SEARCH · Search NASA

Results for “scaling methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

All sources NASA NTRS DOE OSTI

NASA NTRS1992

CSM activities at the NASA Langley Research Center

The objective and goals of the Computational Structural Mechanics (CSM) Program as applied to airframe structures are given. It is recognized that the rapid evolution of computer hardware has opened up new opportunities for solving more complex and larger structural analysis problems than was hitherto imagined. To utilize these computers, new methods of computational structural mechanics are required. Methods are now being developed, assessed, and validated to meet the goals, and each of these goals is addressed. Plans and approaches are shown and highlights of results achieved in meeting these goals are given. Three research thrusts are shown in the five-year plan: advanced robust CSM methods, large-scale solutions, and validation/demonstration studies. The areas of research activity reflect the CSM goals. The mapping of developed methods onto high-performance and massively parallel computers is an integral part of the CSM five-year plan.

Housner, Jerrold M.↗

NASA NTRS1982

The reliability and validity of flight task workload ratings

Twelve instrument-rated general aviation pilots each flew two scenarios in a motion-base simulator. During each flight, the pilots verbally estimated their workload every three minutes. Following each flight, they again estimated workload for each flight segment and also rated their overall workload, perceived performance, and 13 specific factors on a bipolar scale. The results indicate that time (a priori, inflight, or postflight) of eliciting ratings, period to be covered by the ratings (a specific moment in time or a longer period), type of rating scale, and rating method (verbal, written, or other) may be important variables. Overall workload ratings appear to be predicted by different specific scales depending upon the situation, with activity level the best predictor. Perceived performance seems to bear little relationship to observer-rated performance when pilots rate their overall performance and an observer rates specific behaviors. Perceived workload and performance also seem unrelated.

Childress, M. E.↗

DOE OSTI2024

Equilibrium core modeling of a pebble bed reactor similar to the Xe-100 with SCALE

As the nuclear industry moves towards licensing and constructing advanced reactors, new attention has been focused on the advanced reactor designs that have past operational experience, such as pebble-bed high-temperature gas-cooled reactors (PB-HTGRs). Pebble-bed reactor designs have many advantages, such as their higher operating temperatures and online refueling capabilities. However, high-fidelity computational modeling of pebble-bed reactor designs, from reactor startup to operation at equilibrium, is more challenging compared to conventionally fueled reactors due to the continuous movement of the fuel pebbles through the reactor during operation. In previous work at Oak Ridge National Laboratory (ORNL), the SCALE Leap-In method for Cores at Equilibrium (SLICE) was developed around tools within the SCALE code system. This iterative method can effectively generate pebble-bed reactor zone-wise fuel inventories at equilibrium core operation within a reasonable computational time. The objective of this work was to further verify the ORNL SLICE method and to investigate the impact of considering temperature profiles during the application of the method. The SLICE method was applied to a modular high-temperature gas-cooled reactor design based upon publicly available design specifications of the Xe-100 pebble-bed reactor. Upon comparing the results from the SLICE method to published literature, the differences in the eigenvalue k effective were on the order of several hundred pcm (percent millirho). To investigate one possible cause of these differences, a study looking at the sensitivity of the full-core equilibrium k effective and discharge nuclide inventory to temperature was performed by developing equilibrium cores of two additional temperature profiles. From this temperature study, differences on the order of hundreds of pcm for the full-core equilibrium k effective , and up to 15% difference for the discharge inventories were found. In conclusion, these results indicated the strong dependence on temperature that needs to be considered for future work in equilibrium modeling of PB-HTGRs.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

NASA NTRS2004

Estimation of Time Scales in Unsteady Flows in a Turbomachinery Rig

Time scales in turbulent and transitional flow provide a link between experimental data and modeling, both in terms of physical content and for quantitative assessment. The problem of interest here is the definition of time scales in an unsteady flow. Using representative samples of data from GEAE low pressure turbine experiment in low speed research turbine facility with wake-induced transition, we document several methods to extract dominant frequencies, and compare the results. We show that conventional methods of time scale evaluation (based on autocorrelation functions and on Fourier spectra) and wavelet-based methods provide similar information when applied to stationary signals. We also show the greater flexibility of the wavelet-based methods when dealing with intermittent or strongly modulated data, as are encountered in transitioning boundary layers and in flows with unsteady forcing associated with wake passing. We define phase-averaged dominant frequencies that characterize the turbulence associated with freestream conditions and with the passing wakes downstream of a rotor. The relevance of these results for modeling is discussed in the paper.

