system, traditional density functional theory (DFT) calculations have dramatic failures in describing their electronic properties: DFT severely underestimates the band gaps and thus predicts incorrect transport characters of them. Here, we perform a corrected DFT calculation to rectify this failure. Our results show that LaN, LaP, and LaAs are semiconductor with band gaps of 0.82, 0.25, and 0.12 eV, respectively, and LaSb is semimetallic with an overlap of conduction and valence bands approximately 0.28 eV, in agreement with the available experiments. Additionally, under high-pressure, we find that LaN displays a new sequence of phase-transition, B1 → anti-B10 → B2, which is different from the previous theoretical predictions but consistent with the recent experiment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