Lewalle, Jacques↗

NASA NTRS2011

A Multiscale, Nonlinear, Modeling Framework Enabling the Design and Analysis of Composite Materials and Structures

A framework for the multiscale design and analysis of composite materials and structures is presented. The ImMAC software suite, developed at NASA Glenn Research Center, embeds efficient, nonlinear micromechanics capabilities within higher scale structural analysis methods such as finite element analysis. The result is an integrated, multiscale tool that relates global loading to the constituent scale, captures nonlinearities at this scale, and homogenizes local nonlinearities to predict their effects at the structural scale. Example applications of the multiscale framework are presented for the stochastic progressive failure of a SiC/Ti composite tensile specimen and the effects of microstructural variations on the nonlinear response of woven polymer matrix composites.

Bednarcyk, Brett A.↗

NASA NTRS2012

A Multiscale, Nonlinear, Modeling Framework Enabling the Design and Analysis of Composite Materials and Structures

Bednarcyk, Brett A.↗

NASA NTRS1989

Recovering the full velocity and density fields from large-scale redshift-distance samples

A new method for extracting the large-scale three-dimensional velocity and mass density fields from measurements of the radial peculiar velocities is presented. Galaxies are assumed to trace the velocity field rather than the mass. The key assumption made is that the Lagrangian velocity field has negligible vorticity, as might be expected from perturbations that grew by gravitational instability. By applying the method to cosmological N-body simulations, it is demonstrated that it accurately reconstructs the velocity field. This technique promises a direct determination of the mass density field and the initial conditions for the formation of large-scale structure from galaxy peculiar velocity surveys.

Bertschinger, Edmund↗

NASA NTRS2026

On-Demand Production of Hypergols: Steps Towards Scalability

During FY 2025, the team at KSC focused on taking the 2024 proof-of-concept demonstration of hypergol production using novel methods and began scaling up production and increasing purity. The team was able to more than triple the production of hydrazine using a novel method with a drastic increase in the purity. The current method, albeit still limited to production rates on the order of mg/hr, provides a cost savings of approximately 14x when compared to market value pricing through the Defense Logistics Agency (DLA) website. The benefit of this technology is the ability to produce some hypergolic fuels using constituents in Earth’s atmosphere, eliminating most chemical commodity logistics. This technology also allows for the return of domestic production of hypergolic propellant.

Kenneth Engeling↗

DOE OSTI2020

On decoupling the integrals of cosmological perturbation theory

ABSTRACT Perturbation theory (PT) is often used to model statistical observables capturing the translation and rotation-invariant information in cosmological density fields. PT produces higher order corrections by integration over linear statistics of the density fields weighted by kernels resulting from recursive solution of the fluid equations. These integrals quickly become high dimensional and naively require increasing computational resources the higher the order of the corrections. Here, we show how to decouple the integrands that often produce this issue, enabling PT corrections to be computed as a sum of products of independent 1D integrals. Our approach is related to a commonly used method for calculating multiloop Feynman integrals in quantum field theory, the Gegenbauer Polynomial x-Space Technique. We explicitly reduce the three terms entering the 2-loop power spectrum, formally requiring 9D integrations, to sums over successive 1D radial integrals. These 1D integrals can further be performed as convolutions, rendering the scaling of this method Nglog Ng with Ng the number of grid points used for each fast Fourier transform. This method should be highly enabling for upcoming large-scale structure redshift surveys where model predictions at an enormous number of cosmological parameter combinations will be required by Monte Carlo Markov Chain searches for the best-fitting values.

Slepian, Zachary↗

DOE OSTI2024

A methodology for selection of solid desiccants in energy recovery ventilators

Controlling indoor humidity levels is essential for maintaining acceptable indoor air quality in buildings. The use of energy recovery ventilators (ERVs) is an energy-efficient way to regulate indoor air humidity. Fixed-bed regenerators and rotary wheels are widely used ERVs because of their high sensible and latent effectiveness. These ERVs are made of desiccant-coated substrates, which enable them to transfer moisture between the supply and exhaust air streams. However, the moisture transfer ability of ERVs depends on the physiochemical and sorption properties of desiccants. Extensive, full-scale experiments are required to determine the best desiccant material for these systems. This paper presents a simplified method of selecting suitable desiccant materials for ERVs. The methodology involves important characterization methods, literature correlations for performance prediction, and cost-effective testing methods prior to full-scale testing, and full-scale test methods are discussed in detail. Furthermore, the performance of a few newly derived materials is evaluated and compared with that of conventional desiccants such as silica gel and molecular sieves. The highest latent effectiveness was obtained for composite of super absorbent polymer (SAP) with potassium formate (SAP-HCO2K-50 %), all-polymer porous solid desiccant (APPSD) and metal organic framework (MOF)–MIL–101 (Cr), followed by activated carbon fibre felt (ACFF) Silica sol-LiCl30, SAP, silica gel, MOF–303, and molecular sieve. Researchers and manufacturers would benefit from the proposed methodology and presented data in developing new desiccant materials for ERV applications.

Energy recovery↗

NASA NTRS1987

Determination of the scaled optical thickness of clouds from reflected solar radiation measurements

A method for determination of scaled optical thickness from reflected solar radiation measurements is described in which measurements of the reflected function are compared with asymptotic expressions for the reflection function of optically thick layers. Analytic formulas are derived which show the dependence of the reflection and transmission functions of nonabsorbing atmospheres on cloud optical thickness, ground albedo, and the asymmetry factor. An expression is derived which shows that the ground albedo produces a constant bias in the derived optical thickness, regardless of the value of the measured reflection function. Results from an analysis of high-resolution images, obtained in Oklahoma, of the reflection function of clouds shows the impact of details of the single scattering phase function on the derived optical thickness.

King, Michael D.↗

NASA NTRS2004

Bulk Comptonization of the Cosmic Microwave Background by Extragalactic Jets as a Probe of their Matter Content

We propose a method for estimating the composition, i.e. the relative amounts of leptons and protons, of extragalactic jets which exhibit Chandra - detected knots in their kpc scale jets. The method relies on measuring, or setting upper limits on, the component of the Cosmic Microwave Background (CMB) radiation that is bulk-Comptonized by the cold electrons in the relativistically flowing jet. These measurements, along with modeling of the broadband knot emission that constrain the bulk Lorentz factor GAMMA of the jets, can yield estimates of the jet power carried by protons and leptons. We provide an explicit calculation of the spectrum of the bulk-Comptonized (BC) CMB component and apply these results to PKS 0637 - 752 and 3C 273, two superluminal quasars with Chandra - detected large scale jets. What makes these sources particularly suited for such a procedure is the absence of significant non-thermal jet emission in the 'bridge', the region between the core and the first bright jet knot, which guarantees that most of the electrons are cold there, leaving the BC scattered CMB radiation as the only significant source of photons in this region. At lambda = 3.6 - 8.0 microns, the most likely band to observe the BC scattered CMB emission, the Spitzer angular resolution (approximately 1" - 3") is considerably smaller than the the 'bridges' of these jets (approximately 10"), making it possible to both measure and resolve this emission.

Georganopoulos, Markos↗

DOE OSTI2023

Unraveling H2 chemisorption and physisorption on metal decorated graphene using quantum Monte Carlo

Molecular hydrogen has the potential to significantly reduce the use of carbon dioxide emitting energy processes. However, hydrogen gas storage is a major bottleneck for its large-scale use as current storage methods are energy intensive. Among different storage methods, physisorbing molecular hydrogen at ambient pressure and temperatures is a promising alternative—particularly in light of the advancements in tunable lightweight nanomaterials and high throughput screening methods. Nonetheless, understanding hydrogen adsorption in well-defined nanomaterials remains experimentally challenging and reference information is scarce despite the proliferation of works predicting hydrogen adsorption. We focus on Li, Na, Ca, and K, decorated graphene sheets as substrates for molecular hydrogen adsorption, and compute the most accurate adsorption energies available to date using quantum diffusion Monte Carlo (DMC). Building on our previous insights at the density functional theory (DFT) level, we find that a weak covalent chemisorption of molecular hydrogen, known as Kubas interaction, is feasible on Ca decorated graphene according to DMC, in agreement with DFT. This finding is in contrast to previous DMC predictions of the 4H2/Ca+ gas cluster (without graphene) where chemisorption is not favored. However, we find that the adsorption energy of hydrogen on metal decorated graphene according to a widely used DFT method is not fully consistent with DMC. The reference adsorption energies reported herein can be used to find better work-horse methods for application in large-scale modeling of hydrogen adsorption. Furthermore, the implications of this work affect strategies for finding suitable hydrogen storage materials and high-throughput methods.

Chemistry↗

DOE OSTI2022

Pursuing Dark Energy with Large Galaxy Redshift Surveys: Baryon Acoustic Oscillations and Beyond (Final Technical Report)

We have developed and applied methods of large-scale structure from galaxy redshift surveys to the study of dark energy. This program supported my group's development of the baryon acoustic method and our participation in the Dark Energy Spectroscopic Instrument (DESI) survey. In addition to my leadership role in the DESI collaboration, my group at Harvard focused on several topics addressing key needs of the DESI science program. 1) We continued our design, validation, and documentation of DESI target selection of the luminous red galaxy and emission-line galaxy samples. 2) We applied simulations from our novel and extremely fast N-body code to make DESI catalogs. With these, we will search for possible systematic shifts in the acoustic scale due to clustering bias with an unprecedented volume of simulations. 3) We extended our method for the fast construction of covariance matrices for correlation functions. 4) We developed new large-scale structure methods, including density-field reconstruction and three-point function analysis.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

Does jackknife scale really matter for accurate large-scale structure covariances?

ABSTRACT The jackknife method gives an internal covariance estimate for large-scale structure surveys and allows model-independent errors on cosmological parameters. Using the SDSS-III BOSS CMASS sample, we study how the jackknife size and number of resamplings impact the precision of the covariance estimate on the correlation function multipoles and the error on the inferred baryon acoustic scale. We compare the measurement with the MultiDark Patchy mock galaxy catalogues, and we also validate it against a set of lognormal mocks with the same survey geometry. We build several jackknife configurations that vary in size and number of resamplings. We introduce the Hartlap factor in the covariance estimate that depends on the number of jackknife resamplings. We also find that it is useful to apply the tapering scheme to estimate the precision matrix from a limited number of resamplings. The results from CMASS and mock catalogues show that the error estimate of the baryon acoustic scale does not depend on the jackknife scale. For the shift parameter α, we find an average error of 1.6 per cent, 2.2 per cent and 1.2 per cent, respectively, from CMASS, Patchy, and lognormal jackknife covariances. Despite these uncertainties fluctuate significantly due to some structural limitations of the jackknife method, our α estimates are in reasonable agreement with published pre-reconstruction analyses. Jackknife methods will provide valuable and complementary covariance estimates for future large-scale structure surveys.

Favole, Ginevra (ORCID:000000028218563X)↗

DOE OSTI2021

Fully variational incremental CASSCF

We report the complete-active-space self-consistent field (CASSCF) method is a canonical electronic structure theory that holds a central place in conceptualizing and practicing first principles simulations. For application to realistic molecules, however, the CASSCF must be approximated to circumvent its exponentially scaling computational costs. Applying the many-body expansion - also known as the method of increments - to CASSCF (iCASSCF) has been shown to produce a polynomially scaling method that retains much of the accuracy of the parent theory and is capable of treating full valence active spaces. Due to an approximation made in the orbital gradient, the orbital parameters of the original iCASSCF formulation could not be variationally optimized, which limited the accuracy of its nuclear gradient. Herein, a variational iCASSCF is introduced and implemented, where all parameters are fully optimized during energy minimization. This method is able to recover electronic correlations from the full valence space in large systems, produce accurate gradients, and optimize stable geometries as well as transition states. Demonstrations on challenging test cases, such as the oxoMn(salen)Cl complex with 84 electrons in 84 orbitals and the automerization of cyclobutadiene, show that the fully variational iCASSCF is a powerful tool for describing challenging molecular chemistries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1992

The prediction of noise radiation from supersonic elliptic jets

This paper describes the prediction of noise radiation from supersonic elliptic jets. The noise is associated with the large scale structures in the jet mixing layer. These structures are described as instability waves. The local characteristics of the instability waves are determined from a compressible, linear, analysis. The jet mean velocity and density are described in elliptic cylindrical coordinates. The local eigensolution for the instability waves is determined from a finite difference solution of the non-separable boundary value problem. This inner solution which is formulated in terms of the method of multiple scales is matched with the radiated field using the method of matched asymptotic expansions. The form of the far-field directivity is derived. Predictions are presented for the noise radiation by the several modes of instability in the elliptic jet. The radiated field is not axisymmetric and certain modes radiate strongly in the directions of the major and minor axes of the jet. The extension of the present work to other geometries and flow fields is discussed.

Morris, Philip J.↗

NASA NTRS2010

Self-Referencing Hartmann Test for Large-Aperture Telescopes

A method is proposed for end-to-end, full aperture testing of large-aperture telescopes using an innovative variation of a Hartmann mask. This technique is practical for telescopes with primary mirrors tens of meters in diameter and of any design. Furthermore, it is applicable to the entire optical band (near IR, visible, ultraviolet), relatively insensitive to environmental perturbations, and is suitable for ambient laboratory as well as thermal-vacuum environments. The only restriction is that the telescope optical axis must be parallel to the local gravity vector during testing. The standard Hartmann test utilizes an array of pencil beams that are cut out of a well-corrected wavefront using a mask. The pencil beam array is expanded to fill the full aperture of the telescope. The detector plane of the telescope is translated back and forth along the optical axis in the vicinity of the nominal focal plane, and the centroid of each pencil beam image is recorded. Standard analytical techniques are then used to reconstruct the telescope wavefront from the centroid data. The expansion of the array of pencil beams is usually accomplished by double passing the beams through the telescope under test. However, this requires a well-corrected, autocollimation flat, the diameter or which is approximately equal to that of the telescope aperture. Thus, the standard Hartmann method does not scale well because of the difficulty and expense of building and mounting a well-corrected, large aperture flat. The innovation in the testing method proposed here is to replace the large aperture, well-corrected, monolithic autocollimation flat with an array of small-aperture mirrors. In addition to eliminating the need for a large optic, the surface figure requirement for the small mirrors is relaxed compared to that required of the large autocollimation flat. The key point that allows this method to work is that the small mirrors need to operate as a monolithic flat only with regard to tip/tilt and not piston because in collimated space piston has no effect on the image centroids. The problem of aligning the small mirrors in tip/tilt requires a two-part solution. First, each mirror is suspended from a two-axis gimbal. The orientation of the gimbal is maintained by gravity. Second, the mirror is aligned such that the mirror normal is parallel to gravity vector. This is accomplished interferometrically in a test fixture. Of course, the test fixture itself needs to be calibrated with respect to gravity.

Korechoff, Robert P.↗